Pega CSSA 7.3/7.4 Simulado Academy

Question 1 of 104

1

You have a requirement to create an email correspondence that can be reused by other applications. In which two layers of the Enterprise Class Structure could you apply the email correspondence rule? (Choose Two)

Select one or more of the following:

Implementation
Framework
Division
Organization

Explanation

Question 2 of 104

1

Which layer of the Enterprise Class Structure contains assets that cannot be reused in other applications?

Select one of the following:

Implementation
Division
Framework
Organization

Explanation

Question 3 of 104

1

Which layer of the Enterprise Class Structure contains generalized assets that are then extended by specific implementations?

Select one of the following:

Division
Organization
Framework
Implementation

Explanation

Question 4 of 104

1

When creating a new ruleset version, what extra step must the system architect perform?

Select one of the following:

There are no extra steps if the ruleset version is up-to-date.
Rulesets cannot be versioned.
Lock the ruleset to prevent automatic versioning.
Change the decision table item numbers.

Explanation

Question 5 of 104

1

What is the importance of application versioning?

Select one of the following:

Application versioning provides a means to organize applications by priority.
Application versioning preserves prior application versions.
Application versioning provides the ability to version data classes without impacting existing data classes.
Application versioning provides the ability to clone rules.

Explanation

Question 6 of 104

1

What advantage does skimming provide over lock and roll as a versioning option?

Select one of the following:

Skimming saves checked out rules. Lock and roll does not save checked out rules.
Pega provides a skimming wizard but not a lock and roll wizard.
Skimming is most efficient for major and minor updates. Lock and roll is most useful for patches.
Skimming carries blocked rules forward. Lock and roll does not carry blocked rules forward.

Explanation

Question 7 of 104

1

A user is granted access to an application which lists HRApps:02-02 under Application rulesets. The ruleset contains rules in the versions below:

Select one of the following:

Rule_B, Rule_C, and Rule_D
All rules
Rule_B and Rule_C
Rule_D

Explanation

Question 8 of 104

1

Select two record types that are involved when configuring a production ruleset. (Choose Two)

Select one or more of the following:

Work group
Application
Operator
Organization
Access group

Explanation

Question 9 of 104

1

A claims framework contains two rulesets, ClaimsFW and ClaimsFWInt, and an application built on the framework contains two rulesets, Claims and ClaimsInt. Which statement is false if all the rulesets are configured as Application Validation?

Select one of the following:

Rules in ClaimsFWInt can reference rules in ClaimsFW
Rules in ClaimsInt can reference rules in Claims
Rules in ClaimsFW can reference rules in Claims
Rules in Claims can reference rules in ClaimsFW

Explanation

Question 10 of 104

1

A claims application contains two organizational and two application rulesets. The organizational rulesets MyCo and MyCoInt are configured as Ruleset Validation, where the prerequisite for MyCo is MyCoInt and the prerequisite for MyCoInt is Pega-ProcessCommander. The two application rulesets Claims and ClaimsInt are configured as Application Validation. Which of the following statements is false?

Select one of the following:

Rules in Claims can reference rules in MyCo
Rules in MyCo can reference rules in MyCoInt
Rules in ClaimsInt can reference rules in Claims
Rules in MyCo can reference rules in Claims

Explanation

Question 11 of 104

1

An application contains the following rulesets.

* AccountManagement contains the rules for administering checking and savings accounts.
* AccountManagementInt contains supporting rules for integrating with other applications.
* BankCorp contains rules shared across the entire organization.
* BankCorpInt contains supporting rules for integrations shared with other internal applications.
* CreditCheck contains rules for processing a credit check and is shared with another Pega application to administer loans.

Which two rulesets can be configured to use application validation, according to best practices? (Choose Two)

Select one or more of the following:

CreditCheck
AccountManagementInt
BankCorp
BankCorpInt
AccountManagement

Explanation

Question 12 of 104

1

Which two of the following prerequisites would you choose to create a branch rule for parallel development? (Choose Two)

Select one or more of the following:

Create a team application
Give team members access to the team application
Circumstance the original rule
Save a copy of the original rule into the base ruleset

Explanation

Question 13 of 104

1

A branch ruleset is a ruleset that ___________. (Choose Two)

Select one or more of the following:

prevents developers from seeing work of all team members
is designed for large projects
contains rules that are not in active development
is based off of another ruleset

Explanation

Question 14 of 104

1

Which two of the following steps do you perform after you develop branch rules and before you merge a ruleset? (Choose Two)

Select one or more of the following:

Review conflicts and warnings
Check in rules to merge
Check out rules to merge
Use DB trace to identify conflicts

Explanation

Question 15 of 104

1

A user has the following rulesets in their ruleset list:

Select one of the following:

Instance One
Instance Two
Instance Three
Instance Four
Instance Five
Instance Six

Explanation

Question 16 of 104

1

Which of the following statements is true about the rule resolution process?

Select one of the following:

If a user does not have access to the selected rule, the system sends a message that it could not find an appropriate rule to execute.
If the system finds more than one rule instance during rule resolution, users are provided with a choice of which rule to use depending on context.
Rule resolution applies to rules that are instances of classes derived from the Rule- and Work- base classes.
The class (context) of a rule takes precedence over the availability of the rule.

Explanation

Question 17 of 104

1

Which rule availability setting can you use to force the system to look for an instance of the rule in the next highest class or ruleset?

Select one of the following:

Not Available
Final
Withdrawn
Blocked

Explanation

Question 18 of 104

1

Adding parameters to a rule enables you to _____________________.

Select one of the following:

separate the functional behavior of a rule from specific business contexts
define the values used in a circumstance
copy data from a data page option on a property
help improve business users' ability to adapt to changing business conditions

Explanation

Question 19 of 104

1

Use the ________________ keyword to reference a parameter in the same rule in which the parameter is defined.

Select one of the following:

Parent
THIS
Local
Param

Explanation

Question 20 of 104

1

Which two fields are required when adding a parameter to a rule? (Choose Two)

Select one or more of the following:

Required
Name
Data type
Default value

Explanation

Question 21 of 104

1

When a process is configured to create temporary cases, which of the following occurs when a user creates a case?

Select one of the following:

The system creates an object ID and stores the case in the database.
The case is stored in memory.
The system stores case data on a clipboard page specifically for temporary cases.
Data is stored in the database.

Explanation

Question 22 of 104

1

What task must you perform in order to persist a temporary case?

Select one of the following:

Add a Persist Case SmartShape to the process.
Configure pyStartCase to persist a case.
Add a persistence condition to the case type.
Add an object ID to the case

Explanation

Question 23 of 104

1

You have added weighted conditions to duplicate case search in a case type. How do you configure the condition fields to differentiate between fields on the current case and fields on the existing case?

Select one of the following:

Suffix the keyword Primary to the value used in the current case.
Suffix the keyword Primary to the value used in the existing case
Prefix the keyword Primary to the value used in the existing case
Prefix the keyword Primary to the value used in the current case.

Explanation

Question 24 of 104

1

You want to evaluate cases as potential duplicates when the existing cases and the current case have the same create operator. How would you ensure that only cases with the same create operator are evaluated?

Select one of the following:

Add a weighted condition using the create operator value, an equals operator, and a weight of 100.
Add a must match condition using the create operator value and apply a weight of 100.
Add a must match condition where the create operator in an existing case is the same as in the current case
Add a weighted condition using the create operator value in both condition fields, an equals operation, and weight of 0.

Explanation

Question 25 of 104

1

Management reports that have an unacceptably large number of cases are incorrectly identified as duplicate cases. Which two approaches could you use to modify the duplicate case search process so that it produces fewer invalid duplicates? (Choose Two)

Select one or more of the following:

Adjust the threshold value.
Do not use a must match condition.
Adjust the condition weights.
Add a Persist Case step after the Duplicate Search step.

Explanation

Question 26 of 104

1

Field values enable you to _________________.

Select one of the following:

define the values used in a circumstance template
set default values for a property
customize a list of allowed values for a property based on the context of the property
test the validity of an input value

Explanation

Question 27 of 104

1

How do you customize the allowed values for a property based on the context of the property using field values?

Select one of the following:

Create a ruleset for each context, then create a field value record for each value and add the field value record to the appropriate ruleset.
Create a base field value record, then create a circumstance of the base record for each allowed value.
Create a field value record and a unique property record for each allowed value in each context.
Create a field value record for each value and set the context using the Apply to: field.

Explanation

Question 28 of 104

1

Sourcing a data page directly from a UI control is an example of which pattern?

Select one of the following:

System of Record (SoR) pattern
Snapshot pattern
Alias pattern
Reference pattern

Explanation

Question 29 of 104

1

Which feature would you use to implement the System of Record (SoR) pattern?

Select one of the following:

The copy data from a data page option on a property
No specific feature — just use a data page directly in the application
The Property-Ref activity method
The refer to a data page option on a property

Explanation

Question 30 of 104

1

Which feature would you use to implement the alias pattern?

Select one of the following:

The copy data from a data page option on a property
The refer to a data page option on a property
No specific feature — just use a data page directly in the application
The Property-Ref activity method

Explanation

Question 31 of 104

1

You add a new work group to an application. Which two organization rules do you need to update? (Choose Two)

Select one or more of the following:

Unit
Class groups
Operator ID
Work queue

Explanation

Question 32 of 104

1

Which requirement causes you to consider using Dynamic Class Referencing (DCR)?

Select one of the following:

To reuse a flow from the framework in the implementation layer
To ensure that flows copied into the implementation layer use workbaskets in the framework layer.
To route work to a workbasket that is given by the operator’s work group
To initiate implementation layer case types from the framework

Explanation

Question 33 of 104

1

The TGB organization structure has a Sales unit, and it belongs to a Marketing division. TGB plans to add new units for the East, Central, and West geographical sales regions. These regional units report to the Sales unit. How do you configure the organizational hierarchy to support the new structure?

Select one of the following:

Add the regional units to the Marketing division.
Add the regional units to the TGB organization.
Add a new Regional unit to the Marketing division and add the East, Central, and West regional units as child units to the Regional unit.
Add the regional units as sub-units to the Sales unit.

Explanation

Question 34 of 104

1

You configure a cascading approval step for insurance claims. The request requires approval from the submitter's manager. However, approval from operators in other units in the organization may be required. Which approval model would you use?

Select one of the following:

Authority matrix
Reporting structure
Work queue
Approval level

Explanation

Question 35 of 104

1

You have added a cascading approval step that uses an authority matrix. You have specified a decision table to determine the approvers for each case. You have confirmed that the conditions in the decision table are configured correctly. You test the configuration by entering requests that require multiple approvers. However, the system routes all requests to only one approver. Which of the following actions would you take to correct this issue?

Select one of the following:

Specify a page list for the authority matrix.
Add an approval level for each approver.
Set the decision table to evaluate all rows.
Add a row to the decision table that evaluates the submitter's workgroup manager.

Explanation

Question 36 of 104

1

Your application requires a cascading approval for expense reports. Approvals must follow the submitter's reporting structure, with the following thresholds. A manager must approve expense reports up to USD500. A director must approve expense reports up to USD1500. A vice president must approve expense reports of USD1500 or greater. How do you configure the approval process?

Select one of the following:

Select the reporting structure configuration with custom levels, then configure when rules to determine the number of levels.
Select the reporting structure configuration with custom levels, then configure a decision table to determine the number of levels.
Select the authority matrix configuration option.
Select the reporting structure configuration, then select All levels.

Explanation

Question 37 of 104

1

Your team is building an application for a contact center that handles a variety of customer requests. Business policies require that each customer interaction be conducted with the most appropriate next available Customer Service Representative (CSR). What is the best way to implement this requirement?

Select one of the following:

Use a ToWorkbasket router and Pega's Get Next Work functionality
Use a ToLeveledGroup router and Pega's Get Next Work functionality
Use a ToWorklist router and Pega's Get Next Work functionality
Use a ToWorkGroup router and Pega's Get Next Work functionality

Explanation

Question 38 of 104

1

You are tasked with configuring the Get Next Work functionality for an application. The requirement states that the workbaskets a user is associated with must be checked first, and all eligible assignments must be consolidated into a single list before being filtered and sorted. Which two of the following options do you select on an Operator ID record to configure the Get Next Work functionality to meet this requirement? (Choose Two)

Select one or more of the following:

Get from workbaskets first
Merge workbaskets
This is an unattended operator
Operator is available to receive work

Explanation

Question 39 of 104

1

What effect does the Use all workbasket assignments in user’s work group option have on how workbaskets are searched when using the Get Next Work functionality?

Select one of the following:

This option limits the workbasket search to only those workbaskets defined in the user's work group.
When a user clicks the Next Assignment link, the system checks the user's worklist. If assignments are available in the user's worklist, the assignments are filtered and sorted.
The workbaskets associated with the user are checked first. If no assignments are found in the user's workbaskets, the user's worklist is checked.
This option organizes all assignments in all of the workbaskets the user is associated with into a single list before the list is filtered and sorted.

Explanation

Question 40 of 104

1

What two artifacts should you prepare in advance before delegating a rule? (Choose Two)

Select one or more of the following:

An unlocked ruleset added to the Application rule as a production ruleset
An Access Group that has access to the production ruleset
An Access Role that has access to the production ruleset
A separate Operator ID that has access to the delegated rules

Explanation

Question 41 of 104

1

Select two benefits of adopting a rule delegation strategy. (Choose Two)

Select one or more of the following:

Adopting a rule delegation strategy can help lower the overall costs of building and maintaining business applications because fewer architects are required if business users can make changes to the application on their own.
Adopting a rule delegation strategy can help improve the business' ability to adapt to changing business conditions.
Adopting a rule delegation strategy allows business users and architects to focus on their specific tasks related to application development and maintenance.
Adopting a rule delegation strategy allows business users to change business policies more quickly by avoiding long approval processes.

Explanation

Question 42 of 104

1

Select two reasons for organizing delegated rules in a separate, unlocked ruleset. (Choose Two)

Select one or more of the following:

A separate, unlocked ruleset allows you to organize the business users responsible for managing the delegated rules.
A separate, unlocked ruleset allows for versioning control of the individual delegated rules in case you want to roll back changes.
A separate, unlocked ruleset is necessary because changes cannot be made to rules in a locked ruleset.
A separate ruleset can help prevent accidental or unauthorized changes to critical elements of the application.

Explanation

Question 43 of 104

1

Your application contains a top-level case type named Purchase Request and a Purchaser Order child case. The company has determined that only one user may open and work on a case at one time. However, users working on purchase orders should not lock out users working on the parent purchase request cases. How would you configure the lock settings among the case types?

Select one of the following:

Set default locking and the do not lock the parent option on purchase orders.
Set default locking on purchase requests and set the do not lock the parent option on purchase orders.
Set default locking and the do not lock the parent option on purchase requests.
Set optimistic locking on purchase requests and the do not lock the parent option on purchase orders.

Explanation

Question 44 of 104

1

In a prepare job offer process, you configured a Split For Each shape. The shape runs a compensation approval subprocess to a list containing four managers. The prepare job offer process resumes as soon as one manager completes the approval process. Which join condition in the Split For Each shape supports this requirement?

Select one of the following:

An Any join condition
An All join condition
A Some join condition
An Iterate join condition

Explanation

Question 45 of 104

1

An order fulfillment process includes a request for quotes from multiple shippers. You want the system to automatically call a quote request subprocess for each vendor. How would you configure your process?

Select one of the following:

Add a Subprocess shape for the request subprocess and specify the Spinoff option.
Add a Split For Each step to the case lifecycle and run the subprocess for each vendor on a page list.
Add a Split For Each shape and run the request subprocess for each vendor on a page list.
Add a Split Join shape and run the request subprocess for each vendor on a page list.

Explanation

Question 46 of 104

1

You are tasked with configuring a screen flow. The requirement states that every step in the screen flow must be executed sequentially.

Select one or more of the following:

Enable navigation link
Perform post-processing when navigating away from step
Only allow navigating back to this step
Save on last step

Explanation

Question 47 of 104

1

Which answer best describes the benefit of using screen flows?

Select one of the following:

Screen flows help you organize separate tasks into steps so you can control how, when, and by whom work is performed for each step.
Screen flows provide an easy way to add a step to a process that is preconfigured with functionality, such as sending an email or creating a case.
Screen flows help a single user complete complex tasks by presenting multiple screens in a logical sequence.
Screen flows provide a way to add an assignment to a process that is preconfigured with one or more actions a user can take.

Explanation

Question 48 of 104

1

When configuring a screen flow, you identify a single harness to define the navigation style for the screen flow. Where is the harness identified?

Select one of the following:

On the Design tab of the screen flow
On each Assignment shape
On the Start shape
On the Flow Action connectors

Explanation

Question 49 of 104

1

A new system architect questions the value of allowing attachments to cases. What would be your best response?

Select one of the following:

Adding attachments to cases is the method of choice for storing case documentation.
Case flow is dependent on attachments because attachments provide information essential to a case.
Pega provides attachment functionality out-of-the-box, so it must be important.
Attachments can provide additional information required to process a case.

Explanation

Question 50 of 104

1

Pega provides a feature to upload attachments out-of-the box. Which attachment feature must be configured by a system architect?

Select one of the following:

The uploaded attachments are read-only
The steps in which attachments are allowed
User access to attachments and document security
The attachment rule set

Explanation

Question 51 of 104

1

A new system architect asks you how user access to attachments is managed. In your response, you indicate there are two ways to configure attachment access. Which statement is the best next sentence of your response?

Select one of the following:

User access can be configured by when rule or case type.
User access can be configured by attachment class.
User access can be configured by circumstancing the attachment category.
User access can be configured by privilege and/or when rule.

Explanation

Question 52 of 104

1

You created a data transform to concatenate a user's first and last name values. You add the concatenate data transform to a flow action as a post-processing action. What occurs when the flow runs?

Select one of the following:

The data transform runs every time the user performs the flow action run.
The data transform runs before every flow action run.
The data transform runs after the user enters data in the first name and last name fields.
The data transform runs after the flow action runs if the user enters data in the first and last name fields.

Explanation

Question 53 of 104

1

Which two statements about adding a pre-processing action to a flow action are true? (Choose Two)

Select one or more of the following:

The action only runs the first time the flow action is performed on an assignment.
The action runs each time the user returns to the assignment.
The action automatically runs if the flow action has the highest likelihood for the assignment in the process flow.
The user can opt to skip the pre-processing action.

Explanation

Question 54 of 104

1

The purpose of a Circumstance Template is to __________.

Select one of the following:

define the properties used in a circumstance
provide a template for business users to change circumstances when completing a task
provide a list of all potential circumstances in one place
define the values used in a circumstance

Explanation

Question 55 of 104

1

The purpose of a Circumstance Definition is to _________.

Select one of the following:

define the list of all circumstance values for a rule
define the properties used in a circumstance
define the values used in a circumstance
define the values available to an end user in the application

Explanation

Question 56 of 104

1

Consider the following table where a correspondence is circumstanced based on country.

Select one of the following:

01-01-01
01-01-20
01-01-25
01-01-35

Explanation

Question 57 of 104

1

Consider the following table where a correspondence is circumstanced based on country.

Select one of the following:

01-01-30
01-01-15
01-01-10
01-01-20

Explanation

Question 58 of 104

1

Which two steps do you perform to update the logo in a portal header?

Select one or more of the following:

Upload the new image to a binary file record.
Reference the image in the application record.
Reference the image in the portal skin.
Update the portal header to reference the new image.

Explanation

Question 59 of 104

1

Which record do you configure to add an item to the left-pane menu in the Case Manager portal?

Select one of the following:

Portal record
Skin record
Navigation record
Harness record

Explanation

Question 60 of 104

1

Which two options do you configure on a portal record? (Choose Two)

Select one or more of the following:

Determine which skin to use to apply branding to the portal.
Identify the user role of the type of user who would access the portal.
Change the application(s) available to users.
Configure the positioning of the navigation pane within the portal.

Explanation

Question 61 of 104

1

Select two of the following best practices to follow when designing mobile applications. (Choose Two)

Select one or more of the following:

Avoid sourcing controls and grids from data pages.
Use controls that allow tapping.
Layout widths should be specified in pixels since the response breakpoint is set in pixels.
Use layout groups instead of containers to group sections in harnesses.

Explanation

Question 62 of 104

1

How is the signature stored in the application when using a Signature Capture control?

Select one of the following:

A class
A page list
An attachment
A field value

Explanation

Question 63 of 104

1

Which two of the following options are user interface best practices to display a list of items to a user who may access the application on mobile and non-mobile devices? (Choose Two)

Select one or more of the following:

Source the list using a data page.
Use a grid and mark the columns in the grid as primary, secondary, and other.
Use a repeating dynamic layout.
Define the layout widths in pixels.

Explanation

Question 64 of 104

1

A ________ defines the look and feel of an application.

Select one of the following:

mixin
control
skin
Format

Explanation

Question 65 of 104

1

You want to create a reusable font style for buttons, and links. To do this, you would create a ___________.

Select one of the following:

overlay
Format
control
mixin

Explanation

Question 66 of 104

1

Which option represents the relationship between mixins, controls, and formats?

Select one of the following:

A control specifies a format which uses a mixin.
A format uses a mixin that defines a control.
A control specifies a mixin which defines a format.
A mixin specifies a control which defines a format.

Explanation

Question 67 of 104

1

Which two of the following options are benefits of using skin inheritance? (Choose Two)

Select one or more of the following:

Creating standard styles in a parent skin are easier to maintain.
In order to maintain consistency, child skins cannot modify formats and mixins from the parent skin.
Child skins only need to customize the parent skin.
Child skins can reuse mixins and formats from other child skins with the same parent.

Explanation

Question 68 of 104

1

You create a report that uses data from two classes. Which of the following reporting requirements requires the use of a subreport?

Select one of the following:

Columns to display are: Operator Name, Operator Division, Count of Purchase Requests created by the operator. Filter the results by unresolved status.
Columns to display are: Operator Name, Last updated Case ID, Last updated Case Status, Update Date.
Columns to display are: Operator Name, Operator Division, Count of Purchase Requests created.
Columns to display are: Manager, Name, Count of operators that report to each manager.

Explanation

Question 69 of 104

1

You create a report in a work class that displays the assigned operator and task name for each open case. Which two ways can you combine data in the Assign-Worklist class for your report? (Choose Two)

Select one or more of the following:

Use a class join to the Assign-Worklist class. Specify a join filter where the Worklist Assignment association rule is equal to an object identifier in the work class.
Use a class join to the Assign-Worklist class. Specify a join filter where the pxRefObjectKey in the join class is equal to an object identifier in the work class.
Use a Worklist Assignment association rule to join the Work class to the Assign-Worklist class.
Use a Worklist Assignment association rule to join to the Assign-Worklist class. Specify a join filter where the pxRefObjectKey in the join class is equal to an object identifier in the work class.

Explanation

Question 70 of 104

1

You are asked to create four reports. Which report would require joining classes?

Select one of the following:

A list of all cases and the assigned user for each case, with child cases categorized by the case ID of the parent case
A list of all cases created by the operator along with the work status of each case
A list of flow actions and average turnaround time, categorized by Performer
A list of all worklist assignments grouped by the operator who is performing the action

Explanation

Question 71 of 104

1

In which order are rules and data instances applied for a service?

1. Service rule
2. Service Package
3. Service Activity
4. Mapping rule (from format received by the service to Clipboard structure)
5. Mapping rule (from Clipboard structure to format specified by service type)

Select one of the following:

1, 2, 3, 4, 5
2, 1, 3, 4, 5
1, 2, 4, 3, 5
2, 1, 4, 3, 5

Explanation

Question 72 of 104

1

Select two actions can you do with the Pega API? (Choose Two)

Select one or more of the following:

Create a new case
Add a property to a data class.
Access data from a data page
Update a decision table.

Explanation

Question 73 of 104

1

Match each condition with the correct definition.

Select one of the following:

Security->(C), Mapping->(D) ,Queue When->(A), Service->(B)
Security->(D), Mapping->(B) ,Queue When->(A), Service->(C)
Security->(B), Mapping->(D) ,Queue When->(A), Service->(C)
Security->(B), Mapping->(A) ,Queue When->(D), Service->(C)

Explanation

Question 74 of 104

1

Which two types of records does the External Database Table Class Mapping wizard create? (Choose Two)

Select one or more of the following:

The Database Table data instance
The Database data instance
The Connect SQL rule used to retrieve the data
The Property rules used to map to the table columns

Explanation

Question 75 of 104

1

Which two of the following options are good uses of Connect SQL rules? (Choose Two)

Select one or more of the following:

Execute SQL statements that contain database vendor specific syntax.
Execute a complex SQL statement such as a join or stored procedure against an external database.
Execute custom SQL statements to improve performance of queries and updates to the PegaRULES database.
Update an external table as part of a distributed transaction.

Explanation

Question 76 of 104

1

Which two statements about external classes are true? (Choose Two)

Select one or more of the following:

An external table can be part of a class group.
An external class always has an associated database table instance.
External classes must contain the pzInsKey and pxObjClass properties.
It is possible to create declare index rules on external classes.

Explanation

Question 77 of 104

1

An activity executes the following five steps on an integer property in the sequence shown.

1. Property-Set (value = 5)
2. Obj-Save
3. Property-Set (value = 10)
4. Obj-Save with Write now
5. Commit

What is the value in the database after all five steps complete?

Select one of the following:

15
5
10
unchanged

Explanation

Question 78 of 104

1

Which symbolic index keyword adds an element to the end of a page list property?

Select one of the following:

<INSERT>
<PREPEND>
<APPEND>
<CURRENT>

Explanation

Question 79 of 104

1

In which of the following situations would you simulate a data page?

Select one of the following:

When a large amount of data needs to be simulated
When the connector is available for the integration
When the interface definition is not finalized
When the data page writes data to the external system

Explanation

Question 80 of 104

1

What does the orange triangle in this screen indicate?

Select one of the following:

The service could not be reached
The data page's connector is not properly configured
The service returned an error
The data page source system is simulated

Explanation

Question 81 of 104

1

Which two of the following situations require an activity? (Choose Two)

Select one or more of the following:

Call a connector from a data page
Simulate a data page
Simulate a connector
Call a connector from a flow

Explanation

Question 82 of 104

1

An error is generated as a connector invokes a remote service. Which of the following could be an example of a transient error?

Select one of the following:

The service is running on a system that is temporarily not available.
The request is sent to the wrong system.
The returned order total is incorrectly calculated.
The request format is not understood by the service.

Explanation

Question 83 of 104

1

You want to write all errors detected when loading a data page to a log file. How would you do that?

Select one of the following:

Use a transition condition.
Use the error handling flow.
Invoke the error handler from the post processing activity in a data page.
Use an existing function in the error handling data transform.

Explanation

Question 84 of 104

1

Which two of the following statements are the most accurate with respect to the error handler flow? (Choose Two)

Select one or more of the following:

The standard error handler flow is final and cannot be customized.
The error handler flow is the recommended way to handle all integration errors.
The error handler flow is invoked if the error is not handled elsewhere.
The standard connector error handler flow can help recover from transient errors.

Explanation

Question 85 of 104

1

Which two of the following steps are needed to implement Global Resource Settings? (Choose Two)

Select one or more of the following:

Create a data page
Create a report definition
Create a data transform
Create a property for each environment

Explanation

Question 86 of 104

1

Select two benefits of using Global Resource Settings. (Choose Two)

Select one or more of the following:

Global Resource Settings improves the performance for integration with the external system.
Global Resource Settings allow you to manage settings in one place.
Global Resource Settings allow you to define settings for all your different environments in one location.
Global Resource Settings allow you to manage settings without needing to unlock rulesets.

Explanation

Question 87 of 104

1

Which of the following record types are editable on a production system?

Select one of the following:

SOAP Connector
Data Transform
Property
Dynamic System Setting

Explanation

Question 88 of 104

1

The following rule and record types are invoked to determine the endpoint for a connector.

1. A data page property is referenced.
2. The value is used by the SOAP connector to invoke the service.
3. The SOAP Connector is invoked.
4. The data transform for the data page is executed if the page is not already available on the clipboard.
5. The data transform invokes a utility function to obtain the value of a dynamic system setting.

Select the order in which these rules and records are executed.

Select one of the following:

3, 1, 4, 5, 2
5, 4, 3, 2, 1
3, 2, 4, 1, 5
3, 4, 1, 5, 2

Explanation

Question 89 of 104

1

To help ensure application stability and scalability, during which two of the following times do you use Log Analyzer (PLA) to test Pega applications? (Choose Two)

Select one or more of the following:

User Acceptance Testing (UAT)
Throughout the development cycle
Immediately before deployment
Performance and stress testing

Explanation

Question 90 of 104

1

Identify the log you examine to view warnings, errors, and information messages about internal operations.

Select one of the following:

Alert log
Services-PAL
BIX log
Pega log

Explanation

Question 91 of 104

1

What application do you use to perform remote logging?

Select one of the following:

System Management Application (SMA)
Logging Level Settings tool
Database trace
Performance Profiler

Explanation

Question 92 of 104

1

Identify the log you examine to view performance-related issues.

Select one of the following:

BIX log
Pega log
Service-PAL log
Alert log

Explanation

Question 93 of 104

1

Which of the following tools is generally used first when analyzing system performance?

Select one of the following:

Database Trace
Performance Profiler
Clipboard
Performance Analyzer

Explanation

Question 94 of 104

1

The reason you want to run a process immediately before taking performance readings is ____________.

Select one of the following:

to make sure we know which buttons to click so we can be quick
to make sure there are no bugs in the system
to train the system which process we’re going to measure
to allow the rules to assemble

Explanation

Question 95 of 104

1

Which performance tool would you use to collect performance data for individual steps in a data transform?

Select one of the following:

Performance Profiler
Performance Analyzer (PAL)
Clipboard
Database Trace

Explanation

Question 96 of 104

1

You want to allow a user to run a specific flow action without conditions. Which two steps must you perform? (Choose Two)

Select one or more of the following:

Add the privilege to the flow action record.
Add the privilege to the user's access group.
Add the privilege to a user role that is available to the user's access group.
Add an Access When record to the flow action.

Explanation

Question 97 of 104

1

Which requirement do you satisfy with an Access When record?

Select one of the following:

Managers can perform an optional action to transfer a case to another workbasket, but users cannot.
Company policies require that you only allow managers to run reports on purchase requests.
Accountants can edit a purchase request only if the case was created by a member of their assigned department.
Government regulations require that you explicitly block user access to personally identifiable information.

Explanation

Question 98 of 104

1

For what reason would you configure an Access Deny record?

Select one of the following:

To explicitly prevent users from deleting cases to satisfy a company policy.
To prevent users from deleting attachments to a case.
To prevent users from updating cases during a particular stage of the case life cycle.
To prevent users from performing a specific flow action.

Explanation

Question 99 of 104

1

An agent runs every day at 7:00 A.M. You have been asked to update the agent so that it runs once every 300 seconds. How would you modify the agent schedule to meet this requirement?

Select one of the following:

Keep the Periodic pattern. In the Parameters dialog, update the schedule.
Change the Recurring pattern to Periodic and enter the Interval value.
Change the Periodic pattern to Recurring. Open the Parameters dialog and update the schedule.
Keep the Recurring pattern and update the Interval value.

Explanation

Question 100 of 104

1

An agent in your system is running on three nodes. You have been asked to update the agent's schedule interval. How would you make your update?

Select one of the following:

Open the agent schedule for each node the agent is running on and update the interval.
In SMA, select a node, then select the agent, and finally update the interval.
For each node, copy the agent schedule instance and modify the interval.
Open the agents rule and update the interval.

Explanation

Question 101 of 104

1

You have configured an agent to automatically send correspondence. The agent runs in standard mode using AQM. As of the last agent run, entries failed to commit and the correspondence was not sent. Which two approaches could you take to troubleshoot the issue? (Choose Two)

Select one or more of the following:

Open the Requestor Management screen in SMA, select the requestor with a waiting message, and display the error message and stack trace information.
Open the Broken Process queue, select the entry, and view the error message and stack trace information.
Open the Requestor Management screen in SMA, select the requestor with a waiting message, and run the Tracer.
Open the Broken Process queue, select an item, and run the Tracer.

Explanation

Question 102 of 104

1

Which two components does the Application Packaging wizard prompt you to include when you generate an archive file? (Choose Two)

Select one or more of the following:

Data instances
Checked-out rules
Data types
Product rules

Explanation

Question 103 of 104

1

You use the Application Import wizard to import an archive file on a destination system. When does the destination system begin executing the imported rules?

Select one of the following:

Users can start executing the new rules the next time they log in regardless of whether the import is complete or not.
Pega Platform ensures that an entire ruleset is imported before the rules in it start executing
Pega Platform ensures that the entire ZIP file is imported before users can execute the imported rules.
Users can start executing rules as soon as the rules are imported.

Explanation

Question 104 of 104

1

You create a product rule to generate an application archive file for export. Which two actions do you perform before creating the archive file? (Choose Two)

Select one or more of the following:

Check in the rules that are in the application's rulesets.
Associate application data instances with application rulesets.
Create a new version of the application.
Unlock the application rulesets.

	Created by Pedro Henrique Lima almost 5 years ago

	Copied by Pedro Henrique Lima over 4 years ago

Quiz on Pega CSSA 7.3/7.4 Simulado Academy, created by Pedro Henrique Lima on 08/11/2019.

Pega CSSA 7.3/7.4 Simulado Academy

Question 1 of 104

You have a requirement to create an email correspondence that can be reused by other applications. In which two layers of the Enterprise Class Structure could you apply the email correspondence rule? (Choose Two)

Select one or more of the following:

Explanation

Question 2 of 104

Which layer of the Enterprise Class Structure contains assets that cannot be reused in other applications?

Select one of the following:

Explanation

Question 3 of 104

Which layer of the Enterprise Class Structure contains generalized assets that are then extended by specific implementations?

Select one of the following:

Explanation

Question 4 of 104

When creating a new ruleset version, what extra step must the system architect perform?

Select one of the following:

Explanation

Question 5 of 104

What is the importance of application versioning?

Select one of the following:

Explanation

Question 6 of 104

What advantage does skimming provide over lock and roll as a versioning option?

Select one of the following:

Explanation

Question 7 of 104

A user is granted access to an application which lists HRApps:02-02 under Application rulesets. The ruleset contains rules in the versions below:

Select one of the following:

Explanation

Question 8 of 104

Select two record types that are involved when configuring a production ruleset. (Choose Two)

Select one or more of the following:

Explanation

Question 9 of 104

A claims framework contains two rulesets, ClaimsFW and ClaimsFWInt, and an application built on the framework contains two rulesets, Claims and ClaimsInt. Which statement is false if all the rulesets are configured as Application Validation?

Select one of the following:

Explanation

Question 10 of 104

Select one of the following:

Explanation

Question 11 of 104

Select one or more of the following:

Explanation

Question 12 of 104

Which two of the following prerequisites would you choose to create a branch rule for parallel development? (Choose Two)

Select one or more of the following:

Explanation

Question 13 of 104

A branch ruleset is a ruleset that ___________. (Choose Two)

Select one or more of the following:

Explanation

Question 14 of 104

Which two of the following steps do you perform after you develop branch rules and before you merge a ruleset? (Choose Two)

Select one or more of the following:

Explanation

Question 15 of 104

A user has the following rulesets in their ruleset list:

Select one of the following:

Explanation

Question 16 of 104

Which of the following statements is true about the rule resolution process?

Select one of the following:

Explanation

Question 17 of 104

Which rule availability setting can you use to force the system to look for an instance of the rule in the next highest class or ruleset?

Select one of the following:

Explanation

Question 18 of 104

Adding parameters to a rule enables you to _____________________.

Select one of the following:

Explanation

Question 19 of 104

Use the ________________ keyword to reference a parameter in the same rule in which the parameter is defined.

Select one of the following:

Explanation

Question 20 of 104

Which two fields are required when adding a parameter to a rule? (Choose Two)

Select one or more of the following:

Explanation