2570273
Beschreibung
Quiz von Del Sutton, aktualisiert more than 1 year ago
|
Erstellt von Del Sutton
vor mehr als 9 Jahre
|
|
Frage 1
Frage
Access Control Lists:
Antworten
-
Filter network traffic by controlling weather routed packets are forwarded or blocked at the router's interfaces.
-
determine the upper layer protocol access rights only.
-
Permit the router examines each packet to determine whether to forward or drop the packet, based on the what you specified within the access lists.
-
Criteria could be the source address of the traffic, the destination address of the traffic, the upper-layer protocol or the information
Frage 2
Frage
You Can control access to the router using the following methods
Antworten
-
Console Access
-
Telnet/SSH Access
-
SNMP Access
-
Controlling Access to the Network Servers That Contain Configuration Files
Frage 3
Frage
Masquerading (NAPT) is not used very much in residential application as such applications tend to use Dynamic NAT
Antworten
- True
- False
Frage 4
Frage
Match the Well-Known IP Protocol Port Numbers
Antworten
-
FTP Data : 20
-
FTP program : 21
-
DNS : 53
-
SMTP : 25
-
Telnet : 23
-
TFTP : 69
Frage 5
Frage
IP Extended Access Lists are always configured with an ACL protocol number between 1-99
Antworten
- True
- False
Frage 6
Frage
Why You Should Configure Access Lists
Antworten
-
To restrict use access to the "show running-config" command
-
To restrict contents of routing updates
-
To provide traffic flow control
-
To provide security for your network
Frage 7
Frage
The command: ip nat inside source list 10 interface serial0/0 overload means:
Antworten
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated. The overload command overrides any instances of overloading.
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated until the overload command is issued by the administrator,
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated until the point where the system becomes overloaded.
-
The private IP addresses in the access-list 10 are allowed access to the serial0/0 interface where they will be Network Address Translated. The overload keyword specifies that these multiple internal LAN addresses can be Network Address Translated to that single instance.
Frage 8
Frage
An ACL in Cisco IOS parlance is an Accounting Control Link (ACL)
Antworten
- True
- False
Frage 9
Frage
access-class access-list number (in|out)
Antworten
-
access-class assigns access lists to a Cisco interface
-
access-class assigns access lists to a particular Cisco line like VTY terminals.
-
access-class assigns access lists to a particular Cisco VLAN tag
-
access-class assigns access lists to a particular Cisco Access interface.
Frage 10
Frage
______________________ address translation is necessary when the number of IP's to translate does not equal the number of IP's to translate to, or they are equal but for some reason it is not desirable to have a static Mapping ....(not multiple choice in exam)
Antworten
-
Static
-
Dynamic
-
Variable
-
Floppy
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.