CCNA PreTest

Question 1 of 23

1

Which three statements are true about the operation of a full-duplex Ethernet network?

Select one of the following:

There are no collisions in full-duplex mode.
A dedicated switch port is required for each full-duplex node.
The host network card and the switch port must be capable of operating in full-duplex mode.
All of the above.

Explanation

Question 2 of 23

1

Which OSI layer header contains the address of a destination host that is on another network?

Select one or more of the following:

application
session
transport
network
data link
physical

Explanation

Question 3 of 23

1

Which layer of the TCP/IP stack combines the OSI model physical and data link layers?

Select one or more of the following:

Internet layer
transport layer
application layer
network access layer

Explanation

Question 4 of 23

1

Which protocol uses a connection-oriented service to deliver files between end systems?

Select one or more of the following:

TFTP
DNS
FTP
SNMP
RIP

Explanation

Question 5 of 23

1

If the hubs in the graphic were replaced by switches, what would be virtually eliminated?

Select one or more of the following:

broadcast domains
repeater domains
Ethernet collisions
signal amplification
Ethernet broadcasts

Explanation

Question 6 of 23

1

If host A sends an IP packet to host B, what will the source physical address be in the frame when
it reaches host B?

Select one or more of the following:

10.168.10.99
10.168.11.88
A1:A1:A1:A1:A1:A1
B2:B2:B2:B2:B2:B2
C3:C3:C3:C3:C3:C3
D4:D4:D4:D4:D4:D4

Explanation

Question 7 of 23

1

HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the
Toronto router. What will the Layer 2 destination address be at this point?

Select one or more of the following:

abcd.1123.0045
192.168.7.17
aabb.5555.2222
192.168.1.1
abcd.2246.0035

Explanation

Question 8 of 23

1

Which network device functions only at Layer 1 of the OSI model?

Select one or more of the following:

Bridge
HUB
NIC
Router
Switch

Explanation

Question 9 of 23

1

The host in Kiev sends a request for an HTML document to the server in Minsk. What will be the
source IP address of the packet as it leaves the Kiev router?

Select one of the following:

10.1.0.1
10.1.0.5
10.1.0.6
10.1.0.14
10.1.1.16
10.1.2.8

Explanation

Question 10 of 23

1

As packets travel from Mary to Robert, which three devices will use the destination MAC address
of the packet to determine a forwarding path? (Choose three.)

Select one or more of the following:

Hub1
Switch1
Router1
Switch2
Router2
Switch3

Explanation

Question 11 of 23

1

Mary is sending an instant message to Robert. The message will be broken into a series of
packets that will traverse all network devices. What addresses will populate these packets as they
are forwarded from Router1 to Router2?

Select one of the following:

Explanation

Question 12 of 23

1

A network device needs to be installed in the place of the icon labeled Network Device to
accommodate a leased line attachment to the Internet. Which network device and interface
configuration meets the minimum requirements for this installation?

Select one of the following:

a router with two Ethernet interfaces
a switch with two Ethernet interfaces
a router with one Ethernet and one serial interface
a switch with one Ethernet and one serial interface
a router with one Ethernet and one modem interface

Explanation

Question 13 of 23

1

Which transport layer protocol provides best-effort delivery service with no acknowledgment
receipt required?

Select one of the following:

HTTP
IP
TCP
Telnet
UDP

Explanation

Question 14 of 23

1

Which layer of the OSI model controls the reliability of communications between network devices
using flow control, sequencing and acknowledgments?

Select one of the following:

Physical
Data-link
Transport
Network

Explanation

Question 15 of 23

1

Which statements are true regarding ICMP packets? (Choose two.)

Select one or more of the following:

They acknowledge receipt of TCP segments.
They guarantee datagram delivery.
TRACERT uses ICMP packets.
They are encapsulated within IP datagrams.
They are encapsulated within UDP datagrams.

Explanation

Question 16 of 23

1

Which statements accurately describe CDP? (Choose three.)

Select one or more of the following:

CDP is an IEEE standard protocol.
CDP is a Cisco proprietary protocol.
CDP is a datalink layer protocol.
CDP is a network layer protocol.
CDP can discover directly connected neighboring Cisco devices.
CDP can discover Cisco devices that are not directly connected.

Explanation

Question 17 of 23

1

How does a switch differ from a hub?

Select one of the following:

A switch does not induce any latency into the frame transfer time.
A switch tracks MAC addresses of directly-connected devices.
A switch operates at a lower, more efficient layer of the OSI model.
A switch decreases the number of broadcast domains.
A switch decreases the number of collision domains.

Explanation

Question 18 of 23

1

What must occur before a workstation can exchange HTTP packets with a web server?

Select one of the following:

A UDP connection must be established between the workstation and its default gateway.
A UDP connection must be established between the workstation and the web server.
A TCP connection must be established between the workstation and its default gateway.
A TCP connection must be established between the workstation and the web server.
An ICMP connection must be established between the workstation and its default gateway.
An ICMP connection must be established between the workstation and the web server.

Explanation

Question 19 of 23

1

How does TCP differ from UDP? (Choose two.)

Select one or more of the following:

TCP provides best effort delivery.
TCP provides synchronized communication.
TCP segments are essentially datagrams.
TCP provides sequence numbering of packets.
TCP uses broadcast delivery.

Explanation

Question 20 of 23

1

A workstation has just resolved a browser URL to the IP address of a server. What protocol will
the workstation now use to determine the destination MAC address to be placed into frames
directed toward the server?

Select one of the following:

HTTP
DNS
DHCP
RARP
ARP

Explanation

Question 21 of 23

1

Host A is sending a packet to Host B for the first time. What destination MAC address will Host A
use in the ARP request?

Select one of the following:

192.168.0.1
172.16.0.50
00-17-94-61-18-b0
00-19-d3-2d-c3-b2
ff-ff-ff-ff-ff-ff

Explanation

Question 22 of 23

1

What are two common TCP applications? (Choose two.)

Select one of the following:

TFTP
SMTP
SNMP
FTP
DNS

Explanation

Question 23 of 23

1

SwitchA receives the frame with the addressing shown. According to the command output also
shown in the exhibit, how will SwitchA handle this

Select one of the following:

It will drop the frame.
It will forward the frame out port Fa0/6 only.
It will flood the frame out all ports.
It will flood the frame out all ports except Fa0/3.

	Created by michael smith0754 over 8 years ago

Pretest for CCNA

CCNA PreTest

Question 1 of 23

Which three statements are true about the operation of a full-duplex Ethernet network?

Select one of the following:

Explanation

Question 2 of 23

Which OSI layer header contains the address of a destination host that is on another network?

Select one or more of the following:

Explanation

Question 3 of 23

Which layer of the TCP/IP stack combines the OSI model physical and data link layers?

Select one or more of the following:

Explanation

Question 4 of 23

Which protocol uses a connection-oriented service to deliver files between end systems?

Select one or more of the following:

Explanation

Question 5 of 23

If the hubs in the graphic were replaced by switches, what would be virtually eliminated?

Select one or more of the following:

Explanation

Question 6 of 23

If host A sends an IP packet to host B, what will the source physical address be in the frame when it reaches host B?

Select one or more of the following:

Explanation

Question 7 of 23

HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the Toronto router. What will the Layer 2 destination address be at this point?

Select one or more of the following:

Explanation

Question 8 of 23

Which network device functions only at Layer 1 of the OSI model?

Select one or more of the following:

Explanation

Question 9 of 23

The host in Kiev sends a request for an HTML document to the server in Minsk. What will be the source IP address of the packet as it leaves the Kiev router?

Select one of the following:

Explanation

Question 10 of 23

As packets travel from Mary to Robert, which three devices will use the destination MAC address of the packet to determine a forwarding path? (Choose three.)

Select one or more of the following:

Explanation

Question 11 of 23

Mary is sending an instant message to Robert. The message will be broken into a series of packets that will traverse all network devices. What addresses will populate these packets as they are forwarded from Router1 to Router2?

Select one of the following:

Explanation

Question 12 of 23

A network device needs to be installed in the place of the icon labeled Network Device to accommodate a leased line attachment to the Internet. Which network device and interface configuration meets the minimum requirements for this installation?

Select one of the following:

Explanation

Question 13 of 23

Which transport layer protocol provides best-effort delivery service with no acknowledgment receipt required?

Select one of the following:

Explanation

Question 14 of 23

Which layer of the OSI model controls the reliability of communications between network devices using flow control, sequencing and acknowledgments?

Select one of the following:

Explanation

Question 15 of 23

Which statements are true regarding ICMP packets? (Choose two.)

Select one or more of the following:

Explanation

Question 16 of 23

Which statements accurately describe CDP? (Choose three.)

Select one or more of the following:

Explanation

Question 17 of 23

How does a switch differ from a hub?

Select one of the following:

Explanation

Question 18 of 23

What must occur before a workstation can exchange HTTP packets with a web server?

Select one of the following:

Explanation

Question 19 of 23

How does TCP differ from UDP? (Choose two.)

Select one or more of the following:

Explanation

Question 20 of 23

A workstation has just resolved a browser URL to the IP address of a server. What protocol will the workstation now use to determine the destination MAC address to be placed into frames directed toward the server?

If host A sends an IP packet to host B, what will the source physical address be in the frame when
it reaches host B?

HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the
Toronto router. What will the Layer 2 destination address be at this point?

The host in Kiev sends a request for an HTML document to the server in Minsk. What will be the
source IP address of the packet as it leaves the Kiev router?

As packets travel from Mary to Robert, which three devices will use the destination MAC address
of the packet to determine a forwarding path? (Choose three.)

Mary is sending an instant message to Robert. The message will be broken into a series of
packets that will traverse all network devices. What addresses will populate these packets as they
are forwarded from Router1 to Router2?

A network device needs to be installed in the place of the icon labeled Network Device to
accommodate a leased line attachment to the Internet. Which network device and interface
configuration meets the minimum requirements for this installation?

Which transport layer protocol provides best-effort delivery service with no acknowledgment
receipt required?

Which layer of the OSI model controls the reliability of communications between network devices
using flow control, sequencing and acknowledgments?

A workstation has just resolved a browser URL to the IP address of a server. What protocol will
the workstation now use to determine the destination MAC address to be placed into frames
directed toward the server?

Host A is sending a packet to Host B for the first time. What destination MAC address will Host A
use in the ARP request?

SwitchA receives the frame with the addressing shown. According to the command output also
shown in the exhibit, how will SwitchA handle this