70-410 Microsoft Exam: Test 1 - Volume 2

Please wait - loading…

Question 1 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.

You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).

You need to enable SR-IOV for all of the virtual machines on Server1.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

Select one of the following:

On each virtual machine, modify the Advanced Features settings of the network adapter.
Modify the settings of the RDS Virtual virtual switch.
On each virtual machine, modify the BIOS settings.
Delete, and then recreate the RDS Virtual virtual switch.
On each virtual machine, modify the Hardware Acceleration settings of the network adapter.

Explanation

Question 2 of 47

Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the picture.

VM3 is used to test applications.

You need to prevent VM3 from synchronizing its clock to Server1.

What should you configure?

Select one of the following:

NUMA topology
Resource control
Resource metering
Virtual Machine Chimney
The VLAN ID
Processor Compatibility
The startup order
Automatic Start Action
Integration Services
Port mirroring

Explanation

Question 3 of 47

You have a server named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.

You need to ensure that the feature can be installed on Server1.

What should you do?

Select one of the following:

Install Windows Identity Foundation (WIF) 3.5.
Install the Web Server (IIS) server role.
Connect Server1 to the Internet.
Run the Add-AppxProvisionedPackage cmdlet.

Explanation

Question 4 of 47

You have a server named Server1 that runs Windows Server 2012 R2.

You need to enable access-based enumeration for a file share on Server1.

Which tool should you use?

Select one of the following:

File Server Resource Manager (FSRM)
Share and Storage Management
Server Manager
File Explorer

Explanation

Question 5 of 47

You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.

You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Picture 1.)

You review the installed features on Server1 as shown in the Features exhibit. (Picture 2.)

You need to install the Server Graphical Shell feature on Server1.

Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

Select one or more of the following:

Index 1
Index 2
Index 3
Index 4

Explanation

Question 6 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.

Server2 establishes an IPSec connection to Server1.

You need to view which authentication method was used to establish the initial IPSec connection.

What should you do?

Select one of the following:

From Windows Firewall with Advanced Security, view the quick mode security association.
From Event Viewer, search the Application Log for events that have an ID of 1704.
From Event Viewer, search the Security Log for events that have an ID of 4672.
From Windows Firewall with Advanced Security, view the main mode security association.

Explanation

Question 7 of 47

Your network contains an Active Directory domain named contoso.com. The domain

contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on Hyperv1.

Users report that the time on their client computer is incorrect.

You log on to DC1 and verify that the time services are configured correctly.

You need to prevent time conflicts between the time provided by DC1 and other potential time sources.

What should you configure?

To answer, select the appropriate object in the answer area.

Select one of the following:

Network Adapter
BIOS
Processor
Integration Services
Automatic Start Action
Smart Paging File Location
Snapshot File Location

Explanation

Question 8 of 47

You have a server named DHCP1 that runs Windows Server 2012 R2. DHCP1 does not have access to the Internet.

All roles are removed completely from DHCP1.

You mount a Windows Server 2012 R2 installation image to the C:\Mount folder.

You need to install the DHCP Server server role on DHCP1 by using Server Manager.

Which folder should you specify as the alternate path for the source files?

To answer, select the appropriate folder in the answer area.

Select one of the following:

WinSxS
Web
System
Setup
System32
schema
Resources
servicing
TAPI
SysWOW64

Explanation

Question 9 of 47

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2 Datacenter.Server1 is located in an isolated network that cannot access the Internet.

On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012 R2 Essentials and connects to a private virtual network.

After 30 days, you discover that VM1 shuts down every 60 minutes.

You need to resolve the issue that causes VM1 to shut down every 60 minutes.

What should you do?

Select one of the following:

OnVM1, run slmgr.exe and specify the /ipk parameter.
OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
Create a new internal virtual network and attach VM1 to the new virtual network.
On Server1, run Add-WindowsFeatureVolumeActivation.

Explanation

Question 10 of 47

You have a server named Server1 that runs Windows Server 2012 R2.

Server1 has following storage spaces:

1) Data
2) Users
3) Backups
4) Primordial

You add an additional hard disk to Server1.

You need to identify which storage space contains the new hard disk.

Which storage space contains the new disk?

Select one of the following:

Data
Backups
Users
Primordial

Explanation

Question 11 of 47

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.

You need to configure a local Group Policy on Server1 that will apply only to non- administrators.

Which tool should you use?

Select one of the following:

Group Policy Object Editor
Group Policy Management
Group Policy Management Editor
Server Manager

Explanation

Question 12 of 47

Your network contains an Active Directory domain named contoso.com.

An administrator provides you with a file that contains the information to create user accounts for 200 temporary employees. The file is shown in the exhibit. (Picture.)

You need to automate the creation of the user accounts. You must achieve this goal by using the minimum amount of administrative effort.

Which tool should you use?

Select one of the following:

Ldifde
csvde
Dsadd
Net user

Explanation

Question 13 of 47

Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.

You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.

You want to achieve this goal by using the minimum amount of administrative effort.

Which command should you run first?

Select one of the following:

dism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration
dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
imagex.exe /capture c: c:\Server12.wim "windows server 2012 r2 datacenter"
imagex.exe /apply c:\Server12.wim 4 c:\

Explanation

Question 14 of 47

You have a new server named Server1 that runs Windows Server 2012 R2.

Server1 has two dual-core processors and 32 GB of RAM.

You install the Hyper-V server role on Server1.

You create two virtual machines on Server1 that each have 8 GB of memory.

You need to minimize the amount of time it takes for both virtual machines to access memory.

What should you configure on each virtual machine?

Select one of the following:

Resource control
Memory weight
Dynamic Memory
NUMA topology

Explanation

Question 15 of 47

Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1.

When you run ping dc1.corp.contoso.com, you receive the result as shown in the exhibit. (Picture1)

You need to ensure that DC1 can respond to the Ping command.

Which rule should you modify? (picture2)

To answer, select the appropriate rule in the answer area.

Select one of the following:

Explanation

Question 16 of 47

You have a server named Server1 that runs Windows Server 2012 R2.

You add an additional disk to Server1 as shown in the exhibit. (Picture)

You need to ensure that users can access the additional disk from drive C.

What should you do?

Select one of the following:

Convert Disk 0 to a dynamic disk and add a mirror.
Create a simple volume on Disk 1 and mount the volume to a folder.
Convert Disk 0 and Disk 1 to dynamic disks and extend a volume.
Convert Disk 1 to a dynamic disk and create a spanned volume.

Explanation

Question 17 of 47

You have a server that runs a Server Core installation of Windows Server 2012 R2.

You need to change the DNS server used by IPv6.

What should you do?

Select one of the following:

From Sconfig, configure the Network Settings.
Run the sc.exe command and specify the config parameter.
From Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.

Explanation

Question 18 of 47

You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.

You need to add a graphical user interface (GUI) to Server1.

Which tool should you use?

Select one of the following:

The setup.exe command
The dism.exe command
The imagex.exe command
The Add-WindowsPackage cmdlet

Explanation

Question 19 of 47

You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed.

You open DNS Manager as shown in the exhibit. (Picture)

You need to view the DNS server cache from DNS Manager.

What should you do first?

Select one of the following:

From the View menu, click Filter...
From the Action menu, click Configure a DNS Server...
From the Action menu, click Properties.
From the View menu, click Advanced.

Explanation

Question 20 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server that runs Windows Server 2012 R2.

You perform a Server Core Installation of Windows Server 2012 R2 on a new server.

You need to ensure that you can add the new server to Server Manager on Server1.

What should you configure on the new server? To answer, select the appropriate setting in the answer area.

Select one of the following:

Explanation

Question 21 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that runs Windows Server 2012 R2.

On Server1, you create a work folder named Work1.

A user named User1 connects to Work1 from a computer named Computer1.

You need to identify the last time the documents in Work1 were synchronized successfully from Computer1.

What should you do?

Select one of the following:

From Server Manager, review the properties of Computer1.
From Windows PowerShell, run the Get-SyncUserSettingscmdlet.
From Windows PowerShell, run the Get-SyncSharecmdlet.
From Server Manager, review the properties of User1.

Explanation

Question 22 of 47

You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.

From Windows PowerShell, you run the following command:

Remove-WindowsFeature ServerGui-Shell.

In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1.

Make only one selection in each row. Each correct selection is worth one point.

Select one or more of the following:

Available: File Explorer
Available: Internet Explorer 10
Available: Microsoft Management Console (MMC)
Available: Server Manager
Unavailable: File Explorer
Unavailable: Internet Explorer 10
Unavailable: Microsoft Management Console (MMC)
Unavailable: Server Manager

Explanation

Question 23 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2.

Print1 has 50 shared printers. Each printer is listed in Active Directory.

From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible.

You need to ensure that you can view the printer objects in Active Directory Users and Computers.

Which option should you select?

Select one of the following:

Large Icons
Small Icons
List
Detail
User, Contacts, Groups, and Computers as containers
Advances Features
Filter Options...
Customize...

Explanation

Question 24 of 47

You have a server that runs Windows Server 2012 R2.

The disks on the server are configured as shown in the exhibit. (Picture)

You need to create a storage pool that contains Disk 1 and Disk 2.

What should you do first?

Select one of the following:

Delete volume E
Convert Disk 1 and Disk 2 to dynamic disks
Convert Disk 1 and Disk 2 to GPT disks
Create a volume on Disk 2

Explanation

Question 25 of 47

You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

You need to implement NIC teaming on Server1.

Which two network connections should you include on the NIC team? (To answer, select the two appropriate network connections in the answer area.)

Select one or more of the following:

NIC1
NIC2
NIC3
vEthernet(Broadcom NetXtreme Gigabit Ethernet - Virtual Switch)

Explanation

Question 26 of 47

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.

Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.

VM1 has several snapshots.

You need to modify the snapshot file location of VM1.

What should you do?

Select one of the following:

Delete the existing snapshots, and then modify the settings of VM1.
Right-click VM1, and then click Move. ..
Right-click VM1, and then click Export...
PauseVM1, and then modify the settings of VM1.

Explanation

Question 27 of 47

You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.

You need to create an IPv6 reservation for Server2.

Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)

Select one or more of the following:

the hardware ID
the DHCPv6 unique identifier
the DHCPv6 identity association ID
the SMSBIOS GUID
the MAC address

Explanation

Question 28 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.

On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.

You need to ensure that you can manage Server2 by using the Computer Management console on Server1.

What should you do on Server2?

Select one of the following:

Install Windows Management Framework.
Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
Install Remote Server Administration Tools (RSAT).
Run sconfig.exe and configure remote management.

Explanation

Question 29 of 47

Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains one domain. A two-way forest trust exists between the forests.

The forests use the address spaces shown in the following table. (Picture)

From a computer in the contoso.com domain, you can perform reverse lookups for the servers in the contoso.com domain, but you cannot perform reverse lookups for the servers in the adatum.com domain.

From a computer in the adatum.com domain, you can perform reverse lookups for the servers in both domains.

You need to ensure that you can perform reverse lookups for the servers in the adatum.com domain from the computers in the contoso.com domain.

What should you create?

Select one of the following:

A trust point
A GlobalNames zone
A delegation
A conditional forwarder

Explanation

Question 30 of 47

Your network contains an Active Directory domain named contoso.com.

Your company hires 500 temporary employees for the summer.

The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees.

You need to automate the creation of user accounts for the 500 temporary employees.

Which tool should you use?

Select one of the following:

ADSI Edit
The csvde.exe command
Active Directory Users and Computers
The Add-Member cmdlet

Explanation

Question 31 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains hundreds of groups, many of which are nested in other groups.

The domain contains a user account named user1.User1 is a direct member of 15 groups.

You need to identify of which Active Directory groups User1 is a member, including the nested groups. The solution must minimize administrative effort.

Which tool should you use?

Select one of the following:

Active Directory Users and Computers
ADSI Edit
Get-ADUser
Dsget

Explanation

Question 32 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1 in Active Directory.

You need to provide a group named Group1 with the ability to manage Printer1.

What should you do?

Select one of the following:

From Print Management, configure the Sharing settings of Printer1.
From Active Directory Users and Computers, configure the Security settings of Server1- Printer1.
From Print Management, configure the Security settings of Printer1.
From Print Management, configure the Advanced settings of Printer1.

Explanation

Question 33 of 47

Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server named DHCP1.

You add a new network segment to the network.

On the new network segment, you deploy a new server named Server1 that runs Windows Server 2012 R2.

You need to configure Server1 as a DHCP Relay Agent.

Which server role should you install on Server1? (see picture)

To answer, select the appropriate role in the answer area.

Select one of the following:

Active Directory Federation Services
Active Directory Lightweight Directory Services
Application Server
DHCP Server
DNS Server
File and Storage Services
Hyper-V
Network Policy and Access Services
Remote Access
Remote Desktop Services

Explanation

Question 34 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.

You create a group Managed Service Account named gservice1.

You need to configure a service named Service1 to run as the gservice1 account.

How should you configure Service1?

Select one of the following:

From the Services console, configure the General settings.
From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
From a command prompt, run sc.exe and specify the config parameter.
From a command prompt, run sc.exe and specify the privs parameter.

Explanation

Question 35 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

You need to create a 3-TB virtual hard disk (VHD) on Server1.

Which tool should you use?

Select one of the following:

Computer Management
Server Manager
Share and Storage Management
New-VirtualDisk

Explanation

Question 36 of 47

Your network contains an Active Directory domain named contoso.com.

You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.

You need to ensure that you can view processor usage and memory usage information in Server Manager.

What should you do?

Select one of the following:

From Server Manager, click Configure Performance Alerts.
From Performance Monitor, create a Data Collector Set (DCS).
From Performance Monitor, start the System Performance Data Collector Set (DCS).
From Server Manager, click Start Performance Counters.

Explanation

Question 37 of 47

Your network contains an Active Directory domain named contoso.com.

The password policy for the domain is set to require a minimum password length of 10 characters.

A user named User1 and a user named User2 work for the sales department.

User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters.

You need to identify what forces the two users to have different password lengths.

Which tool should you use?

Select one of the following:

Credential Manager
Security Configuration Wizard (SCW)
Group Policy Management
Active Directory Administrative Center

Explanation

Question 38 of 47

You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table. (see picture)

You need to ensure that Server2 can be managed by using Server Manager from Server1.

In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.

Select one or more of the following:

Server1: Modify the TrustedHost list.
Server1: Set the network profile to Private
Server2: Modify the TrustedHost list.
Server2: Set the network profile to Private
Server1: Override the User Account Control (UAC) restrictions by using the LocalAccountTokenFilterPolicy registry entry
Server2: Override the User Account Control (UAC) restrictions by using the LocalAccountTokenFilterPolicy registry entry

Explanation

Question 39 of 47

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.Client computers run either Windows 7 or Windows 8.

All of the computer accounts of the client computers reside in an organizational unit (OU) named Clients. A Group Policy object (GPO) named GPO1 is linked to the Clients OU. All of the client computers use a DNS server named Server1.

You configure a server named Server2 as an ISATAP router. You add a host (A) record for ISATAP to the contoso.com DNS zone.

You need to ensure that the client computers locate the ISATAP router.

What should you do?

Select one of the following:

Run the Set-DnsServerGlobalQueryBlockList cmdlet on Server1.
Configure the Network Options Group Policy preference of GPO1.
Run the Add-DnsServerResourceRecord cmdlet on Server1.
Configure the DNS Client Group Policy setting of GPO1.

Explanation

Question 40 of 47

Your network contains a production Active Directory forest named contoso.com and a test Active Directory forest named contoso.test. A trust relationship does not exist between the forests.

In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.

You transfer the backup of GPO1 to a domain controller in the contoso.com domain.

You need to create a GPO in contoso.com based on the settings of GPO1.You must achieve this goal by using the minimum amount of Administrative effort.

What should you do?

Select one of the following:

From Windows PowerShell, run the Get- GPO cmdlet and the Copy- GPO cmdlet.
From Windows PowerShell, run the New- GPO cmdlet and the Import- GPO cmdlet.
From Group Policy Management, create a new starter GPO. Right-click the new starter GPO, and then click Restore from Backup.
From Group Policy Management, right-click the Croup Policy Objects container, and then click Manage Backups.

Explanation

Question 41 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.

You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.

To which group should you add User1?

Select one of the following:

Hyper-V Administrators on Server1
Administrators on VM1
Server Operators on Server1
Power Users on VM1

Explanation

Question 42 of 47

You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.

You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Enterprise. You want to achieve this goal by using the minimum amount of administrative effort.

What should you perform?

Select one of the following:

a clean installation of Windows Server 2012
an offline servicing by using Dism
an online servicing by using Dism
an upgrade installation of Windows Server 2012

Explanation

Question 43 of 47

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.

You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.

The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a FQDN.

You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only.

You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.

What should you add?

Select one of the following:

The 015 DNS Domain Name option to Subnet1
The 015 DNS Domain Name option to Subnet2
The 006 DNS Servers option to Subnet2
The 006 DNS Servers option to Subnet1

Explanation

Question 44 of 47

You plan to deploy a file server to a temporary location.

The temporary location experiences intermittent power failures.

The file server will contain a dedicated volume for shared folders.

You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs.

Which file system should you use?

Select one of the following:

NFS
FAT32
ReFS
NTFS

Explanation

Question 45 of 47

Your network contains an Active Directory domain named contoso.com.

You log on to a domain controller by using an account named Admin1. Admin1 is a member of the Domain Admins group.

You view the properties of a group named Group1 as shown in the exhibit. (see picture)

Group1 is located in an organizational unit (OU) named OU1.

You need to ensure that you can modify the Security settings of Group1 by using Active Directory Users and Computers.

What should you do from Active Directory Users and Computers?

Select one of the following:

From the View menu, select Users, Contacts, Groups, and Computers as containers.
Right-click OU1 and select Delegate Control
From the View menu, select Advanced Features
Right-click contoso.com and select Delegate Control.

Explanation

Question 46 of 47

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.All client computers run Windows 8.

The domain contains a security group named Group1.

You have a Group Policy object (GPO) named GPO1.GPO1 is linked to the domain.

You need to ensure that only the members of Group1 can run the applications shown in the following table. (see picture1)

Which type of application control policy should you implement for each application?

To answer, select the appropriate rule types to the correct applications. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Select one or more of the following:

App1: Executable Rule
App1: Windows Install Rule
App1: Scrip Rule
App2: Packaged app Rule
App2: Windows Install Rule
App2: Scrip Rule
App3: Packaged app Rule
App3: Executable Rule
App3: Windows Install Rule

Explanation

Question 47 of 47

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts 50 virtual machines.

You need to create a script to list all of the virtual machines that have checkpoints and support Secure Boot.

What should you do? To answer, select the appropriate options in the answer area.

Select one or more of the following:

Box1: CheckPoint-Vm
Box1: Get-Vm
Box1: Get-VmSnapshot
Box2: CheckPoint-Vm
Box2: Get-Vm
Box2: Get-VmSnapshots
Box3: {$_.generation-eq 2}
Box3: {$_.NetworkAdapters-contains "secure
Box3: {$_.version-eq 3}

Explanation

Check answer

["https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596154/desktop_c9542422-78f9-4270-99f1-b276a172e066.gif","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596159/desktop_60849c5e-d416-41d5-89cc-bce92beb515a.gif","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596160/desktop_cfc90ce2-ea69-458f-b687-e29531c6ae15.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596166/desktop_5f83479e-59d6-4623-882e-bde3cd50543d.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596167/desktop_2e714a59-6558-465a-9694-3eb451af1871.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596173/desktop_7ac90785-4d9d-4b23-a659-05ab52f778df.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596178/desktop_1bff7367-00af-45c6-b9d8-4bc663f302f3.jpeg","https://cdn.goconqr.com/uploads/checkbox_question/image/2596181/desktop_c5bb6ca1-b9b7-4d58-968e-9f73231321f1.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596182/desktop_1ef5ebbf-bb65-49a4-87ec-5caf7a117477.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596183/desktop_f44a14b6-38d3-4ac8-9dd5-7b2a527b4910.jpeg","https://cdn.goconqr.com/uploads/checkbox_question/image/2596184/desktop_e62335b6-561d-4107-987d-83b52f50d2ca.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596188/desktop_86df641f-3ec8-4854-9bc0-42f0d742b587.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596192/desktop_30d01aa5-e33d-4e9d-a46f-c1e3084fbcf3.jpeg","https://cdn.goconqr.com/uploads/checkbox_question/image/2596199/desktop_b40b2e1a-41a4-4607-b535-525784c30a7b.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596204/desktop_e15e6e0b-173e-4104-b517-1f4b952deac2.jpeg","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2596210/desktop_35aa148f-0580-4542-8cf8-c8d80f5af823.jpeg","https://cdn.goconqr.com/uploads/checkbox_question/image/2596215/desktop_6a64310a-b063-41a3-ae12-cc49f1144728.png","https://cdn.goconqr.com/uploads/checkbox_question/image/2596218/desktop_fdda2e41-d221-4090-b167-d848f46327d2.png","https://cdn.goconqr.com/uploads/quiz_answer/image/6809019/desktop_b839ecff-ba4e-4b9e-a675-1cab7fced132.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809020/desktop_a1cf5334-a006-4bf0-a31e-915964d58c72.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809021/desktop_ced68a37-ea64-44fc-af19-48a37b1520d8.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809023/desktop_27798dc9-280f-428c-b78e-6c3bff3a6b97.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809029/desktop_015083e3-77da-4b7e-9721-38d46928cbca.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809030/desktop_e729b35a-8639-4878-8212-77c1bc41c402.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809035/desktop_b4a2d252-7c97-4e70-85fe-c95913e39426.jpeg","https://cdn.goconqr.com/uploads/quiz_answer/image/6809036/desktop_082471ca-f105-4df3-bb50-8300670be55d.jpeg"]

	Created by Alex Quito almost 9 years ago

	Copied by Alex Quito almost 9 years ago

Microsoft Exam 70-410: Installing and Configuring Windows Server 2012.

70-410 Microsoft Exam: Test 1 - Volume 2

Question 1 of 47

Select one of the following:

Explanation

Question 2 of 47

Select one of the following:

Explanation

Question 3 of 47

You have a server named Server1 that runs Windows Server 2012 R2. You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly. You need to ensure that the feature can be installed on Server1. What should you do?

Select one of the following:

Explanation

Question 4 of 47

You have a server named Server1 that runs Windows Server 2012 R2. You need to enable access-based enumeration for a file share on Server1. Which tool should you use?

Select one of the following:

Explanation

Question 5 of 47

Select one or more of the following:

Explanation

Question 6 of 47

Select one of the following:

Explanation

Question 7 of 47

Select one of the following:

Explanation

Question 8 of 47

Select one of the following:

Explanation

Question 9 of 47

Select one of the following:

Explanation

Question 10 of 47

Select one of the following:

Explanation

Question 11 of 47

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup. You need to configure a local Group Policy on Server1 that will apply only to non- administrators. Which tool should you use?

Select one of the following:

Explanation

Question 12 of 47

Select one of the following:

Explanation

Question 13 of 47

Select one of the following:

Explanation

Question 14 of 47

Select one of the following:

Explanation

Question 15 of 47

Select one of the following:

Explanation

Question 16 of 47

You have a server named Server1 that runs Windows Server 2012 R2. You add an additional disk to Server1 as shown in the exhibit. (Picture) You need to ensure that users can access the additional disk from drive C. What should you do?

Select one of the following:

Explanation

Question 17 of 47

You have a server that runs a Server Core installation of Windows Server 2012 R2. You need to change the DNS server used by IPv6. What should you do?

Select one of the following:

Explanation

Question 18 of 47

You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1. You need to add a graphical user interface (GUI) to Server1. Which tool should you use?

Select one of the following:

Explanation

Question 19 of 47

You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed. You open DNS Manager as shown in the exhibit. (Picture) You need to view the DNS server cache from DNS Manager. What should you do first?

Select one of the following:

Explanation

Question 20 of 47

Select one of the following:

Explanation

Question 21 of 47

Select one of the following:

Explanation

Question 22 of 47

Select one or more of the following:

Explanation

Question 23 of 47

Select one of the following:

Explanation

Question 24 of 47

You have a server that runs Windows Server 2012 R2. The disks on the server are configured as shown in the exhibit. (Picture) You need to create a storage pool that contains Disk 1 and Disk 2. What should you do first?

You have a server named Server1 that runs Windows Server 2012 R2.

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.

You need to ensure that the feature can be installed on Server1.

What should you do?

You have a server named Server1 that runs Windows Server 2012 R2.

You need to enable access-based enumeration for a file share on Server1.

Which tool should you use?

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.

You need to configure a local Group Policy on Server1 that will apply only to non- administrators.

Which tool should you use?

You have a server named Server1 that runs Windows Server 2012 R2.

You add an additional disk to Server1 as shown in the exhibit. (Picture)

You need to ensure that users can access the additional disk from drive C.

What should you do?

You have a server that runs a Server Core installation of Windows Server 2012 R2.

You need to change the DNS server used by IPv6.

What should you do?

You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.

You need to add a graphical user interface (GUI) to Server1.

Which tool should you use?

You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed.

You open DNS Manager as shown in the exhibit. (Picture)

You need to view the DNS server cache from DNS Manager.

What should you do first?

You have a server that runs Windows Server 2012 R2.

The disks on the server are configured as shown in the exhibit. (Picture)

You need to create a storage pool that contains Disk 1 and Disk 2.

What should you do first?

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.

Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.

VM1 has several snapshots.

You need to modify the snapshot file location of VM1.

What should you do?

You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.

You need to create an IPv6 reservation for Server2.

Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

You need to create a 3-TB virtual hard disk (VHD) on Server1.

Which tool should you use?

Your network contains an Active Directory domain named contoso.com.

You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.

You need to ensure that you can view processor usage and memory usage information in Server Manager.

What should you do?