03. 2. ACGA_L01-L09_2017

Description

AVIÓNICA Quiz on 03. 2. ACGA_L01-L09_2017, created by Ismael Vázquez on 28/03/2018.
Ismael Vázquez
Quiz by Ismael Vázquez, updated more than 1 year ago
Ismael Vázquez
Created by Ismael Vázquez over 6 years ago
77
4

Resource summary

Question 1

Question
1) How is the structure of a subsonic fuselage? pg4
Answer
  • a) It has to verify the Area rule.
  • b) It has to have a smooth contour.
  • c) It has to have a sharp leading edge.
  • d) It has to be 2 times c (understood c as the chord of the wing.)

Question 2

Question
2) Which kind of structure do we use nowadays while constructing aircrafts? pg4
Answer
  • a) Reticulated structure.
  • b) Monocoque structure.
  • c) Semi-monocoque strucure.
  • d) None of the above.

Question 3

Question
3) Which are the differences between the monocoque structure and the semi- monocoque structure?
Answer
  • a) The use of formers.
  • b) The use of strings.
  • c) The use of frames and skin.
  • d) The use of formes and strings.

Question 4

Question
4) Which is the element that isolates the pressurized zone in the plane? pg4
Answer
  • a) Former.
  • b) Bulkhead.
  • c) Stringer.
  • d) Longeron.

Question 5

Question
5) Which loads does the fuselage resist? pg5
Answer
  • a) -Pressure loads.
  • b) -Longitudinal bending.
  • c) -Load distribution and torsion.
  • d) -All of the above.

Question 6

Question
6) Which are the advantages of using honeycombs while doing the floor of the plane? pg5
Answer
  • a) It is cheap.
  • b) It easy to install and cheap.
  • c) It is light and it distributes the loads well.
  • d) None of the above.

Question 7

Question
7) How are the two compartments of the plane connected? pg5
Answer
  • a) By blow out bungs.
  • b) By a small door in the cockpit.
  • c) Opening the rear door of the plane.
  • d) They are not connected.

Question 8

Question
8) What would we see in a civil transport airplane cross-section? pg5
Answer
  • a) A sphere.
  • b) A circle.
  • c) Two semi-circles.
  • d) A ellipse.

Question 9

Question
1) What is the diference between wings tipe braced-monoplanes and cantilever monoplanes? pg5
Answer
  • a) The first uses extentions to hold the wind and the second does not.
  • b) The first one has the wing attached to the fuselage and the second does not.
  • c) The braces are used in high-speed aircrafts.
  • d) All of the above are erroneous.

Question 10

Question
2) What are the wing ́s structural elements? pg5
Answer
  • a) Spars, ribs, stringers.
  • b) Ribs, stringers, skin.
  • c) Spars, ribs, stringers, skin.
  • d) Spar, ribs, stringer, wing tip.

Question 11

Question
3) What is the goal of the spar?
Answer
  • a) Covers the wing to reduce drag.
  • b) Holds loads to bend.
  • c) There are mainly 4 to ridigize the wing.
  • d) A and B are correct.

Question 12

Question
4) What are the ribs?
Answer
  • a) They are a part of the trailing edge used to increase the lift.
  • b) They help the ailerons to move and to be attached to the wing.
  • c) They set the aerodinamic profile of the wing.
  • d) All of the above are incorrect.

Question 13

Question
5) What can be attached to the wings?
Answer
  • a) Hyperlifting elements.
  • b) Control elements.
  • c) Landing gear.
  • d) All of the above.

Question 14

Question
6) What is an advantage of a low-wing? pg6
Answer
  • a) The fuselage weights less.
  • b) The landing gear is short.
  • c) The wing can be manufactured in only one section.
  • d) It has less ground-effect than high-wings.

Question 15

Question
7) What kind of wing would you use to gain aerobatic maneuverability? pg6
Answer
  • a) Low-wing.
  • b) Mid-wing.
  • c) High-wing.
  • d) Delta-wing.

Question 16

Question
8) What are the formerons?
Answer
  • a) Are the prolongation of wing spars.
  • b) Are structures used in commercial aviation.
  • c) Are located in the fuselage.
  • d) They keep the engines attached to the wings.

Question 17

Question
9) Choose the correct option:
Answer
  • a) Track: Distance between the center of the tread of the auxiliar gear and the line joining the main gears.
  • b) Base: Distance between the center of the treads of the main gears.
  • c) Both are true
  • d) Both are false

Question 18

Question
10) Landing gear classification related to linkage to the aircaft main body is: pg7
Answer
  • a) Fixed and aerodynamic
  • b) Aerodynamic and retractable
  • c) Fixed and retractable
  • d) All are false

Question 19

Question
11) Choose the wrong answer about classification of landing gears: pg7
Answer
  • a) Bogies
  • b) Taildragger
  • c) Bicycle
  • d) Noseride
Show full summary Hide full summary

Similar

EXAM TIME FICHAS
Daniela Velasque5264
Importancia de una Edificación
Ricardo Avendaño
FUENTES DE ENERGÍA
Alba Guzman
ACCIONES PARA CONVIVIR EN MEDIO DE LAS DIFERENCIAS
flaviotejada2003
Perfiles, roles y competencias del Psicólogo en el contexto del trabajo
lorena jaramillo
INGENIERÍA MECATRONICA
Ivonne Arango
OMC
katiko
EXAMEN GALOPE 2 - BLOQUE 2
Nieves M. Vicente Sala
CAPITULO12 -ADQUISICIONES
LUIS FERNANDO JUAREZ JIMENEZ
CAPITULO 13 - INTERESADOS
LUIS FERNANDO JUAREZ JIMENEZ
Nomenclatura Química Orgánica
Alan Hernandez7452