Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Question

When troubleshooting a system fault, if the Web Interface or SAT are unavailable, which method should be used?

Answer 1

S8730 Server with 8 GB RAM

Answer 2

S8800 Server with 12 GB RAM

Answer 3

S8510 Server with 8 GB RAM

Answer 4

S8300D Server with 8 GB RAM

Answer 5

Shoe tracelog huntgroup 4199

Answer 6

View logs real time huntgroup 99

Answer 7

Display real time logs hunt group 99

Answer 8

List trace hunt-group 4199

Answer 9

Signaling group number

Answer 10

SIP Domain

Answer 11

Transport Method

Answer 12

Extension length

Answer 13

Hunt Group number

Answer 14

Verify the hunt group status

Answer 15

Check the messaging port status using the display port command

Answer 16

Call the messaging Hunt Group

Answer 17

Check the messaging port status using the status port command

Answer 18

Perform Message Waiting Indication test

Answer 19

Communication manager Web interface

Answer 20

Console Domain > Server Management > Path management

Answer 21

Console Domain > Server Management > Platform Upgrade

Answer 22

Console Domain > Virtual Machine Management

Answer 23

Software duplication is available, but hardware duplication is not available.

Answer 24

The S8510 server is not used for duplication

Answer 25

Server duplication is configured via "Failover" option on CDROMs web interface

Answer 26

S8730 with DAL 2 card does not support server duplication in CM 6.0.

Answer 27

The CM duplex template supports CMM

Answer 28

Nvram init

Answer 29

Status station <extension>

Answer 30

Status shuffling <extension>

Answer 31

List station <extension>

Answer 32

Test station <extension>

Answer 33

Utility Services

Answer 34

Session Manager

Answer 35

The S8700-Series Servers must be replaced by S8800 servers.

Answer 36

All G350 gateways must replaced by S8800 servers.

Answer 37

The Survivable Remote servers must be Upgraded to Release 6.0

Answer 38

The survivable Remote servers can stay at Release 5.2

Answer 39

Select messaging administration, then subscribe management, and then click add or edit.

Answer 40

Select messaging administration, the click new.

Answer 41

Select messaging administration, Select messaging administration, and then click add.

Answer 42

Select Forms control, and then at the command line run then add subscribe command.

Answer 43

FTP Server

Answer 44

100 MB port speed

Answer 45

Auto-negotiation enabled

Answer 46

Full Duplex

Answer 47

Status trunk 53/5

Answer 48

List trace port 53/5

Answer 49

Display trunk 53/5

Answer 50

Display trunk statistics 53/5

Answer 51

Status port 53/5

Answer 52

Authentication file

Answer 53

Firmware updates

Answer 54

Communication manager templates

Answer 55

Customers can turn features ON or OFF using the change system parameters customer- options command on the system access terminal (SAT).

Answer 56

Customers can turn features ON or OFF using the system management interface features administration page.

Answer 57

Customers can PDLS directly to turn futures ON or OFF and then download and install a new license file with the updated features.

Answer 58

Customers can turn features ON or OFF using the WebLM server and the system platform management Console

Answer 59

From a browser, using the communication manager IP address, successfully log into the communication manager system management.

Answer 60

From a browser logged into communication Manager, Select administration > server (Maintenance)> server>Process Status. Click on view.

Answer 61

From a browser logged into the system Management Console verify cm, bsm, and utility_server and application status is running

Answer 62

When monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays.

Answer 63

It supports G450/G430 gateways.

Answer 64

It supports Analog trunks.

Answer 65

It supports SIP telephones.

Answer 66

It supports SIP trunks.

Answer 67

It supports Digital trunks.

Answer 68

Print station 1000

Answer 69

Display station 1000

Answer 70

Show station 1000

Answer 71

View station 1000

Answer 72

Software duplication exists between the two main S8800 servers.

Answer 73

The two main servers have duplication IPSls

Answer 74

Hardware Duplication exists between the two main S8800 servers.

Answer 75

The main servers share a single control network

Answer 76

All Clam media and Medpro cards must be in a one subnet

Answer 77

The enable operation of IPSI Duplication field on the display system-parameter duplication form is set to y.

Answer 78

IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing

Answer 79

Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result column.

Answer 80

A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI.

Answer 81

10Mbps half duplex

Answer 82

1000Mbps full duplex

Answer 83

100Mbps full duplex

Answer 84

100Mbps half duplex

Answer 85

All active (stable) Ip calls on the media gateway drop when the media gateway falls back from the survivable remote server to the main server.

Answer 86

The list survivable-processor command can be used to confirm that the remote Survivable server is registered to the main server and that the remote survivable server is no longer active.

Answer 87

When the main server recovers it issues registration requests to all the media gateways in the network.

Answer 88

Executing the status media-gateways command from the main server will show which media gateways are registered with the main server.

Answer 89

Status ess clusters

Answer 90

Display survivable-processors

Answer 91

Status ess port-networks

Answer 92

Status survivable-processors

Answer 93

From the SAT, type change system-parameter customer-options. Find the media encryption over IP field, and set the option to Y. Save the change

Answer 94

From the SMI Feature administration page, find the media Encryption over IP field Set the option to Y. save the changes

Answer 95

From the system platform WebLM page. Find the media Encryption over IP field set the option to Y. Save the changes.

Answer 96

From the Aura System Manager's Feature Server Administration page. Find the media encryption over IP field, and set the option to Y. save the changes.

Answer 97

From the laptop connected to the network, ping the dom0 IP address and verify a successful response.

Answer 98

Immediately after the installation, verify the DVD is ejected from the drive and that the server reboots.

Answer 99

After connecting the server using PuTTY and logging in as root, verify there are no errors when running the xm list command.

Answer 100

From the system management console browser, verify domain-0 and cdom are running

Answer 101

The survivable remote Duplex template includes branch session manager

Answer 102

CM uses the high availability that system platform can now provide

Answer 103

The license for the survivable server is different than the license file of the main server

Answer 104

The main and all survivable servers require an authentication file

Answer 105

System Platform

Answer 106

Utility Server

Answer 107

Communication Manager 6.0

Answer 108

Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.

Answer 109

Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting.

Answer 110

Insert the raid CD, reboot the server, and than take backup.

Answer 111

Insert the hard drive and the 3rd hard drive is incorporated automatically.

Answer 112

add surviveable-processor

Answer 113

add survivable-processor ess <node-name>

Answer 114

add survivable-processor core

Answer 115

add survivable-processor <node-name>

Answer 116

New station 1000

Answer 117

Add station 1000

Answer 118

Build station 1000

Answer 119

Add set 1000

Answer 120

Utility services

Answer 121

Session manager 6.0

Answer 122

Avaya Enablement Services (AES)

Answer 123

Show media-gateway 3

Answer 124

Display media-gateway 3

Answer 125

Print media-gateway 3

Answer 126

View media-gateway 3

Answer 127

By accessing the web interface of CM

Answer 128

Using the load license command through shell prompt of CM

Answer 129

Through the web interface of DOM0

Answer 130

Using the web interface of Console Domain

Answer 131

Click the system wide Messaging parameters, than switch integration type field.

Answer 132

Click the switch link administration, and then switch type.

Answer 133

Click integration type

Answer 134

Click Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field

Answer 135

CM_Simplex

Answer 136

CM_survRemote_Embeded

Answer 137

CM_onlyEmbeded

Answer 138

Show serial number

Answer 139

Show system

Answer 140

Print G450

Answer 141

Network region

Answer 142

Gateway node name

Answer 143

Duplicate node name

Answer 144

Execute the communication manager command display alarms, to set whether the link loss delay timer has expired.

Answer 145

Execute the communication manager command display alarms, to see whether the no service timeout timer (NSTT) has expired.

Answer 146

Execute the SAT command list media-gateway from the remote survivable server, to determine whether media gateway is registered to the survivable server.

Answer 147

Execute the SAT command list media-gateway to determine which media gateways are not registered to the main server.

Answer 148

Execute the command status H.248 link from the remote gateway, to determine whether the link to the main server is active.

Answer 149

Confirm that the registered field on the Communication Manager displays media-gateway to Y.

Answer 150

Conform that the PE interface is active by executing the communication manager display processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.

Answer 151

Use the show MGC command on the media gateway to confirm the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway.

Answer 152

Use the list registered -P -station command on the communication manager to determine whether the user on the media gateway is registered.

Answer 153

Use the list survivable processor command to confirm that the survivable server is registered to the main communication manager.

Answer 154

By going to the home page of console domain.

Answer 155

By going to the homepage of Avaya communication manager.

Answer 156

By going to the home page of Dom 0

Answer 157

By using the internet explorer http://Cdom .lpaddr/vm

Answer 158

Show main log 0800 101010

Answer 159

Displog-1 maint-d 10/10/10 08:00

Answer 160

Print log for maint 101010 08:00

Answer 161

Print-1 maint-d 08:00 10/10/10

Answer 162

The MAC address of the Console domain

Answer 163

The MAC address of the CM eth0 port

Answer 164

The MAC address of the CM host name

Answer 165

The MAC address of the DOM0

Answer 166

The installer used the wrong interface to install the license and it is therefore not installed.

Answer 167

The server cannot communicate with the IPSI or media gateway whose serial number was used in the license file.

Answer 168

The license audit runs every 60 minutes and the error will be resolved in 15 minutes.

Answer 169

The installer loaded a license for one of the survivable servers, not the main server, and the IPSIs, media Gateways, and/or IP phones have registered to it

Answer 170

Backup/restore

Answer 171

Backup now

Answer 172

Schedule backup

Answer 173

Backup/restore later

Answer 174

List trace station 1111

Answer 175

List trace station 3333

Answer 176

Status station 1111

Answer 177

Display station 3333

Answer 178

Welcome to Audix

Answer 179

Welcome to messaging

Answer 180

Your call is being answered by Audix

Answer 181

Please leave a message after the tone

Answer 182

Serial number

Answer 183

License activation code

Answer 184

MAC address

Answer 185

Platform type

Answer 186

From browser logged into Systen Management Console, verify cm and utility_Server appear and application state is running.

Answer 187

From a browser using the communication Manager IP address, successfullylog into the communication manager system management interface (SMI)

Answer 188

When monitoring the template installation workflow status, verify the message, "Wizard completely successfully" displays.

Answer 189

From a browser logged into communication manager, select administration > server( maintenance)> server>process status, click on view and verify communicaMgr appears

Answer 190

S8730 Server 8Gb RAM

Answer 191

S8800 Server

Answer 192

S8510Server with 8GB RAM

Answer 193

S8300D Server

Answer 194

Hairpining does not use media processor resources.

Answer 195

The audio connection type field on the communication manager status station formation can be used to determine whether a call is shuffled.

Answer 196

A call between a DCP endpoint and H.323 end point can be shuffled.

Answer 197

Shuffling release media processor resources.

Answer 198

no port network

Answer 199

63 port networks

Answer 200

64 port networks

Answer 201

126 port networks

Answer 202

Verify that the TN2602 Media resources circuit pack has the correct IP settings.

Answer 203

Verify that the processor Ethernet mode is enabled in the Server.

Answer 204

Set a static IP address on a laptop and see if the server can be pined

Answer 205

Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.

Answer 206

Call one of the two stations that you set as subscriber to the messaging server, and let the call go to coverage

Answer 207

Leave message on a covered call and verify that the message waiting indicator (MWI) lamp on the receiving extension is lit.

Answer 208

Call the station and after the call is answered leave a message.

Answer 209

Call the messaging hunt group from any of the stations to ensure it is answering.

Answer 210

Log into communication manager messaging to verify CDOM is running.

Answer 211

Connect the SAT terminal login using the craft, and then enable using the enable messaging command.

Answer 212

Open the communication manager IP address using web browser. Login as craft, click installation, than communication manager messaging.

Answer 213

Open the communication manager IP address using web browser. Login as craft; click Administration, then server (maintenance), than click miscellaneous, than messaging software, and than click enable

Answer 214

Communication manager messaging is enabled by default after the installation.

Answer 215

H.323/Q. Sig protocol

Answer 216

RTP protocol

Answer 217

SSP protocol

Answer 218

SIP protocol

Answer 219

Neither PROCR nor CLANs were administered in network region 100

Answer 220

There are no Medpros or H.248 Media Gateways administered in network region 100

Answer 221

Network region 100 is not configured to communicate with other network regions

Answer 222

On the IP interface form, some one recently set the field "Allow H.323 registration" to `n'

Answer 223

Mailboxes are enabled in the communication manager 6.0 license file.

Answer 224

Mailboxes are enabled by a separate license that needs to be generated and deployed.

Answer 225

Mailboxes are enabled by default.

Answer 226

Mailboxes are enabled in the system Parameter features form.

Answer 227

S8730 Servers with 8 GB RAM

Answer 228

S8800 Servers

Answer 229

S8510 Server with 8 GB RAM

Answer 230

S8300D Server

Answer 231

Feature Server

Answer 232

Signal Servers

Answer 233

Evolution Server

Answer 234

System Management

	Erstellt von AndreCMartinez vor mehr als 9 Jahre

Nächster

Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Beschreibung

Zusammenfassung der Ressource

Frage 1

Frage 2

Frage 3

Frage 4

Frage 5

Frage 6

Frage 7

Frage 8

Frage 9

Frage 10

Frage 11

Frage 12

Frage 13

Frage 14

Frage 15

Frage 16

Frage 17

Frage 18

Frage 19

Frage 20

Frage 21

Frage 22

Frage 23

Frage 24

Frage 25

Frage 26

Frage 27

Frage 28

Frage 29

Frage 30

Frage 31

Frage 32

Frage 33

Frage 34

Frage 35

Frage 36

Frage 37

Frage 38

Frage 39

Frage 40

Frage 41

Frage 42

Frage 43

Frage 44

Frage 45

Frage 46

Frage 47

Frage 48

Frage 49

Frage 50

Frage 51

Frage 52

Frage 53

Frage 54

Frage 55

Frage 56

Frage 57

Frage 58

Frage 59

Frage 60

Frage 61

Frage 62

Frage 63

Frage 64

Frage 65

Frage 66

Frage 67

Frage 68

Frage 69

ähnlicher Inhalt