1772913
Description
Flashcards by mstokesteststudent, updated more than 1 year ago
|
Created by mstokesteststudent
almost 10 years ago
|
|
| Question | Answer |
| Q: Pine is a type of what? Hardwood, Softwood or Manmade Board | A: Softwood |
| Q: Oak is a type of what? Hardwood, Softwood or Manmade Board | A: Hardwood |
| Q: Plywood is a type of what? Hardwood, Softwood or Manmade Board | A: Manmade board |
| Q: What type of Glue do we use on wood? | A: PVA |
| Q: What is the difference between a Rule, and a Ruler? | A: A Rule starts at zero, so it can be used to measure depth. |
| Q: What type of mechanical fixing do we used to hold wood together while glue sets? | A: Nails or Panel Pins |
| Q: What is the name of the hammer with the pointy wedge end? | A: Cross Pein Hammer or Warrington Hammer |
| Q: What is the name of the hammer with the ball end? | A: Ball Pein Hammer |
| Q: What is the name of the tool used to remove nails? | A: Pincers |
| Q: Acrylic is a type of what plastic? Thermoplastic or Thermoset. | A: Thermoplastic, because it can be heated up and reshaped. |
| Q: A Forstener bit us used for what? | A: Drilling holes |
| Q: Acrylic can be cut with what types of saw? | A: Coping, Hacksaw and Junior Hacksaw |
| Q: Wood can be cut with what types of saw? | A: Tenon saw, Coping saw and a Fret saw |
| Q: What protective equipment should be worn when using the Disk Sander? | A: Apron and Goggles |
| Q: What protective equipment should be worn when using the Pillar Drill? | A: Apron and Goggles |
| Q: What protective equipment should be worn when using the Polishing Mop? | A: Apron and Goggles |
| Q: What is the white line for in the work shop? | A: To show that only one person should be at each machine, at any one time. |
| Q: What type of hole should you drill for a screw, if you want a tight fixing? | A: Pilot hole. |
| Q: What type of hole should you drill for a screw, if you want a loose fixing? | A: Clearance hole. |
| Q: What vice is best suited for holding wood? | A: Bench or Woodwork vice |
| Q: What vice is best suited for holding Acrylic? | A: Bench or Wood vice: The wooden jaws do not mark the plastic. |
| Q: After Draw filing Acrylic, what is the next process to finish off the surface? | A: Removing file marks with Wet and Dry paper. |
| Q: What is the final step of finishing off Acrylic, after you have finished Wet and Drying the surface? | A: Polishing; using the Polishing Mop |
Want to create your own Flashcards for free with GoConqr? Learn more.