Windows Server 2016 70-740 - Simulado VI

Frage 1 von 46

1

Question #01

You have a server named Server1 that runs Windows Server 2016. Server1 contains a volume named D. Volume D contains the folders shown in the following table.

You enable Data Deduplication.
Which folder will benefit the least from Data Deduplication?

Wähle eine der folgenden:

Folder2
Folder3
Folder1
Folder4

Erklärung

Frage 2 von 46

1

Question #02

You have a server named Server1. Server1 contains a volume that has Data Deduplication enabled.
You need to reduce the amount of memory allocated to the Data Deduplication process.
Which cmdlet should you run?

Wähle eine der folgenden:

Enabled-DedupVolume
Update-Dedupstatus
Set-DedupVolume
Set-DedupSchedule

Erklärung

Frage 3 von 46

1

Question #03

You have a Hyper-V cluster that uses Cluster Shared Volumes (CSV). The cluster contains 20 virtual machines. Each virtual machine has a single disk.
You create a storage QoS policy that sets the minimum IOPS to 100 and the maximum IOPS to 200.
You need to ensure that the storage traffic of each virtual machine complies with the storage QoS policy.
What should you run?

Wähle eine der folgenden:

Set-VMHardDiskDrive
Set-VM
Set-VMHost
Set-VHD

Erklärung

Frage 4 von 46

1

Question #04

HOTSPOT -
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 has the following configurations.

You need to enable nested virtualization for VM1.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

- The version
- Set VMProcessor
- The Generation
- Set-VM
- The NumaNodesCount
- Set-VMBios
-The ProcessorCount
- Set-VMFirmware
- The Version
- Set-VMSecurity

Erklärung

Frage 5 von 46

1

Question #05

HOTSPOT -
You have a server named Server1.
You need to create a Storage Spaces-based volume that meets the following requirements:
✑ Provides the highest resiliency
✑ Provides storage tiering
Which storage configuration parameters should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

6
Mirros Layout and fixed provisioning
10
Mirror layout and thin provisioning
12
Partity layout and thin provisioning
14
Mirros Layout and fixed provisioning

Erklärung

Frage 6 von 46

1

Question #06

You need to capture a Windows Server 2016 Datacenter image to a WIM file. The solution must exclude the C:\Windows.old folder.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Wähle eine oder mehr der folgenden:

Run Windows Configuration Designer and select the Advanced provisioning option
Create a text file that contains an [ExclusionException] section
Create a text file that contains an [ExclusionList] section
Run dism.exe and specify the /ConfigFile parameter
Run dism.exe and specify the /Scratchdir parameter
Create a text file that contains an [CompressionExclusionList] section

Erklärung

Frage 7 von 46

1

HOTSPOT -
Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2.
On Server1 and Server2, you use Windows Server Backup to create backups every day at 01:00 and 17:00. You configure Server1 to back up to a network share.
You configure Server2 to back up to a locally attached hard disk that is dedicated for backup.
The first backups are created on Monday at 01:00.
How many recovery points will be available for each server on Thursday at 14:00? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Server1: 1
Server2: 1
Server1: 1
Server2: 7
Server1: 6
Server2: 6
Server1: 7
Server2: 7
Server1: 7
Server2: 6
Server1: 8
Server2: 1

Erklärung

Frage 8 von 46

1

Question #08

HOTSPOT -
You have the Hyper-V hosts shown in the following table.

Server1 hosts the virtual machines shown in the following table.

Which virtual machine supports Secure Boot, and which virtual machine can be imported onto Server2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Supports Secure Boot: VM1
Can be imported onto Server2: VM1
Supports Secure Boot: VM1
Can be imported onto Server2: VM2
Supports Secure Boot: VM2
Can be imported onto Server2: VM2
Supports Secure Boot: VM3
Can be imported onto Server2: VM3

Erklärung

Frage 9 von 46

1

Question #09

HOTSPOT -
Your network contains an Active Directory domain named contoso.com. The domain contains the servers shown in the following table.

Server1 has a volume named D that contains the files shown in the following table.

Server1 fails.
You plan to move volume D to a different server.
Which files can you access if you move volume D to Server2 or Server3? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Server 2: - File1.txt only
Server 3: - File1.txt only
Server 2: - File1.txt and File2.docx only
Server 3: - File1.txt and File2.docx only
Server 2: - File1.txt, File2.docx, and File3.vhdx
Server 3: - File1.txt, File2.docx, and File3.vhdx
Server 2: - None of the Files
Server 3: - None of the Files
Server 2: - File1.txt only
Server 3: - File1.txt and File2.docx only
Server 2: - File1.txt, File2.docx, and File3.vhdx
Server 3: - None of the Files

Erklärung

Frage 10 von 46

1

Question #10

You have a five-node failover cluster named Cluster1. All the nodes run Windows Server 2012 R2. All the nodes run on physical hardware.
You need to upgrade Cluster1 to Windows Server 2016. The solution must minimize administrative effort and costs.
What should you do first?

Wähle eine der folgenden:

Add a Windows Server 2016 node to Cluster1
Create a new Windows Server 2016 failover cluster
Enable Cluster-Aware updating (CAU) on Cluster1
Drain and evict a node from Cluster1

Erklärung

Frage 11 von 46

1

Question #11

DRAG DROP -
You have a WIM file named Image.wim in a folder named C:\Images. The image contains a custom image of Windows Server 2016.
You need to update the image to include the PowerShell Desired State Configuration (DSC) feature.
Which three commands should you run in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Select and Place:

Wähle eine der folgenden:

1. Mount-WindowsImage -ImagePath C:\Images\image.wim -Index 1 -Path C:Mount
2. Enable-WindowsOptionalFeature -FeatureName DSC-Services -Path C:\Mount
3. Dismount-WindowsImage -Path C:\Mount -Save
1. Enable-WindowsOptionalFeature -FeatureName DSC-Services -Path C:\Mount
2. Mount-WindowsImage -ImagePath C:\Images\image.wim -Index 1 -Path C:Mount
3. Dismount-WindowsImage -Path C:\Mount -Save
1. Dismount-WindowsImage -Path C:\Mount -Save
2. Enable-WindowsOptionalFeature -FeatureName DSC-Services -Path C:\Mount
3. Mount-WindowsImage -ImagePath C:\Images\image.wim -Index 1 -Path C:Mount
1. Mount-WindowsImage -ImagePath C:\Images\image.wim -Index 1 -Path C:Mount
2. Enable-WindowsOptionalFeature -FeatureName DSC-Services -Path C:\Images
3. Dismount-WindowsImage -Path C:\Mount -Save

Erklärung

Frage 12 von 46

1

Question #12

You are building a failover cluster named Cluster1.
You plan to add the following cluster roles to Cluster1:
✑ DHCP Server named DHCP1
✑ iSCSI Target Server named ISCSI1
✑ Scale-Out File Server named SOFS1
Which roles require a Cluster Shared Volumes (CSV) disk?

Wähle eine der folgenden:

ISCSI1 only
SOFS1 and ISCSI1 only
DHCP1, SOFS1, and ISCSI1
SOFS1 only

Erklärung

Frage 13 von 46

1

Question #13

You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. VM1 runs Windows Server 2016 and is configured as shown in the following table.

You need to ensure that you can manually increase and decrease the amount of memory allocated to VM1 while VM1 is running.
What should you do?

Wähle eine der folgenden:

Disable Dynamic Memory
Enable Integration Services
Upgrade the configuration version

Erklärung

Frage 14 von 46

1

Question #14

HOTSPOT -
You have a stretch cluster that contains four nodes.
You run Get-ClusterFaultDomain and receive the output shown in the exhibit. (Click the Exhibit tab).

Node1 and Node2 are in a data center in an Active Directory site named London_Site. Node3 and Node4 are in an Active Directory site named Berlin_Site.
You need to ensure that the active nodes are in London_Site unless both Node1 and Node2 are offline.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

(Get-Cluster) PreferredSite="London"
(Get-Cluster).PreferredSite="Site1"
(Get-Cluster) PreferredSite="London_Site"
(Get-ClusterFaultDomain) PreferredSite="London"

Erklärung

Frage 15 von 46

1

Question #15

You have a server named Server1 that contains five volumes.
You install Data Deduplication on Server1.
You plan to enable Data Deduplication on volumes that can achieve a space saving of 50 percent or greater.
What should you run to identify on which volumes you should enable Data Deduplication?

Wähle eine der folgenden:

ddpeval.exe
Optimize-Volume
ddpcli.exe
diskpart.exe
Get-DedupVolume

Erklärung

Frage 16 von 46

1

Question #16

You have a file server named FS1 that contains 10 shared folders. The folders contain user data.
A new security requirement states that all data transmissions involving the user data must be encrypted.
You need to configure FS1 to meet the security requirement.
Which command should you run?

Wähle eine der folgenden:

Set-SmbServerConfiguration ""EncryptData $true
Set-SmbServerConfiguration ""EnableSMB1Protocol $false
Set-SmbClientConfiguration ""EnableInsecureGuestLogons $false
Set-SmbClientConfiguration ""EnableSecuritySignature $true

Erklärung

Frage 17 von 46

1

Question #17

You have three servers named Server1, Server2, and Server3. The servers are members of a Network Load Balancing (NLB) cluster named Cluster1.
You need to configure the handling priority for the traffic on port 443.
What should you do in Network Load Balancing Manager?

Wähle eine der folgenden:

From the cluster properties, configure the host priority
From the host properties, configure the Filtering mode of a port rule
From the host properties, configure the host priority
From the cluster properties, configure the Filtering mode of a port rule

Erklärung

Frage 18 von 46

1

Question #18

HOTSPOT -
You have a file server that runs Windows Server (Server with Desktop Experience) and contains the volumes shown in the following table.

You plan to enable Data Deduplication on the volumes.
You need to recommend changes to the volumes to ensure that all the volumes support Data Deduplication.
Which change should you recommend for each volume? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Erklärung

Frage 19 von 46

1

Question #19

HOTSPOT -
You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1 that has two network adapters.
You need to create a NIC team on VM1.
Which cmdlets should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Server1: New-VMSwitch
VM1: New-NetbfoTeam
Server1: Set-VMNetworkAdapter
VM1: New-NetLbfoTeam
Server1: New-NetLbfoTeam
VM1: Set-VMSwicthTeam
Server1: New-VMSwitch
VM1: Set-VMNetworkAdapter
Server1: Set-VMNetworkAdapter
VM1: New-VMSwitch
Server1: Set-VMSwicthTeam
VM1: New-NetbfoTeam

Erklärung

Frage 20 von 46

1

Question #20

HOTSPOT -
You have a server named Server1 that has Docker Engine "" Enterprise installed.
You create a container registry named Registry1 in a Microsoft Azure subscription.
You create a container image named image1 on Server1.
You need to store image1 in Registry1.
Which command should you run on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

docker push Registry1.Azurecr.io
docker pull Registry1.Azurecr.io
docker import Registry1.Azurecr.io
docker Export Registry1.Azurecr.io
docker push Registry1.Azurecr.blob.core.windows.net
docker push Registry1.Azurecr.onmicrosoft.com

Erklärung

Frage 21 von 46

1

Question #21

You have a Hyper-V host named HV1 that runs Windows Server 2016. HV1 is a guarded host that is part of a guarded fabric. HV1 receives updates through the
Semi-Annual Channel.
HV1 hosts the virtual machines shown in the following table.

HV1 has the virtual switches shown in the following table.

All the virtual machines are running and are joined to the same domain.
To which virtual machine can you connect by using PowerShell Direct?

Wähle eine der folgenden:

only VM1 and VM3
only VM2 and VM4
only VM3 and VM4
VM1, VM2, VM3, and VM4

Erklärung

Frage 22 von 46

1

Question #22

HOTSPOT -
You have several custom deployment images for Windows Server 2016. The images are stored in a WIM file named install.wim.
You need to apply a cumulative update located in C:\Packages to the first image in the WIM file.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine oder mehr der folgenden:

Mount-WindowsImage
add-WindowsPackage
Save-WidnowsImage
New-WindowsImage
get-WindowsPackage
Dismount-WindowsImage

Erklärung

Frage 23 von 46

1

Question #23

HOTSPOT -
You have three servers named Server1, Server2, and Server3. The servers are the members of a failover cluster named Cluster1.
You attach the following local disks to each server:

✑ Three 512-GB NVMes
✑ Three 1-TB HDDs
✑ Three 1-TB SSDs

You run Enable-ClusterStorageSpacesDirect.
What is the result of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine oder mehr der folgenden:

9 TB
Read + White
18 TB
Read-only
22.5 TB
White-only

Erklärung

Frage 24 von 46

1

Question #24

You have a server named Server1 that runs Windows Server 2016.
You install the Server for NFS server role on Server1.
You need to ensure that you can create NFS shares on Server1 by using the NFS Share "" Advanced share profile.
Which additional server role should you install?

Wähle eine der folgenden:

File Server VSS Agent Service
Work Folders
File Server Resource Manager
Print and Document Services

Erklärung

Frage 25 von 46

1

Question #25

HOTSPOT -
You have a Hyper-V failover cluster that consists of three nodes. Virtual machines are distributed evenly across the nodes.
You plan to restart each node during the upcoming week.
You need to ensure that after each restart, the virtual machines will be evenly distributed across the cluster. The solution must minimize the number of times the virtual machines are live-migrated across the nodes.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Wähle eine der folgenden:

Erklärung

Frage 26 von 46

1

Question #26

Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2.
On Server1, you create a PowerShell Desired State Configuration (DSC) script stored in a file named Config.ps1.
You need to compile Config.ps1 so that the script can be applied to Server2 by using PowerShell DSC.
What should you run?

Wähle eine der folgenden:

mofcomp.exe
Start-DscConfiguration
Publish-DscConfiguration
config.ps1

Erklärung

Frage 27 von 46

1

Question #27

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a server named Server1 that runs Windows Server 2016.
Server1 contains a virtual disk named Disk1.vhdx in a folder named D:\Folder1. Disk1.vhdx contains an installation of Windows Server 2016.
You need to add the Telnet Client feature to Disk1.vhdx while the installation is offline.
Solution: At a command prompt, you run dism.exe to mount an image, enable a feature, and then dismount the image.
Does this meet the goal?

Wähle eins der folgenden:

WAHR
FALSCH

Erklärung

Frage 28 von 46

1

Question #28

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a server named Server1 that runs Windows Server 2016.
Server1 contains a virtual disk named Disk1.vhdx in a folder named D:\Folder1. Disk1.vhdx contains an installation of Windows Server 2016.
You need to add the Telnet Client feature to Disk1.vhdx while the installation is offline.
Solution: From Server Manager, you run the Add Roles and Features wizard.
Does this meet the goal?

Wähle eins der folgenden:

WAHR
FALSCH

Erklärung

Frage 29 von 46

1

Question #29

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a server named Server1 that runs Windows Server 2016.
Server1 contains a virtual disk named Disk1.vhdx in a folder named D:\Folder1. Disk1.vhdx contains an installation of Windows Server 2016.
You need to add the Telnet Client feature to Disk1.vhdx while the installation is offline.
Solution: You run Windows Configuration Designer, select the Advanced provisioning option, and then export a provisioning package.
Does this meet the goal?

Wähle eins der folgenden:

WAHR
FALSCH

Erklärung

Frage 30 von 46

1

Question #30

You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

Wähle eine der folgenden:

Add-ClusterSharedVolume –Name "Disk 1" –Cluster Cluster1
New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString "Server1,Server2,Server3,Server4"

Erklärung

Frage 31 von 46

1

Question #31

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

Wähle eine der folgenden:

the dns.exe command
the optionalfeatures.exe command
the Install-Package cmdlet
the Enable-WindowsOptionalFeature cmdlet

Erklärung

Frage 32 von 46

1

Question #32

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

Wähle eine der folgenden:

Run the New-NetFirewallRule cmdlet
Run the Set-ServiceWindows PowerShell cmdlet
Edit the daemon.json file
Edit the configuration json file

Erklärung

Frage 33 von 46

1

Question #33

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

Wähle eine der folgenden:

RunNew-SRPartnershipand specify the -RephcationMode
install the Failover Clustering feature and create a new cluster resource group.
Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
RunSet-DfsrServiceConfigurationand specify the -RPCPort

Erklärung

Frage 34 von 46

1

Question #34

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

Wähle eine der folgenden:

Run the Set-Service cmdlet.
Modify the Security settings of Dockerd.exe.
Edit the Configuration.json file.
Run the sc config command.

Erklärung

Frage 35 von 46

1

Question #35

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

Wähle eine der folgenden:

Run the sc privsc ommand.
Edit the Daemon.json file.
Add Docker Administrators to the local Administrators group.
Edit the Configuration.json file.

Erklärung

Frage 36 von 46

1

Question #36

You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers, 10 files servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
✑ Backs up all servers
✑ Centralizes application-level backups
✑ Performs application-level backups
✑ Provides the ability to perform bare metal recovery
What should you use?

Wähle eine der folgenden:

Microsoft Azure VM Backup
Microsoft Azure Backup Agent
Windows Server Backup
Microsoft Azure Backup Server

Erklärung

Frage 37 von 46

1

Question #37

You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

Wähle eine der folgenden:

Set-NetUDPSetting
New-StorageQosPolicy
Set-SmbBandwidthLimit
Set-NetTCPSetting

Erklärung

Frage 38 von 46

1

uestion #38

You have a server named Server1 that runs Windows Server 2016.
Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1.
You need to extend Partition1.
What should you do first?

Wähle eine der folgenden:

From Windows PowerShell, run the Resize-VirtualDisk cmdlet.
From Windows PowerShell, run the Resize-StorageTier cmdlet.
From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.
From Disk Management, modify the properties of Partition1.
From Disk Management, extend a volume.

Erklärung

Frage 39 von 46

1

Question #39

You have Nano Setver image named Diskl .vhdx.
You mount Diskl .vhdx.
You need to add a folder that contains several files to the image.
Which tool or cmdlet you should use?

Wähle eine der folgenden:

Copy-Item
Add-WindowsImage
Add-WindowsPackage
Edit-NanoServerImage

Erklärung

Frage 40 von 46

1

Question #40

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

Wähle eine der folgenden:

thedns.execommand
theoptionalfeatures.execommand
theInstall-Packagecmdlet
theEnable-WindowsOptionalFeaturecmdlet

Erklärung

Frage 41 von 46

1

Question #41

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

Wähle eine der folgenden:

Run theNew-NetFirewallRule cmdlet
Run the Set-ServiceWindows PowerShell cmdlet
Edit the daemon.json file
Edit the configuration json file

Erklärung

Frage 42 von 46

1

Question #42

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

Wähle eine der folgenden:

Run New-SRPartnership and specify the RephcationMode
Install the Failover Clustering feature and create a new cluster resource group.
Install the Failover Clustering feature and use Cluster SharedVolumes (CSV).
Run Set-DfsrServiceConfiguration and specify the –RPCPort

Erklärung

Frage 43 von 46

1

Question #43

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

Wähle eine der folgenden:

Run the sc privs command.
Edit the Daemon.json file.
Add Docker Administrators to the local Administrators group.
Edit the Configuration.json file.

Erklärung

Frage 44 von 46

1

Question #44

You have a Hyper-V host that runs Windows Server 2016.
You need to identify the amount of processor resources consumed by Hyper-V and virtual machines.
Which counter should you use from Performance Monitor?

Wähle eine der folgenden:

\Hyper-V Hypervisor\Logical Processor
\Hyper-V HypervisorRoot Virtual Processor(_Total)\% Guest Run Time
\Hyper-V Hypervisor Virtual Processor(_Total)\% Hypervisor Run Time
\Hyper-V Hypervisor Virtual Processor(_Total)\% Total Run Time

Erklärung

Frage 45 von 46

1

Question #45

You have a file server named Server1 that runs Windows Server 2016.
Object access auditing is configured on Server1.
You need to filter the Security event log to show all log entries that relate to a user named User1.
What should you do?

Wähle eine der folgenden:

Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, type a value in the User box.
Right-click the Security log, and then click Filter Current Log"¦ On the Filter tab, select a value from the Event sources box.
Right-click the Security log, and then click Create Custom View"¦ On the Filter tab, type a value in the User box.
Right-click the Security log, and then click Filter Current Log"¦ On the XML tab, modify the QueryList entry and set an EventData tag.

Erklärung

Frage 46 von 46

1

Question #46

You have a server that runs Windows Server 2016 Standard.
You create a new three-way mirror storage space. You format the storage space by using ReFS.
Which two features can you use on the new storage space? Each correct answer presents a complete solution.

Wähle eine oder mehr der folgenden:

Shrink volume
long file names
Encrypting File System (EFS)
disk quotas
file and folder permissions

	Erstellt von gabriel ribeiro vor mehr als 4 Jahre

simulado do exame em ingles para realização da certificação do windows server 2016 mcsa e mcse.

Windows Server 2016 70-740 - Simulado VI

Windows Server 2016 70-740 - Simulado VI

Frage 1 von 46

Question #01 You have a server named Server1 that runs Windows Server 2016. Server1 contains a volume named D. Volume D contains the folders shown in the following table. You enable Data Deduplication. Which folder will benefit the least from Data Deduplication?

Wähle eine der folgenden:

Erklärung

Frage 2 von 46

Question #02 You have a server named Server1. Server1 contains a volume that has Data Deduplication enabled. You need to reduce the amount of memory allocated to the Data Deduplication process. Which cmdlet should you run?

Wähle eine der folgenden:

Erklärung

Frage 3 von 46

Wähle eine der folgenden:

Erklärung

Frage 4 von 46

Wähle eine der folgenden:

Erklärung

Frage 5 von 46

Wähle eine der folgenden:

Erklärung

Frage 6 von 46

Question #06 You need to capture a Windows Server 2016 Datacenter image to a WIM file. The solution must exclude the C:\Windows.old folder. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Wähle eine oder mehr der folgenden:

Erklärung

Frage 7 von 46

Wähle eine der folgenden:

Erklärung

Frage 8 von 46

Wähle eine der folgenden:

Erklärung

Frage 9 von 46

Wähle eine der folgenden:

Erklärung

Frage 10 von 46

Question #10 You have a five-node failover cluster named Cluster1. All the nodes run Windows Server 2012 R2. All the nodes run on physical hardware. You need to upgrade Cluster1 to Windows Server 2016. The solution must minimize administrative effort and costs. What should you do first?

Wähle eine der folgenden:

Erklärung

Frage 11 von 46

Wähle eine der folgenden:

Erklärung

Frage 12 von 46

Question #12 You are building a failover cluster named Cluster1. You plan to add the following cluster roles to Cluster1: ✑ DHCP Server named DHCP1 ✑ iSCSI Target Server named ISCSI1 ✑ Scale-Out File Server named SOFS1 Which roles require a Cluster Shared Volumes (CSV) disk?

Wähle eine der folgenden:

Erklärung

Frage 13 von 46

Wähle eine der folgenden:

Erklärung

Frage 14 von 46

Wähle eine der folgenden:

Erklärung

Frage 15 von 46

Wähle eine der folgenden:

Erklärung

Frage 16 von 46

Wähle eine der folgenden:

Erklärung

Frage 17 von 46

Question #17 You have three servers named Server1, Server2, and Server3. The servers are members of a Network Load Balancing (NLB) cluster named Cluster1. You need to configure the handling priority for the traffic on port 443. What should you do in Network Load Balancing Manager?

Wähle eine der folgenden:

Erklärung

Frage 18 von 46

Wähle eine der folgenden:

Erklärung

Frage 19 von 46

Wähle eine der folgenden:

Erklärung

Frage 20 von 46

Wähle eine der folgenden:

Erklärung

Frage 21 von 46

Wähle eine der folgenden:

Erklärung

Frage 22 von 46

Wähle eine oder mehr der folgenden:

Erklärung

Frage 23 von 46

Wähle eine oder mehr der folgenden:

Erklärung

Frage 24 von 46

Question #24 You have a server named Server1 that runs Windows Server 2016. You install the Server for NFS server role on Server1. You need to ensure that you can create NFS shares on Server1 by using the NFS Share "" Advanced share profile. Which additional server role should you install?

Question #01

You have a server named Server1 that runs Windows Server 2016. Server1 contains a volume named D. Volume D contains the folders shown in the following table.

You enable Data Deduplication.
Which folder will benefit the least from Data Deduplication?

Question #02

You have a server named Server1. Server1 contains a volume that has Data Deduplication enabled.
You need to reduce the amount of memory allocated to the Data Deduplication process.
Which cmdlet should you run?

Question #06

You need to capture a Windows Server 2016 Datacenter image to a WIM file. The solution must exclude the C:\Windows.old folder.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Question #10

You have a five-node failover cluster named Cluster1. All the nodes run Windows Server 2012 R2. All the nodes run on physical hardware.
You need to upgrade Cluster1 to Windows Server 2016. The solution must minimize administrative effort and costs.
What should you do first?

Question #12

You are building a failover cluster named Cluster1.
You plan to add the following cluster roles to Cluster1:
✑ DHCP Server named DHCP1
✑ iSCSI Target Server named ISCSI1
✑ Scale-Out File Server named SOFS1
Which roles require a Cluster Shared Volumes (CSV) disk?

Question #17

You have three servers named Server1, Server2, and Server3. The servers are members of a Network Load Balancing (NLB) cluster named Cluster1.
You need to configure the handling priority for the traffic on port 443.
What should you do in Network Load Balancing Manager?

Question #24

You have a server named Server1 that runs Windows Server 2016.
You install the Server for NFS server role on Server1.
You need to ensure that you can create NFS shares on Server1 by using the NFS Share "" Advanced share profile.
Which additional server role should you install?

Question #31

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

Question #32

You have a server named Server1 that runs Windows Server 2016. You install the Docker daemon on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

Question #33

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2. What should you do?

Question #34

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?

Question #35

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1.
You need to ensure that members of a security group named Docker Administrators can administer Docker.
What should you do?