1730807
Frage 1
Frage
2. Which three statements are true about the role of routers in the network? (Choose three.)
Antworten
-
They propagate broadcasts.
-
They enlarge collision domains.
-
They segment broadcast domains.
-
They interconnect different network technologies.
-
Each router interface requires a separate network or subnet.
-
They maintain a common frame format between LAN and WAN interfaces.
Frage 2
Frage
Refer to the exhibit. Which three statements are true about the exhibited topology? (Choose three.)
Image:
24 (image/jpg)
Antworten
-
Hosts B and C are in the same subnet.
-
Five broadcast domains are present.
-
Host B is using a crossover cable to connect to the router.
-
Four broadcast domains are present.
-
Five networks are shown.
-
Host B is using a rollover cable to connect to the router.
Frage 3
Frage
6. Which three types of connectors are commonly associated with Cisco’s V.35 serial cables? (Choose three.)
Antworten
-
RJ 11
-
DB 60
-
Winchester 15 pin
-
DB 9
-
smart serial
-
RJ 45
Frage 4
Frage
7. How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0?
Antworten
-
30
-
256
-
2046
-
2048
-
4094
-
4096
Frage 5
Frage
Refer to the exhibit. Which three statements identify the type of cabling that would be used in the segments that are shown? (Choose three.)
Image:
25 (image/jpg)
Antworten
-
Segment 1 uses backbone cabling.
-
Segment 1 uses a patch cable.
-
Segment 3 uses patch cabling.
-
Segment 3 uses vertical cabling.
-
Segment 3 uses horizontal cabling.
-
Segment 4 uses vertical cabling.
Frage 6
Frage
Refer to the exhibit. How many subnets are required to support the network that is shown?
Image:
26 (image/jpg)
Antworten
-
2
-
3
-
4
-
5
Frage 7
Frage
14. What does the term “attenuation” mean in data communication?
Antworten
-
loss of signal strength as distance increases
-
time for a signal to reach its destination
-
leakage of signals from one cable pair to another
-
strengthening of a signal by a networking device
Frage 8
Frage
Refer to the exhibit. A network technician has been allocated the 192.168.1.0/24 private IP address range for use in the network that shown in the exhibit. Which subnet mask would be used to meet the host requirements for segment A of this internetwork?
Image:
27 (image/jpg)
Antworten
-
255.255.255.128
-
255.255.255.192
-
255.255.255.224
-
255.255.255.240
-
255.255.255.248
Frage 9
Frage
21. What are two common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose two.)
Antworten
-
cable color code association
-
cable selection and configuration
-
use of cable testers to determine pinouts
-
the automatic detection and negotiating of MDI/MDIX operation of the port
-
the enabling of the mechanism to electrically swap the transmit and receive pairs
Frage 10
Frage
24. What are three common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose three.)
Antworten
-
direct configuration of the device
-
cable color code association
-
cable selection and configuration
-
use of cable testers to determine pinouts
-
the enabling of the mechanism to electrically swap the transmit and receive pairs
-
the automatic detection and negotiating of MDI/MDIX operation of the port
Frage 11
Frage
Refer to the exhibit. A technician applies the configuration in the exhibit to a clean router. To verify the configuration, the technician issues the show running-config command in the CLI session with the router. What lines should the technician expect to see in the router output from the show running-config command?
Antworten
-
enable password class line console 0 password ccna
-
enable secret cisco enable password class line console 0 password ccna
-
enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0 enable password class line console 0 password ccna
-
enable secret cisco enable password 7 14141E0A1F17 line console 0 password 7 020507550A
-
enable secret 5 $1$v0/3$QyQWmJyT7zCa/yaBRasJm0 enable password 7 14141E0A1F17 line console 0 password 7 020507550A
Frage 12
Frage
Refer to the exhibit. A network administrator on HostA has problems accessing the FTP server. Layer three connectivity testing was successful from HostA to the S1 interface of RouterB. Which set of commands will allow the network administrator to telnet to RouterB and run debug commands?
Image:
29 (image/jpg)
Antworten
-
RouterB(config)# enable secret class RouterB(config)# line vty 0 4 RouterB(config-if)# login
-
RouterB(config)# enable secret class RouterB(config)# line vty 0 2 RouterB(config-vty)# password cisco RouterB(config-vty)# login
-
RouterB(config)# enable secret class RouterB(config)# line vty 0 RouterB(config-line)# password cisco RouterB(config-line)# login
-
RouterB(config)# enable secret class RouterB(config)# line aux 0 RouterB(config-line)# password cisco RouterB(config-line)# login
-
RouterB(config)# enable secret class RouterB(config)# line aux 0 RouterB(config-vty)# password cisco RouterB(config-vty)# login
Frage 13
Frage
Refer to the exhibit. Which names correctly identify the CLI mode represented by the prompt for Switch-East4#? (Choose two.)
Image:
30 (image/jpg)
Antworten
-
line configuration mode
-
user executive mode
-
global configuration mode
-
privileged executive mode
-
interface configuration mode
-
enable mode
Frage 14
Frage
Refer to the exhibit. The output is shown for the show ip route command executed on Router A. What does the IP address 192.168.2.2 represent?
Image:
31 (image/jpg)
Antworten
-
Gateway for the 192.168.1.0 network
-
Gateway for the 192.168.3.0 network
-
IP assigned to the serial port on Router A
-
IP assigned to the serial port on Router B
Frage 15
Frage
13. Which three terms correctly define the forms of help available within the Cisco IOS? (Choose three.)
Antworten
-
hot keys
-
context-check
-
context-sensitive
-
structured check
-
command override
-
command syntax check
Frage 16
Frage
Refer to the exhibit. A student is responsible for the IP addressing, configuration and connectivity testing of the network shown in the graphic. A ping from host B to host C results in a destination unreachable but a ping from host B to host A was successful. What two reasons could account for this failure based on the graphic and partial router output for the Dallas router? (Choose two.)
Image:
32 (image/jpg)
Antworten
-
The host A is turned off.
-
The Fa0/0 interface on Dallas is shutdown.
-
The LAN cable is disconnected from host B.
-
The S0/0/1 IP address of Dallas is improperly configured.
-
The Fa0/0 interface on Dallas is in a different subnet than host B.
-
The clock rate is missing on the serial link between Dallas and NYC.
Frage 17
Frage
The connection between routers B and C has been successfully tested. However, after rebooting router C, the administrator noticed the response time between networks 10.10.3.0 and 10.10.4.0 is slower. Ping between the two routers is successful. A trace route indicates three hops from router B to router C. What else can be done to troubleshoot the problem?
Image:
33 (image/jpg)
Antworten
-
Ping router B S0/1 connection from router C.
-
Trace the connection between router B to router C S0/1.
-
Issue a show ip route command in router B to verify routing is enabled.
-
Issue a show interfaces command on router C.
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.