Thermo Loads are
Loads caused by piping and equipment attached to the pressure vessel are transferred to the vessel, by nozzles
loads are transient and, when the occur, can result In the production of vibratory forces
The design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
Pressure vessels located outdoors have additional stresses imposed by wind.
The ______ code uses area replacement as the basis for reinforcement calculations
csa b51
csa b52
asme
wleders
Design pressure is
a higher pressure than the operating pressure and is used to determine the minimum required thickness for the pressure vessel
the minimum required pressure
equal to the operating pressure
1.5 times the maximum working pressure
Attachment loads are
Loads caused by piping and equipment attached to the pressure vessel and transferred to the vessel by nozzles
loads are transient, and when they occur can result in the production of vibratory forces
the design temperature for a vessel is the expected normal operating temperature, with some factor of safety included
pressure vessels located outdoors have additional stresses imposed by wind
Routine ________ is the key to maximizing the production and life of pressure vessels
testing
operations
shutdowns
maintenance
___________ ______ are leak proof containers that have an internal or external operating pressure
pressure vessels
Fired boilers
Fractionation towers
Milk cartons
Seismic loads are:
loads are transient and, when they occur, can result in the production of vibratory forces
It is standard practice to __________ an opening with the same cross-sectional area that was removed.
make
reinforce
cut
replace
The primary hazard in __________ testing is the amount of energy stored in the compressed gas during the test.
hydrostatic
pneumatic
radiography
mag particle
