4.8 Compressor Theory and Designs

Beschreibung

power engineering 3b2 Quiz am 4.8 Compressor Theory and Designs, erstellt von TRAVIS CANNING am 29/02/2016.
TRAVIS CANNING
Quiz von TRAVIS CANNING, aktualisiert more than 1 year ago
TRAVIS CANNING
Erstellt von TRAVIS CANNING vor fast 9 Jahre
16
1

Zusammenfassung der Ressource

Frage 1

Frage
Compressor lubrication may be divided into two main sections _______ lubrication and ________ lubrication 1. Peripheral 2. Internal 3. Splash 4. External 5. Pressure
Antworten
  • 1,2
  • 3,5
  • 2,3,4
  • 2,4

Frage 2

Frage
A double acting reciprocating compressor:
Antworten
  • Receives and compresses air at the head end of the cylinder
  • Receives and discharges air at both ends of the cylinder
  • Increases the pressure twice from the inlet valve
  • Has one compression stroke for every crankshaft revolution
  • Must have at least two pistons

Frage 3

Frage
Two pre-filters are installed on a package industrial screw compressor. They are installed at the inlet of the:
Antworten
  • Water/oil seperator
  • Air dryer
  • After filter
  • Air fluid seperator
  • Moisture seperator

Frage 4

Frage
Reciprocating Compressor valves are usually automatic and open and close by:
Antworten
  • Action of a poppet valve
  • Movement of the piston covering or uncovering ports
  • Operation of an air solenoid valve
  • A pressure difference
  • A camshaft

Frage 5

Frage
The axial flow compressor's basic operating principle is similar to a:
Antworten
  • Centrifugal compressor
  • Reciprocating compressor
  • Reaction turbine in reverse
  • Reaction turbine
  • Rotary compressor

Frage 6

Frage
The compression Ratio is the ratio of:
Antworten
  • Absolute discharge pressure to absolute inlet pressure
  • Gauge discharge pressure to gauge inlet pressure
  • The free air intake to the absolute volumetric discharge
  • The gauge inlet pressure to the absolute discharge pressure
  • Piston diameter to piston stroke

Frage 7

Frage
In a packaged screw compressor package, the bulk of the moisture is removed in the moisture separator in order to decrease the load in the:
Antworten
  • Air/fluid seperator
  • Pre-filter
  • Air dryer
  • After filter
  • Water/Oil seperator

Frage 8

Frage
The prime purpose of water-cooling or air cooling an air compressors cylinder is to:
Antworten
  • Cool the air
  • Reduce moisture and volume of the air
  • Keep the cylinder at a reasonable temperature
  • Prevent fire from occurring in the receiver
  • Prevent operator injury

Frage 9

Frage
An important advantage of a sliding vane compressor is that it:
Antworten
  • Does not require internal lubrication
  • Has a high starting torque
  • Does not require inlet or discharge valves
  • Requires light nylon timing gears
  • Does not require a prime mover

Frage 10

Frage
An air filter on an air compressor inlet pipe is used to:
Antworten
  • Reduce the air velocity
  • Keep out the moisture
  • Purify the air by removing exhaust process gases
  • Prevent dust and other particulate from entering the compressor
  • Increase the air velocity
Zusammenfassung anzeigen Zusammenfassung ausblenden

ähnlicher Inhalt

Histologie
Nicole Nafzger
Globalization – global challenges
ExamTime Bewerter
PSYCH
frau planlos
Differenzialrechnung (Analysis) Zusammenfassung
Antonia C
Matura Übungen Funktionale Abhängigkeiten
erwin.premstalle
KFOR Univie (mögliche Prüfungsfragen)
frau planlos
Vetie - Biochemie - Formelsammlung
Fioras Hu
Vetie Pathohisto 2019
Kristin E
Vetie Reprospaß
Tropsi B
Vetie Geflüglekrankheiten altfragen 2020
Taissa Fraga de Almeida
Vetie Berufsrecht 2021
Mascha K.