Copy and Edit

Haber and Contact Process

Description

GCSE Chemistry Quiz on Haber and Contact Process, created by lisawinkler10 on 05/14/2015.
lisawinkler10
Quiz by lisawinkler10, updated more than 1 year ago
lisawinkler10
Created by lisawinkler10 over 9 years ago
1075
4
0

Resource summary

Question 1

Question
The following questions are on the Haber process. What is the process used for?
Answer
  • The manufacture of Sulfuric Acid
  • The manufacture of Ammonia
  • The manufacture of Nitrogen
  • Cracking hydrocarbons

Question 2

Question
Tick what Ammonia is made of
Answer
  • Nitrogen
  • Hydrogen
  • Carbon
  • Oxygen

Question 3

Question
Which two could hydrogen be obtained from?
Answer
  • Natural gas
  • Cracking of hydrocarbons
  • Burning sulfur in air
  • Electrolysis of water

Question 4

Question
The nitrogen is obtained from air
Answer
  • True
  • False

Question 5

Question
The reaction for the Haber Process is: N2 + 3 H2 ⇌ 2 NH3 (ΔH = −92.4 kJ·mol−1)
Answer
  • True
  • False

Question 6

Question
The equilibrium position is shifted to the right hand side for a high yield by...
Answer
  • using a low temperature and a high pressure
  • using a high temperature and a high pressure
  • using a high temperature and a low pressure
  • using a low temperature and a low pressure

Question 7

Question
What is the pressure used?
Answer
  • 2 atmospheres
  • 4 atmospheres
  • 50 atmospheres
  • 200 atmospheres

Question 8

Question
What reasons make a high pressure very expensive?
Answer
  • A lot of energy needed to compress the gases
  • Thick-walled pipes and reaction containers are needed
  • Dangerous so requires pressure safety equipment
  • Releases fossil fuels

Question 9

Question
What temperature is used as a compromise between rate and yield?
Answer
  • 450℃
  • 200℃
  • 1000℃
  • 50℃

Question 10

Question
What is the most economical catalyst?
Answer
  • Iron
  • Sodium
  • Magnesium
  • Lead

Question 11

Question
Under the conditions, how much hydrogen and nitrogen is converted into ammonia?
Answer
  • 98%
  • 15%
  • 60%
  • 100%

Question 12

Question
What happens to the unreacted nitrogen and hydrogen?
Answer
  • Passed again into the reaction chamber
  • Disposed of
  • Sent for analysis
  • Released into the environment to promote global warming

Question 13

Question
What happens to the ammonia?
Answer
  • It leaves the reaction vessel and is cooled, liquefied and tapped off.
  • It stays in the reaction vessel and is cooled, liquefied and tapped off.
  • It leaves the reaction vessel and is cooled, solidified and removed.
  • It stays in the reaction vessel and is cooled, solidified and tapped off.

Question 14

Question
What is ammonia used for?
Answer
  • Manufacture of fertilisers
  • Manufacture of nitric acid
  • Manufacture of nylon
  • Manufacture of steel

Question 15

Question
The following questions are on the Contact process. What is it used for?
Answer
  • Manufacture of sulfuric acid
  • Manufacture of ammonia
  • Manufacture of fertilisers
  • Manufacture of Copper Oxide

Question 16

Question
Stage 1 of the contact process is making sulfur dioxide: S(s)+O2(g)→SO2(g). How is this done?
Answer
  • By burning sulfur in air
  • By reacting it with oxygen
  • By absorbing it in oxygen
  • By diluting it with oxygen

Question 17

Question
Stage 2 of the contact process is making sulfur trioxide: 2SO2(g)+O2(g)⇌2SO3(g) ΔH=−196kJ/mol. How is this done?
Answer
  • Sulfur dioxide is reacted with oxygen
  • Sulfur dioxide is burnt in air
  • Sulfur dioxide is absorbed into oxygen
  • Sulfur dioxide is diluted with oxygen

Question 18

Question
It is called the contact process because in stage 2, the two gases react together in contact with a solid catalyst, Vanadium(V) Oxide
Answer
  • True
  • False

Question 19

Question
The forward reaction is exothermic so the yield would be increased by using a low temperature but due to rate of reaction, it is carried out at 450℃
Answer
  • True
  • False

Question 20

Question
There are fewer molecules on the right so the yield would increase with pressure, but as the yield is already 98%, what is the pressure used?
Answer
  • 2 atmospheres
  • 200 atmospheres
  • 50 atmospheres
  • 1000 atmospheres

Question 21

Question
Stage 3 of the contact process is making oleum: H2SO4(l)+SO3(g)→H2S2O7(l). How is this done?
Answer
  • Sulfur trioxide is absorbed into concentrated sulfuric acid
  • Sulfur trioxide is burnt with concentrated sulfuric acid
  • Sulfur trioxide is dissolved into concentrated sulfuric acid
  • Sulfur trioxide is diluted with concentrated sulfuric acid

Question 22

Question
The next part of stage 3 makes a concentrated solution of sulfuric acid out of oleum: H2S2O7(l)+H2O(l)→2H2SO4(aq). How is this done?
Answer
  • Oleum is diluted with water
  • Oleum is is rinsed with water
  • Oleum is recycled into water
  • Oleum is neglected by his parents
Show full summary Hide full summary

Want to create your own Quizzes for free with GoConqr? Learn more.

Similar

Ionic Bondic Flashcards.
anjumn10
Electrolysis
lisawinkler10
Chemistry General Quiz - 2
lauren_johncock
Chemistry Quiz General -3
lauren_johncock
AS Chemistry - Enthalpy Changes
Sarah H-V
The Periodic Table
asramanathan
Acids, Bases and Salts
asramanathan
Introduction to the Atom
Derek Cumberbatch
Chemical Symbols
Keera
Organic Chemistry
Ella Wolf
Acids and Bases
Sarah Egan
Browse Library