ashleyhoward
Quiz by , created more than 1 year ago

801 test for studying purposes.

51
0
0
ashleyhoward
Created by ashleyhoward over 9 years ago
Close

801 Lead 2 Pass

Question 1 of 100

1

Which of the following devices is used to convert initially audible signals into digital signals to

provide communication between two endpoints?

Select one of the following:

  • Bridge

  • Fax machine

  • Repeater

  • Modem

Explanation

Question 2 of 100

1

A user has lost connection to the Internet, but can still browse locally shared folders. Which of the

following connections is MOST likely down?

Select one of the following:

  • San

  • Wan

  • Lan

  • Pan

Explanation

Question 3 of 100

1

A technician just finished replacing a laptop screen, and upon first boot notices that the screen

provides a very faint but darkened image which cannot be adjusted. Which of the following was

MOST likely left unplugged after replacement?

Select one of the following:

  • Cmos battery

  • Inverter

  • Dc cord

  • Mini-PCI card

Explanation

Question 4 of 100

1

Which of the following devices requires 3.3V of power from the motherboard?

Select one of the following:

  • SLI video card

  • DVD-ROM Drive

  • Serial port card

  • USB port

Explanation

Question 5 of 100

1

Multicast addresses fall in which of the following classful address ranges?

Select one of the following:

  • Class A

  • Class B

  • Class C

  • Class D

  • Class E

Explanation

Question 6 of 100

1

Which of the following translates digital signals into analog for transmission over phone lines?

Select one of the following:

  • SAN

  • VoIP

  • Modem

  • Bridge

Explanation

Question 7 of 100

1

Which of the following cable types typically transmits the video from an analog security camera

back to the CCTV system?

Select one of the following:

  • Cat 5e

  • Cat 6

  • RG-59

  • STP

Explanation

Question 8 of 100

1

Which of the following cable types should always be used through life safety areas?

Select one of the following:

  • PVC

  • Plenum

  • STP

  • Fiber

Explanation

Question 9 of 100

1

Which of the following 802.11 standards has a MAXIMUM bandwidth throughput of 54Mbps and

uses 2.4GHz frequency?

Select one of the following:

  • A

  • B

  • G

  • N

Explanation

Question 10 of 100

1

A user has 6,250 Megabytes worth of pictures they would like to back up. At the very MINIMUM,

which of the following could backup these pictures to a single medium?

Select one of the following:

  • DL DVD Burner

  • LTO Drive

  • CD Burner

  • Blu-Ray Burner

Explanation

Question 11 of 100

1

Laser printers and thermal printers both use a heating element to function. Which of the following

differentiates them?

Select one of the following:

  • Laser printers requires a liquid pigment

  • Thermal printers use device specific stock.

  • Laser printers do not require thermal toner.

  • Thermal printers utilize refillable heat toner.

Explanation

Question 12 of 100

1

When referring to laser printing, which of the following describes the development process?

Select one of the following:

  • The corona wire places a static charge on the drum.

  • Toner is pulled to the charged areas of the drum.

  • Toner is pulled from the drum to the paper.

  • The toner is permanently affixed to the paper.

Explanation

Question 13 of 100

1

Which of the following would MOST likely be found on a docking station versus a port replicator?

Select one of the following:

  • USB Hub

  • VGA Port

  • Ps/2 Slot

  • Dvd-Rom

Explanation

Question 14 of 100

1

A technician has been tasked with designing a new printing solution for a small team. They want

to be able to use a central printer from their shared workspace as well as the conference room

next door. Which of the following connection methods would BEST suit their need?

Select one of the following:

  • USB

  • Infrared

  • Bluetooth

  • Wireless

Explanation

Question 15 of 100

1

ESD mats are useful for protecting against which of the following hazards?

Select one of the following:

  • Chemical Burns

  • EMI

  • RF interference

  • Static Buildup

Explanation

Question 16 of 100

1

When a technician suspects prohibited activity on an organization's network or computers, which

of the following is the FIRST step they should take?

Select one of the following:

  • Confirm an actual infraction has taken place

  • Confront the suspected person with incident details

  • Notify others so that peers will stop the activity

  • Erase the contents of the user's computer and disable their account

Explanation

Question 17 of 100

1

A customer wants to be able to archive a large 15 to 20 GB project to optical media using a single

disk. Which of the following should a technician recommend?

Select one of the following:

  • Blu-Ray writer

  • DVD-RW drive

  • Dual Layer DVD burner

  • CD-Rom burner

Explanation

Question 18 of 100

1

Which of the following printer types requires calibration to ensure the nozzle is adjusted to print

properly?

Select one of the following:

  • Impact

  • Inkjet

  • Laser

  • Thermal

Explanation

Question 19 of 100

1

A home user's PC has an over-clocked CPU with a relatively small heat sync, small fans on the

800W power supply, and a high-end video card. Which of the following is the recommended

solution that will manage heat more effectively?

Select one of the following:

  • Replace the CPU heat sync with a high RPM fan

  • Purchase an energy efficient power supply

  • Not over-clocking the CPU

  • Liquid cooling

Explanation

Question 20 of 100

1

Which of the following wireless standards operates at 5GHz? (Select TWO).

Select one or more of the following:

  • 802.11a

  • 802.11b

  • 802.11bg

  • 802.11g

  • 802.11n

Explanation

Question 21 of 100

1

A technician is preparing to perform a processor upgrade on a critical company server. Which of

the following precautions should be taken FIRST before performing such work on a system?

(Select TWO).

Select one or more of the following:

  • Discharge all capacitors inside the PSU

  • Remove all jewelry

  • Ensure the PSU is plugged into a grounded electrical socket

  • Ensure humidity levels within the room are lowered

  • Put on an anti-static wrist strap

Explanation

Question 22 of 100

1

Which of the following devices uses both light and a lens to facilitate data warehousing?

Select one of the following:

  • Digitizer

  • Touch screen

  • Bar code reader

  • Camera

Explanation

Question 23 of 100

1

Activity logs show a large amount of data downloaded from a company server to an employee's

workstation overnight. Upon further investigation, the technician identifies the data as being

outside the scope of the employee's regular job functions. Which of the following steps should the

technician take NEXT?

Select one of the following:

  • Report through proper channels

  • Document the changes

  • Continue to track more evidence

  • Preserve the chain of custody

Explanation

Question 24 of 100

1

Which of the following supports a MAXIMUM frequency of 100MHz?

Select one of the following:

  • Cat5

  • Cat5e

  • Cat6

  • Cat6a

Explanation

Question 25 of 100

1

A brand new datacenter has been wired with all CAT6a wiring. A technician has been tasked to

immediately install and boot up an already configured mission critical file server. Prior to turning

the server on, the technician realizes that they had brought CAT5e patch cords by mistake.

Which of the following should the technician do?

Select one of the following:

  • Install the CAT5e cable, boot the server and then return and replace it later

  • Inform the customer and recommend temporarily using the Cat5e

  • Install the Cat5e cable, document the installation and leave the premises.

  • Inform the customer that the server will be available as soon as a Cat6a cable is aquired

Explanation

Question 26 of 100

1

Which of the following helps law enforcement show accountability for evidence as it was

gathered?

Select one of the following:

  • Drive hashing

  • Chain of custody

  • Drive image creation

  • Court Subpoena

Explanation

Question 27 of 100

1

A SOHO environment utilizes network hardware address filtering to minimize unauthorized use of

its network infrastructure. A technician has been asked to install a shared network printer in the

environment. Which of the following MUST the technician know in order to add the printer to the

environment?

Select one of the following:

  • IP address of the printer

  • Mac address of the printer

  • Subnet mask of the network

  • Firmware version of the printer

Explanation

Question 28 of 100

1

A technician has been asked to install a printer on a Windows XP machine. Through which of the following Control Panel utilities will the technician install the printer?

Select one of the following:

  • Printers and devices

  • Devices and printers

  • Printers and faxes

  • Devices

Explanation

Question 29 of 100

1

A technician has been asked to install a printer on a Windows 7 machine. Through which of the

following Control Panel utilities will the technician install the printer?

Select one of the following:

  • Printers and devices

  • Printers

  • Devices and printers

  • Printers and faxes

Explanation

Question 30 of 100

1

A technician has been asked to share a laser printer amongst the users in an HR workgroup. The

printer will need to be accessed from distances up to 200 feet through no more than one to two,

hollow, dry board walls. Which of the following methods should be used?

Select one of the following:

  • 802.11x

  • Pan

  • USB

  • Infrared

Explanation

Question 31 of 100

1

A technician has been asked to identify the unknown network addresses from a series of printers

attached to the network via external hardware printer servers. Which of the following will provide

the technician with the necessary information?

Select one of the following:

  • Performing a device self test print page from each printer

  • Performing a device print page from each print server

  • Performing a device factory reset on each print server

  • Performing a PING of each device address without the FQDN

Explanation

Question 32 of 100

1

RAID 5 requires a minimum of how many hard drives?

Select one of the following:

  • 1

  • 2

  • 3

  • 4

Explanation

Question 33 of 100

1

When installing a floppy drive data cable, it is important for a technician to ensure which of the

following? (Select TWO).

Select one or more of the following:

  • Availability of compatible power connections

  • Adequate hard drive capacity

  • Correct CPU clock speeds

  • Correct Master/Slave jumper settings

  • Proper orientation of the data cable

Explanation

Question 34 of 100

1

A laser multi-function device in an office is able to scan documents, but users are reporting that

when they try to make copies they receive an error. Which of the following troubleshooting steps

should a technician try FIRST?

Select one of the following:

  • Apply a new preventative maintenance kit

  • Ensure the MFD is connected and on the network

  • Replace all empty ink cartridges in the MFD

  • Check the toner level to see if it is low

Explanation

Question 35 of 100

1

When installing a laptop at a desk that will be using stationary dual monitors, which of the

following ports should be used? (Select TWO).

Select one or more of the following:

  • VGA

  • IEEE 1394

  • PCIe

  • PCMCIA

  • Express port

  • HDMI

Explanation

Question 36 of 100

1

Which of the following is the maximum throughput of a USB 3.0 connection?

Select one of the following:

  • 800 Mbps

  • 3 Gbps

  • 4.8 Gbps

  • 10 Gbps

Explanation

Question 37 of 100

1

Which of the following types of connectors can use a maximum of 8 strands of wires?

Select one of the following:

  • RJ-11

  • RS-232

  • RJ-45

  • BNC

Explanation

Question 38 of 100

1

A system board has six slots for memory chips, aligned in two banks. Which of the following is the

optimal memory configuration this board supports?

Select one of the following:

  • Multi mode

  • Dual channel

  • Triple channel

  • Single channel

Explanation

Question 39 of 100

1

A technician is trying to install a full-size PCI card into a slim line desktop PC. Which of the

following would MOST likely be required to facilitate installation?

Select one of the following:

  • RAID card

  • CNR card

  • Riser card

  • MCA card

Explanation

Question 40 of 100

1

Which of the following network cable types has the longest range?

Select one of the following:

  • CAT5e

  • Single-mode fiber

  • Multi-mode fiber

  • CAT6

Explanation

Question 41 of 100

1

A technician is asked to repair a broken Ethernet jack in a conference room. Which of the

following tools would the technician use when repairing the wall jack?

Select one of the following:

  • Crimper

  • Toner probe

  • Punchdown tool

  • Multimeter

Explanation

Question 42 of 100

1

A user with a USB printer would like to print from more than one computer. Which of the following

features should be used?

Select one of the following:

  • File and printer sharing

  • Internet connection sharing

  • Enable printer duplexing

  • USB Hub

Explanation

Question 43 of 100

1

Which of the following is the MAXIMUM number of 10Mb audio files that a user can store on a

CD- RW?

Select one of the following:

  • 50

  • 70

  • 100

  • 120

Explanation

Question 44 of 100

1

Which of the following connectors provides the capability to pass both analog and digital signals?

Select one of the following:

  • VGA

  • BNC

  • DVI-I

  • USB 3.0

Explanation

Question 45 of 100

1

A service call was opened for a thermal printer that has poor print quality. Which of the following

should the technician do FIRST?

Select one of the following:

  • Replace the print head with OEM replacement

  • Use a cotton swab and alcohol to clean the print head

  • use the printer manufacturers cleaning kit to clean the print head

  • Use an industry approved cleaning kit to clean the print rollers

  • Use the printer manufactures cleaning kit to clean the print rollers

Explanation

Question 46 of 100

1

A technician needs to attach a network cable to a wall jack in the conference room. After running

the cable through the conduit to the conference room, which of the following tools would BEST be

used to connect the cable to the wall jack?

Select one of the following:

  • Punchdown

  • Loopback plug

  • Multimeter

  • Crimper

Explanation

Question 47 of 100

1

Which of the following devices uses MAC tables to allow multiple computers to access a single

network connection?

Select one of the following:

  • Hub

  • Firewall

  • VoIP

  • Switch

Explanation

Question 48 of 100

1

Which of the following laser printer components will flip the paper to allow for printing on both

sides?

Select one of the following:

  • Paper registration assembly

  • Paper pickup assembly

  • Duplex assembly

  • Image transfer belt

Explanation

Question 49 of 100

1

A printer technician is sent to work on a fuser in a laser printer that is not adhering toner properly

to the paper. While onsite Joe, an end user, reports that he has been having frequent paper jams

as well. Which of the following would be the BEST course of action to repair the printer?

Select one of the following:

  • Install a manufacturer recommended maintenance kit

  • Install the fuser, replace the toner cartridge, and replace the pickup and separation rollers

  • Install the fuser and also replace the high voltage power supply

  • Install the fuser as the paper jams were probably also caused by the defective fuser

Explanation

Question 50 of 100

1

Which of the following is used to provide secure file storage to network users only?

Select one of the following:

  • NAS

  • IMAP

  • SAN

  • SSH

Explanation

Question 51 of 100

1

A technician has replaced the NIC in a computer running Windows XP Professional and has

properly installed the device driver. The computer indicates the card has network connectivity, but

the technician is unable to access the Internet. Which of the following should the technician do

NEXT to finish the NIC installation?

Select one of the following:

  • Change the computer and DNS servers IP addresses in the Action Center

  • Use ipconfig to check the current settings and Network Connections to make changes

  • Assign the NIC an APIPA address using ipconfig and the network setup wizard

  • Reboot the computer and configure the necessary network settings in the BIOS

Explanation

Question 52 of 100

1

Which of the following Internet connection types has the HIGHEST latency?

Select one of the following:

  • WIMAX

  • Satellite

  • Fiber

  • Dial-up

Explanation

Question 53 of 100

1

Which of the following would BEST describe the capabilities of a 64-bit operating system?

Select one of the following:

  • Capable of managing dual NICs

  • Capable of effectively managing 1TB SSD

  • Capable of managing more than 4 displays

  • Capable of utilizing 128Gb RAM

Explanation

Question 54 of 100

1

Joe, a user, wants to modify the fan speed settings on his PC. Which of the following locations

allows the fan speed settings to be changed?

Select one of the following:

  • BIOS

  • Device manager

  • Motherboard jumpers

  • Computer management

Explanation

Question 55 of 100

1

A user has purchased a new touch screen tablet and is reporting that the touch interface is

extremely inaccurate and almost unusable. Which of the following actions should a technician

take FIRST to resolve the issue?

Select one of the following:

  • Return the tablet to the manufacturer

  • Give the user a stylus to use

  • Calibrate the touch interface

  • Verify touch interface connectivity inside the screen

Explanation

Question 56 of 100

1

A technician needs to install a projector into a conference room with several windows. Which of

the following should the technician consider so that the displayed image is always visible?

Select one of the following:

  • Resolution

  • Lumens

  • Anti-Glare filter

  • Bulb life

Explanation

Question 57 of 100

1

A common method of accessing computers remotely that uses port 23 is known as?

Select one of the following:

  • LDAP

  • RDP

  • Telnet

  • FTP

Explanation

Question 58 of 100

1

Which of the following allows for audio and video connections using a single cable?

Select one of the following:

  • HDMI

  • Parallel

  • DVI-A

  • eSATA

Explanation

Question 59 of 100

1

Which of the following standards is an expansion card slot used only for graphics?

Select one of the following:

  • PCIe

  • AGP

  • PCI

  • miniPCI

Explanation

Question 60 of 100

1

A technician, Anne, has repaired a CEO's laptop. Which of the following is the LAST step that

should be taken after the repair is completed?

Select one of the following:

  • Prepare a hot spare in preparation for the next repair

  • Document all of the services provided

  • Communicate the status of the repair with the CEO

  • Offer other repair options if they are available

Explanation

Question 61 of 100

1

Modern laptop screens are much brighter because of advances in which of the following

technologies?

Select one of the following:

  • LED

  • Batteries

  • Inverter

  • Plasma

Explanation

Question 62 of 100

1

A technician, Anne, notices there are no hardware volume control buttons on the new laptops that

were ordered. Which of the following would control the volume on the laptop?

Select one of the following:

  • Software only

  • Bluetooth

  • Function keys

  • WIFI switch

Explanation

Question 63 of 100

1

A technician wants to simplify users' wireless configuration in a new remote office. Which of the

following must be configured on the access point to allow wireless clients to automatically

negotiate secure authentication with the SOHO access point?

Select one of the following:

  • Enable QoS

  • Enable SSID Broadcast

  • Enable WPS

  • Enable MAC filtering

Explanation

Question 64 of 100

1

Ann, a technician, is inspecting a PC with an Intel Core 2 Quad processor and finds that the Task

Manager is reporting the system as having 8 cores. She is convinced this system only has four

cores. Which of the following technologies is causing the discrepancy?

Select one of the following:

  • Hyperthreading

  • Intel SSE3

  • L2 cache

  • S.M.A.R.T

Explanation

Question 65 of 100

1

Which of the following cable types designates that it can safely be run through a drop ceiling?

Select one of the following:

  • STP

  • Plenum

  • CAT5e

  • UTP

Explanation

Question 66 of 100

1

A technician is installing new hard drives into a server and needs to set IDs to numbers ranging

from 0-15. Which of the following types of drives is the technician installing?

Select one of the following:

  • Sata

  • SCSI

  • USB

  • EIDE

Explanation

Question 67 of 100

1

By default, which of the following ports is used for SMTP?

Select one of the following:

  • 21

  • 25

  • 110

  • 143

Explanation

Question 68 of 100

1

A small office with five computers on a workgroup that are directly connected to a switch is an

example of which of the following network topologies?

Select one of the following:

  • Ring

  • Bus

  • Mesh

  • Star

Explanation

Question 69 of 100

1

Joe would like an Internet connection that is always on, stable, and not influenced by atmospheric

conditions. Which of the following Internet connection types would BEST meet Joe's

requirements?

Select one of the following:

  • Dial-up

  • Mobile Hotspot

  • Satellite

  • cable

Explanation

Question 70 of 100

1

A customer is terminating an employee for suspected activity that is against company policy.

They have called Ann to consult with them on how to best preserve any evidence the company

may be required to provide in court. Which of the following would BEST preserve the integrity of

the data and best serve the client?

Select one of the following:

  • Create an image of the hard drive and store it on a NTFS drive

  • Remove and secure any HDD from the computer, documenting the process

  • Store the computer in the server room until it is required

  • Lock the user out of the computer and let another employee use it until needed

Explanation

Question 71 of 100

1

Which of the following wireless standards operates at 5 GHz and has a maximum speed of 54

Mbps?

Select one of the following:

  • 802.11a

  • 802.11b

  • 802.11g

  • 802.11n

Explanation

Question 72 of 100

1

Ann, a user, brings her laptop in and reports that it is no longer charging. Additionally, the laptop

can no longer stay powered on even when plugged in. Which of the following hardware

components is MOST likely in need of replacement?

Select one of the following:

  • Hard drive

  • Memory modules

  • System fan

  • Wireless card

  • System board

Explanation

Question 73 of 100

1

Joe, a user, has a new slim profile laptop and is in need of additional USB ports. He has also

requested FireWire connection capabilities which his laptop does not provide. Which of the

following would BEST fit the specifications Joe has provided?

Select one of the following:

  • A docking station

  • An external USB hub

  • A USB to firewire converter

  • A cable lock

Explanation

Question 74 of 100

1

Ann is cleaning the printer pickup rollers and spills the cleaning fluid on her leg. In which of the

following would she find the proper way to cleanup the spill?

Select one of the following:

  • Inventory spreadsheet

  • MSDS

  • Project management plan

  • EULA

Explanation

Question 75 of 100

1

Which of the following is the MAXIMUM number of unique IP addresses on an IPv4 Class A

network?

Select one of the following:

  • 254

  • 65 thousand

  • 16.3 million

  • 340 trillion

Explanation

Question 76 of 100

1

Which of the following is an advantage of an IPv6 network?

Select one of the following:

  • Virtually unlimited number of network addresses

  • Backwards compatible with all network devices and operating systems

  • less security concerns

  • higher available speed

Explanation

Question 77 of 100

1

Which of the following connection types is capable of transmissions speeds up 100 Gbps?

Select one of the following:

  • Fiber

  • Coaxial

  • Infrared

  • DSL

Explanation

Question 78 of 100

1

Which of the following wireless transmission methods requires line of sight?

Select one of the following:

  • Infrared

  • RFID

  • 802.11a

  • Bluetooth

Explanation

Question 79 of 100

1

Joe's company just moved into a new building, and the company's management is very

concerned about proper equipment grounding. Which of the following risks are they attempting to

mitigate by grounding equipment?

Select one of the following:

  • Security breaches

  • Electrical shock

  • Chemical burns

  • Equipment theft

Explanation

Question 80 of 100

1

A user has a CAD / CAM workstation that is to be reconfigured into a Gaming PC. Which of the

following would be the EASIEST and MOST effective upgrade?

Select one of the following:

  • Add better sound card

  • Install a TV Tuner

  • Add additional L2 cache

  • Install USB 3.0 Card

Explanation

Question 81 of 100

1

Which of the following would be used to connect two remote sites?

Select one of the following:

  • Switch

  • Access point

  • Router

  • hub

Explanation

Question 82 of 100

1

A bank wants to maximize the security of employee computer data displayed on their screen.

Which of the following would BEST accomplish these goals?

Select one of the following:

  • Keyboard filters

  • Privacy filters

  • Screensavers

  • Secure display drivers

Explanation

Question 83 of 100

1

Which of the following cable types is used to transmit data from a satellite dish to the satellite

modem?

Select one of the following:

  • CAT5e

  • CAT3

  • Fiber

  • RG-6

Explanation

Question 84 of 100

1

A customer needs to run several virtual machines on their design workstation to work on cross

platform software. Which of the following should be maximized to improve workstation

performance? (Select TWO)

Select one or more of the following:

  • Cooling fans

  • RAM

  • Number of CPU cores

  • Storage space

  • PCIe slots

Explanation

Question 85 of 100

1

Older video cards used S-video to output to a TV. This standard has been replaced by:

Select one of the following:

  • FireWire

  • SCSI

  • coaxial

  • HDMI

Explanation

Question 86 of 100

1

Which of the following is the BEST approach a technician should take when informing a customer

about their findings of any specific computer problem?

Select one of the following:

  • Use non-technical terms

  • Use the appropriate acronyms

  • Use proper technical terms

  • Use email to ensure a written record

Explanation

Question 87 of 100

1

Most notebook PCs have their WiFi antenna located in the:

Select one of the following:

  • LCD

  • WIFI card

  • I/O area

  • top cover

Explanation

Question 88 of 100

1

Which of the following displays has the HIGHEST Hz frequency?

Select one of the following:

  • Plasma

  • LED

  • CRT

  • LCD

Explanation

Question 89 of 100

1

Which of the following devices can be used to merge traffic between two different network

topologies?

Select one of the following:

  • HUB

  • Bridge

  • Switch

  • Access point

Explanation

Question 90 of 100

1

A gaming PC has been built from components. The system is getting power but there is no video

on the display. Which of the following is the MOST likely cause of the issue?

Select one of the following:

  • The display is defective and needs to be replaced

  • the SATA controller is disabled in the bios

  • The PCIe 6-pin power cable is not connected to the high-end video card

  • The CPU is not powerful enough to provide adequate speed to the system

Explanation

Question 91 of 100

1

Which of the following RAM types is used if it is labeled as 4 GB PC1333?

Select one of the following:

  • Rambus

  • DDR3

  • SDIMM

  • SIM

Explanation

Question 92 of 100

1

Which of the following versions of Windows XP would a technician MOST likely install for a small

business?

Select one of the following:

  • Windows XP professional 64- bit

  • Windows XP professional

  • Windows XP media center

  • Windows XP home

Explanation

Question 93 of 100

1

Which of the following is the subnet mask for a Class A IP address?

Select one of the following:

  • 127.0.0.1

  • 255.0.0.0

  • 255.255.255.0

  • 255.255.255.254

Explanation

Question 94 of 100

1

Which of the following BEST explains how the data rate is doubled in DDR RAM?

Select one of the following:

  • CPU clock speed is doubled

  • Uses 64-bit instead of 32-bit architecture

  • Memory clock speed is doubled

  • Data transfer on both clock edges

Explanation

Question 95 of 100

1

A technician is building a custom gaming computer. Which of the following is the FASTEST memory the technician can use?

Select one of the following:

  • DDR2 CAS7

  • DDR3 CAS9

  • DDR3 CAS10

  • DDR3 CAS11

Explanation

Question 96 of 100

1

A customer needs to run 3 virtual machines on their software design workstation. Which of the following CPUs would be MOST cost effective for this task?

Select one of the following:

  • 3 core

  • 4 core

  • 8 core

  • 12 core

Explanation

Question 97 of 100

1

An older laptop does not have WIFI capability but has some rectangular slots on its side. Which of the following is the port that would take a WI-FI card in this laptop?

Select one of the following:

  • SODIMM

  • PCMCIA

  • SD

  • Compact flash

Explanation

Question 98 of 100

1

A technician has a work order to install a USB 3.0 expansion card into a PC. The expansion card

is a PCI Express 1.1 compliant card and the motherboard has one PCI Express 2.0 slot available.

Which of following BEST represents the compatibility between the hardware?

Select one of the following:

  • It will not install correctly, and the PCI slot is already being used by the video card.

  • It will install correctly to the PCI express slot onto the motherboard. The card should function correctly, as the PCI express 2.0 slot Is backwards compliant.

  • It will not install correctly into the PC, as the 1.1 and 2.0 slots are not compatible.

  • It will install correctly, but the card will not operate as the PCI express 1.1 and the PCI express 2.0 standards are completely different.

Explanation

Question 99 of 100

1

A user is trying to use Remote Desktop to connect to another computer on the LAN. The

connection fails. The technician opens up a command prompt and types the followinG. "telnet

computer name. 3389" and also gets the same error message. Which of the following is the

MOST likely cause of this error, assuming that the OS firewall has been disabled?

Select one of the following:

  • The antivirus software is blocking the incoming connection.

  • The ISP is blocking Remote Desktop at their end

  • the RDP connection has been configured to use a non-standard port

  • The telnet service has not been installed

Explanation

Question 100 of 100

1

Which of the following is the standard sequence of wire color in a RJ-11 phone line?

Select one of the following:

  • Green, Black, Yellow, Red

  • Black, red, green, yellow

  • Yellow, black, red , green

  • Red, black, green , yellow

Explanation

Previous
Next