Creado por Andrew Adams
hace casi 4 años
|
||
Pregunta | Respuesta |
Water Service Materials | Copper Galvanized Steel Lead PVC CPVC Polyethylene Polybutylene Cast Iron Asbestos Cement Brass |
Water Supply Materials | Galvanized Steel Copper PB PE CPVC Brass Stainless Steel |
TP&V tube location in cold climate | 6-12 inches above floor, beside the water heater |
TP&V discharge in warm climate | 6-24 inches above grade level outside the home |
Typical problems with a fan-assisted gas water heater | Inoperative blower intake obstructed poor venting arrangement poor wiring |
why is a trap susceptible to freezing | it is the only DWV pipe that always contains water |
Materials used for DWV pipe | Copper ABS PVC Cast iron lead galvanized steel brass clay |
six locations for cross connection in a residence | Faucets below flood rim dishwashers outside hose bibs bidets vegetable sprayer/extendable faucet trap primers |
typical distance between a fixture and the trap | 24 inches |
seven problems found with vents | Missing Incomplete Poor arrangement too small or long Island venting issues termination issues automatic air vents |
8 problems found with faucets | leaks or drips loose stiff or inoperative cross connection noisy damaged/rusted handles hot/cold reversed clogged aerator inoperative shower diverter |
3 faucet related noises | whistle bang chatter |
7 problems with hose bibs | leaks or drips stiff or inoperative no back flow prevention loose frozen/split pipe poor slope mechanical damage |
7 common problems with bathtubs | leaks rust surface defects cross connections not level overflow leaking slow drains loose/unstable |
5 specific areas tile enclosures are prone to damage | faucets soap dishes grab bars windows changes in direction/material |
¿Quieres crear tus propias Fichas gratiscon GoConqr? Más información.