4394252
Beschreibung
Quiz von TRAVIS CANNING, aktualisiert more than 1 year ago
|
Erstellt von TRAVIS CANNING
vor mehr als 8 Jahre
|
|
Frage 1
Frage
Thermo Loads are
Antworten
-
Loads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
-
loads are transient and, when the occur, can result In the production of vibratory forces
-
The design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
Pressure vessels located outdoors have additional stresses imposed by wind.
Frage 2
Frage
The ______ code uses area replacement as the basis for reinforcement calculations
Antworten
-
csa b51
-
csa b52
-
asme
-
wleders
Frage 3
Frage
Design pressure is
Antworten
-
a higher pressure than the operating pressure and is used to determine the minimum required thickness for the pressure vessel
-
the minimum required pressure
-
equal to the operating pressure
-
1.5 times the maximum working pressure
Frage 4
Frage
Attachment loads are
Antworten
-
Loads caused by piping and equipment attached to the pressure vessel and transferred to the vessel by nozzles
-
loads are transient, and when they occur can result in the production of vibratory forces
-
the design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
pressure vessels located outdoors have additional stresses imposed by wind
Frage 5
Frage
Routine ________ is the key to maximizing the production and life of pressure vessels
Antworten
-
testing
-
operations
-
shutdowns
-
maintenance
Frage 6
Frage
___________ ______ are leak proof containers that have an internal or external operating pressure
Antworten
-
pressure vessels
-
Fired boilers
-
Fractionation towers
-
Milk cartons
Frage 7
Frage
Seismic loads are:
Antworten
-
Loads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
-
loads are transient and, when they occur, can result in the production of vibratory forces
-
The design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
-
Pressure vessels located outdoors have additional stresses imposed by wind.
Frage 8
Frage
It is standard practice to __________ an opening with the same cross-sectional area that was removed.
Antworten
-
make
-
reinforce
-
cut
-
replace
Frage 9
Frage
The primary hazard in __________ testing is the amount of energy stored in the compressed gas during the test.
Antworten
-
hydrostatic
-
pneumatic
-
radiography
-
mag particle
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.