Btec engineering level 1

Question 1 of 19

1

What are the three types of forging ?

Select one of the following:

Drop, press, sand
Sand, press, upset
Upset,drop, investment
Drop, upset, press

Explanation

Question 2 of 19

1

Select from the dropdown lists to complete the text.

Casting is ( pouring, cooking, feeding, adding ) molten ( metal, plastic, materials, iron/steel/aluminium ) into a die, where it then hardens. Sometimes it may need ( secondary machining, extra equipment, additional machines, visual tools, machining, bits broken off ) to achieve the correct look/finish.

Explanation

Question 3 of 19

7

Click on each orange point and write the correct answer.

Label the lathe.

Explanation

Question 4 of 19

1

Are there 6 stages in LCA

Select one of the following:

True
False

Explanation

Question 5 of 19

1

❌ manufacturing is a way of reducing ❌/waste produced/time. Just in time(JIT) reduces waste as parts/components are delivered just before they are needed, therfore reducing un-used parts and saving the company money. ❌ is where floor workers suggest ways to improve efficency and can add ideas of how to keep them happy/motivated so they are working as best as possible. Poke-a-yoke is using machines to reduce time/money/waste, Robots/machines do the job quicker and more efficiently but ❌ need humans to finsih the product; high start up ❌ are a downside and having someone to maintain/fix them.

Drag and drop to complete the text.

Lean

Quick

Efficient

Lenao

costs

Workers needed

Equipment

Responsibility

Kaizen

Poke-a-yoke

Staff managment

can sometimes

Always

Never

costs/investments

time

research

Explanation

Question 6 of 19

1

What safety equipment is needed when welding?

Select one or more of the following:

Heat proof gloves
Welding mask
Protective screen
Welding jacket

Explanation

Question 7 of 19

1

When welding aim for a straight bead

Select one of the following:

True
False

Explanation

Question 8 of 19

1

What are the four Rs ?

Select one of the following:

Reduce, reuse, recover, recycle
Reduce, reuse, recover, repair
Re-waste, repair, recover, recycle

Explanation

Question 9 of 19

1

Types of production !!!!

Select one or more of the following:

Batch
Mass
Bulk
Special
Limited edition/ Special edition
Continous
One off

Explanation

Question 10 of 19

1

Robots are used ONLY for Exploration, packing and dispatching and Assembly

Select one of the following:

True
False

Explanation

Question 11 of 19

1

Fill the blank spaces to complete the text.

Powder metalurgy is in a until sintered. Sintering joins the together by melting them so more of each bond is touching. Without sintering the metal is and cannot be used.

Explanation

Question 12 of 19

1

Metal foams cannot be used after one load of impact/collision

Select one of the following:

True
False

Explanation

Question 13 of 19

1

Metal foams are used in Car doors to protect passangers and reduce impact force, and also are Only used in aeroplanes because they are not flammable(resulting in no fire in a crash)

Select one of the following:

True
False

Explanation

Question 14 of 19

1

Optical fibres have 3 layers of outer coating/insulation so that no info/data is lost

Select one of the following:

True
False

Explanation

Question 15 of 19

1

Fill the blank spaces to complete the text.

Hydrogen fuel cells are a alternative to petrol, they only produce electricity and vapour, also they are not running out and are cheap to run. However Hydrogen is very however so that is a reason use them.

Explanation

Question 16 of 19

1

Nanotechnology can be used in many different industrys. Nanoparticles are measured in ❌ (nm), a nanometre is a ❌ of a normal metre. Nanoparticles can be found ❌ but can also be made, or even created by accident in combustion.Nanoparticles have different particles on a nanoscale compared to a normal scale, this makes it easier to change the ❌ of the material.

Drag and drop to complete the text.

Nanometres

Neutonmetres

Neutral miles

billionth

Millionth

Trillionth

naturally

Abroad

In the sea

In rocks

properties

shape

colour

design

Explanation

Question 17 of 19

1

Fill the blank spaces to complete the text.

is the science of appplying electronic principles to solve medical problems, which are normally linked to nerves, allowing for much more movement. The biggest advantage of bionics is being able to what has been lost(even if its sight, movement, e.t.c)

Explanation

Question 18 of 19

1

Select from the dropdown lists to complete the text.

( Blended, Merged, Attached ) wingbodies- Is where the wings are fabricated into the design of the plane meaning wings do not need to be made separately and then transported and then attached. They are used to reduce ( drag, air resistance, pollution, fuel ) therefore reducing fuel used making it more fuel ( efficient, responsible, sustainable ). Also not having to attach the wings separately means the plane ( weighs, moves, smells ) less also making it more fuel efficient.

Explanation

Question 19 of 19

1

5 stages in pcb manufacturing,
1-design layout,
2-producing the artwork,
3-etching
4-drilling the board
5-❌

Drag and drop to complete the text.

populating the board with soldering

applying copper paste

wiping the board clean

	Created by izaakheath08016183 over 8 years ago

General questions on topics covered in unit 1

Btec engineering level 1

Question 1 of 19

What are the three types of forging ?

Select one of the following:

Explanation

Question 2 of 19

Select from the dropdown lists to complete the text.

Explanation

Question 3 of 19

Click on each orange point and write the correct answer.

Label the lathe.

Explanation

Question 4 of 19

Are there 6 stages in LCA

Select one of the following:

Explanation

Question 5 of 19

Drag and drop to complete the text.

Explanation

Question 6 of 19

What safety equipment is needed when welding?

Select one or more of the following:

Explanation

Question 7 of 19

When welding aim for a straight bead

Select one of the following:

Explanation

Question 8 of 19

What are the four Rs ?

Select one of the following:

Explanation

Question 9 of 19

Types of production !!!!

Select one or more of the following:

Explanation

Question 10 of 19

Robots are used ONLY for Exploration, packing and dispatching and Assembly

Select one of the following:

Explanation

Question 11 of 19

Fill the blank spaces to complete the text.

Powder metalurgy is in a until sintered. Sintering joins the together by melting them so more of each bond is touching. Without sintering the metal is and cannot be used.

Explanation

Question 12 of 19

Metal foams cannot be used after one load of impact/collision

Select one of the following:

Explanation

Question 13 of 19

Metal foams are used in Car doors to protect passangers and reduce impact force, and also are Only used in aeroplanes because they are not flammable(resulting in no fire in a crash)

Select one of the following:

Explanation

Question 14 of 19

Optical fibres have 3 layers of outer coating/insulation so that no info/data is lost

Select one of the following:

Explanation

Question 15 of 19

Fill the blank spaces to complete the text.

Hydrogen fuel cells are a alternative to petrol, they only produce electricity and vapour, also they are not running out and are cheap to run. However Hydrogen is very however so that is a reason use them.

Explanation

Question 16 of 19

Drag and drop to complete the text.

Explanation

Question 17 of 19

Fill the blank spaces to complete the text.

is the science of appplying electronic principles to solve medical problems, which are normally linked to nerves, allowing for much more movement. The biggest advantage of bionics is being able to what has been lost(even if its sight, movement, e.t.c)

Explanation

Question 18 of 19

Select from the dropdown lists to complete the text.

Explanation

Question 19 of 19

5 stages in pcb manufacturing, 1-design layout, 2-producing the artwork, 3-etching 4-drilling the board 5-❌

Drag and drop to complete the text.

Explanation

5 stages in pcb manufacturing,
1-design layout,
2-producing the artwork,
3-etching
4-drilling the board
5-❌