4699066
Descripción
Test por TRAVIS CANNING, actualizado hace más de 1 año
|
Creado por TRAVIS CANNING
hace más de 8 años
|
|
Pregunta 1
Pregunta
Suction pressure too low might be due to:
Respuesta
-
System load too high
-
Not enough condenser cooling water
-
Receiver level too high
-
Receiver level too low
-
Faulty or closed expansion valve
Pregunta 2
Pregunta
When changing ammonia systems, frost on the drum bottom indicates:
Respuesta
-
Too much refrigerant
-
The ambient temperature is too high
-
Refrigerant drum is empty or very nearly empty
-
Refrigerant drum is still full
-
Pressure is too high
Pregunta 3
Pregunta
A low-pressure control in a refrigerating system can be used for:
Respuesta
-
Condenser pressure control
-
Starting and stopping the compressor
-
Purging non-condensable gases
-
Keeping the receiver pressure from getting too high
-
Evaporator pressure control
Pregunta 4
Pregunta
In an indirect ammonia system using brine and water-cooled condenser, the discharge pressure is controlled by:
Respuesta
-
The load on the brine
-
Regulating the expansion valve
-
Regulating the cooling water to the condenser
-
Using a pressure release valve
-
The amount of ammonia refrigerant used
Pregunta 5
Pregunta
Where public occupancy is a concern when using Safety Group 2 refrigerants the safest systems are:
Respuesta
-
Direct refrigeration
-
Indirect systems
-
Any available system
-
Automatic refrigeration
-
The C/S/A approved refrigeration systems
Pregunta 6
Pregunta
The most efficient method of condenser cooling is
Respuesta
-
Air cooled
-
Water cooled
-
Latent heat cooled
-
Diffusion cooled
-
Cooled by another refrigeration unit
Pregunta 7
Pregunta
Before changing a new refrigeration installation:
Respuesta
-
It should be filled with water first
-
The entire refrigerant containing system must be thoroughly tested for performance
-
It should be filled with refrigerant and tested for performance
-
The entire refrigerant containing system must be completely filled with water and hydrostatically tested
-
It should be filled with hydrogen and tested
Pregunta 8
Pregunta
In a indirect ammonia vapour compression system using brine, the suction pressure is controlled by:
Respuesta
-
The load on the brine
-
The flow of the cooling water to the suction side of the compressor
-
Throttling the metering valve
-
An equalization valve
-
The flow of the condensing water to the condenser
Pregunta 9
Pregunta
Refrigeration application uses could include:
Respuesta
-
Heating methods in industry
-
Gas distillation process
-
Refrigerant oil purification
-
Air conditioning humidifying
-
Air conditioning or gas dehydration
Pregunta 10
Pregunta
The capillary tube has a
Respuesta
-
Very small diameter
-
Medium sized diameter
-
Large diameter
-
Convergent-divergent cross-section
-
Concaved cross sectional area
¿Quieres crear tus propios Tests gratis con GoConqr? Más información.