Which three elements must be configured in Avaya Aura® Communication Manager to build an H.323 Trunk? (Choose three)
ISDN Trunk Group
E1/T1 Trunk Group
H.323 Signaling Group
SIP Signaling Group, changing it to H.323 type afterwards
Name/IP-Address entry to the Node-Names IP table
Which two backup methods are available for Avaya Communication Manager (CM) through the SMI Web Interface? (Choose two.)
local (to CM own local Hard-Disk)
remote via RAS protocol onto an external file server
remote via SCP protocol onto an external file server
remote via SMS messages
remote via FTP onto Avaya Aura® Media Server’s data storage
Which three products comprise the Collaboration Bundle? (Choose three.)
Session Border Controller for Enterprise (SBCE)
Media Server (AAMS).
Avaya Scopia Solution
Conferencing (AAC)
Application Enablement Services
Which Avaya product provides one interface for administering and managing multiple Avaya products and users?
Media Server (AAMS)
Communication Manager (CM)
System Manager (SMGR)
Session Manager (SM)
Which two products are Avaya Core Components? (Choose two.)
System Manager
Avaya Session Border Controller
Communications Manager
Conferencing
Multimedia Messaging
On which platform is Solution Deployment Manager (SDM) used to deploy Avaya applications?
Windows 8 Server
System Platform
Application Visualization Platform (AVP Host)
CentOS
What new technologies did Avaya create between Avaya 6.x into Avaya 7.x?
support for system platform
Avaya Virtualization Platform (AVP)
support for VMware
new XEN technology
Which three functions are provided by Avaya Media Server? (Choose three.)
Conversion between TDM and VoIP
Call Routing
Provides other Avaya Aura® Components with DSP Resources
Transcoding
Announcements
Which two Virtualization Models are supported by Avaya? (Choose two.)
Combined Application Model
Appliance Model
Solution Module
Virtualized Environment Model
Virtualization Platform Model
If the Tenant Partitioning feature is enabled, which command is used to change a Class of Service?
change class group 1-100
change cos group 1-100
change cos
change cos group
Which three features does Utility Services (US) provide? (Choose three.)
Delivers certificates to IP endpoints
SDM Solution.
DHCP, TFTP, and HTTP Servers.
Services Port for AVP.
Engagement Development Platform
Which event triggers the activation of Avaya Communication Manager (CM) Survivable Server so it can accept H.323 registrations and/or make IP trunks active?
a broadcast message from the Main CM Server right before it goes in failure
the first H.323 Registration Request the CM Survivable Server receives from any H.323 Endpoint, after the Endpoint loses contract with the Main CM Server
the interruption in the RAS keep alive link between CM Main and CM Survivable Servers
the availability of DSP Resources in the CM Survivable Server, the registration of either a Media Gateway or Media Server with that CM Survivable Server
In a survivable Core solution, for Avaya Communication Manager (CM) Main Core to successfully send its translations to the Survivable Remote Server, the following actions must take place. Which three actions need to be performed to make this happen? (Choose three.)
File Synchronization Address(s) must be configured in SMI of Survivable Server to point to Core CM.
Survivable CM Server must register with Processor Ethernet or CLAN of Main Core
Survivable server and Core CM(s) must have same “Server ID”.
Survivable server and Core CM must have different Module IDs (MID)
How do H.323 Endpoints know which Survivable Server to contact for registration in failover mode?
The Node-Name of the Survivable Server must be entered in the IP-Network-Region SAT form for the
323 endpoints within that Network Region
The IP address of the Survivable Server must be manually entered in each H.323 endpoint client device
The Survivable Server broadcast its own IP address through the entire network so the Endpoints learn about the Survivable Server automatically.
To make an Avaya Aura® Communication Manager (CM) Survivable Server work successfully, which two interfaces must be configured? (Choose two.)
the IP address of the FTP Backup Server that holds the latest Backup copy of the CM Main Server
the IP Address of the Media Gateways and Avaya Aura® media Servers that will register with it during failover mode
the IP address of all Endpoints that will register with it upon an outrage
the individual IP address of the two CM Main Servers in a Cluster (or the only Main CM Server if Simplex) for ACP Translations-file Synchronization
the Processor Ethernet or C-Lan board (in legacy installations) for RAS Keep-alive registration with the Main CM Server.
In Avaya 7.x, when you add a Branch Session Manager (BSM) instance in Avaya Session Manager (SM) Administration, by default, it gets added in which state?
Accept New Service
Deny New Service
Maintenance Mode
Offline
Which protocol is used for sending Feature Buttons and Dial Plan information to an Avaya Communication Manager controlled SIP Endpoint, also known as Avaya SIP Telephone (AST)?
STUN/TURN
H.248
Personal Profile Management (PPM)
Session Description Protocol (SDP)
A large Enterprise is using an Avaya Core. An Avaya SIP Endpoint, one-X?Communicator, controlled by Communication Manager (CM), has been configured with three feature buttons, but none of the buttons appear on the telephone interface The telephone shows successful registration with Avaya Session Manager (SM) at the SIP Level.
The SM Server is down
The telephone is pointing to CM instead of SM for registration
CM has no DSP Resources available
The SIP Signaling Group between SM and CM is down
The Application Sequence for CM has not been selected for that extension in SM************
You need to convert a one-X?Communicator from H.323 mode to SIP. You have accessed the settings menu and checked the SIP radio button. You need to enter the SIP domain, but the SIP domain field is not being displayed Why is this happening?
The SIP TLS certificate needs to be installed
You need to Enable SIP in the Preferences menu
This version of one-X?Communicator only supports H 323.
The softphone needs to restart to offer the correct menu
When you attempt to login your one-X?Communicator using TLS it fails displaying a Login Error:”;The security certificate required for login is not installed Please contact your support team.” What must be done to fix this error ?
Install the SM Identity certificate into the Trusted Root Certificate Authorities on CM.
Import the identity Certificate from the Security menu of the one-X?Communicator
Install the Certificate Authority certificate that signed Session Manager’s (SM) Identity certificate into the Trusted Root Certificate Authorities on the PC.
Export the identity certificate from Avaya Aura® Session Manager and Import it into the PC using copy and paste
To make up the Avaya Core, which three link or relationships are the minimum that must be built? (Choose three.)
an LDAP link from Avaya Aura® System Manager (SMGR) to the corporate Directory Server
a SIP Trunk between Communication Manager (CM) and Avaya Aura® System Manager (SMGR)
a trust relationship between Avaya System Manager (SMGR) and Avaya Session Manager (SM)
a CM managed element to Avaya System Manager (SMGR)
a SIP Trunk between Avaya Session Manager (SM) and Avaya Communication Manager (CM)
What is the Avaya Media Server?
It is a multi-media conferencing engine with web-scheduling capabilities
It IS a software-based media server, providing soft DSP/media channel resources
It is a hardware-based multi-processor providing routing capabilities to the Branch Office
It is a Social Media platform that hosts shared videos in a cloud
After deploying an Avaya Communication Manager (CM) Duplex pair, and configuring the cluster in SMI to form an HA System, you decide to start configuring the system using SAT On entering SAT, on the active server you discover the “Add* option is missing from the list of commands available when you press F5. Which action would you take to solve this problem?
Execute save translations and then reset system 4
Install the CM license on WebLM and point CM to the WebLM IP address
Install the CM authentication file.
Reboot both Active and Standby servers.
You have performed the following tasks to check Communication Manager (CM) is ready for service: – CM Server Web Communication Interface access. – CM SAT Application Configuration Interface access. – Install the authentication file. – Verify that CM is using the right Licensing Server and license is installed. – Verify CM Version. You try to register an H 323 telephone but it is being rejected by CM. What is causing the problem?
No DSPs have been configured yet, so il is normal for the registration to be rejected.
No Signaling Group or Trunk Group has been configured to Avaya Session Manager (SM)
The COR of the station needs to be changed to allow registration
The H 323 telephone needs firmware upgrading.
You have configured a TLS link between Communication manager {CM) and Session Manager (SM). SM is using Identity certificates that have been signed by System Manager (SMGR) Certificate Authority (CA). What are three of the things that need to be done for the signaling link between CM and Session Manager (SM) to come into service? (Choose three.)
Download “binaty/to IE” from Avaya Aura® System Manager (SMGR).
Upload CA certificate to CM using ‘Miscellaneous/Download files” on SMI screen.
Download ‘PEM file” from System Manager (SMGR)
Add the CA certificate to CM using “Security/Trusted Certificates*.
Export SM Identity certificate from SMGR and import it intoCM suing ‘Security/Trusted Certificates”.
Which statement about making Communication Manager (CM) work successfully as a feature server for CM SIP Endpoints (AST Endpoints) is true?
CM does not support SIP Endpoints in 7.x.
A SIP Trunk between CM and Session Manager (SM) is enough, no further administration is required
CM must be added as an Application, in an Application Sequence for Session Manager (SM).
Endpoint must register directly with CM.
Which two options represent a function of a Digital Signal Processor (DSP)? (Choose two.)
Convert from Signaling to Audio.
Convert between two different Codecs
Analyze and route SIP Signaling.
Convert between Analogue speech & Digital Audio.
Perform Gatekeeper functions
You have configured Communication Manager (CM) as a Managed Element in System Manager (SMGR), but discover that changes made to translations using SAT are not being updated in the SMGR copy of the CM database Which check box on the Inventory screen has not been checked for the CM element?
Send Updates To SMGR
Sync With SMGR
Inform SMGR Of SAT Changes
Enable Notifications
How many servers does the Communication Manager (CM) High Availability Duplex Cluster have?
2 servers (1 Active+1 Standby)
2 servers(2 Active+0 Standby)
4 servers (2 Active* 2 Standby)
3 servers (2 Active+1 Standby)
What are two main roles of System Manager? (Choose two.)
User Profile Management
RTCP Network Monitoring
Quality of Service Management
Centralized Product Management
Network Switching Management
Form the System Manager web GUI, which protocol can be used to create a backup file on the local file system or a Remote Server?
SSH
FTP
SCP
Telnet
What are two functions of Session Manager (SM)? (Choose two.)
Ad as an H.323 call controller
Acts as a registrar to SIP endpoints
Act as an H.323 routing engine
Register digital (DCP) and H.323endpoints
Act as a sophisticated SIP routing engine
How would you run the SIP tracing tool in Avaya 7.x?
Execute traceSM from the command line of System Manager (SMGR).
Execute traceSM from the command line of Session Manager (SM).
Execute IraceSM from the SMI of Communication Manager (CM).
Execute traceSIP from the command line of Communication Manager (CM).
Which three configuration points are necessary before you can build a Network Routing Policy? (Choose three.)
Location
User Profile
Communication Manager (CM) Profile
Domain
SIP Entity
When a Simple SIP Phone (SST). without CM Features, registers to Core, the IP Address of which interface must be configured at the endpoint for registration’?
Session Manager SM100 IP Address
Session Manager Management IP Address
System Manager IP Address
Communication Manager IP Address
What are the characteristics of a Half Call Model that is used by Session Manager (SM)?
Half of the call is processed by SM, and the other half is processed by an Application Server
SIP User Agents are sent to application server(s) defined by Origination Application Sequence for originated calls and Termination Application Sequence for terminating calls
SM a works for incoming calls and the SM b works for outgoing calls.
Half of the call is processed by SM and subsequent processing is performed by Avaya Aura® Communication Manager (CM).
Ping attempts are failing to the SM100 IP address of a newly deployed SM, and you discover the problem is due to an incorrectly configured SM100 default gateway router address Which action would you take to correct this configuration?
Execute runs mconsole
Use System Manager (SMGR) web GUI to edit the SM Instance under SM Administration.
Execute SMnetSetup
Use System Manager (SMGR) web GUI to edit the SIP Entity screen under Routing
What can be done from the Session Manager (SM) Dashboard in System Manager (SMGR)?
You can select each administered SM for each SIP-User
You get information status and health summary of each administered SM
You can administer (create new user) each administered SM
You can import data (synchronized) from each administered the SM
In Communication Manager, which three options correspond to common maintenance commands? (Choose three.)
Status
Release
Shutdown now -r
Busyout
Remove Station
Solution Deployment Manager (SDM) allows you to install and administer applications on Host ESXI servers. Which three statements are true? (Choose three.)
SDM can be installed on Macintosh
SDM can be downloaded as an Android application on a tablet
SDM can be installed as client on your laptop
SDM comes as part of System Manger 7.x
SDM can install Session Manager (SM) on Avaya Virtualized Platform
Which statement about how Session Manager (SM) installs an Authentication file is true?
It uses the System Manager (SMGR) web GUI to install the authentication file from the SM Dashboard
Tt does not install the authentication file because it is no longer required in 7.x.
it transfers the authentication file to SM using FTP and execute the load auth-l <auth filename>.
It transfers the authentication file to SM using SFTP and execute the load pwd-l <auth file name>
In 7.x, where are the listening ports defined to allow Session Manager (SM) to listen for User Agent (s) registrations?
Communication Profile
SM Firewall
SM Administration
You need to enable to digit 8 to be used as the AAR access code. Which SAT command would you use to define the digit 8 as the AAR access code?
change an analysis
change an parameters
add an parameters
change feature-access-code
If you administer an Avaya Aura® Communication Manager from the Service Port, what must be the IP Address of your Laptop?
192.11.13.6
192.11.13.5
255.255.255.252
192.168.11.1
When creating a H.323 Trunk Group, in the Communication Manager trunk group SAT form, what do you set as the “Group Type” field?
H323
SIP
IP
ISDN
The “Single Button Press-Park Pickup” feature, new in Aura 7.x, combines Call Park and Call Pickup functionalities to achieve a better user experience. Which three statements about this feature are correct? (Choose three.)
The “Allow parked Calls to be picked up Inside Pickup Group” feature can be changed anytime
Members can answer parked calls simply by pressing their call-park button
The parked call triggers call pickup alerting to all members of their pickup group
A user delegates a call to other team members simply by parking the call
With a single button press, users can pick up calls parked by another team member
Which statement regarding the backup process in Communication Manager (CM) is true?
CM Backup saves the last saved ACP (Avaya Call Processing) Translation from the CM Local Hard-Disk into a local removable Memory Drive only
CM Backup saves the last saved ACP (Avaya Call Processing) Translation from the CM Local Hard-Disk into a default ftp local directory which can be copied to a remote safe Hard-Disk location.
CM Backup saves the CM Database from volatile Memory directly into a remote safe Hard-Disk location
CM Backup by default saves the ACP (Avaya Call Processing) Translations into a remote safe Hard-Disk Location
In Avaya , which interface must an H.323 Endpoint be configured to register with?
Session Manager SM-100
Media Server.
System Manager Server.
Communication Manager Processor Ethernet
When you administering Communication Manager 7.x, what is the number-range you can use to identify a Class or Restriction (COR)?
250
0-15
0-995
0-255
What are the three key roles and functions of Avaya 7.x System Manager? (Choose three.)
QoS Network testing
Certificate Authority (CA) enabling secured network
SIP Proxy Server (SPS)
event and alarm Monitoring SNMP
single sign-on to central management interface
In System Manager (SMGR), the option”;Home/Services/Events/Alarm”; is used to perform which three functions? (Choose three.)
Change the status of an alarm.
Export alarms
View an alarm
Get the dashboard information of Session Manager
Add new custom alarms
Which statement regarding the System Manager (SMGR) Log and Alarm exporting capabilities is true?
Logs and Alarms are exported using the Log Harvester.
Both Alarms and Logs can be exported form their respective viewers
Alarms can be exported but logs cannot
Alarms and logs can be exported but logs need to harvested first.
How would you deploy System Manager (SMGR) onto an Appliance Virtualization Platform (AVP)?
Run the SMGR Installer from AVP command line
Use AVP web GUI.
Use Solution Deployment Manager (SDM) client installed on a PC
Use Utility Services web GUI
You want to check that System Manager (SMGR) and Session Manager (SM) are communicating with each other, and ensure the database in SM is the same as in SMGR. How would you check this?
PuTTY to Session Manager and execute st at usapp, and check that all processes are started
Register an Avaya SIP Telephone(AST) and check to see its feature buttons
Check in the Replica Group with a green “Synchronized”
Check in the Replica Group with a green “Session Manager OK”.
Which statement about the Session Manager (SM) license is true?
Session Manager license will be installed on System Manager, and the Server Host ID is the Server ID of the embedded WebLM Server in System Manager.
Session Manager license Server HostID is the MAC ID of Session Manager.
Session Manager license will be installing on Session Manager, and the Server Host ID is the Server ID of System Manager.
Session Manager needs no license
What is the Avaya supported method of backing up an Session Manager (SM) data base?
Perform the backup from an System Manager
Connect a Memory Drive into the SM Server with an automatic Backup-making script.
Access the SM Command Line Interface (CLI) and perform a Backup manually
Wait for the overnight Backup process to send you a copy of the tar file automatically
During a deployment of Session Manager (SM>; you notice that SM did not successfully establish trust with System Manager (SMGR), due to an incorrect SMGR IP Address entered during SDM deployment Which action needs to be taken to correct the problem?
Edit/etc/hosts file on SM using vi editor and reboot SM
Edit/etc/hosts file on SM using vi editor and then execute mitTM-f.
Use SMGR web GUI to correct the error in SM Administration then reboot SM
Run SMnetSetup
Which statement about Branch Session Manager in 7.x is true?
It is a combined Communication Manager (CM), Branch Session Manager (BSM) and Utility Server (US) Template in OVF format
it IS a solution template
it is a standalone OVA Open Virtualization Application
it is a combined Communication Manager (CM) and Branch Session Manager (BSM) Template
Which configuration step is necessary to make a Simple SIP Phone register successfully with Session Manager (SM)?
Create a Communication Manager Profile for that user
Add a Routing Profile for that endpoint
Build a SIP Trunk to Communication Manager
Create a Communication Profile for that SIP User
Which process will allow you to see the status of the Communication Manager (CM) processes?
System Manager; Communication Manager dashboard
Putty to CM; execute app status
CM System Management Interface (SMI), Navigate to Server/Process Status
System Manager; Navigate to Inventory/Communications Manager/Status
Which three actions can be performed together to save CM translations to CM disk, and make a copy be sent to every survivable server? (Choose three)
Execute satr all from SAT.
System Manager (SMGR) Services> Backup and Restore
System Manager (SMGR) launch Element Cut-Through
From Inventory Synchronization > Communication System.
Execute the Linux satrans all command
You try to add a new station starting with the digit 7 that has never been used before. How do you enable stations to be built with this new range?
Add dial plan analysis 7
Change dial plan analysis
Which three interfaces can be used to add, change, and remove a CM H.323 Endpoint? (Choose three.)
Linux Command Line at CM Server
Communication Manager” Administration menu at System Manager (SMGR).
Avaya Site Administration Terminal Emulation
SMI Web-Interface at CM Server
SAT terminal via SSH-session (for example, Putty).
In Communication Manager (CM), to create new codes to activate/deactivate call forwarding, which SAT command must you use?
new feature-code
add feature call-forward
change fac
Which product from the Communication Bundle provides security for the solution addressing issues in SIP-based networks?
Messaging (AAM)
Session Border Controller (SBCE)
Application Enablement Services (AES)
Which Avaya product orchestrates routing of SIP sessions across the network?
Which three components can be deployed as virtual machines? (Choose three.)
Gateways (GW)
Avaya Virtual Services Platform (VSP) 7200 series
When deploying applications on Application Virtualization Platform (AVP), to allow network, connectivity through the services port on each AVP host server, which additional application must be also deployed?
Secure Access Link (SAL) Gateway
Avaya Diagnostic Server (ADS)
Utility Services (US)
