Joseph Whilden J
Quiz by , created more than 1 year ago

Quiz 2

21
1
0
Joseph Whilden J
Created by Joseph Whilden J over 8 years ago
Close

Munition Handling and Loading Equipment: Quiz 2

Question 1 of 47

1

How many different outputs can an A/M 32A-60 provide?

Select one of the following:

  • 2

  • 3

  • 4

  • 5

Explanation

Question 2 of 47

1

Which item is the only auxiliary power unit (APU) to provide both electrical and pneumatic power?

Select one of the following:

  • A/M 32A-60

  • A/M 32A-86

  • A/M 32A-95

  • MC-2A

Explanation

Question 3 of 47

1

Where is the A/M 32A-60 pneumatic duct hose stored?

Select one of the following:

  • On the unit's roof housing

  • In the rear storage compartment

  • In the front storage compartment

  • In the chassis storage compartment

Explanation

Question 4 of 47

1

Identify the output of the A/M 32A-95

Select one of the following:

  • 28 VDC

  • Bleed air

  • 120 VAC, single-phase, 400 Hz

  • 120/208 VAC, three-phase, 400 hz

Explanation

Question 5 of 47

1

Due to the expansion properties of fuel, an unmodified A/M 32A-95 fuel tank should not be filled more than approximately how full?

Select one of the following:

  • 1/3

  • 1/2

  • 5/8

  • 3/4

Explanation

Question 6 of 47

1

Which electrical output is supplied by the A/M 32A-86 generator set?

Select one of the following:

  • 110/120 VAC or 208/230 VAC

  • 115/200 VAC or 230/400 VAC

  • 120/208 VAC

  • 28 VDC

Explanation

Question 7 of 47

1

How many instruments/control panels must the operator make use of during operation of the A/M 32A-86 generator set?

Select one of the following:

  • 1

  • 2

  • 3

  • 4

Explanation

Question 8 of 47

1

Which panel of the A/M 32A-86 generator set has the circuit breaker to shut off current flow in case of an overload?

Select one of the following:

  • Generator control

  • Engine control

  • External AC

  • External DC

Explanation

Question 9 of 47

1

Which auxiliary power unit serves as an external power source for the MQ-1 and MQ-9 aircraft?

Select one of the following:

  • A/M 32A-60

  • A/M 32A-86

  • A/M 32A-95

  • Starter cart assembly (SCA)

Explanation

Question 10 of 47

1

Where is the control panel of the starter cart assembly (SCA) located?

Select one of the following:

  • Underneath a cover located at the top of the unit

  • On the engine monitoring panel

  • On the power outlet located on the right side of the generator set

  • On the starter cart assembly electronics tray

Explanation

Question 11 of 47

1

An operator is not required at or in the immediate vicinity of an in-use auxiliary power unit (APU) when they are practicing loading

Select one of the following:

  • High explosive munitions

  • Live nuclear weapons

  • Live chemical weapons

  • Inert training munitions

Explanation

Question 12 of 47

1

Fighter aircraft may be exempted from the 50 foot distance placement requirements of an auxiliary power unit (APU) during

Select one of the following:

  • Combat operations only

  • Simulated combat operations only

  • Combat or simulated combat operations

  • Combat, simulated combat, or adverse weather conditions

Explanation

Question 13 of 47

1

Which area must you void when operating units powered by turbine engines?

Select one of the following:

  • Engine air intake

  • Engine air exhaust

  • Engine plane of rotation

  • Power unit bleed air service hose

Explanation

Question 14 of 47

1

Which air compressor may be used to per ate small pneumatic tools?

Select one of the following:

  • MC-1A

  • MC-2A

  • MD-3

  • A/M 32A-60

Explanation

Question 15 of 47

1

How much air pressure is produced by the MC-2A air compressor?

Select one of the following:

  • 5 cfm at 200 psi

  • 15 cfm at 200 psi

  • 5 cfm at 3200 psi

  • 15 cfm at 3200 psi

Explanation

Question 16 of 47

1

Before you connect or disconnect a high-pressure service hose, you must make sure the system is not

Select one of the following:

  • Pressurized with more than 100 psi

  • Pressurized with more than 15 psi

  • Pressurized fully

  • Pressurized

Explanation

Question 17 of 47

1

Which power output of a portable floodlight set is used for powering common electrically powered hand tools?

Select one of the following:

  • 28 VDC

  • 115-120 VAC

  • 220-240 VAC

  • 225-300 VAC

Explanation

Question 18 of 47

1

The FL-1D can serve as a ground power source for MQ-1 and MQ-9 aircraft when used in conjunction with a/an

Select one of the following:

  • MC-2A air compressor

  • A/M 32A-60 generator set

  • A/M 32C-10A air conditioner

  • DCs40-75 "Sorensen" power supply unit

Explanation

Question 19 of 47

1

When can you use the floodlight receptacles for external power to operate accessories

Select one of the following:

  • When 115-120 VAC is required

  • When 110-115 VAC is required

  • When 235-300 VAC is required

  • Never, these receptacles cannot be used to operate accessories

Explanation

Question 20 of 47

1

How are flood lights positioned when working around aircraft?

Select one of the following:

  • Downwind from the A/C

  • At the end of their power cord

  • 50 feet away from the A/C nearest point

  • As far away as possible from the A/C, while still providing adequate lighting

Explanation

Question 21 of 47

1

In which position must the FL-1D's floodlight platform be placed during towing?

Select one of the following:

  • Any position

  • Lowered halfway

  • Lowered completely

  • Lowered just enough to clear overhead obstacles

Explanation

Question 22 of 47

1

Which storage compartment is the A/M 32C-10 duct hoses stored?

Select one of the following:

  • Unit's roof housing

  • Rear

  • Front

  • Chassis

Explanation

Question 23 of 47

1

Which A/M 32C-10 control panel will you use when operating the system?

Select one of the following:

  • High pressure air controls

  • Conditioned air controls

  • Generator control panel

  • Direct current (DC) power panel

Explanation

Question 24 of 47

1

How far from the supported aircraft should the A/M 32C-10 air conditioner be positioned for optimum unit operating efficiency and safety?

Select one of the following:

  • 8 to 10 feet

  • 10 to 12 feet

  • 15 to 30 feet

  • 50 feet minimum

Explanation

Question 25 of 47

1

Which per pound per square inch (psi) is the maximum amount of bleed-air pressure that may be applied to the -10 air conditioner?

Select one of the following:

  • 15 psi

  • 25 psi

  • 35 psi

  • 45 psi

Explanation

Question 26 of 47

1

How many operators are required to be present during the operation of the -10 air conditioner?

Select one of the following:

  • 1

  • 2

  • 3

  • 4

Explanation

Question 27 of 47

1

Which additional piece of aerospace ground equipment (AGE) is required during the operation of the polyalphaolefin (PAO)/air cooling cart?

Select one of the following:

  • A/M 32A-60 generator set

  • A/M 32A-86 generator set

  • A/M 32A-95 generator set

  • None, it is a self-contained system

Explanation

Question 28 of 47

1

How many fluid temperature modes are available on the polyalphaolefin (PAO)/air cooling cart?

Select one of the following:

  • 1

  • 2

  • 3

  • 4

Explanation

Question 29 of 47

1

How does the operator initiate the delivery of polyalphaolefin fluid once it has reached proper operating temperature?

Select one of the following:

  • By closing the aft restrictor valve

  • By opening the aft restrictor valve

  • By opening the aft restrictor manifold

  • The operator takes no action, the polyalphaolefin (PAO)/air cooling cart begins fluid delivery automatically

Explanation

Question 30 of 47

1

Which action must be ensured before making or breaking a connection between the polyalphaolefin (PAO)/air cooling cart and the aircraft?

Select one of the following:

  • Cart power is off

  • System is depressurized

  • Servicing lines are bled

  • Servicing lines are free of kinks

Explanation

Question 31 of 47

1

The cool-air hatch on the MJ-2A hydraulic test stand is located on the unit, by which location on the unit?

Select one of the following:

  • Rear

  • Front

  • Side

  • Top

Explanation

Question 32 of 47

1

Which personnel protective equipment (PPE) must be worn when you operate the MJ-2A?

Select one of the following:

  • Goggles

  • Ear protectors

  • Gloves

  • Coveralls

Explanation

Question 33 of 47

1

Identify the primary reason for making sure aircraft fittings are clean before attaching hydraulic servicing hoses?

Select one of the following:

  • Dirty fittings will cause damage to the threads of the connectors on the test stand

  • Dirty fittings can cause an incomplete seal with the hoses resulting in leaks at the attach points

  • Dirty fittings can introduce contaminants to the hydraulic system causing damage to valves and lines

  • Dirt can scour protective coatings off of the fittings that will allow then to corrode when bare metal is subjected to the environment

Explanation

Question 34 of 47

1

Which aircraft(s) require aircraft armament system personnel to use the self-generating nitrogen servicing cart (SGNSC)?

Select one of the following:

  • F-15, F-16, and F-22

  • B-1, B-2, and B-52

  • F-15 and F-15E

  • F-22 only

Explanation

Question 35 of 47

1

When using the self-generating nitrogen servicing cart (SGNSC) why is it important that waste gasses are not allowed to accumulate in an enclosed space?

Select one of the following:

  • Dangerous levels of carbon monoxide can build up displacing space

  • Dangerous levels of carbon dioxide can build up displacing oxygen

  • Excess nitrogen can pose a fire or explosion hazard

  • Excess oxygen can pose a fire or explosion hazard

Explanation

Question 36 of 47

1

Why is it important to prevent venting the self-generating nitrogen servicing cart (SGNSC) storage tanks in an enclosed space without sufficient ventilation?

Select one of the following:

  • Excess nitrogen can pose a fire/explosion hazard

  • Venting of high pressure gas is extremely loud and could damage hearing

  • A dangerous overpressure situation could occur causing harm to personnel and damage to structures

  • Large volumes of nitrogen can displace the oxygen in the air, making it possible for a person to suffocate without warning

Explanation

Question 37 of 47

1

Which precaution must be taken prior to attempting to loosen fittings, or removing tubes or hoses when using the self-generating nitrogen servicing cart (SGNSC)?

Select one of the following:

  • Ensure cart power is off

  • Ensure the entire system is depressurized

  • You must vent the pressure from that part of the system through the appropriate valve

  • Ensure the carts high pressure storage tanks main shutoff valves are in the "NO-FLOW" position

Explanation

Question 38 of 47

1

the maximum static load the B-1maintenance stand can sustain is

Select one of the following:

  • 300 pounds

  • 400 pounds

  • 500 pounds

  • 600 pounds

Explanation

Question 39 of 47

1

Identify the platform height range of the B-4 maintenance stand?

Select one of the following:

  • 3 to 7 feet

  • 4 to 8 feet

  • 3 to 10 feet

  • 4 to 12 feet

Explanation

Question 40 of 47

1

The hand pump for raising the B-4 maintenance stand is located on the

Select one of the following:

  • Platform near the ladder

  • Remote control unit (RCU)

  • Base of the stand near the aft castors

  • Base of the stand near the forward castors

Explanation

Question 41 of 47

1

Which maintenance stand is described as a scissors-type, with a variable height platform, and mounted on a long-legged caster-equipment base?

Select one of the following:

  • B-1

  • B-4

  • B-5

  • C-1

Explanation

Question 42 of 47

1

Identify the platform height range of the B-5 maintenance stand

Select one of the following:

  • 1 to 7 feet

  • 1 to 10 feet

  • 7 to 12 feet

  • 7 to 15 feet

Explanation

Question 43 of 47

1

Which stand can be used independently, or can be installed as an extension on the B-1maintenance stand?

Select one of the following:

  • B-2

  • B-4

  • B-5

  • C-1

Explanation

Question 44 of 47

1

The lifting capacity of the davit on the split deck is

Select one of the following:

  • 200 - 500 pounds

  • 250 - 500 pounds

  • 300 - 500 pounds

  • 350 - 500 pounds

Explanation

Question 45 of 47

1

If the split-deck maintenance platform's tape switches detect an obstruction during an operation, what will the switches stop on the unit?

Select one of the following:

  • Forward drive capacity only

  • Platform extension capability

  • Platform extension and lowering capabilities only

  • Forward drive, platform extension and lowering capabilities

Explanation

Question 46 of 47

1

During an operator's pre-use inspection of aerospace ground equipment (AGE), what is required by the operator to ensure proper unit operation?

Select one of the following:

  • Check the AFTO 781K

  • Check the AGE personnel as the status of the unit

  • Cycle the unit through the capabilities that you will use

  • Cycle the unit completely through its range of capabilities

Explanation

Question 47 of 47

1

Which AFTO form is used to annotate any defects you may find on your aerospace ground equipment (AGE)?

Select one of the following:

  • AFTO Forms 244 and 245

  • AFTO Form 349

  • AFTO Form 350

  • AFTO Form 781A

Explanation

Previous
Next