Frage 1
Frage
What is a measure of the antenna’s focus.
Antworten
-
beamwidth
-
frequency
-
cycle
-
wave
Frage 2
Frage
Number of times a signal completes a cycle 1 second.
Antworten
-
frequency
-
cycle
-
rotation
-
rate
Frage 3
Frage
A signal rising from the center line, falls through the center line, and rises again to meet the center line.
Antworten
-
rate
-
cycle
-
frequency
-
amplitude
Frage 4
Frage
The most commonly used frequency unit and is nothing other than one cycle per second.
Antworten
-
miliwatts
-
hertz
-
decibel
-
volts
Frage 5
Frage
What two main frequency ranges used for wireless LAN communication
Antworten
-
5 GHz
-
2.4 MHz
-
2.4 GHz
-
4.0 MHz
Frage 6
Frage
Technique which uses specific numbers and is assigned to a specific frequency.
Antworten
-
channel
-
wave
-
scheme
-
frequency
Frage 7
Frage
The frequency range needed to transmit a signal, used by a single channel or a single RF signal.
Antworten
-
electric band
-
bandwidth
-
amplitude
-
phase
Frage 8
Frage
The signal is a measure of shift in time relative to the start of a cycle. Phase is normally measured in degrees, where 0 degrees is at the start of a cycle, and one complete cycle equals 360 degrees.
Antworten
-
Phase
-
Wave
-
Frequency
-
amplitude
Frage 9
Frage
A measure of physical distance that a wave travels over one complete cycle.
Antworten
-
phase
-
bandwidth
-
wavelength
-
frequency
Frage 10
Frage
The height from the top peak to the bottom peak of the signal’s waveform,
Antworten
-
phase
-
wavelength
-
Frequency
-
Amplitude
Frage 11
Frage
The strength of an RF signal is usually measured by its power, in ________.
Antworten
-
Volts
-
Amps
-
wavelength
-
Watts
Frage 12
Frage 13
Frage 14
Frage
In a BSS, if you disable lower data rates
Frage 15
Frage
To provide robust wireless coverage to an ever-increasing area, you should:
Frage 16
Frage
The process of moving an association from one AP to the next, so that the wireless connection is maintained as the client moves.
Antworten
-
FlexConnect
-
Roaming
-
Uplink
-
BSS
Frage 17
Frage
You should lay the cells out, which the pattern is seamless, leaving no holes in coverage.
Frage 18
Frage
Alternating channels to avoid overlap is commonly
Antworten
-
Channel Reuse
-
Honeycomb
-
Three-dimension space
-
Flow Pattern
Frage 19
Frage
Needed to automatically determine the location of wireless devices.
Antworten
-
real-time location services (RTLS)
-
modulation and coding (MCS)
-
Radio Resource Meter (RRM)
-
Dynamic Channel Allocation (DCA)
Frage 20
Frage
Site survey tools can be grouped into three basic categories based on their installation base:
Antworten
-
Standalone
-
Open-Standard
-
Server-based
-
Cloud-based
Frage 21
Frage
Three basic types of site survey that you can perform as you plan and deploy a wireless network:
Antworten
-
Predictive survey
-
Passive survey
-
Active survey
-
Standalone
Frage 22
Frage
Analyze the environment to select AP locations when no APs have been deployed yet;
Antworten
-
Predictive survey
-
MCS
-
Honeycomb
-
Passive survey
Frage 23
Frage
What tool to detect and identify any sources of interference you might encounter in the wireless coverage area.
Antworten
-
spectrum analyzer
-
Mapping Tool
-
Fluke Networks
-
RRM
Frage 24
Frage
Which tools perform predictive site survey:
Frage 25
Frage
To measure the effects of any existing APs in an area,
Antworten
-
Passive
-
Active
-
Spectrum Analyzer
-
RRM
Frage 26
Frage
AP is self-contained; it is equipped with both wired and wireless hardware so that the wireless client associations can be terminated onto a wired connection locally at the AP.
Antworten
-
Autonomous AP
-
FlexConnect
-
LAP
-
Converge Network
Frage 27
Frage
To help manage more and more autonomous APs as the wireless network grows, AP management function is pushed out of the enterprise and into the Internet cloud.
Antworten
-
Cloud-based Architecture
-
Autonomous
-
FlexConnect
-
Central APs
Frage 28
Frage
This logical plan used traffic used to control, configure, manage, and monitor the AP itself
Antworten
-
Control plane
-
Data plane
-
MCS
-
Central Routing
Frage 29
Frage
This logical plan used end-user traffic passing through the AP.
Antworten
-
Data Plane
-
ACI
-
Control Plane
-
Trunk
Frage 30
Frage
In a split-MAC Architectures which of the following are management functions:
Antworten
-
RF Management
-
MAC Management
-
Encryption
-
RF Transmit/Receive
Frage 31
Frage
In a split-MAC Architectures which of the following are management functions:
Antworten
-
Client Authentication
-
QOS
-
Security Management
-
MAC Management
Frage 32
Frage
LAP gets its name because the code image and the local intelligence are stripped down, or lightweight, compared to the traditional autonomous AP.
Frage 33
Frage
The management functions are usually performed on a access switch, Split-MAC Architectures
Frage 34
Frage
Tunneling protocol makes this all possible by encapsulating the data between the LAP and WLC within new IP packets.
Frage 35
Frage
Messages are authenticated, encrypted, and used for exchanges that are used to configure the LAP and manage its operation over port 5246.
Antworten
-
CAPWAP control messages
-
Roaming Control
-
CAPWAP data
-
Trunk
Frage 36
Frage
Every LAP and WLC must also authenticate each other with digital certificates. An X.509 certificate is preinstalled in each device when it is purchased.
Frage 37
Frage
What is a band and number of channels for 2.4 GHz range?
Antworten
-
4.075 - 4.875 and 1 thru 14
-
4.125 - 4.805 and 3 thru 14
-
2.412 - 2.484 and 1 thru 14
-
2.125 - 2.805 and 3 thru 14
Frage 38
Frage
The channel spacing is known as the
Antworten
-
channel separation
-
uplink
-
channel bandwidth
-
number of frequencies
Frage 39
Frage
According to power measurements, which are absolute powers
Antworten
-
watts
-
milliwatts
-
centimeters
-
amps
Frage 40
Frage
The decibel (db) is a handy function used logartihms to compare absolute measurement.