4728880
Beschreibung
Quiz von Brian Gamble, aktualisiert more than 1 year ago
|
Erstellt von Brian Gamble
vor mehr als 8 Jahre
|
|
Frage 1
Frage
A PC opens a command prompt and uses the ipconfig command to see that the PC’s IP address and mask are 192.168.4.77 and 255.255.255.224. The user then runs a test using the ping 192.168.4.117command. Which of the following answers is the most likely to happen?
Antworten
-
The PC sends packets directly to the host with address 192.168.4.117.
-
The PC sends packets to its default gateway.
-
The PC sends a DNS query for 192.168.4.117.
-
The PC sends an ARP looking for the MAC address of the DHCP server.
Frage 2
Frage
Router R1 lists a route in its routing table. Which of the following answers list a fact from a route, that the router then compares to the packet’s destination address? (Choose 2 answers.)
Antworten
-
Mask
-
Next-hop router
-
Subnet ID
-
Outgoing interface
Frage 3
Frage
Router 1 has a Fast Ethernet interface 0/0 with IP address 10.1.1.1. The interface is connected to a switch. This connection is then migrated to use 802.1Q trunking. Which of the following commands could be part of a valid configuration for Router 1’s Fa0/0 interface? (Choose two answers.)
Antworten
-
interface fastethernet 0/0.4
-
dot1q enable
-
dot1q enable 4
-
trunking enable
-
trunking enable 4
-
encapsulation dot1q 4
Frage 4
Frage
A router is configured with the no ip subnet-zero global configuration command. Which of the following interface subcommands would not be accepted by this router?
Antworten
-
ip address 10.1.1.1 255.255.255.0
-
ip address 10.0.0.129 255.255.255.128
-
ip address 10.1.2.2 255.254.0.0
-
ip address 10.0.0.5 255.255.255.252
Frage 5
Frage
A Layer 3 switch has been configured to route IP packets between VLANs 1, 2, and 3, which connect to subnets 172.20.1.0/25, 172.20.2.0/25, and 172.20.3.0/25, respectively. The engineer issues a show ip route command on the Layer 3 switch, listing the connected routes. Which of the following answers lists a piece of information that should be in at least one of the routes?
Antworten
-
Interface Gigabit Ethernet 0/0.3
-
Next-hop router 172.20.4.1
-
Interface VLAN 2
-
Mask 255.255.255.0
Frage 6
Frage
An engineer configures a static IPv4 route on Router R1. Which of the following pieces of information should not be listed as a parameter in the configuration command that creates this static IPv4 route?
Antworten
-
The destination subnet’s subnet ID
-
The next-hop router’s IP address
-
The next-hop router’s neighboring interface
-
The subnet mask
Frage 7
Frage
Which of the following commands correctly configures a static route?
Antworten
-
ip route 10.1.3.0 255.255.255.0 10.1.130.253
-
ip route 10.1.3.0 serial 0
-
ip route 10.1.3.0 /24 10.1.130.253
-
ip route 10.1.3.0 /24 serial 0
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.