EX200 - 001 - RHEL6

Pregunta 1 de 15

1

Haz click en el botón naranja y escribe tu respuesta.

Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address: 172.24.40.40/24
Gateway: 172.24.40.1
DNS: 172.24.40.1

Explicación

Pregunta 2 de 15

1

Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group.
The user: tom's login shell should be non-interactive.

Selecciona una de las siguientes respuestas posibles:

Answer: # useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
NA

Explicación

Pregunta 3 de 15

1

Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it.
The files created by users from the same group should also be the admin group.

Selecciona una de las siguientes respuestas posibles:

# cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/
NA

Explicación

Pregunta 4 de 15

1

Configure a task: plan to run echo hello command at 14:23 every day.

Selecciona una de las siguientes respuestas posibles:

# which echo
# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)
NA

Explicación

Pregunta 5 de 15

1

Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.

Selecciona una de las siguientes respuestas posibles:

# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions)
Enter
+2G
t
l
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NA

Explicación

Pregunta 6 de 15

1

Create a user named alex, and the user id should be 1234, and the password should be alex111.

Selecciona una de las siguientes respuestas posibles:

# useradd -u 1234 alex
# passwd alex
alex111
alex111
NA

Explicación

Pregunta 7 de 15

1

Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )

Selecciona una de las siguientes respuestas posibles:

# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NA

Explicación

Pregunta 8 de 15

1

Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.

Selecciona una de las siguientes respuestas posibles:

# yum install -y httpd
# chkconfig httpd on
# cd /var/www/html
# wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
NA

Explicación

Pregunta 9 de 15

1

Configure the verification mode of your host account and the password as LDAP. And it can ldapuser40. The password is set as "password". And the certificate login successfully through can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory unless you configure the autofs in the following questions.

Selecciona una de las siguientes respuestas posibles:

# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP)

Explicación

Pregunta 10 de 15

1

Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.

Selecciona una de las siguientes respuestas posibles:

# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40
NA

Explicación

Pregunta 11 de 15

1

Configure the system synchronous as 172.24.40.10.

Selecciona una de las siguientes respuestas posibles:

# system-config-date
Answer: Graphical Interfaces:
System-->Administration-->Date & Time

Explicación

Pregunta 12 de 15

1

Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)

Selecciona una de las siguientes respuestas posibles:

# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)

Explicación

Pregunta 13 de 15

1

Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.

Selecciona una de las siguientes respuestas posibles:

Answer: # pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
http://www.gratisexam.com/# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NA

Explicación

Pregunta 14 de 15

1

The Additional group of the two users: user2, user3 is the admin group Password: redhat

Selecciona una de las siguientes respuestas posibles:

Answer: # useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NA

Explicación

Pregunta 15 de 15

1

Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2 without any permission.

Selecciona una de las siguientes respuestas posibles:

Answer: # cp /etc/fstab /var/tmp/
# chgrp admin /var/tmp/fstab
# setfacl -m u:user1:rwx /var/tmp/fstab
# setfacl -m u:user2:--- /var/tmp/fstab
# ls -l
-rw-rw-r--+ 1 root admin 685 Nov 10 15:29 /var/tmp/fstab
NA

	Creado por Vagner Aragão hace más de 5 años

Teste

EX200 - 001 - RHEL6

EX200 - 001 - RHEL6

Pregunta 1 de 15

Haz click en el botón naranja y escribe tu respuesta.

Configure your Host Name, IP Address, Gateway and DNS. Host name: station.domain40.example.com /etc/sysconfig/network hostname=abc.com hostname abc.com IP Address: 172.24.40.40/24 Gateway: 172.24.40.1 DNS: 172.24.40.1

Explicación

Pregunta 2 de 15

Add 3 users: harry, natasha, tom. The requirements: The Additional group of the two users: harry, Natasha is the admin group. The user: tom's login shell should be non-interactive.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 15

Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it. The files created by users from the same group should also be the admin group.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 15

Configure a task: plan to run echo hello command at 14:23 every day.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 15

Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 15

Create a user named alex, and the user id should be 1234, and the password should be alex111.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 15

Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server. )

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 15

Configure a HTTP server, which can be accessed through http://station.domain40.example.com. Please download the released page from http://ip/dir/example.html.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 15

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 15

Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 15

Configure the system synchronous as 172.24.40.10.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 15

Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 15

Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 14 de 15

The Additional group of the two users: user2, user3 is the admin group Password: redhat

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 15 de 15

Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2 without any permission.

Selecciona una de las siguientes respuestas posibles:

Explicación

Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address: 172.24.40.40/24
Gateway: 172.24.40.1
DNS: 172.24.40.1

Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group.
The user: tom's login shell should be non-interactive.

Create a catalog under /home named admins. Its respective group is requested to be the admin group. The group users could read and write, while other users are not allowed to access it.
The files created by users from the same group should also be the admin group.

Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.