Zusammenfassung der Ressource
Frage 1
Frage
List below three common hand tools and their uses for working with waste pipe and rainwater guttering.
Antworten
-
Multipurpose saw - cutting waste pipe and guttering
-
Plumb Line – setting out a vertical line
-
Chop saw - for cutting pipe
-
Screwdriver – for screws in brackets
-
Wire wool - for deburring edges
Frage 2
Frage
State two safety requirements when using hand tools whilst fitting gutter and waste pipe
Antworten
-
Tools must be used per manufacturer’s instructions
-
Tools must be well maintained and in good condition
-
Some PPE must be worn
-
You must start work at 7am
Frage 3
Frage
State three basic maintenance requirements of common plumbing hand tools.
Antworten
-
Ensure tools are clean and safe to use
-
Ensure all cutting edges/blades are sharp
-
Ensure all moving parts are well oiled and move easily
-
Ensure you buy new tools
Frage 4
Frage
Which of the following is the maximum recommended spacing for fascia?
Antworten
-
a) 0.5m
-
b) 0.75m
-
c) 1.0m
-
d) 1.5m
Frage 5
Frage
When two pieces of guttering are joined together a gap is left between them. State the reason for this gap.
The gap is left to allow the gutter to expand when heated by the outside air temperature.
Frage 6
Frage
The gradient should fall 1:600 when installing rainwater guttering
Frage 7
Frage
The clip in the picture is generally used on which size waste pipe
Antworten
-
a) 40mm
-
b) 110mm
-
c) 28mm
-
d) 25mm
Frage 8
Frage
State the size of waste pipe used on a bath
Frage 9
Frage
The clips below are generally used on which of the following size waste pipes
Antworten
-
a) 32mm
-
b) 23mm
-
c) 46mm
-
d) 119mm
Frage 10
Frage
40mm diameter vertical waste pipe should have a maximum clipping distance of
Antworten
-
a) 1m
-
b) 1.2m
-
c) 1.5m
-
d) 1.8m