Question 1
Question
The two primary purposes of physical security are protection and _______________?
Answer
-
Security-in-depth
-
Prevention
-
Point security
-
Area security
Question 2
Question
A guard checking IDs at the gate of an installation is a good example of what type of security?
Answer
-
Security-in-depth
-
Prevention
-
Point security
-
Area security
Question 3
Question
___________ is the layering of physical security countermeasures such as fencing, guards, cameras, lighting, and locks.
Answer
-
Security-in-depth
-
Prevention
-
Point security
-
Area security
Question 4
Question
Before you can conduct a risk analysis based on the impact and likelihood of an unwanted event happening, what steps in the risk management process must you take first?
Question 5
Question
Which policy guidance would you consult to find the minimum standards for the physical protection of DoD assets?
Answer
-
DoD 5200.08-R, Physical Security Program
-
DoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
-
DoDM 5200.01, Volumes 1-4 DoD Information Security Program
Question 6
Question
Which policy should you consult to find the physical security requirements of protecting classified information?
Answer
-
DoD 5200.08-R, Physical Security Program
-
DoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
-
DoDM 5200.01, Volumes 1-4 DoD Information Security Program
Question 7
Question
Which policy authorizes commanders to issue regulations for the protection or security of property and places under their command?
Answer
-
DoD 5200.08-R, Physical Security Program
-
DoDI 5200.08, Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB)
-
DoDM 5200.01, Volumes 1-4 DoD Information Security Program
Question 8
Question
Who is charged with management, implementation, and direction of all physical security programs?
Question 9
Question
Who is responsible for providing valuable information on the capabilities, intentions, and threats of adversaries?
Question 10
Question
Who is responsible for developing countermeasures against potential threats to national security and other DoD assets?
Question 11
Question
Which of the following individuals should be included in a Threat Working Group?
Answer
-
Antiterrorism Officer
-
Counterintelligence (CI) representative
-
Law enforcement representative
-
Operations security officer
-
Information operations representative
-
Chemical, biological, radiological, nuclear and high yield explosive representative
Question 12
Question
Which of these can be made of solid steel to make them more attack resistant?
Answer
-
Walls
-
Doors
-
Windows
-
Roofs
Question 13
Question
Which of these house ventilation systems that should be secured with steel bars?
Answer
-
Walls
-
Doors
-
Windows
-
Roofs
Question 14
Question
Which of these should be covered with a protective film to make them less dangerous in an attack?
Answer
-
Walls
-
Doors
-
Windows
-
Roofs
Question 15
Question
Which of the following locks are approved to secure classified information or material?
Answer
-
Kaba Mas X-10
-
S&G 8077/AD
-
S&G 833 C
Question 16
Question
Standby lighting is used when regular lighting is not available.
Question 17
Question
Site lighting is used to enable guard force personnel to observe activities inside or outside the installation.
Question 18
Question
Movable lighting is used when supplemental lighting is needed such as at construction sites.
Question 19
Question
At a minimum _________ should include special and general guard orders, access and material control, protective barriers, lighting systems, locks, and Intrusion Detection Systems (IDS).
Question 20
Question
________ establish duties, roles, and responsibilities at individual assignments, checkpoints, gates, and guard posts.
Question 21
Question
___________provide supplemental guidance for physical security programs and establish procedures for emergency events as well as operational and administrative procedures.
Question 22
Question
Commanders may only implement measures according to the FPCON level in force at the time.
Question 23
Question
Commanders must comply with and integrate DoD physical security and installation access control policies into their FPCON plans.
Question 24
Question
Commanders educate their personnel on the insider threat to DoD elements and personnel.
Question 25
Question
Which threat level signifies terrorists are present but there are no indications of anti-U.S. activity and the Operating Environment favors the Host Nation or the U.S.?
Answer
-
High
-
Moderate
-
Low
-
Significant
Question 26
Question
Who is responsible for assessing requirements for physical security and conducting criticality, vulnerability, and risk assessments?
Answer
-
Antiterrorism Working Group
-
Threat Working Group
-
Antiterrorism Executive Committee
-
Mission Assurance Senior Steering Group
Question 27
Question
Commanders should comply with and integrate DoD physical security and installation access control policies into their Force Protection Conditions (FPCON) plans.
Question 28
Question
______________ are provided to senior leaders to assist in determining the appropriate Force Protection Condition (FPCON) level.
Question 29
Question
Which of the following establishes duties and responsibilities that assist in maintaining operational order during both normal and stressful situations?
Answer
-
Standard Operating Procedures and the Physical Security Plan
-
Post Orders and the Physical Security Plan
-
Standard Operating Procedures and Post Orders
Question 30
Question
Select ALL the correct responses.
Which of the following are facility access control procedures?
Question 31
Question
Inspections can ensure compliance with the physical security plan, verify policy compliance, and promote cost effective security.
Question 32
Question
Site lighting supplements other protective measures.
Question 33
Question
Who is responsible for identifying threats and informing the installation Commanding Officer on current threats?
Answer
-
Mission Assurance Senior Steering Group
-
Threat Working Group
-
Antiterrorism Executive Committee
-
Antiterrorism Working Group
Question 34
Question
The primary purpose of physical security is prevention and protection.
Question 35
Question
When required, the two-person concept may be part of a facility access control method.
Question 36
Question
Select ALL the correct responses. Which of the following are appropriate physical security countermeasures?
Question 37
Question
Which of the following implements the physical security aspects of protecting classified information?
Answer
-
DoDM 5200.01
-
DoD 5200.08-R
-
DoDI 5200.08
Question 38
Question
Who is responsible for physical security planning, coordination, and integration of identified mission essential capabilities?
Question 39
Question
Select ALL the correct responses.
Security Forces may be comprised of which of the following?
Question 40
Question
Which of the following best defines security-in-depth?
Answer
-
The use of fencing around the perimeter of a structure
-
The use of barriers around the perimeter of a structure
-
The layering of physical security measures through the application of active and passive complementary security controls
Question 41
Question
Which of the following physical security countermeasures serve as a security system response force?
Question 42
Question
Which step in the risk management process is designed to identify and assess the perceived imminence of intended aggression by a capable entity to harm a nation, a government, or its instrumentalities?
Answer
-
Identify and assess Threats
-
Identify and assess Vulnerabilities
-
Determine Countermeasure Options
-
Identify and assess Assets
Question 43
Question
Which of the following typically establish duties, roles, and responsibilities at individual assignments, checkpoints, and gates?
Question 44
Question
Who is responsible for supporting antiterrorism concerns, efforts, and emergency response and law enforcement activities?
Question 45
Question
What regulation covers Physical Security?
Question 46
Question
What regulation covers Information Security?
Answer
-
DODM 5200.01 (Vol 1-4)
-
DOD 5200.08-R
Question 47
Question
What is the Primary purpose of Physical Security?
Answer
-
PREVENTION
-
PROTECTION
-
PREPARATION
Question 48
Question
Which policy should you consult to find the physical security requirements of protecting classified information?
Answer
-
DOD 5200.08-R
-
DODI 5200.08
-
DODM 52001.01, Vol 1-4
Question 49
Question
Which policy authorizes commanders to issue regulations for the protection or security and places under their command?
Answer
-
DOD 5200.08-R
-
DOD5200.08
-
DODM 5200.01, Vol 1-4
Question 50
Question
Well-designed _______________, including detection, deterrence, delay, denial, and notification, are accomplished through the development of a plan outlining who will do what, where, when, and how.
Question 51
Question
The _____________ system allows commanders to be flexible and adaptable in developing and implementing antiterrorism measures that are more stringent than those mandated by higher authorities whenever they are invoked.
Question 52
Question
Who is responsible for developing and maintaining physical security plans, establishing standard policies and procedures for a facility and/or installation?
Question 53
Question
Select ALL the correct responses. Which of the following are site design considerations that provide a physical and psychological deterrence to intruders?
Question 54
Question
Which of the following are supplemental guidance for implementing specific components of the physical security program to cover events such as major accidents, fire, and bomb threats?
Question 55
Question
The _________________________ provides oversight in mission assurance efforts on issues that cut across all DoD protection programs and functions as an Office of Secretary of Defense (OSD) and Joint Staff-level management and decision support forum.
Answer
-
Threat Working Group
-
Antiterrorism Working Group
-
Antiterrorism Executive Committee
-
Mission Assurance Senior Steering Group
Question 56
Question
Which of the following is conducted by members of your own organization and usually with the aid of a checklist?
Question 57
Question
In order to plan and implement effective physical security measures, you must use the __________________ to determine where and how to allocate your security resources.
Answer
-
risk management process
-
operation assessment process
-
threat assessment process
-
vulnerability assessment process
Question 58
Question
Select ALL the correct responses. Which of the following protective measures can make doors more attack-resistant?
Answer
-
Install solid steel doors
-
Limit the number of entrances and exits to what is necessary
-
Mount cameras on the roof
Question 59
Question
What is the first line of defense in any physical security system?
Answer
-
Site lighting
-
Barriers and fencing
-
Sensors
Question 60
Question
The Threat Working Group is responsible for identifying foreign, domestic, and local threats and informing the installation commanding officer of current threat trends in the area of responsibility.
Question 61
Question
Which of the following is defined as defensive measures used to reduce the vulnerability of individuals and property to terrorist attacks, to include limited response and containment?
Answer
-
Antiterrorism
-
Physical Security Plan
-
Force Protection
-
Threat Level Indicators
Question 62
Question
Which threat level signifies anti-U.S. terrorists are operationally active and use large casualty-producing attacks as their preferred method of operation?
Answer
-
High
-
Moderate
-
Significant
-
Low
Question 63
Question
Select ALL the correct responses. Which of the following represent the purpose of physical security?
Answer
-
Deter intruders
-
Prevent theft, damage, or unauthorized access to assets
-
Manpower
-
Safeguard against threats
Question 64
Question
Who is responsible for providing information on the capabilities, intentions, and threats of adversaries associated with foreign intelligence entities?
Question 65
Question
The ______________________ is a comprehensive written plan for appropriate and economical use of personnel and equipment to prevent or minimize criminal and disruptive activities.
Answer
-
Physical Security Plan
-
Cybersecurity Plan
-
COMSEC Plan
-
Monthly Action Plan
Question 66
Question
Which of the following is conducted by a senior official to ensure regulatory requirements are being met and include assist visits, command inspections, and Inspector General (IG) inspections?
Question 67
Question
_____________ have reinforced concrete on all walls, ceilings, and floors and hardened steel doors.
Question 68
Question
GSA-approved security containers can be used to store classified information, weapons, and sensitive items.
Question 69
Question
Who is responsible for managing the installation or facility antiterrorism program and using defensive measures to reduce vulnerability of individuals and property from terrorist attacks?
Question 70
Question
Select ALL the correct responses. Which of the following is an exterior intrusion detection system (IDS)?
Question 71
Question
_______________________ is the most common protective lighting system, consisting of a series of fixed lights arranged to flood an area with overlapping cones of light.
Answer
-
Standby lighting
-
Movable lighting
-
Continuous lighting
-
Emergency lighting
Question 72
Question
Security systems such as intrusion detection systems (IDS) and closed circuit television (CCTV) systems are countermeasures.
Question 73
Question
Which type of locks may be appropriate for safeguarding classified information?
Question 74
Question
Select ALL the correct responses. Which of the following comprise the Mission Assurance Senior Steering Group?
Question 75
Question
Which of the following statements best describes an example of point security?
Question 76
Question
Select ALL the correct responses. Which of the following are examples of security-in-depth, layering of physical security countermeasures?
Answer
-
Staff assist visits
-
Inspections
-
Lighting and cameras
-
Fencing and guards
Question 77
Question
Select ALL the correct responses. Which of the following are types of inspections that can ensure compliance with the physical security plan?
Question 78
Question
Select ALL the correct responses. Which of the following are the weakest points in a building?
Question 79
Question
The primary purpose of physical security is ____________ and protection.
Answer
-
attacking intruders
-
security-in-depth
-
prevention