Pregunta 1
Pregunta
This sprinkler is used as a way to:
Respuesta
-
Irrigate trees
-
Irrigate turf
-
Irrigate shrubs
Pregunta 2
Pregunta
When sprinklers are set to water each-other and sometimes overlap each other is called:
Respuesta
-
Head to head coverage
-
Poor uniformity
-
Wasted water
-
Good sprinkler spacing
Pregunta 3
Pregunta
To connect two or more wires, a ______ _______ is needed
Respuesta
-
Wire striper
-
Wire nut
-
Wire splicer
-
Chime connector
Pregunta 4
Pregunta
To glue pvc together you must use:
Respuesta
-
Super glue and primer
-
Primer and pvc cement
-
A slip fix
-
Good strength
Pregunta 5
Pregunta
A poly spaghetti line is also known as 1/4” polyethylene tubing?
Pregunta 6
Pregunta
A sprinkler that has no rotating parts is called a
Respuesta
-
Rotor head
-
Impact Head
-
Spray head
-
R-Van
Pregunta 7
Pregunta
What does GPM stand for?
Pregunta 8
Pregunta
What do you need to do if you see a dry spot in the turf. (Check all that apply)
Respuesta
-
Check the station on the controller and make sure is working there.
-
Check the zone valve to see if all components are working properly and water is flowing.
-
Check sprinkler to see if it’s balanced and working properly.
-
Probe soil to check for soil moisture.
-
Call your supervisor so he can make the assesment.
Pregunta 9
Pregunta
What is the most common emitter used for shrubs?
Respuesta
-
1-GPH
-
1-GPM
-
In-line
-
Spray head
Pregunta 10
Pregunta
This is a brass ball valve.
Pregunta 11
Pregunta
Purple PVC means
Respuesta
-
Potable water
-
Drinkable water
-
Sewer water
-
Non-potable water
Pregunta 12
Pregunta
Irrigators are required to wear proper PPE when performing their job duties. This includes:
Safety glasses,
Vest,
Gloves
Pregunta 13
Pregunta
The irrigation tech can take their gloves off when performing the following activities:
Pipe fitting
Valve or head replacement
Wiring
Pregunta 14
Pregunta
A black irrigation lateral line, that is commonly used to water shrubs, is known as:
Respuesta
-
PVC-pipe
-
CPVC-pipe
-
Poly-line
-
SCH-40-line
Pregunta 15
Pregunta
These parts are commonly known as
Respuesta
-
Poly fittings
-
PVC fittings
-
CPVC fittings
-
SCH-80 fittings
Pregunta 16
Pregunta
These parts are commonly known as
Respuesta
-
PVC fittings
-
Poly fittings
-
CPVC fittings
-
SCH-80 fittings
Pregunta 17
Pregunta
If the bakcflow preventer is off, how will the irrigated area be affected?
Respuesta
-
The area will get half the water
-
The area will only water at night
-
The whole area will be without water
-
The whole area will flood
Pregunta 18
Pregunta
These parts are commonly know as:
Respuesta
-
MP Rotator
-
RVAN
-
Spray nozzel
-
I-20
Pregunta 19
Pregunta
It is not necessary to take pictures when doing irrigation repairs.
Pregunta 20
Pregunta
When working on irrigation repairs, when do pictures need to be taken?
Pregunta 21
Pregunta
This connection is known as a
Respuesta
-
Wire splice
-
Wire nut
-
Wire splicer
-
Irrigation wire
Pregunta 22
Pregunta
Correctly name the labeled parts.
Respuesta
-
Flow control
-
Bleeder Screw
-
Diaphragm
-
Solenoid
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Bleeder screw
-
Flow control
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Bleeder Screw
-
Flow control
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
-
Flow control
-
Bleeder screw
-
Solenoid
-
Diaphragm
-
Bonnet
-
Body
Pregunta 23
Pregunta
Fill in work order as if you worked at Verrado #348 in Buckeye on the corner of Main St. & Court St., worked on a regular water leak with pipe break, had the parts with you and completed the work in 1 hour.
your picture number is: 12-12-19
Respuesta
-
348
-
12-12-19
-
Verrado
-
Buckeye
-
12-12-19
-
960
-
60
-
960
-
60
-
12-12-19
-
0
-
1
-
0
-
1
-
WL
-
SC
-
SV
-
HM
-
1
-
2
-
8
-
Buckeye
-
Verrado
-
Main St. & Court St.
-
Yes
-
No
-
Yes
-
No
-
12-12-19
-
960
-
60
-
Verrado
-
Buckeye
-
"Your Name"
-
960
-
Inventory
-
Store
Pregunta 24
Pregunta
When and why are Pre-Task Plans required?
Check all that apply.
Respuesta
-
They must be done daily.
-
To identify possible job-site hazards.
-
Should be done before starting to work.
-
Only required if there are visible hazards.
-
Only required if the supervisor requests them.
Pregunta 25
Pregunta
When trenching, the work area should be secured by?
Choose all that apply.
Respuesta
-
Adding yellow caution tape.
-
Add cones around the area.
-
Call the people around the area to let them know
-
There's no need to secure an open trench.
Pregunta 26
Pregunta
The image size app is needed to take pictures for any work order:
Respuesta
-
to prevent going over the data allowance.
-
to keep the supervisor happy.
-
to take more pictures per day.
Pregunta 27
Pregunta
The purpose of an irrigation system is to supplement rain water?
Pregunta 28
Pregunta
What is the MAIN purpose of a Backflow preventer?
Respuesta
-
To shut off all the water.
-
To prevent drinking water from being contaminated.
-
To get the water from the city.
-
To connect a master valve.
Pregunta 29
Pregunta
Sunlight can damage exposed PVC pipes and fittings?
Pregunta 30
Pregunta
What are common problems that can cause the irrigation system to fail?
choose all that apply.
Respuesta
-
High pressure.
-
Tree roots.
-
Mowers.
-
Vandalism.
-
Construction work.
Pregunta 31
Pregunta
A wire toner can be used to test a solenoid?
Pregunta 32
Pregunta
There are 5 main steps that must be completed to correctly program a controller. what are they?
Choose all that apply.
Respuesta
-
Set the current date and time.
-
Set the start time.
-
Set the programs.
-
Set the days to run the program.
-
Set the station run times
-
Set the rain delay.
-
Set the seasonal adjustment.
Pregunta 33
Pregunta
Some controllers will allow you to manually run a complete program.
Pregunta 34
Pregunta
If a controller is not programmed correctly what could happen?
Choose all that apply.
Respuesta
-
It can cause flooding.
-
High water bills.
-
It can result in more system failures.
-
It can cause all the plant material to die.
-
It can flood turf areas or cause dry spots in turf.
Pregunta 35
Pregunta
What is the main purpose of an isolation valve?
Pregunta 36
Pregunta
It is always a good idea to pay attention to the irrigation boxes before opening them to see if anything is living in them?
Pregunta 37
Pregunta
If a valve is not turning on with the controller and all of the point of connections are on, all the other valves are working properly and you're in front of the no working valve. what should be the first thing to check?
Respuesta
-
Check the diaphragm.
-
Check the solenoid.
-
Check the water input.
Pregunta 38
Pregunta
What could be the reasons why a diaphragm is not working and the water keeps seeping?
check all that apply.
Pregunta 39
Pregunta
AC & DC solenoids can be used in the same system.
Pregunta 40
Pregunta
Correctly name the following parts:
Respuesta
-
Wye strainer
-
Pressure regulator
-
PVC coupling
-
Solenoid
-
Wye strainer
-
Pressure regulator
-
Solenoid
-
PVC coupling
Pregunta 41
Pregunta
Correctly name the following parts:
Respuesta
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
-
Sprinkler
-
PVC Tee
-
Swing joint
-
Decoder
-
Filter
Pregunta 42
Pregunta
Correctly name the following parts:
Respuesta
-
Zone valve
-
Water meter
-
Backflow preventer
-
Wire toner
-
Zone valve
-
Water meter
-
Wire toner
-
Backflow preventer
Pregunta 43
Pregunta
While doing ohms testing on a solenoid, 20-60 ohms will mean everything is good.
Pregunta 44
Pregunta
Why is balancing an irrigation system important?
Pregunta 45
Pregunta
The purpose of an irrigator is to make repairs and leave the area as if no one was there.
Pregunta 46
Pregunta
When making PVC repairs is very important to:
Check all that apply.
Respuesta
-
Make straight cuts
-
Give the pipe a quarter turn right after gluing.
-
Wait 15-30 seconds after the quarter turn before letting the recently glued pipe go.
-
Let the repair cure for up to 12 hours before turning the water on.
-
Turn on the water immediately to check for leaks.
Pregunta 47
Pregunta
What is a Slip-fix?
Pregunta 48
Pregunta
Why is probing the soil so important?
Check all that apply.
Respuesta
-
To control the soil moisture and determine if adjustments in the irrigation system are needed.
-
To make sure the roots are getting water.
-
To make holes on the ground and help the roots.
-
Probing the soil is not really important.
Pregunta 49
Pregunta
It's always a good idea to run the system and walk the area to make sure everything is working properly.
Pregunta 50
Pregunta
Name the following parts correctly:
Respuesta
-
Multi-port emitters
-
Multiplying emitters
-
MP Rotors
-
Spaghetti connections
-
Multi-Port emitters
-
Single use emitters
-
Single emitter
-
Tree emitters
Pregunta 51
Pregunta
What does GPH stand for in irrigation?
Respuesta
-
Gallons Per Hour
-
Game Pack Holder
-
Grams Per Hour
-
Good Payment History