CCNA Security Chapter 4 Exam

Question 1 of 23

1

Refer to the exhibit. If a hacker on the outside network sends an IP packet with source address 172.30.1.50, destination address 10.0.0.3, source port 23, and destination port 2447, what does the Cisco IOS firewall do with the packet?

Select one of the following:

The initial packet is dropped, but subsequent packets are forwarded
The packet is forwarded, and an alert is generated
The packet is forwarded, and no alert is generated
The packet is dropped

Explanation

Question 2 of 23

1

To facilitate the troubleshooting process, which inbound ICMP message should be permitted on an outside interface?

Select one of the following:

echo request
time-stamp request
echo reply
time-stamp reply
router advertisement

Explanation

Question 3 of 23

1

Which command is used to activate an IPv6 ACL named ENG_ACL on an interface so that the router filters traffic prior to accessing the routing table

Select one of the following:

ipv6 access-class ENG_ACL in
ipv6 traffic-filter ENG_ACL out
ipv6 traffic-filter ENG_ACL in
ipv6 access-class ENG_ACL out

Explanation

Question 4 of 23

1

Which statement describes a typical security policy for a DMZ firewall configuration

Select one of the following:

Traffic that originates from the inside interface is generally blocked entirely or very selectively permitted to the outside interface
Traffic that originates from the DMZ interface is selectively permitted to the outside interface
Traffic that originates from the outside interface is permitted to traverse the firewall to the inside interface with few or no restrictions
Return traffic from the inside that is associated with traffic originating from the outside is permitted to traverse from the inside interface to the outside interface
eturn traffic from the outside that is associated with traffic originating from the inside is permitted to traverse from the outside interface to the DMZ interface

Explanation

Question 5 of 23

1

Refer to the exhibit. Which statement describes the function of the ACEs

Select one of the following:

These ACEs allow for IPv6 neighbor discovery traffic
These ACEs automatically appear at the end of every IPv6 ACL to allow IPv6 routing to occur
These are optional ACEs that can be added to the end of an IPv6 ACL to allow ICMP messages that are defined in object groups named nd-na and nd-ns
These ACEs must be manually added to the end of every IPv6 ACL to allow IPv6 routing to occur

Explanation

Question 6 of 23

1

When an inbound Internet-traffic ACL is being implemented, what should be included to prevent the spoofing of internal networks

Select one of the following:

ACEs to prevent traffic from private address spaces
ACEs to prevent broadcast address traffic
ACEs to prevent ICMP traffic
ACEs to prevent HTTP traffic
ACEs to prevent SNMP traffic

Explanation

Question 7 of 23

1

In addition to the criteria used by extended ACLs, what conditions are used by a classic firewall to filter traffic

Select one of the following:

TCP/UDP source and destination port numbers
TCP/IP protocol numbers
IP source and destination addresses
application layer protocol session information

Explanation

Question 8 of 23

1

A router has been configured as a classic firewall and an inbound ACL applied to the external interface. Which action does the router take after inbound-to-outbound traffic is inspected and a new entry is created in the state table

Select one of the following:

When traffic returns from its destination, it is reinspected, and a new entry is added to the state table
The internal interface ACL is reconfigured to allow the host IP address access to the Internet
The entry remains in the state table after the session is terminated so that it can be reused by the host
A dynamic ACL entry is added to the external interface in the inbound direction

Explanation

Question 9 of 23

1

If the provided ACEs are in the same ACL, which ACE should be listed first in the ACL according to best practice

Select one of the following:

permit udp 172.16.0.0 0.0.255.255 host 172.16.1.5 eq snmptrap
deny udp any host 172.16.1.5 eq snmptrap
deny tcp any any eq telnet
permit ip any any
permit udp any any range 10000 20000
permit tcp 172.16.0.0 0.0.3.255 any established

Explanation

Question 10 of 23

1

A company is deploying a new network design in which the border router has three interfaces. Interface Serial0/0/0 connects to the ISP, GigabitEthernet0/0 connects to the DMZ, and GigabitEthernet/01 connects to the internal private network. Which type of traffic would receive the least amount of inspection (have the most freedom of travel)

Select one of the following:

traffic that is going from the private network to the DMZ
traffic that is returning from the DMZ after originating from the private network
traffic that originates from the public network and that is destined for the DMZ
traffic that is returning from the public network after originating from the private network

Explanation

Question 11 of 23

1

Refer to the exhibit. The ACL statement is the only one explicitly configured on the router. Based on this information, which two conclusions can be drawn regarding remote access network connections?(Choose two.)

Select one or more of the following:

SSH connections from the 192.168.2.0/24 network to the 192.168.1.0/24 network are allowed
Telnet connections from the 192.168.1.0/24 network to the 192.168.2.0/24 network are allowed
Telnet connections from the 192.168.1.0/24 network to the 192.168.2.0/24 network are blocked
SSH connections from the 192.168.1.0/24 network to the 192.168.2.0/24 network are allowed
SSH connections from the 192.168.1.0/24 network to the 192.168.2.0/24 network are blocked
Telnet connections from the 192.168.2.0/24 network to the 192.168.1.0/24 network are allowed

Explanation

Question 12 of 23

1

Consider the following access list.
access-list 100 permit ip host 192.168.10.1 any
access-list 100 deny icmp 192.168.10.0 0.0.0.255 any echo
access-list 100 permit ip any any
Which two actions are taken if the access list is placed inbound on a router Gigabit Ethernet port that has the IP address 192.168.10.254 assigned? (Choose two.)

Select one or more of the following:

Devices on the 192.168.10.0/24 network are not allowed to reply to any ping requests
A Telnet or SSH session is allowed from any device on the 192.168.10.0 into the router with this access list assigned
Only Layer 3 connections are allowed to be made from the router to any other network device
Devices on the 192.168.10.0/24 network can sucessfully ping devices on the 192.168.11.0 network
Only the network device assigned the IP address 192.168.10.1 is allowed to access the router

Explanation

Question 13 of 23

1

What is one benefit of using a stateful firewall instead of a proxy server

Select one of the following:

ability to perform user authentication
better performance
ability to perform packet filtering
prevention of Layer 7 attacks

Explanation

Question 14 of 23

1

What is one limitation of a stateful firewall

Select one of the following:

weak user authentication
cannot filter unnecessary traffic
not as effective with UDP- or ICMP-based traffic
poor log information

Explanation

Question 15 of 23

1

When a Cisco IOS Zone-Based Policy Firewall is being configured via CLI, which step must be taken after zones have been created

Select one of the following:

Assign interfaces to zones
Establish policies between zones
Identify subsets within zones
Design the physical infrastructure

Explanation

Question 16 of 23

1

A network administrator is implementing a Classic Firewall and a Zone-Based Firewall concurrently on a router. Which statement best describes this implementation

Select one of the following:

An interface must be assigned to a security zone before IP inspection can occur
Both models must be implemented on all interfaces
The two models cannot be implemented on a single interface
A Classic Firewall and Zone-Based Firewall cannot be used concurrently

Explanation

Question 17 of 23

1

Which two rules about interfaces are valid when implementing a Zone-Based Policy Firewall? (Choose two.)

Select one or more of the following:

If one interface is a zone member, but the other is not, all traffic will be passed.
If neither interface is a zone member, then the action is to pass traffic.
If both interfaces are members of the same zone, all traffic will be passed
If one interface is a zone member and a zone-pair exists, all traffic will be passed
If both interfaces belong to the same zone-pair and a policy exists, all traffic will be passed

Explanation

Question 18 of 23

1

Which command will verify a Zone-Based Policy Firewall configuration

Select one of the following:

show interfaces
show zones
show running-config
show protocols

Explanation

Question 19 of 23

1

Refer to the exhibit. The network “A” contains multiple corporate servers that are accessed by hosts from the Internet for information about the corporation. What term is used to describe the network marked as “A”?

Select one of the following:

internal network
untrusted network
perimeter security boundary
DMZ

Explanation

Question 20 of 23

1

Which type of packet is unable to be filtered by an outbound ACL

Select one of the following:

multicast packet
ICMP packet
broadcast packet
router-generated packet

Explanation

Question 21 of 23

1

When a Cisco IOS Zone-Based Policy Firewall is being configured, which two actions can be applied to a traffic class? (Choose two.)

Select one or more of the following:

drop
log
forward
hold
inspect
copy

Explanation

Question 22 of 23

1

Fill in the blank.
A ____ firewall monitors the state of connections as network traffic flows into and out of the organization.

Select one of the following:

stateful
nonstateful

Explanation

Question 23 of 23

1

Fill in the blank.
The ____ action in a Cisco IOS Zone-Based Policy Firewall is similar to a permit statement in an ACL.

Select one of the following:

pass
nonpass

	Created by d94829 d94829 over 6 years ago