Jeanie Fitzgerald
Quiz by , created more than 1 year ago

Class quiz (Class Quiz) Quiz on 2 SCS spaces and pathways, created by Jeanie Fitzgerald on 19/07/2017.

108
2
0
Jeanie Fitzgerald
Created by Jeanie Fitzgerald almost 7 years ago
Close

2 SCS spaces and pathways

Question 1 of 30

1

Entrance facilities may include ( select all that apply)

Select one or more of the following:

  • Entrance point to the building envelope

  • Demarcation point for SP and customer premise cabling

  • Primary surge protection devices

  • Transistion hardware

Explanation

Question 2 of 30

1

Where electrical and building codes apply, only listed cables can be used within a building structure except for an entrance cable that is transitioned or terminated. What is this rule referred to as.

Select one of the following:

  • 25 ft rule

  • 50 ft rule

  • 100 ft rule

Explanation

Question 3 of 30

1

There are multiple types of entrances to Entrance facility. Which is economical over the life cycle, preserves aesthetics, and provides security and physical protection.

Select one of the following:

  • Underground

  • Buried

  • Ariel

  • Tunnel

Explanation

Question 4 of 30

1

Which of the following preserves the aesthetic appearance, has low initial cost, but is inflexible to future service reinforcement or changes and requires a sleeve or conduit to enter the building.

Select one of the following:

  • Underground

  • Buried

  • Tunnel

  • Aerial

Explanation

Question 5 of 30

1

Which of the following applies to Aerial entrance to entrance facility

Select one or more of the following:

  • Provides low installation cost

  • Subject to traffic and pedestrian clearances

  • Does not affect aesthetics

  • Susceptible to environmental conditions ( ice loading, tree limbs, winds, lightning)

Explanation

Question 6 of 30

1

In wireless entrance using an existing equipment room, the WSP (wireless service provider) typically provides connection through existing SP (service provider) cabling.

Select one of the following:

  • True
  • False

Explanation

Question 7 of 30

1

Wireless entrance may use media converters to convert __________ ____________from the antenna to
__________ ___________ and into the DAS.

Select one of the following:

  • building/campus, interface/demarcation

  • copper cabling/optical fiber

  • service entrance/connecting hardware

Explanation

Question 8 of 30

1

An Equipment room generally houses equipment that...

Select one of the following:

  • Serves one floor of a building or portion of a floor

  • Serves an entire building, campus or customer

  • serves a dedicated local group of users

Explanation

Question 9 of 30

1

Which of the following is considered to be floor serving as opposed to building serving

Select one of the following:

  • Entrance facility

  • Telecommunication room

  • Equipment room

  • Telecommunication enclosure

Explanation

Question 10 of 30

1

Which of the following serves as a point of termination for horizontal and backbone cables on compatible connecting hardware

Select one of the following:

  • ER

  • EF

  • TR

  • TE

Explanation

Question 11 of 30

1

A telecommunication enclosure may be used in place of a telecommunication room.

Select one of the following:

  • True
  • False

Explanation

Question 12 of 30

1

Telecommunications pathways permit the placement of_______________and ______________ ____________that support the structured cabling system (SCS)

Select one of the following:

  • plenum and underfloor cable

  • equipment and patch cables

  • horizontal and backbone cables

Explanation

Question 13 of 30

1

While the local AHJ may allow its use, BICSI recommends that ______________ not be used inside commercial buildings.

Select one of the following:

  • ENT electrical non metallic tubing

  • FMT flexible metallic tubing

  • PVC polyvinyl chloride conduit

Explanation

Question 14 of 30

1

Which of the following should never be used for telecommunications cabling.

Select one of the following:

  • FMT

  • FMC

  • RMC

Explanation

Question 15 of 30

1

Fill ratio for new installation of conduit is ____% while the maximum fill ratio is ____%

Select one of the following:

  • 30%, 50%

  • 40%, 60%

  • 50%, 80%

Explanation

Question 16 of 30

1

Following fill ratio for firestoppng is critical since an _________________conduit cannot be effectively firestopped

Select one of the following:

  • overfilled

  • partially filled

  • empty

Explanation

Question 17 of 30

1

A stub up conduit terminates in a _______________ orientation while a stub out terminates in a _________________
orientation.

Select one or more of the following:

  • vertical/horizontal

  • horizontal/vertical

Explanation

Question 18 of 30

1

Cable trays and runways are commonly provided a minimum of ____ in. clearance above the pathway and do not contain more than ___ in. depth of cable.

Select one of the following:

  • 12, 6

  • 6, 6

  • 3, 6

Explanation

Question 19 of 30

1

A tubular stock ladder rack is manufactured with a depth of 1.5 and the width varies from 6 in. to 48 in.

Select one of the following:

  • True
  • False

Explanation

Question 20 of 30

1

Wire basket cable trays are available in three depths, choose all that apply

Select one or more of the following:

  • 2 in.

  • 4 in.

  • 6 in.

  • 8 in.

Explanation

Question 21 of 30

1

Open top cable supports are available in sizes for larger quantities of cable but are typically intended to support up to 50 cables between tray and work area.

Select one of the following:

  • True
  • False

Explanation

Question 22 of 30

1

A _____ covers an area generally associated with some or all of the space within a building. Workspace devices are connected to a centralized device ( switch or server)

Select one of the following:

  • WAN /wireless area network

  • CAN /campus area network

  • LAN /local area network

Explanation

Question 23 of 30

1

A _________ area network is created by linking two or more buildings that are in close proximity to each other.

Select one of the following:

  • CAN

  • LAN

  • WAN

Explanation

Question 24 of 30

1

This is a device that manages one or more resources shared by workstation users and administrators on a network.

Select one of the following:

  • Switch

  • Server

  • Router

Explanation

Question 25 of 30

1

This is a network access device that provides a centralized point for LAN communications.

Select one of the following:

  • Server

  • Switch

  • Router

Explanation

Question 26 of 30

1

This device makes it possible to segment an organizational network into multiple broadcast domains, also referred to as subnets and or subnetworks.

Select one of the following:

  • server

  • switch

  • router

Explanation

Question 27 of 30

1

For Data Centers, to aid in design, levels of redundancy have been established. These are listed as a class (0-4). Which ANSI/BICSI publication would cover this.

Select one of the following:

  • ANSI/BICSI 001-2009

  • ANSI/BICSI 002-2014

  • ANSI/BICSI 003-2014

Explanation

Question 28 of 30

1

Data centers may have multiple entrance rooms for redundancy, and the entrance room is typically located outside the computer room.

Select one of the following:

  • True
  • False

Explanation

Question 29 of 30

1

The computer room is the core of the data center. While it can be equated to the equipment room, there are several significant differences. Select all that apply

Select one or more of the following:

  • Cabinets and quantities ( multiple rows of multiple cabinets bolted together)

  • Cable density, (quantities of cables per cabinet can be up to 200 )

  • Bonding and grounding (may be installed and managed by electrical personnel)

  • UPS ( typically managed by electrical personnel)

Explanation

Question 30 of 30

1

Data centers have special regulations and rules that must be followed including security , work to be performed , safety, access, etc. Failure to comply will result in removal from the premises.

Select one of the following:

  • True
  • False

Explanation