Day 3 Quiz

Descripción

Final / Review ICND 1 Test sobre Day 3 Quiz, creado por Brian Gamble el 25/02/2016.
Brian Gamble
Test por Brian Gamble, actualizado hace más de 1 año
Brian Gamble
Creado por Brian Gamble hace más de 8 años
29
0

Resumen del Recurso

Pregunta 1

Pregunta
Bridges segregate LANs into broadcast domains.
Respuesta
  • True
  • False

Pregunta 2

Pregunta
Choose the correct sequence for the TCP 3 way hand shake
Respuesta
  • SYN, SYN/ACK, ACK
  • ACK , SYN/ACK SYN
  • SYN/ACK, ACK, SYN
  • SYN/ACK, SYN, ACK

Pregunta 3

Pregunta
Switches make forwarding decisions based on the
Respuesta
  • destination mac address
  • source mac address
  • ip address
  • default gateway

Pregunta 4

Pregunta
All of the following are fields in a TCP header except ________.
Respuesta
  • FCS
  • offset
  • destination
  • window

Pregunta 5

Pregunta
If a switch receives a frame with an unknown destination address, the frame is _________.
Respuesta
  • flooded
  • broadcast
  • multicast
  • unicast

Pregunta 6

Pregunta
________, __________, and ____________ are needed to construct a socket.
Respuesta
  • an IP address
  • a transport protocol
  • a port number
  • ethertype

Pregunta 7

Pregunta
A switch populates its MAC address table with addresses from the destination field of received Ethernet frames.
Respuesta
  • True
  • False

Pregunta 8

Pregunta
Choose the correct description for the function below. Multiplexing using ports
Respuesta
  • Function that allows receiving hosts to choose the correct application for which the data is destined, based on the port number.
  • Process of numbering and acknowledging data with Sequence and Acknowledgment header fields.
  • Process that uses window sizes to protect buffer space and routing devices from being overloaded with traffic.
  • Process used to initialize port numbers and Sequence and Acknowledgment fields
  • Continuous stream of bytes from an upper-layer process that is “segmented” for transmission and delivered to upper-layer processes at the receiving device, with the bytes in the same order.

Pregunta 9

Pregunta
In order to make accurate forwarding decision, a switch needs __________
Respuesta
  • a populated MAC address table
  • a management IP address
  • a default gateway
  • a default VLAN

Pregunta 10

Pregunta
Choose the correct description for the function below. Error recovery (reliability)
Respuesta
  • Function that allows receiving hosts to choose the correct application for which the data is destined, based on the port number.
  • Process of numbering and acknowledging data with Sequence and Acknowledgment header fields.
  • Process that uses window sizes to protect buffer space and routing devices from being overloaded with traffic.
  • Process used to initialize port numbers and Sequence and Acknowledgment fields
  • Continuous stream of bytes from an upper-layer process that is “segmented” for transmission and delivered to upper-layer processes at the receiving device, with the bytes in the same order.

Pregunta 11

Pregunta
With an empty MAC address table, a switch acts like a _______.
Respuesta
  • hub
  • bridge
  • router
  • switch

Pregunta 12

Pregunta
Choose the correct description for the function below. Flow control using windowing
Respuesta
  • Function that allows receiving hosts to choose the correct application for which the data is destined, based on the port number.
  • Process of numbering and acknowledging data with Sequence and Acknowledgment header fields.
  • Process that uses window sizes to protect buffer space and routing devices from being overloaded with traffic.
  • Process used to initialize port numbers and Sequence and Acknowledgment fields
  • Continuous stream of bytes from an upper-layer process that is “segmented” for transmission and delivered to upper-layer processes at the receiving device, with the bytes in the same order.

Pregunta 13

Pregunta
Without _____, flooded frames would loop indefinitely.
Respuesta
  • STP
  • 802.1Q
  • CSMA/CD
  • FCS

Pregunta 14

Pregunta
Choose the correct description for the function below. Ordered data transfer and data segmentation
Respuesta
  • Function that allows receiving hosts to choose the correct application for which the data is destined, based on the port number.
  • Process of numbering and acknowledging data with Sequence and Acknowledgment header fields.
  • Process that uses window sizes to protect buffer space and routing devices from being overloaded with traffic.
  • Process used to initialize port numbers and Sequence and Acknowledgment fields
  • Continuous stream of bytes from an upper-layer process that is “segmented” for transmission and delivered to upper-layer processes at the receiving device, with the bytes in the same order.

Pregunta 15

Pregunta
With store and forward processing the entire ________ must be received before it is processed by the switch.
Respuesta
  • frame
  • packet
  • segment
  • bit stream

Pregunta 16

Pregunta
With store and forward processing the entire ________ must be received before it is processed by the switch.
Respuesta
  • TCP segment
  • UDP segment
  • TCP Packet
  • UDP packet

Pregunta 17

Pregunta
Fragment free processing waits to receive the first ___ bytes of a frame before it makes it's forwarding decision
Respuesta
  • 64
  • 48
  • 32
  • 128

Pregunta 18

Pregunta
Port numbers are a vital part of the socket concept.
Respuesta
  • True
  • False

Pregunta 19

Pregunta
Fragment free processing is the most desirable decision logic because it allows for error free transmission along with minimal latency.
Respuesta
  • True
  • False

Pregunta 20

Pregunta
Fragment free processing is the most desirable decision logic because it allows for error free transmission along with minimal latency.
Respuesta
  • True
  • False

Pregunta 21

Pregunta
When creating a modern LAN, you use _______ and __________
Respuesta
  • Switches
  • Routers
  • bridges
  • hubs

Pregunta 22

Pregunta
A protocol that requires an exchange of messages before data transfer begins, or that has a required preestablished correlation between two endpoints.
Respuesta
  • Connection-oriented protocol
  • Connectionless protocol

Pregunta 23

Pregunta
________ and ________ segregate LANs into collision domains.
Respuesta
  • switches
  • routers
  • hubs
  • bridges

Pregunta 24

Pregunta
A protocol that does not require an exchange of messages and that does not require a preestablished correlation between two endpoints.
Respuesta
  • Connection-oriented protocol
  • Connectionless protocol

Pregunta 25

Pregunta
An Ethernet collision domain is comprised of the set of devices that receive a frame when broadcast by another device.
Respuesta
  • True
  • False

Pregunta 26

Pregunta
The UDP header is the same length as the TCP header
Respuesta
  • True
  • False

Pregunta 27

Pregunta
VoIP requires low delay, but can tolerate more jitter than web browsing
Respuesta
  • True
  • False

Pregunta 28

Pregunta
___________ defines the quality of the data transfer between two applications and in the network as a whole.
Respuesta
  • QoS
  • bandwidth
  • delay
  • jitter
  • loss

Pregunta 29

Pregunta
When a host receives a ________ frame, it must process the received frame.
Respuesta
  • broadcast
  • unicast
  • multicast
  • experimental

Pregunta 30

Pregunta
A LAN consists of all devices in the same _________.
Respuesta
  • broadcast-domain
  • collision-domain
  • sub-domain
  • active directory
Mostrar resumen completo Ocultar resumen completo

Similar

DIKTA ICND1 Ch 7
Brian Gamble
DIKTA ICND1 Ch 5
Brian Gamble
DIKTA ICND1 Ch 4
Brian Gamble
DIKTA ICND 1 Ch 3
Brian Gamble
DIKTA ICND 1 Ch 10
Brian Gamble
CCNA Part 1
Axiom42
DIKTA ICND 1 Ch 8
Brian Gamble
DIKTA ICND 1 Ch 9
Brian Gamble
DIKTA ICND 1 Ch 13
Brian Gamble
CCNA Part 2
Axiom42
DIKTA ICND1 Ch 1
Brian Gamble