Zusammenfassung der Ressource
Frage 1
Frage
What sort of lead does a microphone use?
Frage 2
Frage
What does the 'U' stand for on the mixer?
Antworten
-
Unitary
-
Unlimited
-
Unlikeable
-
Unstoppable
Frage 3
Frage
Before you plug anything in, what positions should be the faders be at?
Antworten
-
In the middle
-
All the way down
-
All the way up
Frage 4
Frage
When turning on your system, what should be turned on LAST?
Frage 5
Frage
There are two different types of microphone. What are they?
Antworten
-
Conductor
-
Condensor
-
Circuit
-
Dynamic
-
Live
-
Electro
Frage 6
Frage
Turning up the microphone too loud will result in feedback, if amplified through the speakers
Frage 7
Frage
What does this button do in Cubase?
Frage 8
Frage
What sort of level should be aiming at the highest when recording?
Antworten
-
No higher than -48
-
No higher than -36
-
No higher than -24
-
No higher than -12
-
No higher than 0
Frage 9
Frage
What is the main difference between a mic and a line signal?
Antworten
-
Mic signals are strong, line signals are weaker
-
Line signals are stronger, mic signals are weaker
-
There is no difference
Frage 10
Frage
What controls the amount of sound coming into the audio interface?
Antworten
-
The volume of the singer
-
The noise level outside
-
The input gain
-
The channel fader
Frage 11
Frage 12
Frage
What sort of track is used to record your sound into Cubase?
Antworten
-
Audio track
-
FX track
-
Instrument track
Frage 13
Frage
Which one of these is NOT a real effect?
Antworten
-
Reverb
-
Delay
-
Distortion
-
Filter
-
Flanger
-
Fader
Frage 14
Frage
What sort of signal do you need to record a microphone?
Frage 15
Antworten
-
A echo, where the sound bounces straight back at you
-
A simulation of a space, such as a church or hall
-
An effect that gets rid of certain frequencies
Frage 16
Frage
What does the red record button do on the channel strip in Cubase?
Frage 17
Frage
What level should the faders be at while recording?
Antworten
-
Up full
-
Down to the bottom
-
At '0' or 'U'
Frage 18
Frage
If you cannot hear your sound, what would you NOT do?
Antworten
-
Look at the meters to see if the sound is coming in
-
Check all cable connections carefully
-
Turn everything up full
-
Adjust the input gain and see if anything changes with that
Frage 19
Frage
How many clicks do you get as a pre-count?
Frage 20
Frage
How do we change the tempo in Cubase?