6974778
Beschreibung
Quiz von Mario Pérez Ramos, aktualisiert more than 1 year ago
|
Erstellt von Mario Pérez Ramos
vor etwa 8 Jahre
|
|
Frage 1
Frage
1.Which four actions can be selected with the Bulk Administration Tool in Cisco Unity Connection?
(Choose four.)
Antworten
-
A. Create
-
B. Modify
-
C. Migrate
-
D. Update
-
E. Delete
-
F. Export
-
G. Purge
-
H. Manage
Frage 2
Frage
2.Users report that no phone numbers are listed in the corporate directory, but the employee names are
listed. Which option must be verified in Cisco Unified Communications Manager Administration to display
the directory numbers?
Antworten
-
A. The primary extension is configured.
-
B. The user's phones are listed as a controlled device.
-
C. Users are associated with their directory number.
-
D. The telephone number field has been filled in appropriately.
Frage 3
Frage
3.An end user is running Cisco Jabber on the desktop. Which two icons must be selected to make a video
call? (Choose two.)
Antworten
-
A. Contacts icon
-
B. phone icon
-
C. person icon
-
D. message ico
-
E. web video conferencing icon
Frage 4
Frage
4.An engineer wants to ensure that Cisco Jabber clients can communicate with instant messaging clients
who are not registered to the same Jabber cluster. Which technology meets this requirement?
Antworten
-
A. intercluster trunk
-
B. federation
-
C. SIP trunk
-
D. PRI
Frage 5
Frage
5.A network engineer must set up an end-user account for a SIP device to use for authentication. Which
end-user information is used for SIP authentication?
Antworten
-
A. account ID
-
B. password
-
C. PIN
-
D. digest credentials
Frage 6
Frage
6.Use the exhibits below to answer the question.
A new phone has been added to the Cisco Unified Communications Manager, but is not registering
properly. What is causing this failure?
Antworten
-
A. Device Pool cannot be default
-
B. phonei_css is the incorrect calling search space2
-
C. 9971 Phones do not support SIP
-
D. The location Hub_None has not been activated
-
E. MAC address is incorrect
Frage 7
Frage
7.Which scenario allows user A in partition X to call user B in Cisco Unified Communications Manager?
Antworten
-
A. User B in partition X is not assigned to any CSS.
-
B. User B in partition Y assigns both partitions to CSS-X.
-
C. User B is not assigned to any partition or CSS.
-
D. User B is assigned to partition Y and assigns to CSS-X.
Frage 8
Frage
8.Which two items must first be configured before users can be added into Unity Connection via the Bulk
Administration Tool? (Choose two.)
Antworten
-
A. partitions
-
B. classes of service
-
C. search spaces
-
D. user templates
-
E. schedules
Frage 9
Frage
9.Which Cisco Unified Communications Manager plug in allows administrators to proactively monitor the
overall health of their Cisco cluster?
Antworten
-
A. RTMT
-
B. Cisco AXL Toolkit
-
C. Cisco CTL Client
-
D. Cisco JTAPI
-
E. Cisco TAPS
Frage 10
Frage
10.What is the interface type that you should use to connect a PSTN analog line to the VoIP network?
Antworten
-
A. FXS
-
B. FXO
-
C. E and M
-
D. Serial
Frage 11
Frage
11.Which four fields must an administrator complete to create a new user in Cisco Unity Connection?
(Choose four.)
Antworten
-
A. Alias
-
B. User type
-
C. Extension
-
D. Corporate email address
-
E. First name
-
F. Last name
-
G. Employee ID
-
H. Template
Frage 12
Frage
12.An engineer receives a service ticket because a user cannot log into Cisco Unified CM User Options.
Where can the engineer verify that the user account is active?
Antworten
-
A. LDAP System Configuration
-
B. LDAP Directory
-
C. End User Configuration
-
D. LDAP Authentication
-
E. Route Plan Report
Frage 13
Frage
13.Which Cisco Unified CME GUI menu option is used to navigate to the screen used to add or change a
user name or password using the Cisco Unified CME GUI interface?
Antworten
-
A. Administration > Update System Info
-
B. Configure > System Parameters
-
C. Configure > Phones
-
D. Configure > Extensions
Frage 14
Frage
14.What is the maximum number of digits that an ephone PIN can have to allow after-hour exempt calling
privileges?
Antworten
-
A. 4
-
B. 6
-
C. 7
-
D. 8
-
E. 9
Frage 15
Frage
15.Which Cisco Unified Communications Manager system report shows high and low call volume
patterns?
Antworten
-
A. CAR report
-
B. QoS by Gateway
-
C. QoS by call types
-
D. Traffic summary
-
E. Traffic summary by extension
Frage 16
Frage
16.An end user has an 7945 IP phone, but is unable to launch any of the IP phone applications. A network
engineer has confirmed that the device is subscribed to the appropriate applications in Cisco Unified
Communications Manager.
How should the engineer instruct the user to launch the IP phone applications?
Antworten
-
A. Select the "?" button on the IP phone.
-
B. Select the globe button on the IP phone.
-
C. Select Settings > User Preferences.
-
D. Select Settings > Device Configuration.
Frage 17
Frage
17.A voice engineer is moving an IP phone from one secure Cisco Unified Communications Manager
cluster to another. The phones are not registering to the new cluster. Which task resolves this issue?
Antworten
-
A. reset the phones
-
B. restart the phones
-
C. delete the CTL file from each phone manually
-
D. use the Bulk Administration Tool to import the phones
Frage 18
Frage
18.An engineer needs to block any outbound calls to specific numbers. Which dial plan element is used to
restrict called numbers?
Antworten
-
A. partition
-
B. route group
-
C. route list
-
D. calling search space
Frage 19
Frage
19.Use the router console to view the configuration and answer the question.
Emergency calls from a Branch router phone is failing. From the router configuration information provided,
why is this call failing?
Antworten
-
A. The dial-peer port assignment is incorrect
-
B. the digit string prefix is missing
-
C. The destination pattern is incorrect
-
D. digit stripping needs to be performed
Frage 20
Frage
20.An administrator wants to verify that a new PRI is properly connected to the PSTN status. Which Layer
2 status should be seen?
Antworten
-
A. MULTIPLE_FRAME_ESTABLISHED
-
B. TEI_ASSIGNED
-
C. LINK_UP
-
D. CONTROLLER_UP
Frage 21
Frage
21.A user needs to access CAR logs to adjust settings. Which two options are required? (Choose two.)
Antworten
-
A. The user account has the Standard CAR Admin Users role.
-
B. The user must log in at https://<Server-ip/name>:8443/car/Logon.jsp.
-
C. The user must log in at https://<Server-ip/name>:8443/cdr/Logon.jsp.
-
D. The user account has the CTI Enabled role.
-
E. The user account has the Standard CAR role.
Frage 22
Frage
22.On the PSTN gateway, a network engineer runs sh isdn status and finds the Layer 2 state of each
interface to be "TEI_ASSIGNED". What is the status of PSTN connectivity from this gateway?
Antworten
-
A. The T1 interfaces are established and operational.
-
B. This information does not indicate the status of PSTN connectivity from the gateway
-
C. The T1 interfaces are down.
-
D. The T1 interfaces are being tested by the carrier.
Frage 23
Frage
23.Which Cisco Unified Communications Manager protocol communicates with collaboration endpoints?
Antworten
-
A. SCCP
-
B. RTP
-
C. SIP
-
D. CDP
Frage 24
Frage
24.Which Cisco Unified Communications Manager device report provides key information to determine if
an additional gateway is needed?
Antworten
-
A. Gateway utilization
-
B. Gateway summary
-
C. Gateway detail
-
D. Gateway and line group utilization
Frage 25
Frage
25.An end user is experiencing performance issues with their IP phone. Which phone feature could the
administrator configure to allow the end user to notify them when issues occur?
Antworten
-
A. Cisco Quality Report Tool
-
B. System Log Management
-
C. Cisco CDR Analysis and Reporting
-
D. Cisco JTAPI
Frage 26
Frage
26.A field technician must reset a single 7965 IP phone so that it will be discovered on the network again
and request an IP address from DCHP. Which steps should the network engineer provide?
Antworten
-
A. Have field technician select the Settings button on phone, then dial # # * * *
-
B. Have field technician select the Settings button on phone, then dial # # * # #
-
C. Have field technician select the Settings button on phone, then dial * * # * *
-
D. Have field technician select the Settings button on phone, then dial * * # # #
Frage 27
Frage
27.User A needs to have a line shared on the user B phone. Both phones register with Cisco Unified
Communications Manager. Which method can be used from Cisco Unified Communications Manager
Administration web pages to configure a shared line on the user B phone?
Antworten
-
A. Navigate to the user B phone > Add the user A DN.
-
B. Navigate to the user B phone > Shared Line > Add the user A DN.
-
C. Navigate to DN configuration > Shared Line > Add the user A DN.
-
D. Navigate to end user configuration > Shared Line > Add the user A DN.
Frage 28
Frage
28.An engineer is adding user accounts to Cisco Unity Connection and needs to limit the maximum length
of messages. Which aspect defines this limit when adding new accounts?
Antworten
-
A. user templates
-
B. user partitions and search spaces
-
C. user CoS
-
D. user mailbox store
-
E. user roles
Frage 29
Frage
29.Which two protocols does Jabber use to achieve Presence status? (Choose two.)
Antworten
-
A. SIP/SIMPLE
-
B. XMPP
-
C. SCCP
-
D. MGCP
-
E. SOAP
Frage 30
Frage
30.An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified
Communications Manager Express. During the active call, call waiting indicates a second call is incoming
to the handset, but the user decides to ignore it. In this scenario, what is the combined total number of
signaling conversations and media flows that used the SCCP phone as an endpoint?
Antworten
-
A. 2
-
B. 3
-
C. 4
-
D. 5
-
E. 6
Frage 31
Frage
31.Which three locations can an administrator import from to create users on Cisco Unity Connection?
(Choose three.)
Antworten
-
A. Bulk administration tool
-
B. LDAP
-
C. Cisco Unified Communications Manager via AXL
-
D. Outlook
-
E. Presence
-
F. Cisco Compatible Extensions
Frage 32
Frage
32.Which describes how to provide a third directory number button and a BLF speed dial for twelve of the
Cisco Unified IP Phone 7965?
Antworten
-
A. Modify the Standard User softkey template.
-
B. Copy the Standard User softkey template, name it, and add the requested features.
-
C. Copy the Standard 7965 SCCP phone button template, rename it, and add the requested features.
-
D. It is not possible to add a third DN and a BLF speed dial to the IP Phone 7965 IP.
Frage 33
Frage
33.Use the router console to view the configuration and answer the question.
When a call is placed from the Branch Router phone to the PSTN number of 914085551212, the call is
failing. What dial-peer is supposed to be used and why is the call failing? Select 2 (two)
Antworten
-
A. dial-peer voice 910 pots
-
B. dial-peer voice 9 pots
-
C. dial-peer voice 9001 voip
-
D. destination pattern is incorrect
-
E. prefix is missing from the dial-peer
-
F. the port assignment is incorrect in the dial-peer
-
G. the port number is missing in the dial-peer
Frage 34
Frage
34.A user is required to answer voicemail for two lines but would like them to be filtered to only one
mailbox. How can you accomplish this request?
Antworten
-
A. Provide multiple mailboxes for one Cisco Unity Connection user.
-
B. Add an alternate extension.
-
C. Create a shared mailbox.
-
D. Initiate interview handler.
Frage 35
Frage
35.Which two user types are available to a voice engineer adding a user in Cisco Unity Connection?
(Choose two.)
Antworten
-
A. User with mailbox
-
B. Imported user
-
C. Synch user
-
D. User without mailbox
-
E. Local admin user with mailbox
Frage 36
Frage
36.What is one advantage of importing Cisco Unity Connection users from Cisco Unified
Communications Manager?
Antworten
-
A. The extension can be manually changed.
-
B. The extension stays synchronized with the user extension.
-
C. Voicemail features can be administered.
-
D. Voicemail does not require an additional license.
Frage 37
Frage
37.An engineer is adding four cordless analog phones to Cisco Unified Communications Manager. Which
solution best meets this requirement?
Antworten
-
A. Cisco VG202 Analog Voice Gateway
-
B. Cisco VG204 Analog Voice Gateway
-
C. Cisco VG224 Analog Voice Gateway
-
D. Cisco VG350 Analog Voice Gateway
Frage 38
Frage
38.What is the recommended maximum one-way latency for voice and video networks?
Antworten
-
A. 100 ms
-
B. 150 ms
-
C. 200 ms
-
D. 300 ms
Frage 39
Frage
39.Which report in the CAR tool provides information about the call volume for a specified period?
Antworten
-
A. traffic summary report
-
B. Top N duration report
-
C. precedence call summary report
-
D. gateway utilization report
Frage 40
Frage
40.Which option can an administrator use to add users to Cisco Unity Connection in different time zones?
Antworten
-
A. User Templates
-
B. Call Handler Template
-
C. Contact Template
-
D. Directory Handler
-
E. Interview Handler
Frage 41
Frage
41.A user is assigned more than one directory number. Which option allows one voicemail box to serve
both directory numbers?
Antworten
-
A. Alternate Extension
-
B. Notification Devices
-
C. Alternate Names
-
D. Message Settings
-
E. Caller Input
-
F. Mailbox
Frage 42
Frage
42.An end user has made more attempts to log in than allowed, using the wrong voice-mail pin. The user
has been locked out. Which submenu does an administrator select to unlock the pin?
Antworten
-
A. Change password
-
B. Password settings
-
C. Message settings
-
D. Mailbox
Frage 43
Frage
43.A company has invested in an on-premises VoIP solution. For design simplicity purposes, network
engineers have opted to use a single VLAN for both data and voice traffic. Shortly after implementing IP
phones, customers are reporting problems. Which two potential problems may be reported about the calls as a result of this design decision?
(Choose two.)
Antworten
-
A. jitter detected in voice calls
-
B. problems with email latency
-
C. slow internet download speeds
-
D. choppy voice calls
-
E. PCs are getting IP addresses but phones are not
Frage 44
Frage
44.Which three choices are required for the boot process for a Cisco IP phone? (Choose three.)
Antworten
-
A. TFTP services
-
B. DHCP services
-
C. Voice VLAN
-
D. Routing protocol
-
E. TCP/IP
-
F. PortFast
Frage 45
Frage
45.Which server does Cisco recommend that you configure before a CUCM backup?
Antworten
-
A. SFTP
-
B. FTP
-
C. SNMP
-
D. TFTP
Frage 46
Frage
46.Which two layers are Cisco Unified Communications component layers? (Choose two.)
Antworten
-
A. Infrastructure layer
-
B. Data link layer
-
C. Network layer
-
D. Endpoints layer
-
E. Transport layer
Frage 47
Frage
47.For which three reasons would a voice engineer create a separate user template in Cisco Unity
Connection? (Choose three.)
Antworten
-
A. Certain users changed their extensions.
-
B. Certain users are in a different partition.
-
C. Certain users are using a different call handler.
-
D. Certain users are using a different phone system.
-
E. Certain users are being added to Cisco Unified Presence Server.
-
F. Certain users are being moved to a different branch office.
Frage 48
Frage
48.Which two technologies comprise a Cisco Presence deployment? (Choose two.)
Antworten
-
A. Cisco Unified Presence Server
-
B. Cisco Unity Connection
-
C. Cisco Unified Communications Manager
-
D. Active Directory
-
E. Cisco Unified Border Element
-
F. Cisco Expressway
Frage 49
Frage
49.A systems administrator wants to integrate a new Cisco Unity Connection cluster with an existing
directory in the enterprise. What is one valid user import source?
Antworten
-
A. Cisco Unified Communications Manager AXL server
-
B. Cisco Unified Communications Manager CTI server
-
C. Cisco Unified Communications Manager TFTP server
-
D. Cisco Unified Communications Manager MOH server
Frage 50
Frage
50.Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500
MCU?
Antworten
-
A. Static<ip address><netmask><default gateway><DNS server address>
-
B. Network ip<ip address><netmask><default gateway><DNS server address>
-
C. Xconfig network address<ip address><netmask><default gateway>
-
D. Xconfig network address<ip address><netmask><default gateway><DNS server address>
Frage 51
Frage
51.An administrator group is looking to on-board multiple users with Cisco Unified Communications
Manager at one time. Which option should be used?
Antworten
-
A. Bulk Administration Tool
-
B. Product Upgrade Tool
-
C. Command Lookup Tool
-
D. Cisco Unified Communications Manager User Options Page
-
E. Cisco Upload Tool
Frage 52
Antworten
-
DRAG
-
DROP
Frage 53
Frage
53.Which two tools can be used to measure the quality of a VoIP call? (Choose two.)
Antworten
-
A. QoS configuration tool
-
B. mean opinion score tool
-
C. bulk administration tool
-
D. jitter compensation tool
-
E. rFactor tool
Frage 54
Frage
54.Use the exhibits below to answer the question.
What two issues could be causing the Cisco Jabber failure shown in the exhibit? (Choose two)
Antworten
-
A. Incorrect username and password
-
B. IM & Presence server is down
-
C. User is not associated with the device
-
D. IP or DNS name resolution issue
-
E. CSF Device is not registered.
-
F. IP Phone DN not associated with the user
Frage 55
Frage
55.An administrator has been deleting phones from Cisco Unified Communications Manager, but would
like to reassign those directory numbers. Which two configuration areas within Cisco Unified
Communications Manager allow the administrator to perform this task? (Choose two.)
Antworten
-
A. directory number
-
B. route plan report
-
C. dial rules
-
D. intercluster directory URI
-
E. dial plan installer
Frage 56
Frage
56.An engineer is adding a third-party video endpoint to Cisco Unified Communications Manager. Which
third-party device type should be used when adding the system?
Antworten
-
A. SCCP
-
B. SIP
-
C. MGCP
-
D. H.323
Frage 57
Frage
57.The Cisco Unified Communications administrator has implemented Cisco IM and Presence for the
company. An email was sent to all employees requesting that they document any malfunctioning.
Employees must navigate to which Cisco Jabber for Windows menu to report functionality issues?
Antworten
-
A. Options
-
B. Show docked window
-
C. Report a problem
-
D. Show connection status
-
E. Show error notifications
Frage 58
Frage
58.An engineer is configuring the Cisco Unified Communications Manager disaster recovery system.
Which two statements about the disaster recovery system are true? (Choose two.)
Antworten
-
A. It requires the use of schedules for backups.
-
B. Backup files are encrypted using the cluster security password.
-
C. If the backup device is listed in a backup schedule, it cannot be manually deleted.
-
D. If the backup does not complete within 40 hours, the backup times out.
-
E. Archiving backups to tape drives is supported.
Frage 59
Frage
59.Many users report that there is a delay in receiving MWI notifications for voicemails. Which two issues
can cause this problem? (Choose two.)
Antworten
-
A. The Connection Notifier service has been stopped.
-
B. Voicemail ports are not configured for MWI requests.
-
C. The MWI functionality for the port groups has been disabled.
-
D. Not enough MWI assigned ports are available.
-
E. MWIs are in the process of synchronizing with the phone system.
Frage 60
Frage
60.An end user is unable to sign into Jabber. Assuming that network connectivity has been verified, which
three settings for the end user should be checked? (Choose three.)
Antworten
-
A. Jabber Advanced Settings
-
B. Cisco Unified Communications Manager Service Profile
-
C. Cisco Unified Communications Manager User Management
-
D. Cisco Unified Presence Server Advanced Settings
-
E. Cisco Unified Presence Server Application Listener
-
F. Cisco Unified Presence Server System Topology
-
G. Jabber Version
Frage 61
Frage
61.An administrator wants to gauge the load and performance capacity of Cisco Unified Communication
Manager devices, including conference bridges, gateways, and trunks. Which report would the
administrator run?
Antworten
-
A. CAR
-
B. CDR
-
C. SIP
-
D. RTMT
-
E. CUBE
Frage 62
Frage
62.Which three tools are used to create phone user accounts in Cisco Unified Communications Manager
Express? (Choose three.)
Antworten
-
A. Cisco Configuration Professional
-
B. CPE
-
C. CLI
-
D. GUI
-
E. TUI
-
F. Cisco Security Device Manager
Frage 63
Frage
63.Why is quality of service critical to voice network traffic?
Antworten
-
A. Voice traffic is real-time network traffic.
-
B. Packets can be resent without affecting conversations.
-
C. Voice traffic is bursty in nature.
-
D. Voice traffic cannot be compressed.
Frage 64
Frage
64.A company has a 5-digit dial plan. A junior engineer inquires about the directory number external masks. Why are external masks used?
Antworten
-
A. to block calling number identification
-
B. to enable called number identification
-
C. to convert the calling directory number to the PSTN routable calling directory number
-
D. to associate a directory number with a SIP endpoint
Frage 65
Frage
65.To control telephony costs, management wants to restrict who can place long distance calls. Which
two options allow for this restriction? (Choose two.)
Antworten
-
A. calling search space
-
B. partitions
-
C. route groups
-
D. SIP trunk
-
E. gateway
Frage 66
Frage
66.Which type of template should be used when a network engineer adds a new call center agent in the
Cisco Unity Connection?
Antworten
-
A. Contact
-
B. Call handler
-
C. User
-
D. Notification
Frage 67
Frage
67.Which four tasks does RTMT allow an administrator to perform? (Choose four.)
Antworten
-
A. View syslog messages.
-
B. Generate alerts when threshold is below or above user-configured.
-
C. Monitor a set of predefined management objects that monitor the health of the system.
-
D. Collect information and traces about errors or alerts that exist in the RTMT.
-
E. Reboot the system.
-
F. Perform incremental backups.
-
G. Export CDR.
Frage 68
Frage
68.An engineer receives a report regarding choppy voice quality on a call. The user does not remember
the details of the call time or the numbers that were dialed. What should the engineer implement to assist
in identifying future issues?
Antworten
-
A. Cisco Quality Report Tool
-
B. Cisco Unified SRST
-
C. Cisco Unified RTMT
-
D. Cisco AXL
Frage 69
Frage
69.Two departments have their own call-park slot to park calls. Which feature on Cisco Unified CME allows one department to answer a call for another department?
Antworten
-
A. Call park
-
B. Call forward
-
C. Call transfer
-
D. Pickup-group
-
E. Barge-in
Frage 70
Frage
70.An entire department is reporting frequent calls with poor voice quality. Which fault domain should be
investigated first?
Antworten
-
A. IP phone
-
B. Cisco Unified Communications Manager Media Resources
-
C. Cisco Unified Communications Manager SIP Trunks
-
D. network routers and switches
Frage 71
Frage
71.The IP phone of user A is registered with Cisco Unified Communications Manager subscriber1 while
the IP phone of user B is registered with subscriber2. User A is speaking to user B on an active call. A
junior network engineer mistakenly reboots subscriber1.
What effect does this have on the call?
Antworten
-
A. User A can hear B, but B cannot hear A.
-
B. User A cannot hear B, but B can hear A.
-
C. This action drops the call.
-
D. This action does not affect the call.
-
E. The call remains active, but quality may suffer.
Frage 72
Frage
72.Which option would an administrator use to find all unassigned directory numbers in Cisco Unified
Communications Manager?
Antworten
-
A. Route plan report
-
B. CDR
-
C. CAR
-
D. Cisco Reporting Tool
-
E. Directory number lookup
Frage 73
Frage
73.Which three features of the Cisco Unified Attendant Console can a user use to streamline the
company telephony communications? (Choose three.)
Antworten
-
A. promotes a phone call into a video call
-
B. uses presence status to determine availability
-
C. reverts back to operator a transferred call
-
D. provides a conference call with up to 10 participants
-
E. provides call detail records reports to upper management
-
F. defines operator working hours and automatically redirect calls
Frage 74
Frage
74.Which Cisco Unified Communications Manager configuration causes an IP phone screen to
display a "registration rejected" message?
Antworten
-
A. Cisco Unified Communications Manager is unable to reach user IP phone.
-
B. Cisco Unified Communications Manager database replication status is 2.
-
C. Cisco Unified Communications Manager auto registration is disabled.
-
D. Cisco Unified Communications Manager is unable to allocate DN.
-
E. Cisco Unified Communications Manager subscriber is offline.
Frage 75
Frage
75.Refer to the exhibit.
Which method is using the users to access their mailboxes?
Antworten
-
A. web access
-
B. phone access
-
C. GUI access
-
D. VUI access
Frage 76
Frage
76.Which command is used to troubleshoot calls as they enter and leave a PRI connection?
Antworten
-
A. Debug isdn q 931
-
B. Show voice call summary
-
C. Debug voip dialpeer
-
D. Show dial-peer voice summary
Frage 77
Frage
77.Which three methods can remotely force a Cisco Unified Communications Manager Express phone to
reset? (Choose three.)
Antworten
-
A. Issue a shutdown, no shutdown command on a switch port that provides PoE to a Cisco phone.
-
B. Issue the restart command under the ephone-dn configuration of the phone.
-
C. Issue the reset command under the ephone configuration of the phone.
-
D. Issue the reset command under the ephone-dn configuration of the phone.
-
E. Issue the reset H.H.H (mac-address) command telephony-service configuration.
-
F. Issue the reset H.H.H (mac-address) command under global configuration.
Frage 78
Frage
78.A user wants their name to show on their phone instead of their directory number. Which configuration
item allows an administrator to do this?
Antworten
-
A. Line Text Label
-
B. Alerting Name
-
C. External Phone Number Mask
-
D. Caller Name
-
E. Description
Frage 79
Frage
79.Which component is needed for a voice call to be processed between the enterprise Cisco
Unified Communications system and a cell phone via the PSTN?
Antworten
-
A. Cisco Analog Voice Gateway VG224
-
B. Cisco Unified Communications Manager call processing node
-
C. Cisco Unified Communications Manager Music On Hold node
-
D. Cisco Integrated Service Router with digital signal processor resources
Frage 80
Frage
80.In which section of Cisco Unified Communications Manager are Call Detail Records viewed?
Antworten
-
A. Cisco Unified Serviceability
-
B. Cisco Unified OS Administration
-
C. Cisco Unified Reporting
-
D. Cisco Unified Communications Manager Administration
-
E. Cisco Unified Disaster Recovery
Frage 81
Frage
81.Use the exhibits below to answer the question.
Refer to the exhibits
Which configuration option, in the device configuration page, will allow an administrator to assign a device
to a group of like devices?
Antworten
-
A. Media Resource Group List
-
B. Device Pool
-
C. Location
-
D. AAR Calling Search Space
-
E. Calling Search Space
Frage 82
Frage
82.Users report volume issues with recordings in Cisco Unity Connection. Which feature can be disabled
to prohibit automatic volume adjustments to recordings?
Antworten
-
A. AGC
-
B. Noise Reduction
-
C. Audio Normalization
-
D. VAD
Frage 83
Frage
83.After getting reports that users cannot make calls out to the PSTN, a network administrator opens the
Cisco Unified Communications Manager Administration web page and begins to review route patterns.
Why would the administrator look here when troubleshooting PSTN connectivity troubles?
Antworten
-
A. A route pattern contains a list of gateways that can reach the PSTN.
-
B. A route pattern contains dial plan information for calling the PSTN.
-
C. A route pattern contains the necessary privileges for calling the PSTN.
-
D. A route pattern contains a list of SIP trunks that can reach the PSTN.
Frage 84
Frage
84.A group of managers for a company has requested IP telephony reports with performance data and
graphs. Which steps should the network administrator take to gather these reports using Cisco Unified
Communications Manager web interface?
Antworten
-
A. Select Cisco Unified Serviceability > Trace > Serviceability Reports Archives.
-
B. Select Cisco Unified Serviceability > Alarm > Serviceability Reports Archives.
-
C. Select Cisco Unified Reports > Tools > Serviceability Reports Archives.
-
D. Select Cisco Unified Reports > Trace > Serviceability Reports Archives.
-
E. Select Cisco Unified Serviceability > Tools > Serviceability Reports Archives.
Frage 85
Frage
85.Which menu option should be selected to add a desk phone as an endpoint in Cisco Unified
Communications Manager?
Antworten
-
A. Application
-
B. Device
-
C. System
-
D. User management
-
E. Media devices
Frage 86
Frage
86.A user wants their name to show on their phone instead of their directory number. Which configuration item allows an administrator to do this?
Antworten
-
A. Line Text Label
-
B. Alerting Name
-
C. External Phone Number Mask
-
D. Caller Name
-
E. Description
Frage 87
Frage
87.Where can an engineer find how many unused Cisco Unified Workspace Licensing Standard licenses
remain?
Antworten
-
A. CAR
-
B. Cisco Unified Reporting
-
C. Cisco Unified Communications Enterprise License Manager
-
D. RTMT
Frage 88
Frage
88.A company wants to deploy IP telephony on its network. The engineer has to allow the existing
switches to support Cisco IP phones that are connected to a Cisco Unified Communications Manager
server. Which command should be configured on the switches to allow voice traffic on VLAN 50?
Antworten
-
A. switchport access vlan 50
-
B. switchport mode access
-
C. switchport mode trunk
-
D. switchport voice vlan 50
Frage 89
Frage
89.A user reports that several IP phones in a single department are displaying a continuous "registering"
message. Which fault domain should be investigated?
Antworten
-
A. network router
-
B. Cisco Unified Communications Manager subscriber node
-
C. network switch
-
D. IP phones
-
E. SIP gateway
Frage 90
Frage
90.An IP phone that is using PoE shows "unknown" in Cisco Unified Communications Manager. What
should the engineer do to restore the phone to service?
Antworten
-
A. restart the phone from Cisco Unified Communications Manager
-
B. reset the phone from Cisco Unified Communications Manager
-
C. enter **# locally on the IP phone
-
D. check the network cable and switch port
Frage 91
Frage
91.A voice engineer wants to monitor system activities using the RTMT tool.
Which step is next after navigating to Cisco Unified Reporting?
Antworten
-
A. system > scheduler > CDR
-
B. system reports > unified CM data summary > generate report
-
C. system > tools > reports
-
D. tools > CDR analysis and reporting
Frage 92
Frage
92.When you attempt to add a phone to the Cisco Unified Communications Manager Express using the
GUI interface, the error "No New Phone to Add" appears. Which command is causing the error?
Antworten
-
A. No auto-reg-ephone
-
B. No service ephone-reg
-
C. SIP-ua no auto-reg-ephone
-
D. stcapp ccm-group 1
Frage 93
Frage
93.An engineer is configuring a group of DNs and wants the external phone number mask to match the
last four digits of the DN. Which option should be used?
Antworten
-
A. 123555xxxx
-
B. 123555XXXX
-
C. 123555****
-
D. 123555....
Frage 94
Frage
94.User A notices echo on a call with user B. Both users are using Cisco VoIP phones. User B is using a
headset, and user A is using a handset. What is the most likely source of the echo?
Antworten
-
A. user A handset
-
B. user B headset
-
C. disabled echo cancellation on user A phone profile
-
D. disabled echo cancellation on user B phone profile
Frage 95
Frage
95.Which command allows the telephony service of a Cisco Unified Communications Manager Express
router to be associated to loopback address 192.168.143.44?
Antworten
-
A. !telephony-servicemax-ephones 4max-dn 8ip source-address 192.168.143.44!
-
B. !telephony-servicemax-ephones 4max-dn 8ip bind src-addr 192.168.143.44!
-
C. !telephony-servicemax-ephones 4max-dn 8source-address ipv4:192.168.143.44!
-
D. !telephony-servicemax-ephones 4max-dn 8ip address 192.168.143.44!
Frage 96
Frage
96.Which three choices are functions or features of Cisco Unity Connection? (Choose three.)
Antworten
-
A. video-enabled messaging through converged networks
-
B. text-to-speech, which allows access to Exchange emails from a telephone
-
C. voice-enabled message navigation
-
D. voice-enabled dialing to external users
-
E. automated attendant capabilities
-
F. automated call rerouting to agents through round robin, longest idle, or broadcast
Frage 97
Frage
97.Client A in X site uses an IP phone to call client B in Y site. Engineers have selected SCCP as the
default VoIP signaling protocol. Which network path will the call signaling take when client A calls client B?
Antworten
-
A. IP phone X > CUCM subscriber > IP phone Y using TCP port 1000
-
B. IP phone X > CUCM subscriber > IP phone Y using TCP port 2000
-
C. IP phone X > CUCM subscriber > IP phone Y using UDP port 1000
-
D. IP phone X > IP phone Y using TCP port 2000
-
E. IP phone X > IP phone Y using TCP port 1000
Frage 98
Frage
98.Which option in RTMT would be used to monitor connections using Cisco Unity Connection?
Antworten
-
A. Port Monitor
-
B. Called Party Tracing
-
C. System Summary
-
D. Trace and Log Central
Frage 99
Frage
99.A voice engineer configured a Cisco Unified Presence client for a new employee. The CSF device and
user are associated, but the end user cannot make a call using Cisco Unified Personal Communicator
softphone mode. Which configuration item should be checked next to identify the issue?
Antworten
-
A. Client service framework
-
B. Common device configuration
-
C. Calling search space
-
D. Route pattern
Frage 100
Frage
100.What is needed to support SIP Early Media?
Antworten
-
A. Media Termination Point
-
B. Transcoder
-
C. Annunciator
-
D. Conference Bridge
-
E. DSP
-
F. Route List
Frage 101
Frage
101.Use the router console to view the configuration and answer the question.
Calls to National numbers are failing. Using the Branch router configuration, correctly determine why these calls are not successful
Antworten
-
A. The port assignment should be 0/0/0:12
-
B. The destination pattern should be 90[1-9]T
-
C. The character "T" cannot be used in a Pots dial pattern
-
D. The digit prefix should be "00"
Frage 102
Frage
102.A technician is preparing to activate the needed services in Cisco Unified Communications Manager to integrate with an IM and Presence server. Which four services must be enabled? (Choose four.)
Antworten
-
A. Cisco TFTP
-
B. Cisco AXL Web Service
-
C. Cisco CTI Manager
-
D. Cisco Messaging Interface
-
E. Cisco Intercluster Lookup Service
-
F. Cisco Extended Functions
-
G. Cisco Unified Communications Manager
-
H. Cisco Directory Sync
Frage 103
Frage
103.An administrator wants to add and configure an ephone-dn via the Cisco Unified Communications Manager Express web GUI. Which feature must be defined under telephony service configuration?
Antworten
-
A. auto-reg-ephone
-
B. auto-reg-dn
-
C. max-ephones
-
D. max-dn
-
E. dn-webedit
Frage 104
Frage
104.An engineer must configure QoS for a VoIP network. Which option is the best QoS model for this task?
Antworten
-
A. IntServ
-
B. DiffServ
-
C. MPLS
-
D. FIFO
Frage 105
Frage
105.For capacity planning purposes, a network administrator must provide a report to management that displays the number of phones registered per server. Where can the administrator obtain this information?
Antworten
-
A. Navigate to Cisco Unified Serviceability > Tools > Serviceability Reports Archive.
-
B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports.
-
C. Navigate to Cisco Unified CM Administration > Tools > System Reports.
-
D. Navigate to Cisco Unified Reporting > Tools > System Reports.
Frage 106
Frage
106.A technician is checking services in response to the recent failed delivery of all voicemails. Which service must be running for message delivery to function properly?
Antworten
-
A. Connection DB Event Publisher
-
B. Connection Database Proxy
-
C. Connection Notifier
-
D. Connection Message Transfer Agent
Frage 107
Frage
107.Customer requirements dictate that local calls from area code 408 display the ANI as a 7digit number. Which procedure allows the leading digits to be stripped as soon as they arrive at the H.323 voice gateway?
Antworten
-
A. Set up a voice translation rule, apply the translation rule to a translation profile, and apply the translation profile to the dial peer in the inbound direction.
-
B. Set up a voice translation profile, apply the translation profile to a translation rule, and apply the translation rule to the dial peer in the outbound direction.
-
C. Set up a voice translation rule, apply the translation rule to a translation profile, and apply the translation profile to the dial peer in the outbound direction.
-
D. Set up a voice translation profile, apply the translation profile to a translation rule, and apply the translation rule to the dial peer in the inbound direction.
Frage 108
Frage
108.Which two user types are valid when a user is created in Cisco Unified Communications Manager? (Choose two.)
Antworten
-
A. local end user
-
B. LDAP synchronized end user
-
C. UDS end user
-
D. EDI end user
-
E. BDI end user
Frage 109
Frage
109.A new user has successfully registered Cisco Jabber. Which option verifies that the Jabber client is connected to all appropriate back-end systems?
Antworten
-
A. Show Connection Status
-
B. Report A Problem
-
C. Advanced Settings
-
D. About Jabber
-
E. Reset Jabbe
Frage 110
Frage
110.An engineer has deployed IM-user-only mode for the IM and Presence Service. Which two features will be available? (Choose two.)
Antworten
-
A. third-party XMPP clients are not supported
-
B. IM and Presence support without Cisco Unified Communications Manager
-
C. audio/video calling
-
D. Cisco Unity voicemail retrieval via SMTP
-
E. XMPP federation capabilities
Frage 111
Frage
111.An administrator has determined that an end user is experiencing jitter. Which symptom is the end user experiencing?
Antworten
-
A. choppy
-
B. crosstalk
-
C. static
-
D. screeching
Frage 112
Frage
112.Use the router console to view the configuration and answer the question.
International calls are also failing. Using the router configuration supplied, why are international calls failing?
Antworten
-
A. Prefix should be 00
-
B. The character "T" cannot be used in a Pots dial pattern
-
C. The port should be 0/0/0:12
-
D. The destination pattern is missing a "0"
Frage 113
Frage
113.Which type of signaling does desktop control mode use to control a desk phone?
Antworten
-
A. CTIQBE
-
B. SIP
-
C. XMPP
-
D. SCCP
Frage 114
Frage
114.Which four devices can be used to provide analog ports, traditional phones, and fax machines? (Choose four.)
Antworten
-
A. Cisco VG224 Analog Voice Gateway
-
B. Foreign Exchange Station Voice Interface Card
-
C. Cisco High Density VoiceFax Network Module
-
D. Cisco ATA190 Analog Telephone Adapter
-
E. Cisco VG350 Analog Voice Gateway
-
F. Cisco Unified Border Element
-
G. Foreign Exchange Office Voice Interface
Frage 115
Frage
115.Which client supports Cisco Unified Presence?
Antworten
-
A. Jabber
-
B. Lync
-
C. Skype
-
D. Quip
Frage 116
Frage
116.A network engineer receives a report about poor quality on an active call between the IP phone of user A over the WAN to the IP phone of user B. Using web access to the phone, the network engineer remotely checks call statistics such as jitter, network delay, and packet loss. Calculated packet loss is 3%, average jitter is 20 ms, network delay is 1 ms, and conceal seconds is 7. What is the most likely problem with this call?
Antworten
-
A. Calculated packet loss is too high.
-
B. Average jitter is too high.
-
C. Network delay is too high.
-
D. Conceal seconds are too high.
Frage 117
Frage
117.Which options are two on-premise components of Cisco Unified Presence? (Choose two.)
Antworten
-
A. Cisco Unified Communication Manager
-
B. Cisco Unified Contact Center Express
-
C. Cisco WebEx
-
D. Cisco Quality Management
-
E. Cisco Unified Contact Center Enterprise
Frage 118
Frage
118.An engineer is syncing Cisco Unity Connection with LDAP. Which two things should the engineer consider during this process? (Choose two.)
Antworten
-
A. PINs and passwords are replicated from the LDAP database to Cisco Unity Connection database.
-
B. LDAP authentication must be configured and enabled.
-
C. There is no limit to the amount of LDAP filters that can be created.
-
D. SSL certificates from LDAP must be uploaded to Cisco Unity Connection.
-
E. LDAP synchronization must be configured and enabled.
Frage 119
Frage
119.In an effort to proactively manage IP telephony infrastructure, a network engineer wants to review usage reports that provide top five users, top five calls, and traffic summary. Which option describes where this information can be retrieved using Cisco Unified Communications Manager?
Antworten
-
A. Navigate to Cisco Unified CM Administration > CDR Analysis and Reporting >System Reports > System Overview > Select desired reports.
-
B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports > System Overview > Select desired reports.
-
C. Navigate to Cisco Unified Serviceability > Tools > CDR Analysis and Reporting > System Reports > System Overview > Select desired reports.
-
D. Navigate to Cisco Unified Reporting > Tools > System Reports > System Overview > Select desired reports.
Frage 120
Frage
120.Which two profile types are needed to enable a user for IM and Presence? (Choose two.)
Antworten
-
A. Cisco Unified Communications Service
-
B. voicemail profile
-
C. Jabber profile
-
D. device profile
-
E. network access profile
-
F. service profile
Frage 121
Frage
121.An end user reports that conference calls are failing. Which fault domain should be investigated first?
Antworten
-
A. IP phone
-
B. Cisco Unified Communications Manager Media Resources
-
C. voice gateways
-
D. network routers and switches
Frage 122
Frage
122.Which menu does a voice engineer use to create a phone user account in the Cisco Unified CME GUI?
Antworten
-
A. Configure
-
B. Voicemail
-
C. Administration
-
D. Reports
Frage 123
Frage
123.An engineer is syncing Cisco Unity Connection with LDAP. Which three things should the engineer consider during this process? (Choose three.)
Antworten
-
A. PINs and passwords are replicated from the LDAP database to Cisco Unity Connection database.
-
B. LDAP authentication must be configured and enabled.
-
C. There is no limit to the amount of LDAP filters that can be created.
-
D. SSL certificates from LDAP must be uploaded to Cisco Unity Connection.
-
E. LDAP synchronization must be configured and enabled.
-
F. Cisco Unity Connection supports integrations with OpenLDAP.
Frage 124
Frage
124.Which transport layer protocol is used when a Cisco Unified Presence client is searching for a contact in directory?
Antworten
-
A. TCP
-
B. UDP
-
C. IMAP
-
D. HTTP
Frage 125
Frage
125.Which utility is recommended for a network administrator who must provision 300 users in Cisco Unified Communications Manager?
Antworten
-
A. Batch Accounts Tool
-
B. Bulk Administration Tool
-
C. Bulk Accounts Tool
-
D. Batch Administration Tool
Frage 126
Frage
126.How many servers can be supported in a Cisco Unified Presence Server cluster environment?
Antworten
-
A. 2
-
B. 4
-
C. 6
-
D. 8
-
E. 10
Frage 127
Frage
127.Which port is the default port for SCCP call signaling on Cisco Unified Communications Manager?
Antworten
-
A. 2000
-
B. 2443
-
C. 5060
-
D. 5061
Frage 128
Frage
128.Which protocol is used to monitor active voice call quality?
Antworten
-
A. RTCP
-
B. RTP
-
C. QoS
-
D. STP
-
E. SDP
Frage 129
Frage
129.Which two options are available when adding a user to Call Unity Express? (Choose two.)
Antworten
-
A. GUI
-
B. CLI
-
C. BAT
-
D. TAPS
-
E. LDAP
Frage 130
Frage
130.Which navigation pane should be selected to view the CDR statistics?
Antworten
-
A. Cisco Unified Serviceability
-
B. Cisco Unified CM Administration
-
C. Cisco Unified Reporting
-
D. Cisco Unified OS Administration
Frage 131
Frage
131.A Cisco Unified Communications administrator wants to implement Cisco IM and Presence for the company. If it is installed in IM-only user mode, which three services are supported for users? (Choose three.)
Antworten
-
A. video calls support
-
B. third-party XMPP client support
-
C. presence support
-
D. Microsoft Lync support
-
E. Microsoft Office Communicator support
-
F. instant messaging support
Frage 132
Frage
132.Which configuration causes PSTN users to experience a fail tone for every other call when trying to
reach a particular number on Cisco Unified CME?
Antworten
-
A. ephone-dn is not assigned to the ephone.
-
B. Duplicate ephone-dn is not assigned to the ephone.
-
C. ephone is not registered.
-
D. ephone does not exist for the ephone-dn.
Frage 133
Frage
133.Which option allows an engineer to deploy new firmware to a single phone, while reducing possible
impact?
Antworten
-
A. Define a new firmware load on specific device. Save configuration and reset individual device.
-
B. Define load in device defaults. Reset Device Pool.
-
C. Upload firmware to TFTP server. Restart TFTP service.
-
D. Enable Peer Firmware Sharing.
Frage 134
Frage
134.Which two benefits does Cisco Unified IM and Presence Service bring to businesses? (Choose two.)
Antworten
-
A. enhances productivity by using availability awareness and reduce communications delays
-
B. provides Enterprise IM capabilities, such as persistent chat, group chat, and IM history
-
C. provides and streamlines enterprise audio and video communications
-
D. enhances communications by providing multipoint conference capabilities
-
E. supports standard-based XMPP clients by supporting native SIP/SIMPLE and H.323 protocols
Frage 135
Frage
135.An engineer is configuring the Cisco Unified Communications Manager disaster recovery system.
Which three statements about the disaster recovery system are true? (Choose three.)
Antworten
-
A. It requires the use of schedules for backups.
-
B. Backup files are encrypted using the cluster security password.
-
C. If the backup device is listed in a backup schedule, it cannot be manually deleted.
-
D. If the backup does not complete within 40 hours, the backup times out.
-
E. Archiving backups to tape drives is supported.
-
F. SSL is used between the master and local agents.
Frage 136
Frage
136.Which two components are needed before a user can be assigned to a Presence node? (Choose
two.)
Antworten
-
A. Cisco Unified Communications Service
-
B. service profile
-
C. phone button template
-
D. mobility profile
-
E. device profile
Frage 137
Frage
137.A user would like all calls to be forwarded to voice mail. The user's phone is not set up with a soft key
for this feature. Which option accomplishes this configuration from within the Cisco Unified
Communication Administrator Directory Number configuration page?
Antworten
-
A. Call Forward and Pickup Settings > Forward No Coverage External > Select voice mail check box
-
B. Call Forward and Pickup Settings > Forward Busy External > Select voice mail check box
-
C. Call Forward and Pickup Settings > Forward All > Select voice mail check box
-
D. Call Forward and Pickup Settings > Forward Unregistered External > Select voice mail check box
Frage 138
Frage
138.A user reports that when they receive a voicemail on their phone, they do not receive it in their email
as well. Which feature on Cisco Unity Connection should be checked?
Antworten
-
A. Cisco Unified Messaging Service
-
B. Enterprise Parameters
-
C. Roles
-
D. Message Waiting Indicators
-
E. Alternate MWI
Frage 139
Frage
139.An engineer is using Cisco Jabber. Instant messages are transported through which protocol?
Antworten
-
A. SIP
-
B. XMPP
-
C. H.323
-
D. SCCP
Frage 140
Frage
140.Which menu should be used to create a username and password in the Cisco Unified CME GUI?
Antworten
-
A. configure > pilot number
-
B. configure > extension
-
C. configure > phones
-
D. configure > system parameters
Frage 141
Frage
141.Which IM and Presence chat feature allows for an always-available chat room that remains active,
even if all of the participants leave the chat?
Antworten
-
A. Personal
-
B. Group
-
C. Persistent
-
D. Ad-hoc
Frage 142
Frage
142.A single user receives a high amount of inbound voice messages and checks them only via email.
The user cannot receive or send messages as the mailbox is full. Which option provides a permanent
solution to this problem?
Antworten
-
A. message aging policies
-
B. mailbox size quota
-
C. multiple mailbox stores
-
D. call-routing rules
-
E. restriction tables
Frage 143
Antworten
-
Drag
-
Drop
Frage 144
Frage
144.Which three methods can an engineer use to create users in Cisco Unity Connection? (Choose
three.)
Antworten
-
A. Local
-
B. Cisco Unified Presence Server
-
C. Cisco Unified Communications Manager
-
D. LDAP
-
E. TMS
-
F. Outlook
Frage 145
Frage
145.An engineer receives a report that Cisco Unified Communications Manager is not responding. The
engineer needs to use RTMT to check errors. Which menu path should the engineer follow to install
RTMT?
Antworten
-
A. System Settings > Plugins > RTMT
-
B. Unified Communications Serviceability > Downloads > RTMT
-
C. Application > Plugins > RTMT
-
D. System > Plugins > RTMT
Frage 146
Frage
146.Which profile must be added to the end user profile when enabling an end user for Cisco Unified
Presence?
Antworten
-
A. Device profile
-
B. UC service profile
-
C. Extension mobility profile
-
D. SIP profile
Frage 147
Frage
147.A user registered to Cisco Unified Communications Manager wants their cell phone to ring
simultaneously with the IP phone. Which three configuration points must be configured to achieve this
configuration? (Choose three.)
Antworten
-
A. Enable Mobile Voice Access.
-
B. Create Remote Destination Profile.
-
C. Create Remote Destination.
-
D. Enable Single Number Reach.
-
E. Create Application Dial Rule.
-
F. Enable Call Forwarding.
Frage 148
Frage
148.Which three network elements are crucial when deploying VoIP devices? (Choose three.)
Antworten
-
A. Round-trip time
-
B. QoS markings
-
C. Bandwidth
-
D. Ethernet
-
E. Fibre
-
F. Token ring
Frage 149
Frage
149.Which two options are configured on the directory number configuration page within Cisco Unified
Communications Manager Administrator? (Choose two.)
Antworten
-
A. partition
-
B. MAC address
-
C. auto answer
-
D. softkey template
-
E. common device configuration
-
F. max calls
Frage 150
Frage
150.CDR/CMR Reporting is being enabled on Cisco Unified Communications Manager. As part of this
process, which two service parameters must be activated? (Choose two.)
Antworten
-
A. Cisco CAR Web Service
-
B. CDR Enabled Flag
-
C. Cisco Serviceability Reporter
-
D. Call Diagnostics Enabled
-
E. Statistics Enabled
Frage 151
Frage
151.An engineer receives an isolated report that the customer can make calls successfully from an IP
phone to other IP phones, but receives an error recording when attempting to call someone over the
PSTN. The user cannot recall the error recording to provide the specific error message. Which two steps
should the network engineer take to begin troubleshooting? (Choose two.)
Antworten
-
A. Enable debug isdn q931 on the gateway and have user make the same call from the IP phone to PSTN again.
-
B. Check the region used by the IP phone in Cisco Unified Communications Manager.
-
C. Test the call using Dialed Number Analyzer in Cisco Unified Communications Manager administrator.
-
D. Check the calling search space used by the line on the IP phone in Cisco Unified Communications Manager.
-
E. Check the gateway to determine which codec is being used by the appropriate dial peer.
Frage 152
Frage
152.Which two options are configured on the phone configuration page within Cisco Unified
Communications Manager Administrator? (Choose two.)
Antworten
-
A. device pool
-
B. auto answer
-
C. partition
-
D. voice-mail profile
-
E. MAC address
Frage 153
Frage
153.Which Cisco Unity Connection user field is used to map to an LDAP directory?
Antworten
-
A. SMTP Address
-
B. Last Name
-
C. Alias
-
D. Display Name
Frage 154
Frage
154.A networking administrator needs to add a new user in Cisco Unified Communications Manager.
Where must the administrator navigate to accomplish this task?
Antworten
-
A. Device Association
-
B. User Management
-
C. Application
-
D. Application User
Frage 155
Frage
155.The receptionist has a Cisco 7965 phone with 24-button side-car configuration. The sidecar button of
the phone does not light up when the line is in use. Which phone configuration is missing?
Antworten
-
A. Subscriber calling search space
-
B. Location
-
C. BLF audible alert setting
-
D. Phone button template
Frage 156
Frage
156.Which component is needed to facilitate the connection between Cisco Unified Communications
Manager and Cisco Unified Presence Server?
Antworten
-
A. SIP trunk
-
B. H.323 gateway
-
C. Gatekeeper
-
D. MGCP gateway
-
E. Cisco Unified Border Element
Möchten Sie mit GoConqr kostenlos Ihre eigenen Quiz erstellen? eigenen Mehr erfahren.