Carlos Alberto Jara Alva
Quiz von , erstellt am more than 1 year ago

Quiz am Examen 102 - Chapter 6: Configuring the X Window System, Localization, and Printing, erstellt von Carlos Alberto Jara Alva am 12/07/2022.

65
0
0
Keine Merkmale angegeben
Carlos Alberto Jara Alva
Erstellt von Carlos Alberto Jara Alva vor mehr als 2 Jahre
Schließen

Examen 102 - Chapter 6: Configuring the X Window System, Localization, and Printing

Frage 1 von 20

1

When you configure an X server, you need to make changes to configuration files and then
start or restart the X server. Which of the following can help streamline this process?

Wähle eine der folgenden:

  • Shut down X by switching to a runlevel in which X doesn’t run automatically, and then reconfigure it and use startx to test X startup.

  • Shut down X by booting into single-user mode, and then reconfigure X and use
    telinit to start X running again.

  • Reconfigure X, and then unplug the computer to avoid the lengthy shutdown process before restarting the system and X along with it.

  • Use the startx utility to check the X configuration file for errors before restarting the
    X server.

  • Connect the Linux computer’s network port directly to the X server, without using any intervening routers, in order to reduce network latency.

Erklärung

Frage 2 von 20

1

Which of the following summarizes the organization of the X configuration file?

Wähle eine der folgenden:

  • The file contains multiple sections, one for each screen. Each section includes subsections for individual components (keyboard, video card, and so on).

  • Configuration options are entered in any order desired. Options relating to specific
    components (keyboard, video card, and so on) may be interspersed.

  • The file begins with a summary of individual screens. Configuration options are pre-
    ceded by a code word indicating the screen to which they apply.

  • The file is broken into sections, one or more for each component (keyboard, video
    card, and so on). The file also has one or more sections that define how to combine the main sections.

  • The file is a rare binary configuration file that must be accessed using SQL
    database tools.

Erklärung

Frage 3 von 20

1

A monitor’s manual lists its range of acceptable synchronization values as 27kHz–96kHz
horizontal and 50Hz–160Hz vertical. What implications does this have for the resolutions
and refresh rates the monitor can handle?

Wähle eine der folgenden:

  • The monitor can run at up to 160Hz vertical refresh rate in all resolutions.

  • The monitor can handle up to 160Hz vertical refresh rate depending on the
    color depth.

  • The monitor can handle up to 160Hz vertical refresh rate depending on the resolution.

  • The monitor can handle vertical resolutions of up to 600 lines (96,000 ÷ 160), but
    no more.

  • The monitor can handle horizontal resolutions of up to 600 columns (96,000 ÷ 160),
    but no more.

Erklärung

Frage 4 von 20

1

In what section of XF86Config or xorg.conf do you specify the resolution that you want
to run?

Wähle eine der folgenden:

  • In the ServerLayout section, using the Screen option

  • In the Monitor section, using the Modeline option

  • In the Device section, using the Modeline option

  • In the DefaultResolution section, using the Define option

  • In the Screen section, subsection Display, using the Modes option

Erklärung

Frage 5 von 20

1

What is an advantage of a font server?

Wähle eine der folgenden:

  • It provides faster font displays than are otherwise possible.

  • It can simplify font maintenance on a network with many X servers.

  • It’s the only means of providing TrueType support for XFree86 4.x.

  • It enables the computer to turn a bitmapped display into an ASCII text file.

  • It enables X to use font smoothing, which isn’t possible with core fonts.

Erklärung

Frage 6 von 20

1

What methods do Linux distributions use to start X automatically when the system boots?
(Select two.)

Wähle eine oder mehr der folgenden:

  • Start an XDMCP server from the Start folder.

  • Start an XDMCP server from an ~/.xinitrc script.

  • Start an XDMCP server via a system startup script.

  • Start an XDMCP server via a boot manager.

  • Start an XDMCP server from init.

Erklärung

Frage 7 von 20

1

How would you change the text displayed by XDM as a greeting?

Wähle eine der folgenden:

  • Click Configure ➣ Greeting from the XDM main menu, and edit the text in the result-
    ing dialog box.

  • Pass greeting="text" as a kernel option in the boot loader, changing text to the new
    greeting.

  • Edit the /etc/X11/xorg.conf file, and change the Greeting option in the xdm area.

  • Run xdmconfig, and change the greeting on the Login tab.

  • Edit the /etc/X11/xdm/Xresources file, and change the text in the xlogin*greeting line.

Erklärung

Frage 8 von 20

1

Which of the following features do KDM and GDM provide that XDM doesn’t?

Wähle eine der folgenden:

  • An encrypted remote X-based access ability, improving network security

  • The ability to accept logins from remote computers, once properly configured

  • The ability to select the login environment from a menu on the main login screen

  • A login screen that shows the username and password simultaneously rather than
    sequentially

  • An option to log into text mode if X should fail to start

Erklärung

Frage 9 von 20

1

Which of the following commands tells the X server to accept connections from penguin.
example.com?

Wähle eine der folgenden:

  • xhost +penguin.example.com

  • export DISPLAY=penguin.example.com:0

  • telnet penguin.example.com

  • xaccess penguin.example.com

  • ssh penguin.example.com

Erklärung

Frage 10 von 20

1

To assist an employee who has trouble with keyboard repeat features, you’ve disabled this
function in /etc/X11/xorg.conf. Why might this step not be sufficient for the goal of
disabling keyboard repeat?

Wähle eine der folgenden:

  • GNOME, KDE, or other desktop environment settings for keyboard repeat may
    override those set in xorg.conf.

  • The xorg.conf file has been deprecated; you should instead adjust the /etc/X11/
    XF86Config file.

  • Keyboard settings in xorg.conf apply only to Bluetooth keyboards; you must use
    usbkbrate to adjust keyboard repeat for USB keyboards.

  • You must also locate and reset the DIP switch on the keyboard to disable keyboard
    repeat.

  • The keyboard repeat options in xorg.conf work only if the keyboard’s nationality is
    set incorrectly, which is not often.

Erklärung

Frage 11 von 20

1

Which of the following programs may be used to provide computer-generated speech for
users who have trouble reading computer displays? (Select two.)

Wähle eine oder mehr der folgenden:

  • SoX

  • Braille

  • Orca

  • talk

  • Emacspeak

Erklärung

Frage 12 von 20

1

You manage a computer that’s located in Los Angeles, California, but the time zone is
misconfigured as being in Tokyo, Japan. What procedure can you follow to fix this
problem? (Select two.)

Wähle eine oder mehr der folgenden:

  • Run hwclock --systohc to update the clock to the correct time zone.

  • Delete /etc/localtime, and replace it with an appropriate file from /usr/share/
    zoneinfo.

  • Edit the /etc/tzconfig file so that it specifies North_America/Los_Angeles as the
    time zone.

  • Edit /etc/localtime, and change the three-letter time zone code on the TZ line.

  • Use the tzselect program to select a new (Los Angeles) time zone.

Erklärung

Frage 13 von 20

1

You’re configuring a Linux system that doesn’t boot any other OS. What is the recom-
mended time to which the computer’s hardware clock should be set?

Wähle eine der folgenden:

  • Helsinki time

  • Local time

  • US Pacific time

  • UTC

  • Internet time

Erklärung

Frage 14 von 20

1

You’ve developed a script that uses several Linux commands and edits their output.
You want to be sure that the script runs correctly on a computer in Great Britain, although
you’re located elsewhere, since the output includes features such as currency symbols and
decimal numbers that are different from one nation to another. What might you do to
test this?

Wähle eine der folgenden:

  • Enter the BIOS, locate and change the location code, reboot into Linux, and run
    the script.

  • Edit /etc/locale.conf, change all the LC_* variables to en_GB.UTF-8, and then
    reboot and run the script.

  • Type export LC_ALL=en_GB.UTF-8, and run the script from the same shell you
    used to type this command.

  • Type locale_set Great_Britain, and run the script from the same shell you used
    to type this command.

  • Type export TZ=:/usr/share/zoneinfo/Europe/London, and run the script
    from the same shell you used to type this command.

Erklärung

Frage 15 von 20

1

Which character set encoding is the preferred method on modern Linux systems?

Wähle eine der folgenden:

  • UTF-8

  • ASCII

  • ISO-8859-1

  • ISO-8859-8

  • ATASCII

Erklärung

Frage 16 von 20

1

Which of the following describes the function of a smart filter?

Wähle eine der folgenden:

  • It improves the legibility of a print job by adding font smoothing to the text.

  • It detects information in print jobs that may be confidential as a measure against
    industrial espionage.

  • It sends email to the person who submitted the print job, obviating the need to wait
    around the printer for a printout.

  • It detects and deletes prank print jobs that are likely to have been created by trouble-makers trying to waste your paper and ink.

  • It detects the type of a file and passes it through programs to make it printable on a
    given model of printer.

Erklärung

Frage 17 von 20

1

What information about print jobs does the lpq command display? (Select two.)

Wähle eine oder mehr der folgenden:

  • The name of the application that submitted the job

  • A numerical job ID that can be used to manipulate the job

  • The amount of ink or toner left in the printer

  • The username of the person who submitted the job

  • The estimated time to finish printing the job

Erklärung

Frage 18 von 20

1

You’ve submitted several print jobs, but you’ve just realized that you mistakenly submitted
a huge document that you didn’t want to print. Assuming that you can identify the specific
job, that it’s not yet printing, and that its job ID number is 749, what command would you
type to delete it from the okidata print queue?

Wähle eine der folgenden:

  • The answer depends on whether you’re using BSD, LPD, LPRng, or CUPS.

  • Type lpdel -Pokidata 749.

  • Type lprm -Pokidata 749.

  • Type cupsdisable -Pokidata 749.

  • None of the above; the task is impossible.

Erklärung

Frage 19 von 20

1

Which of the following is generally true of Linux programs that print?

Wähle eine der folgenden:

  • They send data directly to the printer port.

  • They produce PostScript output for printing.

  • They include extensive collections of printer drivers.

  • They can print only with the help of add-on commercial programs.

  • They specify use of the Verdana font.

Erklärung

Frage 20 von 20

1

What tool might you use to print a four-page PostScript file on a single sheet of paper?

Wähle eine der folgenden:

  • PAM

  • mpage

  • 4Front

  • route

  • 411t o ppm

Erklärung

Vorherige
Nächste