_____________ is demonstrated by the connectors ability to withstand hundreds of insertion and withdrawal cycles without failing. This is expressed as mean time between failure.

One of the purposes of a standard is to ensure a minimal level of acceptable ______________.

While codes and safety standards address the safety of persons and property in the installation or use of a system, codes ________ ensure system functionality.

The predominant coaxial cables used for video are

_______________ is the movement of information by electromagnetic energy in the form of electrical or optical signals from one point to another through a transport medium.

Twisted pair cable is called ___________where coaxial cable is called _____________.

The transmission of analog data can be converted from analog format to digital with a ____________.

________________ represents the information carrying capacity of a system.

______________ is a property of conductor that allows storage of electric charges when potential differences
(voltages) exist between the conductors.

In ac circuits, the total opposition to current flow is called ___________, which is measured in ohms.

_______________ is defined in the number of cycles a signal is repeated in a given time period.

The measure of a signal loss resulting from the insertion of a component, link, or channel between a transmitter and receiver is

_______________ is a property of an electromagnetic field built around a conductor that opposes any changes in current flow in a circuit, both ac and varying dc.

The transmission of digital data can be accomplished on a direct digital basis over a digital circuit, or it can be converted to a analog signal with a ________________ .

This is the property of a conductor to resist the flow of electricity through it.

The unwanted transfer of a signals electromagnetic energy from one or more circuits to other circuits is called______________.

______________ quantifies the bandwidth of a cabling system in a frequency range.

( size of the highway )

_____________ refers to the amount of information that can be transported over the media.

( vehicles on the highway )

The POTS signal range is transmitted between______________, which is regarded as the minimum range for human speech to be audible and recognizable.

System gain and attenuation are typically stated as ______ gain or _______ loss.

________________ is the ratio of the power of the outgoing signal to the power of the reflected signal and is expressed in decibels.

What is the frequency of TIA category 6, ISO category 6/Class E.

Bix termination blocks assemblies come in increments of ____________

Series 6 and Series 11 have a coated foil shield over the dielectric to shield against_________frequencies, while the braided shield over the coated foil is to shield against ____________frequencies.

In optical fiber, the purpose of the ________ is to confine the light within the _________ by creating a reflective boundary.

_____________ is the most common for backbone and horizontal runs within building and campus environments.

Who normally enforces the codes and legal regulations for the jurisdiction?

_____________ is the widening or spreading out of the modes in a light pulse as it progresses along the optical fiber.

This type of optical fiber is : primarily used outdoors, has shorter jacket length to the fiber length, allows jacket to expand and contract with temperature changes, may contain water blocking material...

Humans can hear frequencies that range from _______to_________.