Identity Manager Administrator

Question 1 of 117

1

When data changes in the Identity Vault or a connected application, which processes the
changes?

Select one of the following:

Drivers
Remote Loader
Identity Vault
Metadirectory Engine
Connected application

Explanation

Question 2 of 117

1

Which statement is true?

Select one of the following:

When an event occurs in the Identity Vault, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Publisher channel to a driver shim.
When an event occurs in the Identity Vault, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to a driver shim.
When an event occurs in a connected system, Identity Manager creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to a driver shim.
When an event occurs in the Identity Vault, a driver shim creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to Identity
Manager.
When an event occurs in a connected system, a Driver Shim creates an XML document that
describes the Identity Vault event and submits it through the Subscriber channel to Identity
Manager.

Explanation

Question 3 of 117

1

Which statements are true? (Choose 2.)

Select one or more of the following:

When an event is being sent to a driver, it is a notification.
When an event is being sent to a driver, it is a command.
When an event is being sent to Identity Manager, it is a command.
When an event is being sent to Identity Manager, it is a notification.
Events and commands are handled the same way within an IDM 4 environment.

Explanation

Question 4 of 117

1

What does a Driver object contain? (Choose 2.)

Select one or more of the following:

Packages
Driver Set
Policy Objects
Application driver shim
Subscriber and Publisher objects

Explanation

Question 5 of 117

1

Identity Manager uses a MetaDirectory Engine to process Identity Vault data and events. What
component assures changes in the Identity Vault are not lost if a connected system goes offline?

Select one of the following:

Partition
Obit flag
Change Log
Event Cache

Explanation

Question 6 of 117

1

An Identity Manager Job can only interact with which driver channel?

Select one of the following:

Input
Sender
Output
Receiver
Publisher
Placement
Subscriber

Explanation

Question 7 of 117

1

Which installation mode is supported by the integrated installer?

Select one of the following:

Silent mode
Non-root mode
Console mode
AutoYaST mode
Standalone mode

Explanation

Question 8 of 117

1

Which statements about the Integrated Installer are true? (Choose 2.)

Select one or more of the following:

It automatically handles dependencies
It automatically installs all of the drivers
The iManager plug-in needs to be manually installed
It exists only for the Windows operating system family

Explanation

Question 9 of 117

1

Which task within Novell iManager allows administrators to view all objects that are associated
with a particular Novell IDM driver?

Select one of the following:

Object Inspector
Driver Inspector
DriverSet Inspector
Driver Cache Inspector

Explanation

Question 10 of 117

1

What is the minimum RAM system requirement for Designer?

Select one of the following:

128 MB
256 MB
512 MB
1024 MB
2048 MB

Explanation

Question 11 of 117

1

When using Designer, which modeling mode is used to do all low-level operations with driver sets,
drivers, policies and applications?

Select one of the following:

Table Mode
System Mode
DataFlow Mode
Architect Mode
Developer Mode

Explanation

Question 12 of 117

1

Which view enables you to view the filters that allow the data to flow between all of the systems
and the Identity Vaults as well as view how passwords flow through the different systems?

Select one of the following:

Project view
Outline view
Dataflow view
Navigator view
Policy Set view

Explanation

Question 13 of 117

1

When using Designer, a perspective is a collection of related views and editors. Which perspective
should be open the first time you run the application?

Select one of the following:

Debug perspective
Designer perspective
Java/Java Browsing perspective
Java Type Hierarchy perspective
Plug-in Development perspective

Explanation

Question 14 of 117

1

Which view do you use to access Policy Simulator? (Choose 2.)

Select one or more of the following:

The Tasks view
The Outline view
The Project view
The Navigator view
The Policy Flow view

Explanation

Question 15 of 117

1

When you start Designer for the first time or start Designer without a project listed, which should you first do?

Select one of the following:

Make sure that the Debug perspective is selected.
Make sure that the Plug-in perspective is selected.
Make sure that the Designer perspective is selected.
Make sure that the Java/Java Browsing perspective is selected.
Make sure that the Java Type Hierarchy perspective is selected.

Explanation

Question 16 of 117

1

When using Designer, which view do you use to import driver sets, drivers, and channels from the
file system?

Select one of the following:

The Tasks view
The Project view
The Outline view
The Navigator view
The Policy Flow view

Explanation

Question 17 of 117

1

When checking in a project to a Version Control Server, you will need to specify a file path to your
Subversion server or a URL to the Subversion server. If you specify a URL, which protocols are
supported? (Choose 4.)

Select one or more of the following:

FTP
NFS
SVN
HTTP
SFTP
HTTPS
SVN + SSH

Explanation

Question 18 of 117

1

When is the package catalog created?

Select one of the following:

When a package is installed
When a driver object is created
When a Driver Set object is created
When a project is created or imported

Explanation

Question 19 of 117

1

Which statement is true regarding packages?

Select one of the following:

You can downgrade any package that has been upgraded.
You can delete packages from the package catalog at anytime.
You can only upgrade packages that have been added to drivers.
Before you can import packages into the package catalog, you must install them.

Explanation

Question 20 of 117

1

When you install Active Directory drivers, you must choose an authentication method.
Authentication identifies the driver shim to Active Directory and, potentially, to the local machine.
Which statements are true regarding the Negotiate authentication method? (Choose 2.)

Select one or more of the following:

This is the preferred authentication method.
This can be installed on a server that is not a member of the domain.
This uses Kerberos, NTLM, or a pluggable authentication scheme if one is installed.
This is used when the server hosting the driver shim is not a member of the domain.
When using this, some provisioning services, such as Exchange mailbox provisioning and
password synchronization, are unavailable

Explanation

Question 21 of 117

1

If you map the eDirectory attribute of Login Expiration Time to the Active Directory attribute of
accountExpires, when does the account in Active Directory expire?

Select one of the following:

A day later than the time set in eDirectory
A day earlier than the time set in eDirectory
An hour later than the time set in eDirectory
At the same time as the time set in eDirectory
An hour earlier than the time set in eDirectory

Explanation

Question 22 of 117

1

Which method can be used to start the process of installing Active Directory driver packages?

Select one of the following:

In the Modeler, right-click the driver set where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.
In the Modeler, right-click the Identity Vault where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.
In the Modeler, right-click the server where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.
In the Modeler, right-click the application where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.
In the Modeler, right-click the package catalog where you want to create the driver; then
select New > Driver to display the Driver Configuration Wizard.

Explanation

Question 23 of 117

1

When installing Active Directory driver packages, you can also install optional features for the Active Directory driver. Which feature should you select if you are using the Identity Reporting Module?

Select one of the following:

Data Collection
Account Tracking
Default Configuration
Password Synchronization
Entitlements and Exchange Mailbox Support

Explanation

Question 24 of 117

1

In which order should you create and start an Active Directory driver?

Select one of the following:

Import the current driver packages 2) Install the driver packages 3) Deploy the driver 4)
Configure the driver 5) Start the driver
1) Install the driver packages 2) Import the current driver packages 3) Deploy the driver 4)
Configure the driver 5) Start the driver
1) Install the driver packages 2) Import the current driver packages 3) Deploy the driver 4) Start
the driver 5) Configure the driver
1) Import the current driver packages 2) Install the driver packages 3) Configure the driver 4)
Deploy the driver 5) Start the driver
1) Import the current driver packages 2) Install the driver packages 3) Deploy the driver 4) Start
the driver 5) Configure the driver

Explanation

Question 25 of 117

1

When installing the Active Directory Driver, which options are available when you are selecting the
desired form for the placement of new objects? (Choose 2.)

Select one or more of the following:

Flat
Level
Parallel
Mirrored
Structured
Bi-directional
Single Organizational Unit

Explanation

Question 26 of 117

1

In an Active Directory environment, which tools enable you to view and manage the associations
between drivers and objects? (Choose 2.)

Select one or more of the following:

Designer
Driver Inspector
Object Inspector
Policy Simulator
Active Directory Discovery tool

Explanation

Question 27 of 117

1

Which allows you to securely store multiple passwords for a driver?

Select one of the following:

Named Passwords
Universal Password
Password Policy object
Event Auditing Service
Password Synchronization

Explanation

Question 28 of 117

1

To which can you add Named Passwords? (Choose 2.)

Select one or more of the following:

Server
Drivers
Driver Sets
Applications
Identity Vaults

Explanation

Question 29 of 117

1

You have noticed that a server is not listed in the Servers tab on the driver or driver set. Which
may resolve this issue?

Select one of the following:

Revert back to an older driver.
Revert back to an older driver set.
Delete the problem driver and reinstall it.
Delete the related driver set and then reinstall it.
Disassociate the driver set object and the server and then re-associate them.

Explanation

Question 30 of 117

1

Which statements are true regarding Global Configuration Values (GCVs)? (Choose 2.)

Select one or more of the following:

GCVs are variables.
GCVs are constant values.
GCVs can be changed at runtime.
GCVs are accessible to the tree and network.
GCVs are globally accessible to the driver and driver set.

Explanation

Question 31 of 117

1

Which correctly shows the precedence of Global Configuration Values (GCVs)?

Select one of the following:

1) GCVs from the driver set Global Configuration list 2) GCVs from the driver Global
Configuration list 3) GCVs from the driver 4) GCVs from the driver set
1) GCVs from the driver set Global Configuration list 2) GCVs from the driver Global
Configuration list 3) GCVs from the driver set 4) GCVs from the driver
1) GCVs from the driver 2) GCVs from the driver set 3) GCVs from the driver Global
Configuration list 4)GCVs from the driver set Global Configuration list
1) GCVs from the driver 2)GCVs from the driver Global Configuration list 3) GCVs from the
driver set 4)GCVs from the driver set Global Configuration list

Explanation

Question 32 of 117

1

Which drivers have Remote Loader capability? (Choose 3.)

Select one or more of the following:

JDBC
LDAP
eDirectory
Active Directory
Entitlement Services

Explanation

Question 33 of 117

1

Which pre-defined jobs operate at the driver set level? (Choose 2.)

Select one or more of the following:

Driver Health
Schedule Driver
Subscriber Channel Trigger
Random Password Generator
Password Expiration Notification

Explanation

Question 34 of 117

1

What type of Identity Manager Event does a Subscriber Trigger Event Job create?

Select one of the following:

sync
query
modify
status
trigger
triggerless

Explanation

Question 35 of 117

1

Using iManager, what do you need to select to allow you to see the Filter icons so that you can
edit filters?

Select one of the following:

The Driver
The Driver Set
The Application
The Identity Vault

Explanation

Question 36 of 117

1

Which statements about filters are true? (Choose 2.)

Select one or more of the following:

You cannot export a filter from a driver.
You can configure a filter policy for a driver set.
You can add a class or attribute to a filter policy.
There are separate filter policies for the Publisher and the Subscriber channels.
The same filter policy is used for both the Publisher and the Subscriber channels.

Explanation

Question 37 of 117

1

Which policy primarily handles the conversion of data formats from data that the Metadirectory
engine provides to data that the application shim expects?

Select one of the following:

Creation policy
Matching policy
Placement policy
Input Transformation policy
Event Transformation policy
Output Transformation policy

Explanation

Question 38 of 117

1

When an XML document has an input tag type, which are supported inputs? (Choose 4.)

Select one or more of the following:

<add>
<copy>
<find>
<delete>
<format>
<modify>
<rename>

Explanation

Question 39 of 117

1

What is wrong with this add event?
<nds>
<input>
<add class-name="" event-id="idv-jdbc-staff#Publisher#696" qualified-src-dn="O=vault\OU=employees\CN=overtestra" src-dn="\IDVVAULT\vault\employees\overtestra" src-entry-id="136443">
<association state="pending"></association>
<add-attr attr-name="CN">
<value naming="true" timestamp="1206986293#34" type="string">overtestra</value>
</add-attr>
</add>
</input>
</nds>

Select one of the following:

The Class name is missing.
The timestamp is incorrect
The association state is pending.
The src-dn is improperly formatted.

Explanation

Question 40 of 117

1

Which Policy Sets are applied only during an add event?

Select one of the following:

Matching, Create, and Placement
Input Transformation, Matching, and Create
Matching, Create, and Schema Transformation
Input Transformation, Schema Transformation, and Command Transformation

Explanation

Question 41 of 117

1

When creating an argument within a rule, which is an example of a noun token?

Select one of the following:

Map
Join
Class Name
Lowercase
Escape Source DN

Explanation

Question 42 of 117

1

Which types of tokens are in the Argument Builder? (Choose 2.)

Select one or more of the following:

Verb
Noun
Action
Change
Attribute
Placement
Replacement

Explanation

Question 43 of 117

1

What are benefits of using Policy Builder? (Choose 2.)

Select one or more of the following:

It is built on open standards.
It enforces password complexity.
It is a GUI with command line capabilities.
It minimizes the need for XLST stylesheets.
It provides a graphical interface to help data cleansing.
It provides a graphical interface for rapid development of policies.

Explanation

Question 44 of 117

1

What is a purpose of the DAL (Directory Abstraction Layer)?

Select one of the following:

To process work flows
To grant/revoke entitlements
To store entities attribute data for use in work flows
To provide a customized view of objects and their attributes that are stored in the Identity Vault

Explanation

Question 45 of 117

1

Which options might you find in a Role Membership? (Choose 2.)

Select one or more of the following:

End Date
Start Date
Proxy User
Workflow Status
Separation of Duties

Explanation

Question 46 of 117

1

Which User Application configuration object contains Provisioning Request Definitions?

Select one of the following:

AppDefs
ServiceDefs
RequestDefs
ResourceDefs
WorkFlowDefs

Explanation

Question 47 of 117

1

Which aspects of the User Application can be controlled by customizing the themes in the User
Application?

Select one of the following:

Modifying the HTML layouts for individual portlets.
Assigning different themes to different users upon login to the User Application.
Changing the colors and logos used by the User Application pages, headers, footers and tabs.
Restricting the pages and tabs that are available to a particular user upon login to the User
Application.

Explanation

Question 48 of 117

1

Which allows you to delete, activate, inactivate and retire existing provisioning request definitions?

Select one of the following:

User Application Driver
User Application Portlets
Workflow Administration plug-in
Provisioning Request Configuration plug-in

Explanation

Question 49 of 117

1

The User Application Security Model uses domains to create sets of configurations and
permissions that can be assigned to different user types. Under the Provisioning domain, which
permission allows the user to retract selected provisioning requests when they are in progress?

Select one of the following:

Retract PRD
Initiate PRD
Configure Delegate
View Running PRD
Configure Availability

Explanation

Question 50 of 117

1

The Requests & Approvals tab in the Identity Manager user application includes a group of actions
called My Settings. The My Settings actions give you the ability to view your proxy and delegate
assignments. What is the difference between a proxy and a delegate?

Select one of the following:

A delegate assignment is independent of process requests.
A delegate assignment applies to a particular type of request.
A delegate assignment can only be given to a Team Manager.
A Provisioning Manager can only define delegate assignments
A delegate assignment can only be given to a Provisioning Manager.

Explanation

Question 51 of 117

1

The Roles hierarchy supports three levels. Which represents the highest role level?

Select one of the following:

Kaiser Role
Business Role
Resource Role
Technical Role
Workflow Role

Explanation

Question 52 of 117

1

Which System Role allows members to create, remove, or modify SoD constraints?

Select one of the following:

Role Auditor
Role Manager
Security Officer
Provisioning Administrator
User Application Administrator

Explanation

Question 53 of 117

1

Which statement is true regarding role relationships?

Select one of the following:

Roles cannot contain other roles.
Mid-level roles can contain lower-level and higher-level roles.
Bottom-level roles can be contained by higher-level roles and other bottom-level roles.
Top-level roles can contain lower-level roles, but they cannot be contained by other roles.

Explanation

Question 54 of 117

1

What role does NMAS play in synchronizing passwords in an Identity Manager solution?

Select one of the following:

NMAS controls the flow of synchronizing passwords within Identity Vault.
NMAS controls the flow of password synchronization in a connected system, based on NMAS
driver settings.
NMAS prevents legacy utilities that are not Universal Password-enabled from updating an NDS
password directly.
NMAS controls the flow of password synchronization, and prevents legacy utilities that are not
Universal Password-enabled from updating a password directly.
NMAS controls the flow of password synchronization in a connected system, and prevents
legacy utilities that are not Universal Password-enabled from updating an NDS password directly.

Explanation

Question 55 of 117

1

Only one policy is effective for a user at a time. Novell Modular Authentication Services (NMAS)
determines which policy is effective for a user by looking for policies in the following order and
applying the first one it finds. In which order does NMAS look for password policies?

Select one of the following:

1) Partition root container
2) Container
3) Specific user assignment
4) Login Policy Object
1) Specific user assignment
2) Login Policy Object
3) Partition root container
4) Container
1) Login Policy Object
2) Specific user assignment
3) Container
4) Partition root container
1) Specific user assignment
2) Container
3) Partition root container
4) Login Policy Object
1) Login Policy Object
2) Partition root container
3) Container
4) Specific user assignment

Explanation

Question 56 of 117

1

Which are advantages of using NDS password to synchronize passwords between two Identity
Vaults? (Choose 2.)

Select one or more of the following:

Simple configuration.
Universal and Distribution password updates
E-mail notifications for password synchronization failures
Enforcement of the basic password restrictions you can set for NDS Password
Password reset on the connected Identity Vault if the passwords don't comply with NMAS
password policy

Explanation

Question 57 of 117

1

Which allows you to change Universal Password in eDirectory? (Choose 2.)

Select one or more of the following:

iFilter
Designer
iManager
NWAdmin
IDM User Application

Explanation

Question 58 of 117

1

Which Identity Manager reporting component retrieves the data needed for report generation from
the Identity Information Warehouse?

Select one of the following:

Reporting Service
Report Packaging Tool
Data Collection Service
Identity Vault Data Sources
Data Collection Service Driver

Explanation

Question 59 of 117

1

Which report cannot be deleted and should not be run by itself?

Select one of the following:

Template
Identity Vault User Report
Identity Vault Driver Associations Report
Correlated Resource Assignment Events by User

Explanation

Question 60 of 117

1

What does the Calendar page of the Reporting Module show? (Choose 2.)

Select one or more of the following:

Report size
Report settings
Deleted reports
Finished reports
Reports that failed

Explanation

Question 61 of 117

1

Which statement is true regarding the token timeout strategy that is implemented by the Identity
Reporting Module?

Select one of the following:

The token associated with each user login times out automatically after a specific period of idle
time.
The token associated with each user login times out automatically after each event that affects
the user object.
The token associated with each user login times out automatically after a specific period of
time, after the user logs out.
The token associated with each user login times out automatically after a specific period of
time, regardless of what the user does.

Explanation

Question 62 of 117

1

Which Identity Manager component allows your organization to assure that user access to
resources does not break any corporate or government regulations?

Select one of the following:

Workflow
Attestation
Self Service
Data Synchronizing
Auditing and Reporting

Explanation

Question 63 of 117

1

When using Designer, what option allows you to manage and view the file resources that are in
your workspace?

Select one of the following:

Outline View
Project View
Dataflow View
Properties View
Navigation View

Explanation

Question 64 of 117

1

When using Designer, what option allows you to modify projects or other items that are listed in
the Navigator or Project view?

Select one of the following:

Views
Editors
Builders
Wizards

Explanation

Question 65 of 117

1

Which contains the components of Identity Manager drivers organized according to the
functionality you want to provide to a driver?

Select one of the following:

Driver Set
Packages
Entitlements
User Application
Roles Based Provisioning Module

Explanation

Question 66 of 117

1

Which statement is true regarding creating packages?

Select one of the following:

Packages can be created using Designer or iManager.
Packages must be created before a Driver can function.
Packages can only be created for Drivers and Driver Sets.
Packages can only be created in environments that have IDM 3.0 or later.
Packages can only be created when the Identity Vault is in development mode.

Explanation

Question 67 of 117

1

You are trying to add content to a package. You have created content in an item. You right-click
that item and select Add to Package; however, no packages are showing in the list. What is the
cause of this problem?

Select one of the following:

You must build a package before you can add content to it.
You must version a package before you can add content to it.
You must create a package in Designer before you can add content to it.
You must import a package into Designer before you can add content to it.

Explanation

Question 68 of 117

1

Which packages can be published?

Select one of the following:

Packages that have been built
Packages that have been created
Packages that have been imported
Packages that have been localized

Explanation

Question 69 of 117

1

When installing the Active Directory Driver, which options can you choose when selecting the
desired form for the placement of new objects? (Choose 2.)

Select one or more of the following:

Flat
Level
Parallel
Mirrored
Structured
Bi-directional
Single Organizational Unit

Explanation

Question 70 of 117

1

Which entitlement agent is ideal for simple automation?

Select one of the following:

Workflow
DIRXML-EntitlementRef
Role-Based Entitlement
Roles-Based Provisioning Module

Explanation

Question 71 of 117

1

Which statement about entitlements is true?

Select one of the following:

Entitlements are used as the association key for the user objects.
eDirectory schema is extended the first time Entitlements are invoked.
The DirXML-EntitlementRef attribute keeps track of the entitlements that a user has been
granted or revoked.
Entitlements that grant or revoke Group Membership will always take precedence over policies
that grant or revoke Group Memberships.

Explanation

Question 72 of 117

1

Which statement is true when creating your own Entitlements?

Select one of the following:

You create Entitlements using iMonitor.
You can only create Entitlements on the Publisher channel.
You must add the Entitlements to a driver set for them to work.
You must add a policy to the driver for the Entitlements to work.

Explanation

Question 73 of 117

1

Which domain defines rights to launch attestation requests and view the status of attestation
requests?

Select one of the following:

Role Domain
Resource Domain
Compliance Domain
Provisioning Domain
Configuration Domain

Explanation

Question 74 of 117

1

For which domains is it not possible to create Domain Managers? (Choose 3.)

Select one or more of the following:

Role
Resource
Security
Compliance
Configuration

Explanation

Question 75 of 117

1

Which users have access to the team configuration page? (Choose 2.)

Select one or more of the following:

Role Manager
Team Manager
Security Administrator
Resource Manager
Provisioning Manager

Explanation

Question 76 of 117

1

Which of the following can create teams? (Choose 3.)

Select one or more of the following:

Team Manager
Role Administrator
Security Administrator
Provisioning Manager
Resource Administrator
Compliance Administrator

Explanation

Question 77 of 117

1

In the Navigation Access Permissions page, who has access to the administration tab? (Choose
2.)

Select one or more of the following:

Security Administrator
Resource Administrator
Compliance Administrator
Provisioning Administrator
Configuration Administrator

Explanation

Question 78 of 117

1

At runtime, which performs all of the User Application’s LDAP queries against the Identity Vault?

Select one of the following:

The publisher filter
The Role Catalogue
The Abstraction Layer Protocol
User Application Administration
The Directory Abstraction Layer

Explanation

Question 79 of 117

1

Which defines the Provisioning request categories the user application can display?

Select one of the following:

Driver Filter
Role Catalog
Package Catalog
Global Configuration Values
The Directory Abstraction Layer

Explanation

Question 80 of 117

1

In which of the following is the directory abstraction layer editor plug-in available?

Select one of the following:

iMonitor
Designer
iManager
Role Mapping Administrator
User Application Administrator

Explanation

Question 81 of 117

1

Which is used to define Directory Abstraction Layer definitions?

Select one of the following:

Filter Editor
Policy Editor
Integration Activity Editor
Directory Abstraction Layer Editor
Provisioning Request Definition Editor

Explanation

Question 82 of 117

1

Which do you use to create and deploy provisioning requests to the User Application driver?

Select one of the following:

Filter Editor
Policy Editor
User Application Editor
Directory Abstraction Layer Editor
Provisioning Request Definition Editor

Explanation

Question 83 of 117

1

Which are directory objects that encapsulate the business rules for granting or revoking a
corporate resource or role, and binding the corporate resource or role to a workflow?

Select one of the following:

Role Mapping Definitions
Provisioning Request Definitions
Data Abstraction Layer Definitions
Global Configuration Values Definitions

Explanation

Question 84 of 117

1

When adding a control to a form that is being created, Designer adds a control-named Field to the
bottom line of the form. Where is the name that is entered into this field used? (Choose 3.)

Select one or more of the following:

The ECMA expression builder dialog box
The Create Resource Wizard’s General tab
The Workflow tab’s Data Item Mapping dialog box
In the Role Mapping Administration Authorization panel
An internal XML reference in the provisioning request definition file

Explanation

Question 85 of 117

1

Which statements are true regarding workflows? (Choose 3.)

Select one or more of the following:

An activity represents a task.
A process consists of activities and flow paths.
A flow path ties activities in a workflow together.
An activity represents the work to be processed.
An activity can have only one incoming and one outgoing flow path.

Explanation

Question 86 of 117

1

Which rules need to be followed when adding activities to a workflow? (Choose 3.)

Select one or more of the following:

A workflow cannot contain a condition activity.
Each Approval activity must have a Condition activity.
Each Branch activity must have a corresponding Merge activity.
Each workflow must have at least one Entitlement or Entity activity.
Each workflow must have only one Start activity and only one Finish activity.

Explanation

Question 87 of 117

1

Which rules need to be followed when adding flow paths to a workflow? (Choose 3.)

Select one or more of the following:

There can be multiple flow paths out of the Start activity.
There can be only one flow path out of the Merge activity.
There can be only one flow path out of the Branch activity.
There can be only one flow path out of the Entitlement activity.
There can be between one and five flow paths out of the Approval activity.

Explanation

Question 88 of 117

1

The Integration activity automatically creates an action model for working with a Web service
based on which document format?

Select one of the following:

CSV
TXT
XMI
XML
WSDL

Explanation

Question 89 of 117

1

In the Standard SoD Constraint Exception Approval Workflow Activity, which Activity Name determines whether the approval is a quorum condition?

Select one of the following:

Localize SoD Name
Approve SoD Conflict
Check for Processing Type
Approve SoD Conflict (Serial)
Approve SoD Conflict (Quorum)

Explanation

Question 90 of 117

1

Which statement is true regarding the Novell Identity Manager Role Mapping Administrator?

Select one of the following:

If you have both Role Manager and Resource Manager roles, you can create, edit, and delete
mappings.
If you have both Role Manager and Resource Administrator roles, you can create, edit, and
delete mappings.
If you have both Role Administrator and Resource Manager roles, you can create, edit, and
delete mappings.
If you have both Role Administrator and Resource Administrator roles, you can create, edit, and
delete mappings.

Explanation

Question 91 of 117

1

Within the Role Mapping Administrator, which displays the roles that you are authorized to
manage?

Select one of the following:

Systems list
Mappings list
Authorization list
Identity Vault Roles list

Explanation

Question 92 of 117

1

Which application is used to map authorizations to Identity Vault Roles?

Select one of the following:

iFilter
iManager
Designer
User Applications
Role Mapping Administrator

Explanation

Question 93 of 117

1

Using regular expressions, which will the following expression match? (Choose 2.)

of*

Select one or more of the following:

of
off
often
offset
offers

Explanation

Question 94 of 117

1

Using regular expressions, which matches ‘a’ or ‘b’?

Select one of the following:

“a\b”
“a.b”
“a*b”
“a|b”
“a:b”

Explanation

Question 95 of 117

1

Using regular expressions, which phone number should the following match?
.[89]00.[0-9]{3}.*[0-9]{4}

Select one of the following:

800-123-4567
901-123-4567
701-123-4567
808-123-4567
809-123-4567

Explanation

Question 96 of 117

1

What version of the W3C XPATH Recommendation does Identity Manager use?

Select one of the following:

1.0
1.1
1.5
2.0
2.1
3.5

Explanation

Question 97 of 117

1

Which XPATH operator is used to select all descendent nodes at any depth below the current
stated node?

Select one of the following:

*
|
@
&
//

Explanation

Question 98 of 117

1

If there is a name conflict between different variable sources in an XPATH statement, what is the
order of precedence?

Select one of the following:

Local (policy scope), Global, Local (driver scope)
Global, Local (driver scope), Local (policy scope)
Local (driver scope), Local (policy scope), Global
Global, Local (policy scope), Local (driver scope)
Local (policy scope), Local (driver scope), and global

Explanation

Question 99 of 117

1

Which are some best practices for using version control with Designer? (Choose 2.)

Select one or more of the following:

Use the Tortoise Subversion client.
Use the Subversion command line when possible.
Enable Subclipse before using version control with Designer.
Assign one person to deploy a project to a production environment.
Assign one team member to a policy rather than having multiple team members work on one
policy.

Explanation

Question 100 of 117

1

The following options are found within the forms tab of the Provisioning Request Definition Editor:
Form Selection
Fields tab
Actions tab
Events tab
Scripts tab
Which option allows you to add, delete, and change the data type, control type, and layout order of
the controls on the form?

Select one of the following:

Fields tab
Events tab
Scripts tab
Actions tab
Form Selection

Explanation

Question 101 of 117

1

Which default URL is used to access the iManager web application at 192.168.1.1?

Select one of the following:

http://192.168.1.1/
http://192.168.1.1/nps/iManager.html
https://192.168.1.1/nps/iManager.html
https://192.168.1.1:8443/iManager.html
https://192.168.1.1:8443/nps/iManager.html

Explanation

Question 102 of 117

1

Which statements are true regarding Designer? (Choose 2.)

Select one or more of the following:

Designer allows you to test policies off-line.
Designer allows you to perform any task on the live system.
Designer allows you to test and deploy solutions to production or test environments.
Designer does not allow existing solutions to be imported from the network into Designer.

Explanation

Question 103 of 117

1

When using Designer, what you can import at the Driver level?

Select one of the following:

Policies only
Channels and policies only
Driver sets and drivers only
A project from an Identity Vault
Driver sets, drivers, channels, and policies only

Explanation

Question 104 of 117

1

What is the naming convention for a Global Configuration Value (GCV)?

Select one of the following:

<name>.<group>.[<subgroup>.][<purpose/scope>]
<group>.[<subgroup>.][<purpose/scope>.]<name>
<group>.[<subgroup>.]<name>.[<purpose/scope>]
[<purpose/scope>.]<group>.[<subgroup>.]<name>
<name>.[<purpose/scope>.][<subgroup>.]<group>

Explanation

Question 105 of 117

1

You want to see password synchronization information when running a trace. What is the
minimum trace level that will provide this information?

Select one of the following:

Level 0
Level 1
Level 2
Level 3
Level 4
Level 5

Explanation

Question 106 of 117

1

Which statements are true when using Global Configuration Values (GCVs)? (Choose 2.)

Select one or more of the following:

GCVs can only be set on the Driver Set.
If you set GCVs on the Driver Set object, those values cannot be inherited by a driver.
If you set GCVs on the Driver Set object, those values are inherited by a driver and replace any
existing values.
If a driver has no settings of its own and inherits the GCVs from the driver set, iManager does
not display them.
If you set GCVs on the Driver Set object, those values are inherited by a driver in that driver set
if the driver does not have values of its own.

Explanation

Question 107 of 117

1

What eDirectory entities can Password Policies be assigned to? (Choose 3.)

Select one or more of the following:

Roles
Users
Groups
Partition Root Object
Login Policy Object

Explanation

Question 108 of 117

1

Which statements are true about Provisioning Request Definitions? (Choose 2.)

Select one or more of the following:

They are used to launch attestation workflows.
They are used to grant or revoke corporate roles.
They are used to provide policy rules.
They are used to filter requests at the driver level.
They are used to define Global Configuration Values.

Explanation

Question 109 of 117

1

Which is most commonly used to access ECMAScript?

Select one of the following:

iMonitor
iManager
Expression Builder
User Application Manager
Directory Abstraction Layer (DAL)

Explanation

Question 110 of 117

1

The Roles Based Provisioning Module includes a read-only Role Approval workflow. Which option
does this Role Approval workflow support? (Choose 2.)

Select one or more of the following:

The ability to display the role using localized display names
The ability to process SoD conflicts in either serial or quorum mode
The ability to process role approvals in either serial or quorum mode
The retrieval of SoD approver DNs from the request object (nrfRequest)
E-mail notification to all approvers per SoD conflict found for SoD workflow approvals

Explanation

Question 111 of 117

1

When using the Role Mapping Administrator to create a new role, you will need to select a level for
the role. Which level defines lower-level privileges?

Select one of the following:

IT Role
Mapping Role
Systems Role
Business Role
Permission Role

Explanation

Question 112 of 117

1

Given the XML Document below:
<nds dtdversion="3.5" ndsversion="8.x">
<source>
<product version="3.5.10.20070918 ">DirXML</product>
<contact>Novell, Inc.</contact>
</source>
<input>
<add class-name="User" qualified-src-dn="O=DA\OU=USERS\CN=E123456" src-dn="\DA-
TREE\DA\USERS\E123456" src-entry-id="34042" from-merge="true">
<add-attr attr-name="Facsimile Telephone Number">
<value type="structured">
<component name="faxNumber">801-555-1212</component>
<component name="faxBitCount">0</component>
<component name="faxParameters"/>
</value>
</add-attr>
<add-attr attr-name="Full Name">
<value type="string">Frank Jones</value>
</add-attr>
<add-attr attr-name="Given Name">
<value type="string">Frank</value>
</add-attr>
<add-attr attr-name="Internet EMail Address">
<value type="string">Frank.Jones@da.org</value>
</add-attr>
<add-attr attr-name="Surname">
<value type="string">Jones</value>
</add-attr>
</add>
</input>
</nds>
Within the Policy Builder Rule Conditions, what value will the XPATH Statement "@from-
merge='true'" return?

Select one of the following:

null
true
false
error
success

Explanation

Question 113 of 117

1

In which order does the metadirectory engine apply policies?

Select one of the following:

1) Matching policy 2) Placement policy 3) Creation policy
1) Matching policy 2) Creation policy 3) Placement policy
1) Creation policy 2) Placement policy 3) Matching policy
1) Creation policy 2) Matching policy 3) Placement policy
1) Placement policy 2) Creation policy 3) Matching policy
1) Placement policy 2) Matching policy 3) Creation policy

Explanation

Question 114 of 117

1

Which statement is true regarding the output that DSTrace generates?

Select one of the following:

Each policy can have only one rule.
Each rule is processed multiple times per event.
Rules will only be executed if their condition logic evaluates to be true.
IDM engine trace levels 0 through 3 show policies as they are being applied.

Explanation

Question 115 of 117

1

Which connected systems support bidirectional password synchronization? (Choose 3.)

Select one or more of the following:

PeopleSoft
Lotus Notes
JDBC databases
SAP
Novell eDirectory
Microsoft Active Directory
Network Information Services (NIS)

Explanation

Question 116 of 117

1

Which user type works with the User Application’s Identity Self-Service, Work Dashboard, and
Roles and Resource tabs and has no administrative permissions?

	Created by Giovanni Gonzalez Moreno over 7 years ago

IDM Quiz on Identity Manager Administrator, created by Giovanni Gonzalez Moreno on 16/03/2017.

Identity Manager Administrator

Question 1 of 117

When data changes in the Identity Vault or a connected application, which processes the changes?

Select one of the following:

Explanation

Question 2 of 117

Which statement is true?

Select one of the following:

Explanation

Question 3 of 117

Which statements are true? (Choose 2.)

Select one or more of the following:

Explanation

Question 4 of 117

What does a Driver object contain? (Choose 2.)

Select one or more of the following:

Explanation

Question 5 of 117

Identity Manager uses a MetaDirectory Engine to process Identity Vault data and events. What component assures changes in the Identity Vault are not lost if a connected system goes offline?

Select one of the following:

Explanation

Question 6 of 117

An Identity Manager Job can only interact with which driver channel?

Select one of the following:

Explanation

Question 7 of 117

Which installation mode is supported by the integrated installer?

Select one of the following:

Explanation

Question 8 of 117

Which statements about the Integrated Installer are true? (Choose 2.)

Select one or more of the following:

Explanation

Question 9 of 117

Which task within Novell iManager allows administrators to view all objects that are associated with a particular Novell IDM driver?

Select one of the following:

Explanation

Question 10 of 117

What is the minimum RAM system requirement for Designer?

Select one of the following:

Explanation

Question 11 of 117

When using Designer, which modeling mode is used to do all low-level operations with driver sets, drivers, policies and applications?

Select one of the following:

Explanation

Question 12 of 117

Which view enables you to view the filters that allow the data to flow between all of the systems and the Identity Vaults as well as view how passwords flow through the different systems?

Select one of the following:

Explanation

Question 13 of 117

When using Designer, a perspective is a collection of related views and editors. Which perspective should be open the first time you run the application?

Select one of the following:

Explanation

Question 14 of 117

Which view do you use to access Policy Simulator? (Choose 2.)

Select one or more of the following:

Explanation

Question 15 of 117

When you start Designer for the first time or start Designer without a project listed, which should you first do?

Select one of the following:

Explanation

Question 16 of 117

When using Designer, which view do you use to import driver sets, drivers, and channels from the file system?

Select one of the following:

Explanation

Question 17 of 117

When checking in a project to a Version Control Server, you will need to specify a file path to your Subversion server or a URL to the Subversion server. If you specify a URL, which protocols are supported? (Choose 4.)

Select one or more of the following:

Explanation

Question 18 of 117

When is the package catalog created?

Select one of the following:

Explanation

Question 19 of 117

Which statement is true regarding packages?

Select one of the following:

Explanation

Question 20 of 117

When you install Active Directory drivers, you must choose an authentication method. Authentication identifies the driver shim to Active Directory and, potentially, to the local machine. Which statements are true regarding the Negotiate authentication method? (Choose 2.)

When data changes in the Identity Vault or a connected application, which processes the
changes?

Identity Manager uses a MetaDirectory Engine to process Identity Vault data and events. What
component assures changes in the Identity Vault are not lost if a connected system goes offline?

Which task within Novell iManager allows administrators to view all objects that are associated
with a particular Novell IDM driver?

When using Designer, which modeling mode is used to do all low-level operations with driver sets,
drivers, policies and applications?

Which view enables you to view the filters that allow the data to flow between all of the systems
and the Identity Vaults as well as view how passwords flow through the different systems?

When using Designer, a perspective is a collection of related views and editors. Which perspective
should be open the first time you run the application?

When using Designer, which view do you use to import driver sets, drivers, and channels from the
file system?

When checking in a project to a Version Control Server, you will need to specify a file path to your
Subversion server or a URL to the Subversion server. If you specify a URL, which protocols are
supported? (Choose 4.)

When you install Active Directory drivers, you must choose an authentication method.
Authentication identifies the driver shim to Active Directory and, potentially, to the local machine.
Which statements are true regarding the Negotiate authentication method? (Choose 2.)

If you map the eDirectory attribute of Login Expiration Time to the Active Directory attribute of
accountExpires, when does the account in Active Directory expire?

When installing the Active Directory Driver, which options are available when you are selecting the
desired form for the placement of new objects? (Choose 2.)

In an Active Directory environment, which tools enable you to view and manage the associations
between drivers and objects? (Choose 2.)

You have noticed that a server is not listed in the Servers tab on the driver or driver set. Which
may resolve this issue?

Using iManager, what do you need to select to allow you to see the Filter icons so that you can
edit filters?

Which policy primarily handles the conversion of data formats from data that the Metadirectory
engine provides to data that the application shim expects?