use RG-6 cables

A can connect the two LANs.

the users on each enjoy much faster response times when accessing resources, and administrative tasks are a lot easier, too.

are often seriously powerful computers that run more than one central processing unit (CPU) and whose are available to other users on the network to access when needed

A machine is any device on the network that can ask for access to resources like a printer or other hosts from a server or powerful workstation.

The terms workstation, client, and can sometimes be used interchangeably. Computers have become more and more powerful and the terms have become somewhat fuzzy because can be clients, workstations, servers, and more! The term is used to describe pretty much anything that takes an IP address.

are also powerful computers. They get their name because they truly are “at the service” of the network and run specialized software known as the network operating system to maintain and control the network

In a good design that optimizes the network’s performance, are highly specialized and are there to handle one important labor-intensive job . This is not to say that a single can’t do many jobs, but more often than not, you’ll get better performance if you dedicate a to a single task.

means any network device with an IP address.

networks are what we use to span large geographic areas and truly go the distance. Like the Internet, s usually employ both routers and public links, so that’s generally the criteria used to define them

s can utilize either private or public data transport media such as phone lines.

s usually need a router port or ports, span larger geographic areas and/ or can link disparate locations, but are usually slower.

In an internetwork, hosts still use hardware to communicate with other hosts on the LAN. However, they use addresses (IP addresses) to communicate with hosts on a different (other side of the router)

Each connection into a is a different network.

(MPLS) stands for?

has become one of the most innovative and flexible networking technologies on the market, and it has some key advantages over other technologies

layout flexibility Prioritizing of data Redundancy in case of link failure One-to-many connection is a switching mechanism that imposes (numbers) to data and then uses those to forward data when it arrives at the MPLS network

The are assigned on the edge of the MPLS network, and forwarding inside the MPLS network (cloud) is done solely based on labels through links instead of physical links

Computers connected together in networks do not have any central, or special, authority— they’re all s, meaning that when it comes to authority, they’re all equals

Computers coexisting in a peer- to-peer network can be machines that access resources and machines and provide those resources to other computers. This actually works pretty well as long as there isn’t a huge number of users on the network, if each user backs things up locally, and if your network doesn’t require much . If your network is running Windows, Mac, or Unix in a local LAN workgroup, you have a network.

the topology of a network is also a type of map. It defines the specific characteristics of a network, such as where all the workstations and other devices are located and the precise arrangement of all the media such as cables.

a network’s physical topology gives you the lay of the land and the topology shows how a digital signal or data navigates through that layout.

the topology consists of two distinct and terminated ends, with each of its computers connecting to one cable running its entire length.

Some of the benefits of using a bus topology are that it’s to install and it’s not very expensive, partly because it doesn’t require as much

is the capability of a computer or a network system to respond to a condition automatically, often resolving it, which reduces the impact on the system.

A topology’s computers are connected to a central point with their own individual cables or wireless connections. You’ll often find that central spot inhabited by a device like a hub, a switch, or an access point.

Star topology offers a lot of advantages over bus topology, making it more widely used even though it obviously requires more media. One of its best features is that because each computer or network segment is connected to the device individually, if the cable fails, it only brings down the machine or network segment related to the point of .

Another great thing about a star topology is that it’s a lot more — all you have to do if you want to add to it is run a new and connect to the machine at the core of the star.

It's the center of a topology network that can give you the most grief if something goes wrong with it. If that hub happens to fail, down comes the whole network

Topology- In this type of topology , each computer is directly connected to other computers within the same network.
It has a lot in common with the topology because if you want to add to the network, you have no choice but to break the cable , which is likely to bring down the entire network! This is one big reason that ring is not ideal.

Topology In this type of topology, you’ll find that there’s a path from every machine to every other one in the network

mesh topology networks will have quite a few connections between certain places to create redundancy (backup).

it isn’t a full-on topology if there isn’t a connection between devices in the network.

In Mesh Topologies. For each n locations or hosts, you end up with n( n–1)/ 2 connections. This means that in a network consisting of only computers, you have 4( 4– 1)/ 2, or connections

A full mesh physical topology is least likely to have a , which happens when the data from two hosts trying to communicate simultaneously “s” and gets lost.

Point-to-Point Topology As its name implies, in a point-to-point topology you have a direct connection between routers or switches, giving you one communication path. The routers in a point-to-point topology can be linked by a cable, making it a network, or if they’re located far apart and connected only via a within a Frame Relay or MPLS network, it’s a network instead.

remember that a big drawback to peer-to-peer network sharing is that it’s not very . With this in mind, you probably won’t be all that surprised that even if both machines have a wireless point-to-point connection, this network still won’t be very .

What you see here is a lightning bolt and a couple of round things with a bunch of arrows projecting from them, right? Well, the two round things radiating arrows represent our network’s two routers, and that lightning bolt represents a link. These symbols are industry standard, and I’ll be using them throughout this book, so it’s a good idea to get used to them!

a topology consists of a succession of connections between an interface on one router and multiple destination routers— one point of connection to multiple points of connection. Each of the routers and every one of their interfaces involved in the connection are part of the same .

topology means just that— a combination of two or more types of physical or network topologies working together within the same .

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 18). Wiley. Kindle Edition.

Remember, a topology really shines when it comes to making additions to the network, moving things around, and making any kind of changes happen quickly, efficiently, and cost effectively.

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 20). Wiley. Kindle Edition.

Here’s a list of things to keep in mind when you’re faced with coming up with the right topology for the right network:
-
- Ease of
- Ease of maintenance
- requirement
- and security requirements.

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 20). Wiley. Kindle Edition.

Today’s networks can get pretty complicated, so we need to have a standard way of communicating with each other intelligibly about exactly which part of the network we’re referencing. This is the reason we divide networks into different parts called backbones and .

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 20). Wiley. Kindle Edition.

You can see that the network is actually kind of like our own. It’s what all the network segments and servers connect to and what gives the network its structure. As you can imagine, being such an important nerve center, the must use some kind of seriously fast, robust technology— often Gigabit Ethernet. And to optimize network — its speed and efficiency— it follows that you would want to connect all of the network’s servers and segments directly to the network’s .

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 20). Wiley. Kindle Edition.

When we refer to a , we can mean any small section of the network that may be connected to, but isn’t actually a piece of, the backbone. The network’s workstations and servers organized into connect to the network backbone, which is the common connecting point for all ;

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 21). Wiley. Kindle Edition.

A (CAN) refers to a network that encompasses several buildings. It comprises the part of the network where data, services and connectivity to the outside world is provided to those who work in the corporate office or headquarters.

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 21). Wiley. Kindle Edition.

Classic (SANs) are comprised of high-capacity storage devices that are connected by a high-speed network (separate from the LAN) using a storage-specific switch. This storage information architecture addresses the collection of , management of data, and use of data. These networks are typically fiber networks.

Lammle, Todd. CompTIA Network+ Study Guide (Comptia Network + Study Guide Authorized Courseware) (p. 21). Wiley. Kindle Edition.