Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Question 1 of 69

1

When troubleshooting a system fault, if the Web Interface or SAT are unavailable, which method should be used?

Select one of the following:

SAL
TTY2
CLI
MODEM

Explanation

Question 2 of 69

1

Which two series support RAID 5 configuration for CM6.0? (Choose two)

Select one or more of the following:

S8730 Server with 8 GB RAM
S8800 Server with 12 GB RAM
S8510 Server with 8 GB RAM
S8300D Server with 8 GB RAM

Explanation

Question 3 of 69

1

Hunt Group Number 99, with Group Extension 4199, is administered for messaging. Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?

Select one of the following:

Shoe tracelog huntgroup 4199
View logs real time huntgroup 99
Display real time logs hunt group 99
List trace hunt-group 4199

Explanation

Question 4 of 69

1

A customer needs to set up SIP integration on Communication Manager Messaging Application 6.0 What are three pieces of information that are needed to meet this requirement? (Choose three)

Select one or more of the following:

Signaling group number
SIP Domain
Transport Method
Extension length
Hunt Group number

Explanation

Question 5 of 69

1

Which three are tests that can be performed to verify a Communication Manager Messaging 6.0 application is working properly? (Choose three)

Select one or more of the following:

Verify the hunt group status
Check the messaging port status using the display port command
Call the messaging Hunt Group
Check the messaging port status using the status port command
Perform Message Waiting Indication test

Explanation

Question 6 of 69

1

On a Media Gateway G450, which slots are permitted for the MM 342

Select one of the following:

V1 and V2
V6 and V6
V3 and V8
V5 and V7

Explanation

Question 7 of 69

1

A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server. What is the total minimum memory requirement for this upgrade?

Select one of the following:

4 GB RAM
8 GB RAM
12 GB RAM
16 GB RAM

Explanation

Question 8 of 69

1

Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?

Select one of the following:

Communication manager Web interface
Console Domain > Server Management > Path management
Console Domain > Server Management > Platform Upgrade
Console Domain > Virtual Machine Management

Explanation

Question 9 of 69

1

Which three statements about CM_Duplex CM 6.0 are true?

Select one or more of the following:

Software duplication is available, but hardware duplication is not available.
The S8510 server is not used for duplication
Server duplication is configured via "Failover" option on CDROMs web interface
S8730 with DAL 2 card does not support server duplication in CM 6.0.
The CM duplex template supports CMM

Explanation

Question 10 of 69

1

Which gateway command resets the Gateway back to factory default?

Select one of the following:

Reset
Restart
Softboot
Nvram init

Explanation

Question 11 of 69

1

A technician wants to test and see if the voice channel between two IP phones. Which command in Site Administration Terminal (SAT) can be used to determine?

Select one of the following:

Status station <extension>
Status shuffling <extension>
List station <extension>
Test station <extension>

Explanation

Question 12 of 69

1

Which Ethernet port on S8800 server is for server duplication?

Select one of the following:

ETH0
ETH1
ETH2
ETH3

Explanation

Question 13 of 69

1

Which three commands are a part of Avaya Aura CM_survRemote_Embed templates? (Choose three)

Select one or more of the following:

Utility Services
CM 6.0
Session Manager
CMM 6.0
AES 6.0

Explanation

Question 14 of 69

1

A technician is planning to support to upgrade an Avaya communication Manager system to release 6.0 from release 5.2. Which two tasks must be performed during the upgrade procedure? (Choose two)

Select one or more of the following:

The S8700-Series Servers must be replaced by S8800 servers.
All G350 gateways must replaced by S8800 servers.
The Survivable Remote servers must be Upgraded to Release 6.0
The survivable Remote servers can stay at Release 5.2

Explanation

Question 15 of 69

1

In the navigation pane, what are the steps to create a test mailbox on the Communication Manager Messaging 6.0 Application?

Select one of the following:

Select messaging administration, then subscribe management, and then click add or edit.
Select messaging administration, the click new.
Select messaging administration, Select messaging administration, and then click add.
Select Forms control, and then at the command line run then add subscribe command.

Explanation

Question 16 of 69

1

When configuring a G450 Media gateway, which two port settings must be set? (Choose two)

Select one or more of the following:

FTP Server
100 MB port speed
Auto-negotiation enabled
Full Duplex

Explanation

Question 17 of 69

1

A switch administrator wants to busy out trunk 53 for maintenance and administration work however, there is one call active on port 5 of the trunk. Which command should be extended from the SAT terminal to find out the IP addresses and port of the near-end and far-end node of the auto connection?

Select one of the following:

Status trunk 53/5
List trace port 53/5
Display trunk 53/5
Display trunk statistics 53/5
Status port 53/5

Explanation

Question 18 of 69

1

Which three objects can be downloaded from the product license delivery system (PLDS)? (Choose three)

Select one or more of the following:

Authentication file
Patches
Firmware updates
PuTTY
Communication manager templates

Explanation

Question 19 of 69

1

Which two statements describe the new procedures that a customer can use to directly and permanently turn ON or OFF licensed features in CM 6.0? (Choose two)

Select one or more of the following:

Customers can turn features ON or OFF using the change system parameters customer- options command on the system access terminal (SAT).
Customers can turn features ON or OFF using the system management interface features administration page.
Customers can PDLS directly to turn futures ON or OFF and then download and install a new license file with the updated features.
Customers can turn features ON or OFF using the WebLM server and the system platform management Console

Explanation

Question 20 of 69

1

Which statement describes the action to assure the CM_SurvRemoteEmbeded template was installed correctly?

Select one of the following:

From a browser, using the communication manager IP address, successfully log into the communication manager system management.
From a browser logged into communication Manager, Select administration > server (Maintenance)> server>Process Status. Click on view.
From a browser logged into the system Management Console verify cm, bsm, and utility_server and application status is running
When monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays.

Explanation

Question 21 of 69

1

Which three statements about when communication manager release 6.0 is deployed as a feature server are true? (Choose three)

Select one or more of the following:

It supports G450/G430 gateways.
It supports Analog trunks.
It supports SIP telephones.
It supports SIP trunks.
It supports Digital trunks.

Explanation

Question 22 of 69

1

When using the Avaya Site Administrator CEDI interface, which command would be used to check the configuration of telephone set with the extension of 1000?

Select one of the following:

Print station 1000
Display station 1000
Show station 1000
View station 1000

Explanation

Question 23 of 69

1

Which three statements are true for a configuration that consists of Duplicated S8800 main servers with a duplicated port network and is a survivable core? (Choose three)

Select one or more of the following:

Software duplication exists between the two main S8800 servers.
The two main servers have duplication IPSls
Hardware Duplication exists between the two main S8800 servers.
The main servers share a single control network
All Clam media and Medpro cards must be in a one subnet

Explanation

Question 24 of 69

1

A technician has installed pair or duplication S8800 servers with IPSI duplication. Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)

Select one or more of the following:

The enable operation of IPSI Duplication field on the display system-parameter duplication form is set to y.
IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing
Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result column.
A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI.

Explanation

Question 25 of 69

1

What are the recommended CLAN and MEDPRO port settings?

Select one of the following:

10Mbps half duplex
1000Mbps full duplex
100Mbps full duplex
100Mbps half duplex

Explanation

Question 26 of 69

1

Which two statements are true regarding a media gateway full back (recovery) to main (primary) servers? (Choose two)

Select one or more of the following:

All active (stable) Ip calls on the media gateway drop when the media gateway falls back from the survivable remote server to the main server.
The list survivable-processor command can be used to confirm that the remote Survivable server is registered to the main server and that the remote survivable server is no longer active.
When the main server recovers it issues registration requests to all the media gateways in the network.
Executing the status media-gateways command from the main server will show which media gateways are registered with the main server.

Explanation

Question 27 of 69

1

To confirm that a survivable server is currently registered to the main CM servers, using the SAT. Which command should be entered?

Select one of the following:

Status ess clusters
Display survivable-processors
Status ess port-networks
Status survivable-processors

Explanation

Question 28 of 69

1

A customer wants to enable audio encryption for Ip phone calls, but the option is not available on any IP- codec-set. Which procedure must be followed to obtain this feature?

Select one of the following:

From the SAT, type change system-parameter customer-options. Find the media encryption over IP field, and set the option to Y. Save the change
From the SMI Feature administration page, find the media Encryption over IP field Set the option to Y. save the changes
From the system platform WebLM page. Find the media Encryption over IP field set the option to Y. Save the changes.
From the Aura System Manager's Feature Server Administration page. Find the media encryption over IP field, and set the option to Y. save the changes.

Explanation

Question 29 of 69

1

Which statement describes the action to assure the system platform was installed correctly?

Select one of the following:

From the laptop connected to the network, ping the dom0 IP address and verify a successful response.
Immediately after the installation, verify the DVD is ejected from the drive and that the server reboots.
After connecting the server using PuTTY and logging in as root, verify there are no errors when running the xm list command.
From the system management console browser, verify domain-0 and cdom are running

Explanation

Question 30 of 69

1

Which statement is true about duplex servers in CM 6.0?

Select one of the following:

The survivable remote Duplex template includes branch session manager
CM uses the high availability that system platform can now provide
The license for the survivable server is different than the license file of the main server
The main and all survivable servers require an authentication file

Explanation

Question 31 of 69

1

System platform web console is used to apply the service pack for which three virtual machines? (Choose three)

Select one or more of the following:

System Platform
AES 6.0
Utility Server
Communication Manager 6.0
CMM 6.0

Explanation

Question 32 of 69

1

Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) to CM 6.0?

Select one of the following:

Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.
Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting.
Insert the raid CD, reboot the server, and than take backup.
Insert the hard drive and the 3rd hard drive is incorporated automatically.

Explanation

Question 33 of 69

1

Which communication manager 6.0 command is used to add a new survivable?

Select one of the following:

add surviveable-processor
add survivable-processor ess <node-name>
add survivable-processor core
add survivable-processor <node-name>

Explanation

Question 34 of 69

1

Which Ethernet port on S8800 server is connected to the customer network?

Select one of the following:

ETH0
ETH1
ETH2
ETH3

Explanation

Question 35 of 69

1

When using the Avaya Site Administration GSDI interface, which command would be use to built a new telephone set with the extension of 1000?

Select one of the following:

New station 1000
Add station 1000
Build station 1000
Add set 1000

Explanation

Question 36 of 69

1

Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)

Select one or more of the following:

Utility services
CM 6.0
Session manager 6.0
Avaya Enablement Services (AES)

Explanation

Question 37 of 69

1

When using the Avaya Site Administrator GEDI interface, which command would be used to confirm the media gateway number 3 is registered?

Select one of the following:

Show media-gateway 3
Display media-gateway 3
Print media-gateway 3
View media-gateway 3

Explanation

Question 38 of 69

1

For Avaya Aura CN6.0, how is the license file installed on the server?

Select one of the following:

By accessing the web interface of CM
Using the load license command through shell prompt of CM
Through the web interface of DOM0
Using the web interface of Console Domain

Explanation

Question 39 of 69

1

Concerning the type of integration with communication manager, on the navigation pane, where is the communication manager messaging 6.0 application mentioned or configured?

Select one of the following:

Click the system wide Messaging parameters, than switch integration type field.
Click the switch link administration, and then switch type.
Click integration type
Click Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field

Explanation

Question 40 of 69

1

A small enterprise customer needs 450 SIP / H.323 users. Which CM 6.0 template will be the most economical solution?

Select one of the following:

CM_Simplex
CM_survRemote_Embeded
CM_Duplex
CM_onlyEmbeded

Explanation

Question 41 of 69

1

For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication with IPSts?

Select one of the following:

Eth0
Eth1
Eth2
Eth3

Explanation

Question 42 of 69

1

When configuring the G450 Media gateway using the Gateway CLI interfaces which command would be used to view the serial number and software status?

Select one of the following:

Show serial number
Show system
Print G450
Show G450

Explanation

Question 43 of 69

1

Which three elements are needed to CLAN IP interface? (Choose three)

Select one or more of the following:

Network region
Gateway node name
Node name
Duplicate node name
link

Explanation

Question 44 of 69

1

Which three procedures are used to determine whether a gateway with a survivable remote server has lost its H.248 link (connection) to the main (Primary) servers? (Choose three)

Select one or more of the following:

Execute the communication manager command display alarms, to set whether the link loss delay timer has expired.
Execute the communication manager command display alarms, to see whether the no service timeout timer (NSTT) has expired.
Execute the SAT command list media-gateway from the remote survivable server, to determine whether media gateway is registered to the survivable server.
Execute the SAT command list media-gateway to determine which media gateways are not registered to the main server.
Execute the command status H.248 link from the remote gateway, to determine whether the link to the main server is active.

Explanation

Question 45 of 69

1

A user at a remote branch location is registered to a G450 media Gateway connected via processor Ethernet (PE) to a main communication manager in the core. They report that they are no longer able to place calls to users at the core. Which three procedures can be used to diagnose the source of problem? (Choose three)

Select one or more of the following:

Confirm that the registered field on the Communication Manager displays media-gateway to Y.
Conform that the PE interface is active by executing the communication manager display processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.
Use the show MGC command on the media gateway to confirm the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway.
Use the list registered -P -station command on the communication manager to determine whether the user on the media gateway is registered.
Use the list survivable processor command to confirm that the survivable server is registered to the main communication manager.

Explanation

Question 46 of 69

1

How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?

Select one of the following:

By going to the home page of console domain.
By going to the homepage of Avaya communication manager.
By going to the home page of Dom 0
By using the internet explorer http://Cdom .lpaddr/vm

Explanation

Question 47 of 69

1

Which circuit pack provides an IP Server interface in an Avaya G650 Gateway?

Select one of the following:

TN2312BP
TN2342Ac
MM711
MM714

Explanation

Question 48 of 69

1

A technician is asked to retrieve a maintenance log for CMM that shows the information for 8"00 AM to 5:00 PM local tome that day. Which shell command should be executed to retrieve the maintenance log?

Select one of the following:

Show main log 0800 101010
Displog-1 maint-d 10/10/10 08:00
Print log for maint 101010 08:00
Print-1 maint-d 08:00 10/10/10

Explanation

Question 49 of 69

1

Which MAC address is recommended for the license file?

Select one of the following:

The MAC address of the Console domain
The MAC address of the CM eth0 port
The MAC address of the CM host name
The MAC address of the DOM0

Explanation

Question 50 of 69

1

A newly installed main Cm 6.0 server indicates it is in license error mode. A technician again 45 minutes later and it is still in error mode. The license was installed from the system management interface (SMI)? Which statement describes the reason for the error mode?

Select one of the following:

The installer used the wrong interface to install the license and it is therefore not installed.
The server cannot communicate with the IPSI or media gateway whose serial number was used in the license file.
The license audit runs every 60 minutes and the error will be resolved in 15 minutes.
The installer loaded a license for one of the survivable servers, not the main server, and the IPSIs, media Gateways, and/or IP phones have registered to it

Explanation

Question 51 of 69

1

The backup communication Manager, what two choices does the customer have? (Choose two)

Select one or more of the following:

Backup/restore
Backup now
Schedule backup
Backup/restore later

Explanation

Question 52 of 69

1

A user at extension 1111 complaints that when dialing extension 2222, the call is the call is unexpectedly answered by a person at extension 3333. All other calls made are connected as expected. There is not display on the phone. While at the SAT, the technician has the user repeat the call to extension 2222. Which command identifies the reason this phone call is behaving in the expected way?

Select one of the following:

List trace station 1111
List trace station 3333
Status station 1111
Display station 3333

Explanation

Question 53 of 69

1

Which greeting should be received when you are calling the messaging Hunt group?

Select one of the following:

Welcome to Audix
Welcome to messaging
Your call is being answered by Audix
Please leave a message after the tone

Explanation

Question 54 of 69

1

What two pieces of information does the product licensing and delivery system (PLDS) required to be entered for a license file to be generated? (Choose two)

Select one or more of the following:

Serial number
License activation code
MAC address
Platform type

Explanation

Question 55 of 69

1

Which statement describes the action to assure the CM_Simplex Template was installed correctly?

Select one of the following:

From browser logged into Systen Management Console, verify cm and utility_Server appear and application state is running.
From a browser using the communication Manager IP address, successfullylog into the communication manager system management interface (SMI)
When monitoring the template installation workflow status, verify the message, "Wizard completely successfully" displays.
From a browser logged into communication manager, select administration > server( maintenance)> server>process status, click on view and verify communicaMgr appears

Explanation

Question 56 of 69

1

A customer has selected Avaya Aura CM_survremote_embedded template. Which Avaya server should be used?

Select one of the following:

S8730 Server 8Gb RAM
S8800 Server
S8510Server with 8GB RAM
S8300D Server

Explanation

Question 57 of 69

1

Which two statements regarding shuffling and hairpining are true? (Choose two)

Select one or more of the following:

Hairpining does not use media processor resources.
The audio connection type field on the communication manager status station formation can be used to determine whether a call is shuffled.
A call between a DCP endpoint and H.323 end point can be shuffled.
Shuffling release media processor resources.

Explanation

Question 58 of 69

1

Which Avaya G450 Module provides 8 DCP ports?

Select one of the following:

MM711
MM712
MM7202
TN2224

Explanation

Question 59 of 69

1

A network failure prevents communication between all the port networks (IPSIs) and there main CM servers. What is the maximum number of port networks (IPSIs) that can be registered to a survivable remote embedded server?

Select one of the following:

no port network
63 port networks
64 port networks
126 port networks

Explanation

Question 60 of 69

1

Which three servers can be upgraded to communication manager Release 6.0? (Choose three)

Select one or more of the following:

S8300C
S8300D
S8510
S8800

Explanation

Question 61 of 69

1

A customer has a communication Manager R6.0 system with IP phones and some older TDM phone, and says there is no dial tone for all of the IP phones. All of the hardware has been verified to be working properly. Which two steps can be taken to identify the cause of problem? (Choose two)

Select one or more of the following:

Verify that the TN2602 Media resources circuit pack has the correct IP settings.
Verify that the processor Ethernet mode is enabled in the Server.
Set a static IP address on a laptop and see if the server can be pined
Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.

Explanation

Question 62 of 69

1

To ensure the communication manager messaging application is working, what are three tests that can be performed? (Choose three)

Select one or more of the following:

Call one of the two stations that you set as subscriber to the messaging server, and let the call go to coverage
Leave message on a covered call and verify that the message waiting indicator (MWI) lamp on the receiving extension is lit.
Call the station and after the call is answered leave a message.
Call the messaging hunt group from any of the stations to ensure it is answering.
Log into communication manager messaging to verify CDOM is running.

Explanation

Question 63 of 69

1

Which statement describes how the communication message application is enabled the first time after the installation?

Select one of the following:

Connect the SAT terminal login using the craft, and then enable using the enable messaging command.
Open the communication manager IP address using web browser. Login as craft, click installation, than communication manager messaging.
Open the communication manager IP address using web browser. Login as craft; click Administration, then server (maintenance), than click miscellaneous, than messaging software, and than click enable
Communication manager messaging is enabled by default after the installation.

Explanation

Question 64 of 69

1

Through which protocols can integration of communication manager messaging application 6.0 with communication manager occur? (Choose two)

Select one or more of the following:

H.323/Q. Sig protocol
RTP protocol
SSP protocol
SIP protocol

Explanation

Question 65 of 69

1

An administrator has just installed a 9620 IP Phones on an existing system. The command change IP network-map is use to administer the phone into to network region 100. All other phones are in network region 1. Like all other 9620 phones on this system, this one successfully gets IP address information fro, the one DHCP server. However, the new phone fails to register with CM. Which two statements describe the cause of the problem? (Choose two)

Select one or more of the following:

Neither PROCR nor CLANs were administered in network region 100
There are no Medpros or H.248 Media Gateways administered in network region 100
Network region 100 is not configured to communicate with other network regions
On the IP interface form, some one recently set the field "Allow H.323 registration" to `n'

Explanation

Question 66 of 69

1

Which statement describes how the licensed mailboxes are enabled on a communication manager messaging application 6.0?

Select one of the following:

Mailboxes are enabled in the communication manager 6.0 license file.
Mailboxes are enabled by a separate license that needs to be generated and deployed.
Mailboxes are enabled by default.
Mailboxes are enabled in the system Parameter features form.

Explanation

Question 67 of 69

1

	Created by AndreCMartinez over 9 years ago

Quiz on Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete), created by AndreCMartinez on 22/03/2015.

Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Question 1 of 69

When troubleshooting a system fault, if the Web Interface or SAT are unavailable, which method should be used?

Select one of the following:

Explanation

Question 2 of 69

Which two series support RAID 5 configuration for CM6.0? (Choose two)

Select one or more of the following:

Explanation

Question 3 of 69

Hunt Group Number 99, with Group Extension 4199, is administered for messaging. Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?

Select one of the following:

Explanation

Question 4 of 69

A customer needs to set up SIP integration on Communication Manager Messaging Application 6.0 What are three pieces of information that are needed to meet this requirement? (Choose three)

Select one or more of the following:

Explanation

Question 5 of 69

Which three are tests that can be performed to verify a Communication Manager Messaging 6.0 application is working properly? (Choose three)

Select one or more of the following:

Explanation

Question 6 of 69

On a Media Gateway G450, which slots are permitted for the MM 342

Select one of the following:

Explanation

Question 7 of 69

A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server. What is the total minimum memory requirement for this upgrade?

Select one of the following:

Explanation

Question 8 of 69

Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?

Select one of the following:

Explanation

Question 9 of 69

Which three statements about CM_Duplex CM 6.0 are true?

Select one or more of the following:

Explanation

Question 10 of 69

Which gateway command resets the Gateway back to factory default?

Select one of the following:

Explanation

Question 11 of 69

A technician wants to test and see if the voice channel between two IP phones. Which command in Site Administration Terminal (SAT) can be used to determine?

Select one of the following:

Explanation

Question 12 of 69

Which Ethernet port on S8800 server is for server duplication?

Select one of the following:

Explanation

Question 13 of 69

Which three commands are a part of Avaya Aura CM_survRemote_Embed templates? (Choose three)

Select one or more of the following:

Explanation

Question 14 of 69

A technician is planning to support to upgrade an Avaya communication Manager system to release 6.0 from release 5.2. Which two tasks must be performed during the upgrade procedure? (Choose two)

Select one or more of the following:

Explanation

Question 15 of 69

In the navigation pane, what are the steps to create a test mailbox on the Communication Manager Messaging 6.0 Application?

Select one of the following:

Explanation

Question 16 of 69

When configuring a G450 Media gateway, which two port settings must be set? (Choose two)

Select one or more of the following:

Explanation

Question 17 of 69

A switch administrator wants to busy out trunk 53 for maintenance and administration work however, there is one call active on port 5 of the trunk. Which command should be extended from the SAT terminal to find out the IP addresses and port of the near-end and far-end node of the auto connection?

Select one of the following:

Explanation

Question 18 of 69

Which three objects can be downloaded from the product license delivery system (PLDS)? (Choose three)

Select one or more of the following:

Explanation

Question 19 of 69

Which two statements describe the new procedures that a customer can use to directly and permanently turn ON or OFF licensed features in CM 6.0? (Choose two)

Select one or more of the following:

Explanation

Question 20 of 69