4.8 Compressor Theory and Designs

Descripción

power engineering 3b2 Test sobre 4.8 Compressor Theory and Designs, creado por TRAVIS CANNING el 29/02/2016.
TRAVIS CANNING
Test por TRAVIS CANNING, actualizado hace más de 1 año
TRAVIS CANNING
Creado por TRAVIS CANNING hace más de 8 años
16
1

Resumen del Recurso

Pregunta 1

Pregunta
Compressor lubrication may be divided into two main sections _______ lubrication and ________ lubrication 1. Peripheral 2. Internal 3. Splash 4. External 5. Pressure
Respuesta
  • 1,2
  • 3,5
  • 2,3,4
  • 2,4

Pregunta 2

Pregunta
A double acting reciprocating compressor:
Respuesta
  • Receives and compresses air at the head end of the cylinder
  • Receives and discharges air at both ends of the cylinder
  • Increases the pressure twice from the inlet valve
  • Has one compression stroke for every crankshaft revolution
  • Must have at least two pistons

Pregunta 3

Pregunta
Two pre-filters are installed on a package industrial screw compressor. They are installed at the inlet of the:
Respuesta
  • Water/oil seperator
  • Air dryer
  • After filter
  • Air fluid seperator
  • Moisture seperator

Pregunta 4

Pregunta
Reciprocating Compressor valves are usually automatic and open and close by:
Respuesta
  • Action of a poppet valve
  • Movement of the piston covering or uncovering ports
  • Operation of an air solenoid valve
  • A pressure difference
  • A camshaft

Pregunta 5

Pregunta
The axial flow compressor's basic operating principle is similar to a:
Respuesta
  • Centrifugal compressor
  • Reciprocating compressor
  • Reaction turbine in reverse
  • Reaction turbine
  • Rotary compressor

Pregunta 6

Pregunta
The compression Ratio is the ratio of:
Respuesta
  • Absolute discharge pressure to absolute inlet pressure
  • Gauge discharge pressure to gauge inlet pressure
  • The free air intake to the absolute volumetric discharge
  • The gauge inlet pressure to the absolute discharge pressure
  • Piston diameter to piston stroke

Pregunta 7

Pregunta
In a packaged screw compressor package, the bulk of the moisture is removed in the moisture separator in order to decrease the load in the:
Respuesta
  • Air/fluid seperator
  • Pre-filter
  • Air dryer
  • After filter
  • Water/Oil seperator

Pregunta 8

Pregunta
The prime purpose of water-cooling or air cooling an air compressors cylinder is to:
Respuesta
  • Cool the air
  • Reduce moisture and volume of the air
  • Keep the cylinder at a reasonable temperature
  • Prevent fire from occurring in the receiver
  • Prevent operator injury

Pregunta 9

Pregunta
An important advantage of a sliding vane compressor is that it:
Respuesta
  • Does not require internal lubrication
  • Has a high starting torque
  • Does not require inlet or discharge valves
  • Requires light nylon timing gears
  • Does not require a prime mover

Pregunta 10

Pregunta
An air filter on an air compressor inlet pipe is used to:
Respuesta
  • Reduce the air velocity
  • Keep out the moisture
  • Purify the air by removing exhaust process gases
  • Prevent dust and other particulate from entering the compressor
  • Increase the air velocity
Mostrar resumen completo Ocultar resumen completo

Similar

DIAS DE LA SEMANA, MESES Y ESTACIONES EN INGLES
Montse Lafuente Benito
Test Asociado al Reading "extract from a novel"
Diego Santos
Operadores Python
Giovanni Sanhuez
Los 10 Mandamientos de la Ciudadanía Digital
Diego Santos
Técnicas de Expresión Oral
Camilo Ospina
Reported Speech (I) - Estilo indirecto
Diego Santos
MODAL VERBS
Florencia Soledad
Herencia Genética básica
Catalina Ramos
Transporte a través de membrana.
heydi beltran
Sistema óseo
Laura Mon
TRIÁNGULOS y CUADRILÁTEROS
Ulises Yo