ACMP- Aruba Certified Mobility Professional

Description

Examen
Howard Clavijo
Quiz by Howard Clavijo, updated more than 1 year ago
Howard Clavijo
Created by Howard Clavijo over 7 years ago
127
0

Resource summary

Question 1

Question
Which command will show all client association history?
Answer
  • A. Aruba-6000# show mobile trail current (ip address)
  • B. Aruba-6000# show ip mobile trail (ip address)
  • C. Aruba-6000# show ap client status (mac address)
  • D. Aruba-6000# show current client ip (ip address)

Question 2

Question
Which Aruba controllers are able to provide IEEE 802.3af POE? (Choose all the correct answers.)
Answer
  • A. 3200
  • B. 620
  • C. 650
  • D. 6000

Question 3

Question
The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication fails and user authentication fails, which role will be assigned?
Answer
  • A. employee
  • B. guest
  • C. contractor
  • D. Captive Portal
  • E. Logon
  • F. no role will be assigned

Question 4

Question
Which of the following charts are available for selection in Spectrum Dashboard for AP125?
Answer
  • A. FFT Duty Cycle
  • B. Channel Quality
  • C. Active Devices by Channel
  • D. Number of Spectrum Monitors

Question 5

Question
A user connected to a Captive Portal VAP successfully. When the user opens their browser and tries to access their homepage, they get redirected as expected to another URL on the Aruba Controller. However, they see an error message that web authentication has been disabled. What might be a cause of this?
Answer
  • A. The Captive portal profile has not been assigned to the initial role
  • B. The Captive portal profile has not been assigned to the AAA profile
  • C. A server group has not been assigned to the captive portal profile
  • D. An initial role has not been assigned to the AAA profile

Question 6

Question
Which describe "roles" as used on Aruba Mobility Controllers? (Choose all the correct answers.)
Answer
  • A. Roles are assigned to users.
  • B. Roles are applied to interfaces.
  • C. Policies are built from roles.
  • D. A user can belong to only one role at a time.

Question 7

Question
Refer to the above screen capture. By default, which switch's internal database will be used for user authentication?
Answer
  • A. Controller 10.1.11.100 only
  • B. Controller 10.1.11.101 and 10.254.1.3 only
  • C. All three Controllers
  • D. None

Question 8

Question
What are aliases used for?
Answer
  • A. improve performance
  • B. simplify the configuration process
  • C. Tie IP addresses to ports
  • D. assign rules to policies

Question 9

Question
Where are Aruba Vendor Specific Attributes (VSA) programmed?
Answer
  • A. controller
  • B. client
  • C. authentication server
  • D. Internal user database

Question 10

Question
An Aruba based network has a Master and three local controllers. No APs terminate on the Master controller. IDS is desired, so the administrator wants to install the "RFProtect license." On which controller should the license be installed?
Answer
  • A. master controller since it performs the IDS analysis
  • B. the local controllers since the APs terminate there
  • C. all of the controllers
  • D. this isn't the correct license for this purpose

Question 11

Question
In an Aruba based system, the L3 mobility tunnel exists between the home agent and which other element?
Answer
  • A. the default gateway
  • B. the remote AP
  • C. the foreign agent
  • D. the mobile node

Question 12

Question
A customer has a remote AP deployment, where each remote AP has an IPSEC VPN tunnel with L2TP to the controller. 1 of the remote APs is stuck in the user table and hasn't yet transitioned to the AP active table in the controller. The customer suspects that the AP is not setting up its VPN connection successfully. Which of the following commands might be useful in troubleshooting this? Select all that apply.
Answer
  • A. Logging level debugging security process localdb
  • B. Logging level debugging security process l2tp
  • C. Logging level debugging security process dot1x
  • D. Logging level debugging security process crypto

Question 13

Question
What is the maximum number of campus APs supported by a 620 controller?
Answer
  • A. 32
  • B. 8
  • C. 16
  • D. 24

Question 14

Question
The permanent licenses on the controller will be deleted with the use of which command?
Answer
  • A. delete license
  • B. write erase
  • C. Licenses cannot be deleted once activated
  • D. write erase all

Question 15

Question
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. Radius NY returned a standard radius attribute of filter-Id with a value of employee. What Role will the user get?
Answer
  • A. The User will get the Emp Role
  • B. The user will get the 802.1x authentication default Role
  • C. The User will get the employee Role
  • D. The User will get the Employee Role
  • E. The User will get the initial Role

Question 16

Question
Which of the statements below are TRUE regarding ARM's Spectrum Load Balancing feature? (Choose all correct answers)
Answer
  • A. Available only on 5GHz radios
  • B. Disabled by default
  • C. Balances client load across available channels/APs
  • D. Enabled by default

Question 17

Question
Which of the following licenses are consumed by RAP?
Answer
  • A. AP license
  • B. PEF-NG license
  • C. PEF-V license
  • D. No license required

Question 18

Question
The Aruba Policy Enforcement Firewall (PEF) module supports source network address translation (src-nat). Which is a common use of this statement in an Aruba configuration?
Answer
  • A. provide a single source IP address for users in a role
  • B. redirect Captive Portal HTTP sessions
  • C. redirect Access Points to another Aruba controller
  • D. provide IP addresses to clients

Question 19

Question
When configuring ports in the configuration wizard, which of the following are not options for configuration?
Answer
  • A. Inter-VLAN routing
  • B. Source NAT
  • C. Trusted
  • D. LACP

Question 20

Question
In the above screen capture, the administrator notes that the "Save As" and "Apply" buttons are grayed out and have no action. What is the cause of the problem?
Answer
  • A. attempting to make changes on a Master Switch
  • B. attempting changes on a Local Switch
  • C. does not have administrative rights to perform these actions
  • D. does not have the correct software license

Question 21

Question
View the Server group screenshot above A company has provisioned the same VAP, AAA and SSID profiles at both its Miami and NY offices. This Server Group is applied for 802.1x authentication at both locations. The user's credentials are only found in the Miami Radius server Radius Miami. There is no Radius synchronization. What happens when the user attempts to authenticate?
Answer
  • A. The controller recognizes the users Domain and sends the authentication request directly to Radius Miami.
  • B. The request is initially sent to RadiusNY1 then RadiusNY1 redirects, the controller, to send the authentication request to Radius Miami
  • C. RadiusNY1 receives the request and returns a deny. No other action is taken.
  • D. RadiusNY1 receives the request and returns a deny. The authentications request will then be sent to Aruba Certified Mobility Professional 6.1.

Question 22

Question
View the Server group and User Roles screen shots above. A user associated to an SSID with 802.1x using this server group. RadiusNY returned a standard radius attribute of filter-Id with a value of employee. The user was placed in the guest Role. What statements below are correct?
Answer
  • A. The user was placed in the 802.1x authentication default Role guest
  • B. The user was placed in the initial Role guest
  • C. Role derivation failed because roles are case sensitive
  • D. Role derivation failed because the incorrect operation “value-of” was used
  • E. 802.1x authentication failed so the user was automatically placed in the guest Role

Question 23

Question
Refer to the following configuration segment for this item. Ip access-list session a new one user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any permit Based on the above Aruba Mobility Controller configuration segment, which statements best describe this policy? (Choose all the correct answers.)
Answer
  • A. The rule user host 10.1.1.1 any deny is redundant because of the implicit deny all at the end.
  • B. The rule user network 10.1.1.0 255.255.255.0 any permit is redundant because of the user any any permit at the end.
  • C. The two rules user network 10.1.1.0 255.255.255.0 any permit and user host 10.1.1.1 any deny need to be re-sequenced.
  • D. This list is fine as is.

Question 24

Question
Which match condition can be used by a server derivation rule?
Answer
  • A. greater than
  • B. less than
  • C. inverse of
  • D. contains

Question 25

Question
When configuring a server group containing 3 servers, a customer chooses 'fail through mode'. What other feature has to be enabled on the controller for this to work?
Answer
  • A. Machine authentication
  • B. EAP Termination
  • C. Server group fall through mode
  • D. MAC authentication

Question 26

Question
What do you need to generate a feature license key for an Aruba controller?
Answer
  • A. controller's MAC address and the feature description
  • B. controller's MAC address and the certificate number
  • C. controller's Serial Number and the feature description
  • D. controller's Serial Number and the certificate number

Question 27

Question
Which may be applied directly to an interface? (Choose all the correct answers.)
Answer
  • A. Access List (ACL)
  • B. Firewall Policy
  • C. Roles
  • D. RF Plan Map

Question 28

Question
When a user first associates to the WLAN, what role are they given?
Answer
  • A. the guest role
  • B. the stateful role
  • C. the initial role in the server group profile
  • D. The initial role in the AAA profile

Question 29

Question
What new firewall action was added specifically for use with Aruba's Content Security Service? VisualRF supports import of floor plans from:
Answer
  • A. dst-nat
  • B. dual-nat
  • C. route dst-nat
  • D. redirect to tunnel

Question 30

Question
What Wizards can be used to create a new AP Group?
Answer
  • A. AP Wizard
  • B. Controller Wizard
  • C. WLAN/LAN Wizard
  • D. License Wizard
  • E. AP configurations Wizard

Question 31

Question
A customer has configured a 3000 controller with the following commands: Vlan 55 Vlan 56 Vlan 57 Interface gigabitethernet 1/0 switchport mode trunk switchport trunk native vlan 55 switchport trunk allowed vlan 55-57 Which of the following sentences best describes this port?
Answer
  • A. All traffic in vlan 55 will be dropped and all traffic in vlan 56 and 57 will be trunked with and 802.1Q tag
  • B. All traffic in vlan 55, 56 and 57 will be trunked with an 802.1Q tag
  • C. All traffic in vlan 55 will be sent with an 802.1Q tag while vlan 56 and 57 traffic will be trunked untagged
  • D. All traffic in vlan 56 and 57 will be sent with an 802.1Q tag while vlan 55 traffic will be trunked untagged

Question 32

Question
What cannot be configured from the Initial Configuration wizards?
Answer
  • A. Controller name.
  • B. Syslog server and levels.
  • C. User firewall policy.
  • D. User derivation rules.

Question 33

Question
Refer to the following configuration segment for this item. netdestination "internal" no invert network 172.16.43.0 255.255.255.0 position 1 range 172.16.11.0 172.16.11.16 position 2 ip access-list session "My-Policy" alias "user" alias "internal" service_any permit queue low A user frame is evaluated against this access-list with the following attributes: Source IP: 172.17.49.3 Destination IP: 10.100.86.37 Destination Port: 80 Referring to the above file segment, how will the frame be handled by this access-list?
Answer
  • A. The frame will be dropped because of the implicit deny all at the end of the netdestination definition.
  • B. The frame will be dropped because of the implicit deny all at the end of the access list.
  • C. The frame will be forwarded because of the implicit permit all at the end of the access list.
  • D. The frame will be passed because there is no service specified in the access list.
  • E. The frame will be dropped because there is no service specified in the access list.

Question 34

Question
The Aruba controller's Command Line Interface can be accessed from WITHIN the browser based Web User Interface using which method?
Answer
  • A. It's not possible to access the CLI from within the WebUI
  • B. Embedded Telnet client
  • C. Java based SSH client
  • D. Proprietary serial over Ethernet client

Question 35

Question
An Aruba controller can be configured to support which CLI based remote access methods?
Answer
  • A. RSH
  • B. Telnet
  • C. SSH
  • D. Telnet and SSH
  • E. SSH and RSH

Question 36

Question
By default, which CLI based remote access method is enabled on Aruba controllers?
Answer
  • A. rsh
  • B. Telnet
  • C. SSH
  • D. Telnet and SSH
  • E. Telnet, SSH and rsh

Question 37

Question
Masters communicate configuration information with locals using which tunnel type?
Answer
  • A. GRE
  • B. IP in IP
  • C. Provisión Tunnel Protocol
  • D. IPSec

Question 38

Question
In all unmodified default AAA profiles, in which default initial role is the user placed?
Answer
  • A. trusted-ap
  • B. guest
  • C. pre-guest
  • D. logon

Question 39

Question
Which tunnel protocol is used between controllers to support L2 mobility in an Aruba environment?
Answer
  • A. Basic IP
  • B. GRE
  • C. IPinIP
  • D. Mobile IP
  • E. None of the above

Question 40

Question
How does the ARM's Band Steering feature encourage 5GHz capable clients to move/connect to the 5GHz radios of Aruba APs?
Answer
  • A. ARM “hides” the 2.4GHz radios from 5GHz capable clients
  • B. ARM utilizes third party software on the wireless clients
  • C. Current Wi-Fi chipset firmware supports this by default
  • D. It's not possible the move clients to 5GHz radios when they can see both 2.4 and 5GHz APs

Question 41

Question
What type of license is required on the Aruba S3500 for tunneled node operation?
Answer
  • A. PEF-NG
  • B. No license is required
  • C. Tunneled node license for each wired AP
  • D. Tunneled node license for each S3500

Question 42

Question
ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny user any any permit Referring to the above portion of a Mobility Controller configuration file, what can you conclude? (Choose all of the correct answers.)
Answer
  • A. This is a session firewall policy.
  • B. This is an extended Access Control List (ACL).
  • C. Any traffic going to destination 10.1.1.1 will be denied.
  • D. Any traffic going to destination 10.2.2.2 will be denied.
  • E. Any traffic going to destination 172.16.100.100 will be permitted.

Question 43

Question
Which method is NOT supported to provision an Aruba thin AP?
Answer
  • A. Telnet directly to AP
  • B. SSH to the AP's controller
  • C. Web interface to the AP's controller
  • D. Console to AP

Question 44

Question
Which of the following APs do not support dual radio operations? (Choose all the correct answers.)
Answer
  • A. RAP - 5
  • B. AP 125
  • C. AP 120
  • D. AP 124

Question 45

Question
When roaming, by default which device will decide when to handoff / move to another AP?
Answer
  • A. Aruba AP
  • B. Aruba controller
  • C. Client PC
  • D. Radius Server
  • E. Router

Question 46

Question
Referring to the above screen capture, if an administrator desires to change a specific AP into an AM without assigning the AP to a new group, which menus could be used?
Answer
  • A. Network > Controller
  • B. Wireless > AP Configuration
  • C. Wireless > AP Installation
  • D. Advanced Services > Wireless
  • E. Advanced Services > All Profiles

Question 47

Question
Which log type should be enabled to troubleshoot IPSec authentication issues on Aruba Controllers?
Answer
  • A. Security Logs
  • B. Management Logs
  • C. Wireless Logs
  • D. IDS Logs

Question 48

Question
Referring to the above screen capture, on which switch can you create a vlan?
Answer
  • A. Controller 10.1.11.100 only
  • B. Controller 10.1.11.101 and 10.254.1.3 only
  • C. All three Controllers
  • D. None

Question 49

Question
In a campus environment, where are encryption keys sent or stored when users roam from AP to AP on the same controller using 802.1X?
Answer
  • A. sent to the new AP via GRE
  • B. sent to the new AP vía IPSec
  • C. stored on the controller
  • D. stored on the RADIUS server

Question 50

Question
What is the best practice regarding licensing for a backup master to support Master Redundancy?
Answer
  • A. Backup master only requires the AP license
  • B. License limits should be the same on primary master and backup Master
  • C. Licenses are pushed from the primary to the backup Master along with the configuration
  • D. Backup Master does not require licenses to support master redundancy

Question 51

Question
The screen captures above show the 802.1X authentication profile and AAA profile settings for a VAP. If machine authentication passes and user authentication passes, which role will be assigned?
Answer
  • A. employee
  • B. guest
  • C. contractor
  • D. logon
  • E. you can't tell

Question 52

Question
What additional fields must be configured in the configuration wizard if the controller role is selected as a local instead of a standalone controller?
Answer
  • A. The Local's SNMPv3 user name and password
  • B. The Master IP address
  • C. The Local's loopback address
  • D. The IPSec PSK for Master/Local communication

Question 53

Question
ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user any any permit host 10.1.1.1 host 10.2.2.2 any deny A user sends a frame with the following attributes: Source IP: 10.1.1.1 Destination IP: 10.2.2.2 Destination Port: 25 Based on the above Mobility Controller configuration file segment, what will this policy do with the user frame?
Answer
  • A. The frame is discarded because of the implicit deny all at the end of the policy.
  • B. The frame is discarded because of the statement: user host 10.1.1.1 host 10.2.2.2 deny.
  • C. The frame is accepted because of the statement: user any any permit.
  • D. The frame is accepted because of the statement: user network 10.1.1.0
  • E. This is not a valid policy.

Question 54

Question
Which of the following statements allows a user to initiate an HTTP session to other devices?
Answer
  • A. any alias internal-nets svc-dns permit
  • B. user any svc-http permit
  • C. user user svc-http permit
  • D. any any svc-http permit

Question 55

Question
When creating a firewall policy, which of the following parameters are required? (Choose all the correct answers.)
Answer
  • A. Destination
  • B. Service
  • C. Source
  • D. Log
  • E. Action

Question 56

Question
As an admin/root user, what other types of role-based management users can be created on Aruba controllers? (Choose all the correct answers)
Answer
  • A. Auditing-compliance user
  • B. Read only user
  • C. Location-api-management user
  • D. Guest provisioning user

Question 57

Question
The above diagram has one master and three local controllers. All controllers are configured with the wireless user VLAN 201. A wireless user associates with AP 1. Only L2 mobility is enabled. Which elements will know about this association? (Choose all of the correct answers.)
Answer
  • A. Local 1
  • B. Local 2
  • C. Local 3
  • D. Master

Question 58

Question
Which profiles are required in an AP Group to enable an SSID with VLAN 1, WPA2 and LMSIP?
Answer
  • A. Virtual-ap ap mesh-radio-profile ap system profile
  • B. Wlan ssid-profile ap-system-profile virtual-ap profile
  • C. Virtual-ap profile ap-system profile aaa profile
  • D. 802.1X authentication profile wlan ssid-profile virtual-ap profile

Question 59

Question
The network administrator wishes to terminate the VPN encryption on the Aruba controller. When writing a firewall rule to accomplish the task of automatically moving the VPN traffic for the wireless clients from a third party VPN concentrator to an Aruba controller, which action needs to be configured in the rule?
Answer
  • A. redirect to ESI group
  • B. source NAT
  • C. destination NAT
  • D. redirect to tunnel

Question 60

Question
Which is an Aruba specific DSA that can be used in a user derivation rule?
Answer
  • A. user login name
  • B. authentication server
  • C. location
  • D. controller Loopback address

Question 61

Question
The reusable wizards are accessible in which one of the following ways?
Answer
  • A. On startup through the CLI
  • B. Through the CLI, after the initial CLI wizard has been completed
  • C. In the Web UI under maintenance.
  • D. In the Web UI under configuration.

Question 62

Question
Which of the following APs support remote AP operation?
Answer
  • A. AP 105
  • B. AP 125
  • C. RAP2
  • D. All of the above

Question 63

Question
Referring to the above screen capture, on which switch can you modify APs to enable ARM?
Answer
  • A. Controller 10.1.11.100 only
  • B. Controller 10.1.11.101 and 10.254.1.3 only
  • C. All three Controllers
  • D. None

Question 64

Question
Which of the following statement is true of the Spectrum Mode?
Answer
  • A. No licenses are required to run an AP in Spectrum mode
  • B. Spectrum mode can only be configured for one AP at a time
  • C. An AP can be in spectrum mode for both 2.4 and 5G bands at the same time
  • D. Spectrum Mode is configured under Spectrum Profile

Question 65

Question
Which types of encryption will an Aruba access point perform on traffic sent through a Campus AP Virtual AP (VAP) profile in Tunnel forwarding mode?
Answer
  • A. TKIP & AES
  • B. WEP & TKIP
  • C. WEP & AES
  • D. WEP, TKIP, & AES
  • E. None of the above

Question 66

Question
When are the system-defined default roles added to the configuration on the controller?
Answer
  • A. when the controller is first booted
  • B. when an RF Proctect license is added to the controller
  • C. when created manually
  • D. when a PEF-NG license is added to the controller

Question 67

Question
Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose all the correct answers.)
Answer
  • A. AAA default role for authentication method
  • B. Server Derivation Rule
  • C. Vendor Specific Attributes
  • D. AP Derivation Rule

Question 68

Question
What are the Airtime Allocation Policy options for Airtime Performance Protection?
Answer
  • A. Default Access
  • B. Priority Access
  • C. Fair Access
  • D. Preferred Access
  • E. Distributed Access

Question 69

Question
What is the function of Band Steering?
Answer
  • A. Balancing clients across APs on different channels within the same band
  • B. Encourages clients, 5GHz capable, to connect on the 5GHz spectrum
  • C. Coordinate access to the same channel across multiple APs
  • D. Enables selection of 20 vs. 40 MHz mode of operation per band
  • E. Enables acceptable coverage index on both the “b/g” and “a” spectrums

Question 70

Question
Which settings can be modified directly from a local controller? (Choose all correct
Answer
  • A. Port VLAN setting
  • B. Switch Time Zone
  • C. Port trusted
  • D. Roles
  • E. SNMP Enable Trap Generation

Question 71

Question
Review the following truncated output from an Aruba controller for this item. (Example) #show rights logon Derived Role = 'logon' Up BW:No Limit Down BW:No Limit L2TP Pool = default-l2tp-pool PPTP Pool = default-pptp-pool Periodic reauthentication: Disabled ACL Number = 1/0 Max Sessions = 65535 Based on the above output from an Aruba controller, an unauthenticated user assigned to the logon role attempts to start an http session to IP address 172.16.43.170. What will happen?
Answer
  • A. the user's traffic will be passed to the IP address because of the policy statement: user any svc-http dst-nat 8080
  • B. the user's traffic will be passed to the IP address because of the policy statement: user any svc-https dst-nat 8081
  • C. the user's traffic will be passed to the IP address because of the policy statement: user any svc-http-proxy1 dst-nat 8088
  • D. the user will not reach the IP address because of the policy statement: user any svc-http dst-nat 8080
  • E. the user will not reach the IP address because of the implicit deny any any at the end of the policy.

Question 72

Question
Which actions does ARM (Adaptive Radio Management) perform? (Choose all correct answers.)
Answer
  • A. allows controllers to provision the AP Radio type
  • B. allows controllers to provision the best channel for APs
  • C. allows controllers to provision the best power setting for APs
  • D. attempts to Self Heal in case of an AP failure

Question 73

Question
When you create a WLAN SSID in the WLAN/LAN wizard what AP group is it automatically added to?
Answer
  • A. The air-monitors group
  • B. The first configured AP group
  • C. The Default AP group
  • D. It is only added to the 'All Profiles' section

Question 74

Question
In the diagram provided for this question, the wireless user's laptop is associated with an Aruba AP's Virtual AP profile in tunnel forwarding mode. When the client transmits, where will the 802.11 headers be removed?
Answer
  • A. A
  • B. B
  • C. C
  • D. D

Question 75

Question
As a user moves through the authentication process, which of the following is not used in a derivation rule?
Answer
  • A. MAC address
  • B. OS version
  • C. SSID
  • D. Radius attribute

Question 76

Question
A campus AP has been provisioned with a VAP in bridge forwarding and standard operation modes. Which of the following authentication types are supported?
Answer
  • A. 802.1X authentication
  • B. Open System authentication
  • C. Machine authentication
  • D. Captive portal authentication

Question 77

Question
The Aruba Policy Enforcement Firewall (PEF) module supports destination network address translation (dst-nat). Which is a common use of this statement in an Aruba configuration?
Answer
  • A. source the IP addresses of users to specific IP address
  • B. redirect HTTP sessions to Captive Portal
  • C. redirect Access Points to another Aruba controller
  • D. provide a telnet connection to the controller

Question 78

Question
Which netdestination aliases are built into the controller? (Choose all the correct answers.)
Answer
  • A. mswitch
  • B. any
  • C. user
  • D. guest

Question 79

Question
What are the PEF-NG license limits based on?
Answer
  • A. Number of APs
  • B. Limit One per controller
  • C. Number of users
  • D. Number of local controllers

Question 80

Question
Which statement is true about the Content Security License?
Answer
  • A. Applied to the master controller
  • B. Applied to all the controllers in the network
  • C. It is based on number of users
  • D. It is based on number of APs

Question 81

Question
Aruba access points are logically connected to controllers using which protocol?
Answer
  • A. 802.1q
  • B. LWAPP
  • C. PPTP
  • D. GRE

Question 82

Question
The configuration wizard enables which of the following controller clock configurations?
Answer
  • A. NTP to a time server
  • B. Manually setting the date time
  • C. Daylight savings time
  • D. Only GMT can be configured

Question 83

Question
Which of the following controllers has an integrated single radio AP?
Answer
  • A. 3200
  • B. 620
  • C. 650
  • D. 651

Question 84

Question
Which access point models support concurrent operations in both the “b/g” band as well as the “a” band? (Choose all the correct answers.)
Answer
  • A. RAP2
  • B. AP-120
  • C. AP-105
  • D. AP-125
  • E. AP-135

Question 85

Question
By default, how long will an AP scan a single channel when ARM is enabled?
Answer
  • A. 80 milliseconds
  • B. 90 milliseconds
  • C. 100 milliseconds
  • D. 110 milliseconds

Question 86

Question
Referring to the above screen capture, on which switch can you add an administrative user and assign a switch management role?
Answer
  • A. Controller 10.1.11.100 only
  • B. Controller 10.1.11.101 and 10.254.1.3 only
  • C. All three Controllers
  • D. None

Question 87

Question
Which of the following metrics does the ARM feature use to calculate the optimal channel and power level for Access Points? (Choose all correct answers)
Answer
  • A. RF Spectrum Index
  • B. Priority Index
  • C. Interference Index
  • D. Coverage Index

Question 88

Question
A customer forgot all passwords for a controller. What method could you use to reset the passwords?
Answer
  • A. Telnet to the controller and login to the password recovery account
  • B. SSH to the controller and login to the password recovery account
  • C. Connect directly to the serial console and login to the password recovery account
  • D. Interrupt the boot process at CP-boot and select password recovery
  • E. Open the controller and press the reset switch

Question 89

Question
Other than a user role, what attribute can be applied to a user with a derivation rule?
Answer
  • A. SSID
  • B. MAC
  • C. VLAN
  • D. IP Address

Question 90

Question
Where in the network can Aruba controllers be deployed?
Answer
  • A. access
  • B. distribution
  • C. core
  • D. all of the above
Show full summary Hide full summary

Similar

ACMP Aruba parte 2
Howard Clavijo
Cold War (1945-1975)
sagar.joban
Bayonet Charge flashcards
katiehumphrey
SMART School Year Goals
Alice McClean
The Tempest Key Themes
Joe Brown
“In gaining knowledge, each area of knowledge uses a network of ways of knowing.” Discuss this statement with reference to two areas of knowledge
Julianapabab
Prueba de Integrales
José William Montes Ocampo
Get your grammar right!
Sarah Holmes
The Skeleton and Muscles
james liew
2PR101 1.test - 4. část
Nikola Truong
The Gastrointestinal System- Physiology- PMU
Med Student