6155780
Description
Quiz by Alexander Gomez, updated more than 1 year ago
|
Created by Alexander Gomez
about 8 years ago
|
|
Question 1
Question
You have been asked to install and configure a new switch in a customer network. Use the
console access to the existing and new switches to configure and verify correct device
configuration.
You are connecting the New_Switch to the LAN topology; the switch has been partially configured
and you need to complete the rest of configuration to enable PC1 communication with PC2. Which
of the configuration is correct?
Answer
Question 2
Question
You have been asked to install and configure a new switch in a customer network. Use the
console access to the existing and new switches to configure and verify correct device
configuration.
Refer to the configuration. For which configured VLAN are untagged frames sent over trunk
between SW1 and SW2?
Answer
-
VLAN1
-
VLAN 99
-
VLAN 999
-
VLAN 40
-
VLAN 50
-
VLAN 200
-
VLAN 300
Question 3
Question
You have been asked to install and configure a new switch in a customer network. Use the
console access to the existing and new switches to configure and verify correct device
configuration.You are adding new VLANs. VLAN500 and VLAN600 to the topology in such way that you need to
configure SW1 as primary root for VLAN 500 and secondary for VLAN 600 and SW2 as primary
root for VLAN 600 and secondary for VLAN 500. Which configuration step is valid?
Answer
-
Configure VLAN 500 & VLAN 600 on both SW1 & SW2
-
Configure VLAN 500 and VLAN 600 on SW1 only
-
Configure VLAN 500 and VLAN 600 on SW2 only
-
Configure VLAN 500 and VLAN 600 on SW1 ,SW2 and SW4
-
On SW2; configure vtp mode as off and configure VLAN 500 and VLAN 600; configure back to vtp server mode.
Question 4
Question
You have been asked to install and configure a new switch in a customer network. Use the
console access to the existing and new switches to configure and verify correct device
configuration.Examine the VTP configuration. You are required to configure private VLANs for a new server
deployment connecting to the SW4 switch. Which of the following configuration steps will allow
creating private VLANs?
Answer
-
Disable VTP pruning on SW1 only
-
Disable VTP pruning on SW2 only
-
Disable VTP pruning on SW4 only
-
Disable VTP pruning on SW2, SW4 and New_Switch
-
Disable VTP pruning on New_Switch and SW4 only.
Want to create your own Quizzes for free with GoConqr? Learn more.