David Nunez
Quiz by , created more than 1 year ago

abc

5
0
0
David Nunez
Created by David Nunez over 6 years ago
Close

UD4. L15-18 2015__1

Question 1 of 32

1

Q1. What is the main parameter to know the Mach Number?

Select one of the following:

  • Pressure

  • Temperature

  • Both are true.

  • Both are false.

Explanation

Question 2 of 32

1

Q2. What is a disadvantage of Thermistors?

Select one of the following:

  • Need electrical source.

  • Need pneumatic source.

  • Need hydraulic source.

  • All are false.

Explanation

Question 3 of 32

1

Q3. What is a direct reading thermometer?

Select one of the following:

  • Liquid expansion.

  • Vapor expansion.

  • Bi-metallic helix.

  • All of above are correct.

Explanation

Question 4 of 32

1

Q4. What is an advantage of Thermocouples?

Select one of the following:

  • a) No electrical source needed.

  • b) Temperature compensation to compensate cold junction variations.

  • c) Can measure higher temperatures.

  • d) a and c are correct.

Explanation

Question 5 of 32

1

Q5. What is the true option about optical pyrometer used by the Eurofighter?

Select one of the following:

  • The wavelength of radiation emitted by bodies is temperature dependant.

  • The wavelength of radiation emitted by bodies is pressure dependant.

  • The wavelength of radiation emitted by bodies is temperature independant.

  • None are true.

Explanation

Question 6 of 32

1

Q6. What is the function of the Drain Hole of the Pitot?

Select one of the following:

  • Allows any moisture to leak away without affecting sensing pressure.

  • Allows any moisture to leak away without affecting sensing temperature.

  • Allows any moisture to leak away affecting sensing pressure.

  • All are false.

Explanation

Question 7 of 32

1

Q7. What is VNE:

Select one of the following:

  • Never exceed speed.

  • Not exceed speed.

  • Non exceeding speed.

  • All are correct.

Explanation

Question 8 of 32

1

Q8. Where is the best place to put the pitot-static on an airplane?

Select one of the following:

  • In places where the attitude changes.

  • Behind the boundary layer.

  • In places where the attitude does not change much.

  • All are false.

Explanation

Question 9 of 32

1

1. About the IVSI (Instantaneous Vertical Speed Indicator), it’s important to know that:

Select one of the following:

  • It has a response to nose up and nose down respectively and it’s lag is huge.

  • It has a response to roll left and right and it’s lag is small.

  • It has a response to nose up and nose down respectively and isn’t lag is
    almost null.

  • Is not affected by G forces.

Explanation

Question 10 of 32

1

2. About the pressure transducer:

Select one of the following:

  • Is a tranlator of the pressure regulator.

  • It works as a conversor sensed pressure into an electrical signal.

  • It is not used in aviation.

  • Is the main part of an aircraft.

Explanation

Question 11 of 32

1

3. Before do a navigation, it’s important to know:

Select one of the following:

  • The direction of the travel.

  • The speed we’ll be traveling.

  • The distance and more.

  • All are correct.

Explanation

Question 12 of 32

1

4. About the magnetic field on Earth:

Select one of the following:

  • Is the same in all the seasons.

  • Is the same regardless the hour in a day.

  • Both are true

  • Both are false

Explanation

Question 13 of 32

1

5. What is a isoclinal line?

Select one of the following:

  • Line that join the points that have the same dip angle.

  • Line with the same magnetic field.

  • A correct, B false.

  • A false, B correct.

Explanation

Question 14 of 32

1

6. Rigidity is:

Select one of the following:

  • Resistant of a material to be broken.

  • Resistant of a material to be doubled.

  • Resistance of the spin axis to tilting.

  • Resistant to pitch up and down.

Explanation

Question 15 of 32

1

7. What precession is?

Select one of the following:

  • When a torque is applied along a direction perpendicular to the spin axis, the gyroscope will not tilt in the same direction of the torque.

  • When you apply a torque, the gyroscope moves to another place.

  • A is true, B false.

  • B is false, A true.

Explanation

Question 16 of 32

1

8. What is the Gyro Wander?

Select one of the following:

  • a) Is the deviation of the ADI.

  • b) There are some types: Real wander, Apparent wander, Transport wander,
    and Transport Grid wander.

  • c) Is the deviation of the spin axis from its set direction.

  • d) Both B and C are true.

Explanation

Question 17 of 32

1

Q1. What is a gyroscope?

Select one of the following:

  • A. Rigid body without motion in any plane

  • B. Rigid body with one principal moment of inertia much larger than the other two, in
    high spin around its axis of maximum inertia.

  • C. It's a device for measuring or maintaining orientation, based on the principle of
    preserving angular momentum

  • D. b) and c) are true

Explanation

Question 18 of 32

1

Q2. A gyroscope are driven by:

Select one of the following:

  • a) Air

  • b) Water

  • c) Electricity

  • d) a) and c) are true

Explanation

Question 19 of 32

1

Q3. A gyroscope which is N-S aligned

Select one of the following:

  • A. Over equator it drifts 15º per hour

  • B. Over north Pole it drifts 15º per hour

  • C. It never have drift effect

  • D. A gyroscope never can be N-S aligned

Explanation

Question 20 of 32

1

Q4. A gyro wander is a deviation of the spin axis from its set direction. Some real wander happen as a consequence of:

Select one of the following:

  • Bearing's friction

  • Angular accelerations

  • Undesired and aleatory

  • All are true

Explanation

Question 21 of 32

1

Q5. A heading indicator

Select one of the following:

  • It's manually aligned with the direct reading magnetic compass

  • It's north seeking

  • Has freedom in one plane

  • It isn't continuously adjusted

Explanation

Question 22 of 32

1

Q6. Radio Magnetic Indicator shows:

Select one of the following:

  • A. Magnetic heading

  • B. Magnetic bearing with respect to ground stations with radio navigation systems

  • C. Distance to ground stations

  • D. a) and b) are true

Explanation

Question 23 of 32

1

Q7. An artificial horizon

Select one of the following:

  • Has vertical spin axis Earth

  • Has three degrees of freedom

  • Indicates airplane attitude relative to pitch and roll axes

  • All are true

Explanation

Question 24 of 32

1

Q8. Artificial horizons which have air driven system suffer errors due to pendulosity of the system:

Select one of the following:

  • A. Acceleration errors

  • B. Turning errors

  • C. Both, a) and b) are true

  • D. Artificial horizons with air driven system don't suffer any error

Explanation

Question 25 of 32

1

Q1. Quality of information in Inertial Navigation Systems depends on:

Select one of the following:

  • A. Accuracy of the initial data.

  • B. Precision of the system alignment with true north.

  • C. None of the above is correct.

  • D. A and B are correct.

Explanation

Question 26 of 32

1

Q2. Inertial Navigation Systems can be classified in:

Select one of the following:

  • A. Inertial and Earth referenced INS.

  • B. Gimballed and Strapdown INS.

  • C. INS with fixes axis and INS referenced in the Earth.

  • D. None of the above is correct.

Explanation

Question 27 of 32

1

Q3.Some components in the INS are:

Select one of the following:

  • Inertial Navigation Unit.

  • Mode Selector Unit.

  • Control Display Unit.

  • All of the above are correct.

Explanation

Question 28 of 32

1

Q4. Force Balance Acelerometer is based on:

Select one of the following:

  • A. The angular displacement of a pendulum

  • B. The vertical displacement of a pendulum

  • C. The horizontal displacement of a pendulum

  • D. A and B are correct.

Explanation

Question 29 of 32

1

Q5. In the Gyro Stabilised Platform are used:

Select one of the following:

  • A. 2 gyros

  • B. 3 gyros

  • C. 4 gyros

  • D. It depends on the different platforms.

Explanation

Question 30 of 32

1

Q6. Some corrections in the Gyro Stabilised Platform is:

Select one of the following:

  • Gyro drift and topple due to apparent and transport wander.

  • Accelerations correction by Coriolis Force.

  • Centripetal acceleration.

  • All of the above are correct.

Explanation

Question 31 of 32

1

Q8. About FOG:

Select one of the following:

  • Are similar to RLG.

  • Are more expensive than RLG.

  • Vibrator is needed.

  • None of the above is correct

Explanation

Question 32 of 32

1

Q7. Some types of integrators are:

Select one of the following:

  • Analogic and digital.

  • Analogic and CC amplifiers.

  • CC amplifiers and AC generator-tacometers

  • All of above are correct.

Explanation