Excessive oil consumption on a diesel engine could be the result of:
1. high oil temperature
2. oil diluted with fuel
3. low oil pressure
4. cracked bearings
Respuesta
1,2
1,2,3
2,3
3,4
1,2,3,4
Pregunta 3
Pregunta
High oil temperatures in a diesel engine may be caused by:
1. low cooling water temp
2. improper combustion
3. contaminated oil
4. overheated bearings
Respuesta
1,2
1,2,3
2,3
3,4
1,2,3,4
Pregunta 4
Pregunta
How many pumps are required in the distributer system for the injection of fuel into a large industrial diesel engine?
Respuesta
one
two
three
one pump for each cylinder
none of the above
Pregunta 5
Pregunta
Where is the oil filter located in a large diesel engine lubricating oil system?
Respuesta
in the crankcase
on the discharge side of the oil cooler
between the oil pump and the cooler
oil pump suction line
cylinder discharge
Pregunta 6
Pregunta
Which systems may be used for injecting fuel into a diesel engine cylinder?
Respuesta
direct and indirect
solid injection system and carburetion
air injection and turbo injection
solid injection system and air injection system
common system and distributor system
Pregunta 7
Pregunta
A fuel injector
Respuesta
has a fuel injection nozzle
injects fuel and air into the cylinder
inject fuel into the cylinder during the intake stroke
heats the fuel in order to ensure complete combustion
injects fuel vapor into the cylinder
Pregunta 8
Pregunta
A carburetor is used to:
1. atomize the fuel
2. heat the fuel
3. produce a vacuum
4. control the fuel/air mixture
5. add carbon to the fuel
6. mix the fuel and air
Respuesta
1,3,5
2,4,6
1,2,3,4
1,3,4,5
1,3,4,6
Pregunta 9
Pregunta
The _______ ignition system produces a hotter spark at high speeds:
Respuesta
magnetic
coil
distributor
magneto
dynamo
Pregunta 10
Pregunta
The coils function in a battery ignition system is to
Respuesta
increase the current to the plugs
increase the voltage to the plugs
increase both the current an voltage to the plugs
increase the spark across the plugs
create a constant voltage to supply the plugs
Pregunta 11
Pregunta
The camshaft in a large internal combustion engine may be driven by
1. chain
2. gear
3. belt
4. fluid coupling
5. magnetic clutch
6. conduit
Respuesta
1,2,3
4,5,6
1,3,6
2,4,6
1,2,4
Pregunta 12
Pregunta
An oil priming pump on an internal combustion engine is used:
Respuesta
upon shutdown
before start-up
during operation
to fill the crank case
to filter the oil
Pregunta 13
Pregunta
Internal combustion engines that incorporate a heat exchanger cooling system are considered
Respuesta
an indirect cooling system
an open circuit cooling system
a closed circuit cooling system
a reverse flow cooling system
none of the above
Pregunta 14
Pregunta
Overheating an internal combustion engine is caused by:
Respuesta
using the wrong oil
running at low speeds
early fuel injection
oil leaks
none of the above
Pregunta 15
Pregunta
When cooling is inadequate on an internal combustion engine