Question 1
Question
The distance between two consecutive corresponding points on a wave is?
Answer
-
Frequency
-
Cycles
-
Wave
-
Wavelength
Question 2
Answer
-
Visible with ultraviolet light
-
Visible while in the dark room
-
Only visible when it is being shot
-
They are like JOHN CENA and you cant see them
Question 3
Question
The higher that the frequency of x-ray waves are...
Question 4
Question 5
Question
X-ray penetration depends on atomic number, x-ray energy, and density
Question 6
Question
Waves that are longer have___?
Answer
-
Lower frequency
-
Higher frequency
Question 7
Question
The lower the frequency the _____ the penetration power
Question 8
Question 9
Question 10
Question
Which consists of the wire filament and focusing cup?
Question 11
Answer
-
90% heat and 9% X-rays
-
99% heat and 1% X-rays
-
1% heat and 99% X-rays
-
50% heat and 50% X-rays
Question 12
Question
What provides and houses the vacuum environment?
Answer
-
Anode
-
Cathode
-
Glass envelope
-
Focusing cup
-
Wire filament
-
Aluminum filter
Question 13
Question
Produces electrons when heated
Answer
-
Anode
-
Cathode
-
Wire filament
-
Focusing cup
Question 14
Question
What is the wire filament made of and why?
Answer
-
Tungsten; high atomic number and high melting point
-
Molybdenum; low atomic number and high melting point
-
Copper; high atomic number and low melting point necessary for electron production
-
Aluminum; high atomic number, high melting point
Question 15
Answer
-
How many electrons
-
Speed of the electrons
Question 16
Answer
-
Speed of electrons
-
How many electrons
Question 17
Question
The higher that an atomic number is....
Answer
-
The more dense it is
-
The less dense it is
Question 18
Question
If x-ray beams went all the way to the film..
Answer
-
You would see black
-
You would see white
Question 19
Question
If you see white on the finished radiograph, this tells you?
Question 20
Question
What is the wire filament heated by?
Answer
-
Low energy circuit
-
High energy circuit
Question 21
Question
X-rays beams can cause cataracts in humans
Question 22
Question
Objects that fluoresce or emit light after an x-ray has been shot indicates that the x -ray machine wire filament is faulty
Question 23
Question
The focusing cup is made of what material and why?
Question 24
Question
The target of the anode is made of what material and why?
Question 25
Question
What would tell you that heat damage have occurred in a dental anode?
Answer
-
Cathode will not make a cloud of electrons
-
Finished radiograph is too light
-
There will be no radiograph made
-
You will hear a loud machinery noise inside of the anode side
Question 26
Question
The heel effect is more prominent in?
Answer
-
Rotating anodes
-
Stationary anodes
Question 27
Question
What is the heel effect?
Answer
-
causes increased absorption of x-ray photons by target before can reach patient due to decreased intensity at anode side
-
causes increased absorption of x-ray electrons by the cathode
-
Results in crazing which is when glass pieces fall and can "arch" the current
-
Results in decreased absorption of quanta at the target before can reach patient and image receptor due to increased intensity on cathode side
Question 28
Question
The most common focal spot in a veterinary machine is?
Answer
-
2mm squared
-
3mm squared
-
7-8mm squared
-
10mm squared
Question 29
Question
In regards to x-ray, pneumbra is?
Answer
-
1996 band formed in France and wrote the song "Tragical Memories"
-
Lighter than normal x-ray phenomon
-
Larger focal spots that form halo effect on finished radiograph
-
Darker than normal x-ray phenomon
Question 30
Question
During the heel effect, there is?
Answer
-
Decreased intensity at anode side
-
Decrease intensity at cathode side
-
Increased intensity at cathode side
-
Increased intensity at anode side
Question 31
Question
In most situations, larger focal spots produce images with?
Answer
-
Greater detail
-
Reduction of detail
Question 32
Question
The ____ the anode, the more severe that the heel effect becomes
Answer
-
faster
-
slower
-
larger
-
steeper
Question 33
Question
Which would have the larger focal spot to dissipate heat?
Answer
-
Rotating anode
-
Stationary anodes
Question 34
Question
Is a tightly focused x-ray beam that exits the tube window
Answer
-
Effective focal spot
-
Focal spot
-
Line focus principle
-
Anode beam
-
Focusing cup
Question 35
Question
Which is larger?
Answer
-
Actual focal spot
-
Effective focal spot
Question 36
Question
In an x-ray, the dog's head is usually towards the?
Question 37
Question
Outer edges of focal spot become so hot that the size of the focal spot is enlarged, a phenomenon referred to as?
Answer
-
Line focus principle
-
Focal spot bloom
-
Effective focal spot
-
Heel effect
Question 38
Question
Net result of focal spot bloom is?
Question 39
Question
Most tube failures happen because of?
Answer
-
Cathode failure
-
Anode failure
-
Filament failure
-
Focusing cup failure
Question 40
Question
The x-ray does not have to cool between x-rays
Question 41
Question
Which is not true of the standby current?
Answer
-
Prolongs life of the tube
-
Produces an electron cloud prior to an actual x-ray (good for inhalation and exhalation)
-
Preheats filament to a low temperature when X-ray machine is turned on
Question 42
Question
You are going to take an x-ray of the abdomen with the use of the preexposure button. You are waiting until?
Question 43
Question
You are going to take an x-ray of the thorax with the use of the preexposure button. You are waiting until?
Question 44
Question
If the film is transparent or light after processing, there is most likely an issue with the?
Answer
-
Anode
-
Cathode
-
Filament
-
Preexposure button
Question 45
Question
Firm blackness that is not uniform could be due to?
Answer
-
Anode target failure
-
Anode bearings failure
-
Glass envelop damage
-
Filament failure
-
Cathode failure
Question 46
Question
Which is most likely to fail with the use of preexposure button over an extended period of time?
Answer
-
Anode bearings
-
Anode target
-
Cathode
-
Glass envelope
-
Filament
Question 47
Question
The mAs meter on the machine is stuck. You suspect?
Question 48
Question
You should use ___ mAs techniques when possible
Question 49
Question
What may cause arcing?
Question 50
Question
Provides the electrical potential to drive the electron cloud in stream from cathode to anode
Answer
-
high voltage circuit
-
Low voltage circuit
Question 51
Question
Provides electricity to heat the filament
Answer
-
High voltage circuit
-
Low voltage circuit
Question 52
Question
Reduces voltage of incoming line to about 10 volts
Answer
-
Autotransformer
-
Step-up transformer
-
Step-down transformer
-
Biotransformer
Question 53
Question
In general, what part of the x-ray dissipates heat for the entire machine?
Answer
-
Oil
-
Glass envelope
-
Anode
-
Focusing cup
-
Filament
Question 54
Question
Controls amount of kVP across the x-ray tube
Answer
-
Autotransformer
-
Step-up transformer
-
Step-down transformer
-
Biotransformer
Question 55
Question
Which circuit is connected to the mA control on the console
Answer
-
Low voltage circuit
-
High voltage circuit
-
Autotransformer
-
Step-up transformer
Question 56
Question
You want to keep exposure times of 1/30 second or longer
Question 57
Question
Which is used for portable units
Answer
-
Half wave rectification
-
Full wave rectification
Question 58
Question
If you want to decrease potential of x-ray exposure to the technician, use a timer switch
Question 59
Question
Which only uses the positive part of the electrical current in regards to half way rectification?
Answer
-
Dental units
-
Stationary units
Question 60
Question
Why are rectifiers used?
Answer
-
When anode gets too hot, electrons can flow back to filament and damage it
-
When cathode gets too hot, electrons can cause damage to the glass envelope
-
"crazing" and "arcing" can both occur
-
X-rays that are constantly used can result in anode bearing damage which results in lighter x-rays
Question 61
Question
What does a colimator do?
Question 62
Question
Scatter radiation is a negative result of an uncontrolled beam that can result in?
Question 63
Question
Coning down prevents?
Answer
-
Damage to the cathode
-
Damage to personnel
-
Damage to the filament
-
Overheating
Question 64
Question
You are working in California and the X-ray machine you are using has an output of 75 kVp. The state law in California says that you are required to have which of the following on your x-ray machine?
Question 65
Question
What is the #1 cause of artifacts on a radiograph?
Question 66
Question
What does the control panel not include?
Question 67
Question
Which is not a factor of X-ray tube rating?
Answer
-
Focal spot size
-
Target angle
-
Anode speed
-
Electrical current
-
Alloy composition
Question 68
Question
What do X-ray tube ratings determine?
Question 69
Question
What adjusts the transformer if needed when electrical output from incoming line is inconsistent?
Answer
-
Rectification
-
Voltage compensator
-
Aluminum filter
-
Colimator
Question 70
Question
A three phase generator is more powerful than a single phase generator because there is an almost always constant current between anode and cathode since it superimposes three single phase currents out of phase with each other
Question 71
Question
The mA cannot be controlled when air molecules interfere with the electron flow following glass envelope damage because there is less x-rays produced at the target area
Question 72
Question
The negatively charged particle of an atom is?
Question 73
Question
A radiograph is synonymous with an x-ray
Question 74
Question
Frequency is measured how?
Answer
-
Cycles of the wave that pass stationary point per second
-
Cycles of the wave that pass stationary point per minute
-
Cycles of the wave that pass stationary point per hour
Question 75
Question
Atoms consist of?
Answer
-
Particles
-
Electrons
-
Neutrons
-
All of the above
Question 76
Question
X-ray machine rays can bend and turn corners as needed which is why safety glasses are required
Question 77
Question
The actual beam from a machine is called?
Question 78
Question
X-rays can excite or ionize atoms which can be a source of tumors and tissue damage if precautions are not taken
Question 79
Question
The guy that discovered x-rays and documented them in 1895 is: [blank_start]Wilhelm Conrad Roentgen[blank_end]
Question 80
Question
Which of the following do we need to produce an x-ray
Answer
-
Source of electrons
-
Way to accelerate electrons from one side of the tube to the other
-
Vacuum environment to remove air molecules and prevent oxidation
-
Target for electrons to collide with and interact with to produce x-rays
-
All of the above
Question 81
Question
A mammography machine is likely to be made of?
Question 82
Question
Why is the base of the anode copper?
Answer
-
Draws heat away from target
-
Used to help make electrons and shoot them forward
-
Prevent scatter radiation as a result of stray electrons on their way from the cathode side
-
All of the above are true
Question 83
Question
Which of the following anodes will rotate on its axis through the center of the tube
Question 84
Question
What is the red arrow pointing to?
Question 85
Question
What is the red arrow pointing to?
Question 86
Question
What is the red arrow?
Answer
-
Oil
-
Glass envelope
-
Window
-
Filter
Question 87
Question
What is the red arrow pointing to?
Question 88
Question
The red arrow is pointing towards?
Question 89
Question
Radiation is emitted from the target area in a ___ shape with the heel effect
Question 90
Question
Which is the most limited in mA and has limited use on large body parts?
Answer
-
Portable anodes
-
Disk shaped anodes
Question 91
Question
How do you get mAs?
Answer
-
mA x time
-
mA x kVp
-
mA x time divided by kVp
Question 92
Question
Waves from high frequency generators are usually?
Question 93
Question
Watery with lots of air require?
Question 94
Question
Which is a normal mA setting?
Question 95
Question
Which is a normal Kvp setting?
Question 96
Question
The primary purpose of the x-ray tube is to stop stray radiation AND prevent damage to internal components
Question 97
Question
Do shorter or longer wave lengths have better penetration?
Question 98
Question
Bundles of energy that are carried by the wave in an x-ray beam are called?
Answer
-
Photons
-
Quanta
-
Neutrons
-
Both Quanta and Photons
Question 99
Question
Specific target angle that produces effective focal spot that will be square and much smaller than the actual focal spot
Answer
-
Heel effect
-
Line focus principle
-
Focal spot zoom
-
Focal spot bloom
Question 100
Question
Which produces more heat?
Question 101
Question
The kilovoltage applied between the anode and cathode will later translate into penetrating power
Question 102
Question
If anode bearings fail completely in a machine, you will hear a loud noise almost like a machinery noise from the anode side when attempting to use the exposure or pre-exposure button
Question 103
Question
Aluminum filters help to?
Answer
-
Remove low energy photons
-
Remove high energy photons
-
Remove high energy electrons
-
Remove low energy electrons
Question 104
Question
If the warning light turns on during the x-ray exposure, this indicates an issue with the machine and requires immediate technical support
Question 105
Question
Which has more filaments
Answer
-
Portable machines
-
Floor models
Question 106
Question
The heel effect is the result of?
Answer
-
X-ray emission that is nearly parallel to the target itself
-
X-ray emission that is nowhere near the target but is actually arced away
-
X-ray emission that is nearly perpendicular to the target itself
Question 107
Question
What kind of anode would you choose to decrease the heel effect?
Answer
-
25 degrees angled anode
-
15 degrees angled anode
-
18 degrees angled anode
Question 108
Question
To withstand heat from electron bombardment, focal spot has to be larger than what is perfect for great detail so you find a medium between detail and size
Question 109
Question
IS the rotating anode, the filament is angled to direct electrons toward the beveled target area of the rotating disk to distribute heat
Question 110
Question
In stationary anodes, the face of the target is angled toward the window and cannot withstand high heats
Question 111
Question
Which will better absorb photons
Question 112
Question
Rotating anodes can have smaller focal spots than stationary anodes
Question 113
Question
Anode bearing failure is most often seen in?
Answer
-
Rotating anodes
-
Stationary anodes
Question 114
Question
The majority of tube failure is user error
Question 115
Question
Rectifiers are placed in series in high voltage part of circuit to prevent conduction during negative phase
Question 116
Question
High-frequency generators often have hills and valleys
Question 117
Question
Full wave rectification current pulses 120 times/second and is twice the x-ray production and decreased exposure times
Question 118
Question
Which does not use tungsten?
Answer
-
Wire filament
-
Focusing cup
-
Anode
-
Target
Question 119
Question
The spindle which dissipates heat for the rotating anode is made up?
Question 120
Question
Which is a poor conductor of heat?
Question 121
Question
Which is better at dissipating heat?
Question 122
Question
If the anode bearings are just starting to go bad, you will hear a machinery like noise and target will overheat