Copy and Edit

Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete)

Description

Quiz on Aura Communication Manager (CM) and Communication Manager Messaging (CMM) R6.0 Implementation Exam (Complete), created by AndreCMartinez on 22/03/2015.
AndreCMartinez
Quiz by AndreCMartinez, updated more than 1 year ago
AndreCMartinez
Created by AndreCMartinez over 9 years ago
48
5
0

Resource summary

Question 1

Question
When troubleshooting a system fault, if the Web Interface or SAT are unavailable, which method should be used?
Answer
  • SAL
  • TTY2
  • CLI
  • MODEM

Question 2

Question
Which two series support RAID 5 configuration for CM6.0? (Choose two)
Answer
  • S8730 Server with 8 GB RAM
  • S8800 Server with 12 GB RAM
  • S8510 Server with 8 GB RAM
  • S8300D Server with 8 GB RAM

Question 3

Question
Hunt Group Number 99, with Group Extension 4199, is administered for messaging. Which command needs to be executed at the SAT terminal to troubleshoot hunt group 99?
Answer
  • Shoe tracelog huntgroup 4199
  • View logs real time huntgroup 99
  • Display real time logs hunt group 99
  • List trace hunt-group 4199

Question 4

Question
A customer needs to set up SIP integration on Communication Manager Messaging Application 6.0 What are three pieces of information that are needed to meet this requirement? (Choose three)
Answer
  • Signaling group number
  • SIP Domain
  • Transport Method
  • Extension length
  • Hunt Group number

Question 5

Question
Which three are tests that can be performed to verify a Communication Manager Messaging 6.0 application is working properly? (Choose three)
Answer
  • Verify the hunt group status
  • Check the messaging port status using the display port command
  • Call the messaging Hunt Group
  • Check the messaging port status using the status port command
  • Perform Message Waiting Indication test

Question 6

Question
On a Media Gateway G450, which slots are permitted for the MM 342
Answer
  • V1 and V2
  • V6 and V6
  • V3 and V8
  • V5 and V7

Question 7

Question
A customer is planning to upgrade from CM 5X to CM 6.0 an existing 8510 server. What is the total minimum memory requirement for this upgrade?
Answer
  • 4 GB RAM
  • 8 GB RAM
  • 12 GB RAM
  • 16 GB RAM

Question 8

Question
Which screen is used while upgrading the system platform from release 6.0.0.09 to release 6.0.0.11?
Answer
  • Communication manager Web interface
  • Console Domain > Server Management > Path management
  • Console Domain > Server Management > Platform Upgrade
  • Console Domain > Virtual Machine Management

Question 9

Question
Which three statements about CM_Duplex CM 6.0 are true?
Answer
  • Software duplication is available, but hardware duplication is not available.
  • The S8510 server is not used for duplication
  • Server duplication is configured via "Failover" option on CDROMs web interface
  • S8730 with DAL 2 card does not support server duplication in CM 6.0.
  • The CM duplex template supports CMM

Question 10

Question
Which gateway command resets the Gateway back to factory default?
Answer
  • Reset
  • Restart
  • Softboot
  • Nvram init

Question 11

Question
A technician wants to test and see if the voice channel between two IP phones. Which command in Site Administration Terminal (SAT) can be used to determine?
Answer
  • Status station <extension>
  • Status shuffling <extension>
  • List station <extension>
  • Test station <extension>

Question 12

Question
Which Ethernet port on S8800 server is for server duplication?
Answer
  • ETH0
  • ETH1
  • ETH2
  • ETH3

Question 13

Question
Which three commands are a part of Avaya Aura CM_survRemote_Embed templates? (Choose three)
Answer
  • Utility Services
  • CM 6.0
  • Session Manager
  • CMM 6.0
  • AES 6.0

Question 14

Question
A technician is planning to support to upgrade an Avaya communication Manager system to release 6.0 from release 5.2. Which two tasks must be performed during the upgrade procedure? (Choose two)
Answer
  • The S8700-Series Servers must be replaced by S8800 servers.
  • All G350 gateways must replaced by S8800 servers.
  • The Survivable Remote servers must be Upgraded to Release 6.0
  • The survivable Remote servers can stay at Release 5.2

Question 15

Question
In the navigation pane, what are the steps to create a test mailbox on the Communication Manager Messaging 6.0 Application?
Answer
  • Select messaging administration, then subscribe management, and then click add or edit.
  • Select messaging administration, the click new.
  • Select messaging administration, Select messaging administration, and then click add.
  • Select Forms control, and then at the command line run then add subscribe command.

Question 16

Question
When configuring a G450 Media gateway, which two port settings must be set? (Choose two)
Answer
  • FTP Server
  • 100 MB port speed
  • Auto-negotiation enabled
  • Full Duplex

Question 17

Question
A switch administrator wants to busy out trunk 53 for maintenance and administration work however, there is one call active on port 5 of the trunk. Which command should be extended from the SAT terminal to find out the IP addresses and port of the near-end and far-end node of the auto connection?
Answer
  • Status trunk 53/5
  • List trace port 53/5
  • Display trunk 53/5
  • Display trunk statistics 53/5
  • Status port 53/5

Question 18

Question
Which three objects can be downloaded from the product license delivery system (PLDS)? (Choose three)
Answer
  • Authentication file
  • Patches
  • Firmware updates
  • PuTTY
  • Communication manager templates

Question 19

Question
Which two statements describe the new procedures that a customer can use to directly and permanently turn ON or OFF licensed features in CM 6.0? (Choose two)
Answer
  • Customers can turn features ON or OFF using the change system parameters customer- options command on the system access terminal (SAT).
  • Customers can turn features ON or OFF using the system management interface features administration page.
  • Customers can PDLS directly to turn futures ON or OFF and then download and install a new license file with the updated features.
  • Customers can turn features ON or OFF using the WebLM server and the system platform management Console

Question 20

Question
Which statement describes the action to assure the CM_SurvRemoteEmbeded template was installed correctly?
Answer
  • From a browser, using the communication manager IP address, successfully log into the communication manager system management.
  • From a browser logged into communication Manager, Select administration > server (Maintenance)> server>Process Status. Click on view.
  • From a browser logged into the system Management Console verify cm, bsm, and utility_server and application status is running
  • When monitoring the template installation workflow status, verify the message. "Wizard completed successfully" displays.

Question 21

Question
Which three statements about when communication manager release 6.0 is deployed as a feature server are true? (Choose three)
Answer
  • It supports G450/G430 gateways.
  • It supports Analog trunks.
  • It supports SIP telephones.
  • It supports SIP trunks.
  • It supports Digital trunks.

Question 22

Question
When using the Avaya Site Administrator CEDI interface, which command would be used to check the configuration of telephone set with the extension of 1000?
Answer
  • Print station 1000
  • Display station 1000
  • Show station 1000
  • View station 1000

Question 23

Question
Which three statements are true for a configuration that consists of Duplicated S8800 main servers with a duplicated port network and is a survivable core? (Choose three)
Answer
  • Software duplication exists between the two main S8800 servers.
  • The two main servers have duplication IPSls
  • Hardware Duplication exists between the two main S8800 servers.
  • The main servers share a single control network
  • All Clam media and Medpro cards must be in a one subnet

Question 24

Question
A technician has installed pair or duplication S8800 servers with IPSI duplication. Which two procedures indicate that the duplicate IPSIs are both operated? (Choose two)
Answer
  • The enable operation of IPSI Duplication field on the display system-parameter duplication form is set to y.
  • IPSI circuit packs have been installed slots 1 and 2 carrier A and one of the IPSI LEDs is flashing
  • Execution of the test IPserver-interface command for both IPSI circuit packs shows PASS in the result column.
  • A paring test executed from the servers to the IPSIs and from the IPSIs to the servers returns success for the active IPSI and failure for the standby IPSI.

Question 25

Question
What are the recommended CLAN and MEDPRO port settings?
Answer
  • 10Mbps half duplex
  • 1000Mbps full duplex
  • 100Mbps full duplex
  • 100Mbps half duplex

Question 26

Question
Which two statements are true regarding a media gateway full back (recovery) to main (primary) servers? (Choose two)
Answer
  • All active (stable) Ip calls on the media gateway drop when the media gateway falls back from the survivable remote server to the main server.
  • The list survivable-processor command can be used to confirm that the remote Survivable server is registered to the main server and that the remote survivable server is no longer active.
  • When the main server recovers it issues registration requests to all the media gateways in the network.
  • Executing the status media-gateways command from the main server will show which media gateways are registered with the main server.

Question 27

Question
To confirm that a survivable server is currently registered to the main CM servers, using the SAT. Which command should be entered?
Answer
  • Status ess clusters
  • Display survivable-processors
  • Status ess port-networks
  • Status survivable-processors

Question 28

Question
A customer wants to enable audio encryption for Ip phone calls, but the option is not available on any IP- codec-set. Which procedure must be followed to obtain this feature?
Answer
  • From the SAT, type change system-parameter customer-options. Find the media encryption over IP field, and set the option to Y. Save the change
  • From the SMI Feature administration page, find the media Encryption over IP field Set the option to Y. save the changes
  • From the system platform WebLM page. Find the media Encryption over IP field set the option to Y. Save the changes.
  • From the Aura System Manager's Feature Server Administration page. Find the media encryption over IP field, and set the option to Y. save the changes.

Question 29

Question
Which statement describes the action to assure the system platform was installed correctly?
Answer
  • From the laptop connected to the network, ping the dom0 IP address and verify a successful response.
  • Immediately after the installation, verify the DVD is ejected from the drive and that the server reboots.
  • After connecting the server using PuTTY and logging in as root, verify there are no errors when running the xm list command.
  • From the system management console browser, verify domain-0 and cdom are running

Question 30

Question
Which statement is true about duplex servers in CM 6.0?
Answer
  • The survivable remote Duplex template includes branch session manager
  • CM uses the high availability that system platform can now provide
  • The license for the survivable server is different than the license file of the main server
  • The main and all survivable servers require an authentication file

Question 31

Question
System platform web console is used to apply the service pack for which three virtual machines? (Choose three)
Answer
  • System Platform
  • AES 6.0
  • Utility Server
  • Communication Manager 6.0
  • CMM 6.0

Question 32

Question
Which procedure must be followed while, migrating from CM 5.2.1 (S8800 Server with 2 HDD) to CM 6.0?
Answer
  • Insert 3rd hard drive, run raid CD, and than run raid CD after rebooting.
  • Take backup, store the backup locally, insert 3rd hard drive, and then run Raid CD after rebooting.
  • Insert the raid CD, reboot the server, and than take backup.
  • Insert the hard drive and the 3rd hard drive is incorporated automatically.

Question 33

Question
Which communication manager 6.0 command is used to add a new survivable?
Answer
  • add surviveable-processor
  • add survivable-processor ess <node-name>
  • add survivable-processor core
  • add survivable-processor <node-name>

Question 34

Question
Which Ethernet port on S8800 server is connected to the customer network?
Answer
  • ETH0
  • ETH1
  • ETH2
  • ETH3

Question 35

Question
When using the Avaya Site Administration GSDI interface, which command would be use to built a new telephone set with the extension of 1000?
Answer
  • New station 1000
  • Add station 1000
  • Build station 1000
  • Add set 1000

Question 36

Question
Which two components are part of the Avaya Aura CM_Simplex template? (Choose two)
Answer
  • Utility services
  • CM 6.0
  • Session manager 6.0
  • Avaya Enablement Services (AES)

Question 37

Question
When using the Avaya Site Administrator GEDI interface, which command would be used to confirm the media gateway number 3 is registered?
Answer
  • Show media-gateway 3
  • Display media-gateway 3
  • Print media-gateway 3
  • View media-gateway 3

Question 38

Question
For Avaya Aura CN6.0, how is the license file installed on the server?
Answer
  • By accessing the web interface of CM
  • Using the load license command through shell prompt of CM
  • Through the web interface of DOM0
  • Using the web interface of Console Domain

Question 39

Question
Concerning the type of integration with communication manager, on the navigation pane, where is the communication manager messaging 6.0 application mentioned or configured?
Answer
  • Click the system wide Messaging parameters, than switch integration type field.
  • Click the switch link administration, and then switch type.
  • Click integration type
  • Click Switch Link Administration, then Switch Link Admin, and then Switch Integration Type field

Question 40

Question
A small enterprise customer needs 450 SIP / H.323 users. Which CM 6.0 template will be the most economical solution?
Answer
  • CM_Simplex
  • CM_survRemote_Embeded
  • CM_Duplex
  • CM_onlyEmbeded

Question 41

Question
For the Duplex S8800 servers running CM 6.0, by default which Ethernet port communication with IPSts?
Answer
  • Eth0
  • Eth1
  • Eth2
  • Eth3

Question 42

Question
When configuring the G450 Media gateway using the Gateway CLI interfaces which command would be used to view the serial number and software status?
Answer
  • Show serial number
  • Show system
  • Print G450
  • Show G450

Question 43

Question
Which three elements are needed to CLAN IP interface? (Choose three)
Answer
  • Network region
  • Gateway node name
  • Node name
  • Duplicate node name
  • link

Question 44

Question
Which three procedures are used to determine whether a gateway with a survivable remote server has lost its H.248 link (connection) to the main (Primary) servers? (Choose three)
Answer
  • Execute the communication manager command display alarms, to set whether the link loss delay timer has expired.
  • Execute the communication manager command display alarms, to see whether the no service timeout timer (NSTT) has expired.
  • Execute the SAT command list media-gateway from the remote survivable server, to determine whether media gateway is registered to the survivable server.
  • Execute the SAT command list media-gateway to determine which media gateways are not registered to the main server.
  • Execute the command status H.248 link from the remote gateway, to determine whether the link to the main server is active.

Question 45

Question
A user at a remote branch location is registered to a G450 media Gateway connected via processor Ethernet (PE) to a main communication manager in the core. They report that they are no longer able to place calls to users at the core. Which three procedures can be used to diagnose the source of problem? (Choose three)
Answer
  • Confirm that the registered field on the Communication Manager displays media-gateway to Y.
  • Conform that the PE interface is active by executing the communication manager display processor Ethernet command and confirm that the allow H.248 Gateway field is set to Y.
  • Use the show MGC command on the media gateway to confirm the IP address of the PE enabled server at the core is administered as the primary controller of the media gateway.
  • Use the list registered -P -station command on the communication manager to determine whether the user on the media gateway is registered.
  • Use the list survivable processor command to confirm that the survivable server is registered to the main communication manager.

Question 46

Question
How is the status of virtual machines (eg.DOM-0, CDOM-0, CM 6.0) on S8800 server checked?
Answer
  • By going to the home page of console domain.
  • By going to the homepage of Avaya communication manager.
  • By going to the home page of Dom 0
  • By using the internet explorer http://Cdom .lpaddr/vm

Question 47

Question
Which circuit pack provides an IP Server interface in an Avaya G650 Gateway?
Answer
  • TN2312BP
  • TN2342Ac
  • MM711
  • MM714

Question 48

Question
A technician is asked to retrieve a maintenance log for CMM that shows the information for 8"00 AM to 5:00 PM local tome that day. Which shell command should be executed to retrieve the maintenance log?
Answer
  • Show main log 0800 101010
  • Displog-1 maint-d 10/10/10 08:00
  • Print log for maint 101010 08:00
  • Print-1 maint-d 08:00 10/10/10

Question 49

Question
Which MAC address is recommended for the license file?
Answer
  • The MAC address of the Console domain
  • The MAC address of the CM eth0 port
  • The MAC address of the CM host name
  • The MAC address of the DOM0

Question 50

Question
A newly installed main Cm 6.0 server indicates it is in license error mode. A technician again 45 minutes later and it is still in error mode. The license was installed from the system management interface (SMI)? Which statement describes the reason for the error mode?
Answer
  • The installer used the wrong interface to install the license and it is therefore not installed.
  • The server cannot communicate with the IPSI or media gateway whose serial number was used in the license file.
  • The license audit runs every 60 minutes and the error will be resolved in 15 minutes.
  • The installer loaded a license for one of the survivable servers, not the main server, and the IPSIs, media Gateways, and/or IP phones have registered to it

Question 51

Question
The backup communication Manager, what two choices does the customer have? (Choose two)
Answer
  • Backup/restore
  • Backup now
  • Schedule backup
  • Backup/restore later

Question 52

Question
A user at extension 1111 complaints that when dialing extension 2222, the call is the call is unexpectedly answered by a person at extension 3333. All other calls made are connected as expected. There is not display on the phone. While at the SAT, the technician has the user repeat the call to extension 2222. Which command identifies the reason this phone call is behaving in the expected way?
Answer
  • List trace station 1111
  • List trace station 3333
  • Status station 1111
  • Display station 3333

Question 53

Question
Which greeting should be received when you are calling the messaging Hunt group?
Answer
  • Welcome to Audix
  • Welcome to messaging
  • Your call is being answered by Audix
  • Please leave a message after the tone

Question 54

Question
What two pieces of information does the product licensing and delivery system (PLDS) required to be entered for a license file to be generated? (Choose two)
Answer
  • Serial number
  • License activation code
  • MAC address
  • Platform type

Question 55

Question
Which statement describes the action to assure the CM_Simplex Template was installed correctly?
Answer
  • From browser logged into Systen Management Console, verify cm and utility_Server appear and application state is running.
  • From a browser using the communication Manager IP address, successfullylog into the communication manager system management interface (SMI)
  • When monitoring the template installation workflow status, verify the message, "Wizard completely successfully" displays.
  • From a browser logged into communication manager, select administration > server( maintenance)> server>process status, click on view and verify communicaMgr appears

Question 56

Question
A customer has selected Avaya Aura CM_survremote_embedded template. Which Avaya server should be used?
Answer
  • S8730 Server 8Gb RAM
  • S8800 Server
  • S8510Server with 8GB RAM
  • S8300D Server

Question 57

Question
Which two statements regarding shuffling and hairpining are true? (Choose two)
Answer
  • Hairpining does not use media processor resources.
  • The audio connection type field on the communication manager status station formation can be used to determine whether a call is shuffled.
  • A call between a DCP endpoint and H.323 end point can be shuffled.
  • Shuffling release media processor resources.

Question 58

Question
Which Avaya G450 Module provides 8 DCP ports?
Answer
  • MM711
  • MM712
  • MM7202
  • TN2224

Question 59

Question
A network failure prevents communication between all the port networks (IPSIs) and there main CM servers. What is the maximum number of port networks (IPSIs) that can be registered to a survivable remote embedded server?
Answer
  • no port network
  • 63 port networks
  • 64 port networks
  • 126 port networks

Question 60

Question
Which three servers can be upgraded to communication manager Release 6.0? (Choose three)
Answer
  • S8300C
  • S8300D
  • S8510
  • S8800

Question 61

Question
A customer has a communication Manager R6.0 system with IP phones and some older TDM phone, and says there is no dial tone for all of the IP phones. All of the hardware has been verified to be working properly. Which two steps can be taken to identify the cause of problem? (Choose two)
Answer
  • Verify that the TN2602 Media resources circuit pack has the correct IP settings.
  • Verify that the processor Ethernet mode is enabled in the Server.
  • Set a static IP address on a laptop and see if the server can be pined
  • Set a static IP address on a laptop and see if the TN2602 Media Resource circuit pack can be pinged.

Question 62

Question
To ensure the communication manager messaging application is working, what are three tests that can be performed? (Choose three)
Answer
  • Call one of the two stations that you set as subscriber to the messaging server, and let the call go to coverage
  • Leave message on a covered call and verify that the message waiting indicator (MWI) lamp on the receiving extension is lit.
  • Call the station and after the call is answered leave a message.
  • Call the messaging hunt group from any of the stations to ensure it is answering.
  • Log into communication manager messaging to verify CDOM is running.

Question 63

Question
Which statement describes how the communication message application is enabled the first time after the installation?
Answer
  • Connect the SAT terminal login using the craft, and then enable using the enable messaging command.
  • Open the communication manager IP address using web browser. Login as craft, click installation, than communication manager messaging.
  • Open the communication manager IP address using web browser. Login as craft; click Administration, then server (maintenance), than click miscellaneous, than messaging software, and than click enable
  • Communication manager messaging is enabled by default after the installation.

Question 64

Question
Through which protocols can integration of communication manager messaging application 6.0 with communication manager occur? (Choose two)
Answer
  • H.323/Q. Sig protocol
  • RTP protocol
  • SSP protocol
  • SIP protocol

Question 65

Question
An administrator has just installed a 9620 IP Phones on an existing system. The command change IP network-map is use to administer the phone into to network region 100. All other phones are in network region 1. Like all other 9620 phones on this system, this one successfully gets IP address information fro, the one DHCP server. However, the new phone fails to register with CM. Which two statements describe the cause of the problem? (Choose two)
Answer
  • Neither PROCR nor CLANs were administered in network region 100
  • There are no Medpros or H.248 Media Gateways administered in network region 100
  • Network region 100 is not configured to communicate with other network regions
  • On the IP interface form, some one recently set the field "Allow H.323 registration" to `n'

Question 66

Question
Which statement describes how the licensed mailboxes are enabled on a communication manager messaging application 6.0?
Answer
  • Mailboxes are enabled in the communication manager 6.0 license file.
  • Mailboxes are enabled by a separate license that needs to be generated and deployed.
  • Mailboxes are enabled by default.
  • Mailboxes are enabled in the system Parameter features form.

Question 67

Question
On a media gateway G450, into which Slot does the S8300 D server blade need to be inserted?
Answer
  • V1
  • V2
  • V4
  • V8

Question 68

Question
Which two hardware components support CM_survRemote template? (Choose two)
Answer
  • S8730 Servers with 8 GB RAM
  • S8800 Servers
  • S8510 Server with 8 GB RAM
  • S8300D Server

Question 69

Question
In which two modes is communication manager release 6.0 deployed? (Chose two)
Answer
  • Feature Server
  • Signal Servers
  • Evolution Server
  • System Management
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

GCSE Maths Quiz
Andrea Leyden
Geography Restless Earth
sophieelizabeth
Conceptos Generales De Robótica
fede ramos
UNIT 1 DIGITAL MEDIA SECTORS AND AUDIENCES
carolyn ebanks
English Language Techniques
lewis001
Biology - the digestive system
Oliviax
med chem 2 final exam
lola_smily
Pathos in Battle
mouldybiscuit
3.1 Keywords - Marketing
Mr_Lambert_Hungerhil
Repaso Revalida PR 2016
Rodrigo Lopez
General Pathoanatomy Final MCQs (301-400)- 3rd Year- PMU
Med Student
Browse Library