Windows Server 2016 70-740 - Simulado V

Este test está cronometrado.

Tienes 2 horas para completar 50 preguntas de este test.

Iniciar Test

Por favor espera - en proceso…

Pregunta 1 de 50

Question #01

HOTSPOT -
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 connect to the same network.
Server1 and Server2 have virtual switches configured as shown in the following table.

You have nine virtual machines configured as shown in the following table.

All of the virtual machines are configured to have IP addresses from the same network segment. The firewall on each of the virtual machines is configured to allow network connectivity.
To which virtual machines can you connect from VM1 and VM2? To answer, select the appropriate options in the answer area.
Hot Area:

Obs: Não marcar as imagens, só estão pra ajudar na ilustração, e na formulação da questão e da resposta.

Selecciona una o más de las siguientes respuestas posibles:

From VM1: VM4 and VM7
From VM2: VM1 and VM3
From VM1: VM2, VM4, and VM5
From VM2: VM5, VM7, VM8, and VM9
From VM1: none
From VM2: none
From VM1: only VM4
From VM2: only VM5

Explicación

Pregunta 2 de 50

Question #02

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and
Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
Deploy a failover cluster to two new virtual machines.

✑ Store all application databases by using Encrypted File System (EFS).
✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
✑ Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
Which networking mode should you configure for the Windows containers?

Selecciona una de las siguientes respuestas posibles:

12tunnel
12bridge
network address translation (NAT)
transparent

Explicación

Pregunta 3 de 50

Question #03

DRAG DROP -
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and
Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
✑ Deploy a failover cluster to two new virtual machines.
✑ Store all application databases by using Encrypted File System (EFS).
✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
You need to configure the storage solution for the planned failover cluster.
You create two new generations 2 virtual machines on two separate Hyper-V hosts named VM11 and VM12.
Which three actions should you perform in sequence next? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 50

Question #04

DRAG DROP -
On a new server, you install Windows Server 2016, and then you install the Hyper-V server role.
You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Select and Place:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 50

Question #05

HOTSPOT -
You have a server named Server1 that runs Windows Servers 2016. Server1 has a storage array that contains multiple storage enclosures. The storage hardware supports enclosure awareness.
You need to implement Storage Spaces on Server1. Storage Spaces must remain available if two enclosures fail. The solution must minimize the number of enclosures required and must provide the fastest possible write performance.
Which configurations should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecciona una de las siguientes respuestas posibles:

Resiliency type: Dual parity
Number of cnclosures: 3
Resiliency type: Single parity
Number of cnclosures: 4
Resiliency type: Three-way mirror
Number of cnclosures: 5
Resiliency type: two-way mirror
Number of cnclosures: 6
Resiliency type: Three-way mirror
Number of cnclosures: 3
Resiliency type: two-way mirror
Number of cnclosures: 4

Explicación

Pregunta 6 de 50

Question #06

HOTSPOT -
You have a server named Server1 that runs Windows Server 2016.
You mount an image of Windows Server 2016 to C:\Folder1\.
You need to disable support for SMB 1.0 in the image.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 50

Question #07

Your network contains an Active Directory domain named contoso.com. All server run Windows Server 2016.
As a domain administrator, you log on to a server named Server2 and open Windows PowerShell.
You need to establish an interactive PowerShell session to a server named Server1.
Which command should you run?

Selecciona una de las siguientes respuestas posibles:

New-PSSession ""Name Server1
Enter-PSSession ""ComputerName Server1
Enable-PSRemoting Server1
Set-PSSession Configuration ""AccessMode Remote ""Name Server1

Explicación

Pregunta 8 de 50

Question #08

HOTSPOT -
You have a server named Server1 that runs Windows Server 2016.
You create a storage pool named Pool1. Pool1 contains three disks.
You need to create a two-way mirror storage space from the disks in Pool1.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 50

Question #09

You have two servers named Server1 and Server2 that run Windows Server 2016.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The Web Server role is installed on each node.
Users report that when they submit web form data, sometimes the data is not stored, and they must fill in the form again.
You need to resolve the issue. The solution must ensure that connections are load balanced between Server1 and Server2.
What should you do in the NLB cluster?

Selecciona una de las siguientes respuestas posibles:

Modify the existing port rules.
Modify the Cluster operation mode.
Add the Microsoft Load Balancing/Failover Provider service to all of the network adapters.
Add an IP address.

Explicación

Pregunta 10 de 50

Question #10

You have a Windows Server 2106 failover cluster named Cluster1 that contains four nodes named Server1, Server2, Server3, and Server4. Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes.
Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona.
You need to ensure that when you pause a node, the clustered virtual machines will always attempt to move automatically to another node in the same data center before attempting to move to a node in the other data center.
Which two actions should you perform? Each correct answer presents part of the solution.

Selecciona una o más de las siguientes respuestas posibles:

Run the New-ClusterFaultDomain cmdlet.
Run the Add-ClusterGroup cmdlet.
Configure a file share witness for each data center.
Run the Set-ClusterFaultDomain cmdlet.
Create an Active Directory site for each data center.
Change the quorum configuration of the cluster to Node Majority.

Explicación

Pregunta 11 de 50

Question #11

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 has the following settings:
✑ Nested virtualization is enabled.
✑ Dynamic Memory is disabled.
VM1 is currently running.
You need to adjust the amount of memory assigned to VM1 as quickly as possible.
What should you do first?

Selecciona una de las siguientes respuestas posibles:

Change the memory buffer setting of VM1.
Pause VM1.
Shut down VM1.
Enable Dynamic Memory for VM1.

Explicación

Pregunta 12 de 50

Question #12

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and
Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company's IT department:
✑ Deploy a failover cluster to two new virtual machines.
✑ Store all application databases by using Encrypted File System (EFS).
✑ Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
✑ Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
✑ Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
✑ Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
Which two actions should you perform to meet the encryption requirement for WSUS? Each correct answer presents part of the solution.

Selecciona una o más de las siguientes respuestas posibles:

Require SSL on the Inventory virtual directory.
Require SSL on the ClientWebService virtual directory.
Create a firewall rule to allow TCP port 443.
Create a firewall rule to allow TCP port 8531.

Explicación

Pregunta 13 de 50

Question #13

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration.
Solution: You configure the network cards to be on a separate subnet and to have static IP addresses. You configure the cluster to use unicast.
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 14 de 50

Question #14

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image.
Solution: You run the command docker run ""d Microsoft/iis.
You open Disk Management on Server1.
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 15 de 50

Question #15

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image.
Solution: You run the following commands.
docker run ""name container1 ""isolation hyperv ""d Microsoft/iis docker exec ""i container1 cmd.exe dir
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 16 de 50

Question #16

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two servers that run Windows Server 2016.
You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image.
Solution: You run the following commands.
docker run ""name container1 ""d Microsoft/iis
docker exec ""i container1 cmd.exe
dir
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 17 de 50

Question #17

DRAG DROP -
You have a server named Server1 that runs Windows Server 2016.
You open a command prompt on Server1 and run the following commands.

You back up the data on Disk 1.
You plan to convert Disk 1 to a GPT disk, and then to restore the data to Disk 1.
Which four DiskPart commands should you run in sequence before you restore the data? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Select and Place:

Selecciona una de las siguientes respuestas posibles:

select disk 1
Clean
Convert GPT
Create partition primary
select disk 1
Convert GPT
Create partition primary
Format fs=ntfs
Clean
Convert Dynamic
Create partition primary
Format fs=ntfs
Clean
Convert GPT
Create partition primary
Format fs=ntfs

Explicación

Pregunta 18 de 50

Question #18

You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.
Server1 hosts a virtual machine named VM1. Server2 hosts a virtual machine named VM2. Server3 hosts the disks and the configurations of both virtual machines on an SMB share named VMShare. All servers are joined to an Active Directory domain.
You use Server4 to manage Hyper-V operations on Server1 and Server2.
From Server4, you attempt to perform a live migration of VM1 and VM2, but you receive the following error message: "No credentials are available in the security package".
You need to ensure that you can perform the live migration of VM1 and VM2 between Server1 and Server2 while signed in to Server4.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Active Directory Users and Computers, modify the properties of Server4. Configure the delegation settings to trust the computer for delegation of cifs.
From Windows PowerShell on Server3, run the remove-SMBMultiChannelConstraint cmdlet, and then assign Server4 Full Control permissions to VMShare.
From Active Directory Users and Computers, modify the properties of Server1 and Server2. Configure the Delegation settings to trust the computers for delegation of the Microsoft Virtual System Migration Service.
From Active Directory Users and Computers, modify the properties of your user account. Modify the Account is sensitive and cannot be delegated setting.

Explicación

Pregunta 19 de 50

Question #19

You have a server that runs Windows Server 2016 Standard.
You create a new three-way mirror storage space. You format the storage space by using ReFS.
Which two features can you use on the new storage space? Each correct answer presents a complete solution.

Selecciona una o más de las siguientes respuestas posibles:

file and folder permissions
disk quotas
Encrypting File System (EFS)
long file names
Data Deduplication
Shrink volume

Explicación

Pregunta 20 de 50

Question #20

HOTSPOT -
You have a Hyper-V host named Server1 that runs Windows Server 2016 datacenter. Server1 is activated.
On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2016 Standard.
You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 21 de 50

Question #21

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory forest named contoso.com. The forest contains a child domain named eu.contoso.com.
You plan to implement live migration between two Hyper-V hosts that run Windows Server 2016. The hosts are configured as shown in the following table.

You need to ensure that you can perform a live migration of VM1 from Host1 to Host2.
Solution: You replace the processor in Host1 with a processor that is identical to the processor in Host2.
Does meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 22 de 50

Question #22

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 has the Hyper-V server role and Docker installed.
You pull the Microsoft/iis Docker image to Server1.
You need to view the available space in the Microsoft/iis Docker image.
Solution: You run the command docker run ""isolation hyperv -d microsoft/iis.
You open Disk Management on Server1.
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 23 de 50

Question #23

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.
On VM1, Dynamic Memory is disabled, MAC spoofing is enabled for the virtual network adapter, and checkpoints are disabled.
You need to ensure that you can install the Hyper-V server role on VM1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Shut down VM1, enable Dynamic Memory on VM1, and then start VM1.
Shut down VM1, run the Set-VMProcessor cmdlet, and then start VM1.
Disable Hyper-V integration services for VM1, and then restart VM1.
Configure VM1 to use standard checkpoints.

Explicación

Pregunta 24 de 50

Question #24

You have a Nano Server named Nano1.
Nano1 is configured to perform real-time protection scans by using Windows Defender.
You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Run the Add-MpPreference cmdlet and specify the –ExclusionPath
Run the Import-ShieldingDataFile cmdlet and specify the –ShieldingDataFilePath
Run the Protect-ShieldingDataFile cmdlet and specify the –ShieldingDataFilePath
Run the Get-ChildItem cmdlet and specify the –Exclude
From the properties of the D:\App1\Data folder, enable the Hidden attribute.
From the properties of the D:\App1\Data folder, modify the permissions.
From a command prompt, run the attrib command and specify the –s

Explicación

Pregunta 25 de 50

Question #25

You have a server named Server1 that runs Windows Server 2016 and has the File and Storage Services server role installed.
Server1 has an ReFS-formatted volume named Volume1 that is 512 GB. Volume1 is mounted as C:\App1\temp.
You need to ensure that you can enable deduplication of Volume1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Format Volume1
Unmount Volume1.
Install a Windows feature.
Initialize the physical disk that contains Volume1.

Explicación

Pregunta 26 de 50

Question #26

You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table.

You need to ensure that you can use all of the available space on each disk.
What is one of the disks that you must initialize as a GPT disk?

Selecciona una de las siguientes respuestas posibles:

Disk3 on Server3
Disk1 on Server2
Disk2 on Server2
Disk1 on Server3
Disk2 on Server3
Disk1 on Server1
Disk3 on Server2

Explicación

Pregunta 27 de 50

Question #27

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2012 R2. The servers are nodes in a failover cluster named Cluster1.
You perform a rolling upgrade of the cluster nodes to Windows Server 2016.
You need to ensure that you can implement the Virtual Machine Load Balancing feature.
Which cmdlet should you use?

Selecciona una de las siguientes respuestas posibles:

Update-ClusterNetWorkNameResource
Set-ClusterGroupSet
Set-CauClusterRole
Update-ClusterFunctionalLevel

Explicación

Pregunta 28 de 50

Question #28

You have a Windows Server 2016 failover cluster named Cluster1 that contains four nodes named Server1, Server2, Server3, and Server4.
You need to configure Cluster 1 to use directly attached storage to store several virtual machines.
You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1.
What should you do next?

Selecciona una de las siguientes respuestas posibles:

Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes.
Create volumes.
Create a storage pool.
Run the Add-ClusterResource cmdlet on all of the nodes.

Explicación

Pregunta 29 de 50

Question #29

You have a Hyper-V server named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 connects to an external virtual switch named Switch1.
You can ping VM1 from Server1.
You upgrade Server1 to Windows Server 2016.
You need to ensure that you can connect to VM1 by using PowerShell Direct.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Configure the firewall rules on Server1.
Enable the Hyper-V extensible switch extensions on Server1.
Upgrade the configuration version of VM1.
Configure the firewall rules on VM1.

Explicación

Pregunta 30 de 50

Question #30

DRAG DROP -
Your network contains an Active Directory domain named adatum.com. The domain contains four member servers that run Windows Server 2016.
On each server, you locally attach three disks and install the Failover Clustering feature.
You need to create a volume that uses all the disks. The volume must be highly available.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Select and Place:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 31 de 50

Question #31

You have a server named Server1 that runs Windows Server 2016. Windows Defender is enabled on Server1.
Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint
Online. App1 also interacts with several local services.
You need to prevent Windows Defender from scanning any files opened by App1.
What should you do on Server1?

Selecciona una de las siguientes respuestas posibles:

From the Windows Defender settings, configure a file exclusion.
Run the New-CiPolicy cmdlet.
Modify the real-time protection settings in Windows Defender.
From the Windows Defender settings, configure a process exclusion.
Run the Set-ExecutionPolicy cmdlet.
Run the New-AppLockerPolicy cmdlet.

Explicación

Pregunta 32 de 50

Question #32

You have a server named Server1 that runs Windows Server 2016. Server1 has two network adapters that support single root I/O virtualization (SR-IOV). The network adapters are from two different vendors.
You plan to install the Hyper-V server role on Server1, and then to create a virtual machine named VM1 that runs Windows Server 2016. VM1 will use SR-IOV.
You need to ensure that VM1 can use both network adapters for load balancing and failover.
What should you do?

Selecciona una de las siguientes respuestas posibles:

On Server1, create two virtual switches without embedded teaming. On VM1, create one NIC team.
On Server1, create one virtual switch without embedded teaming. On VM1, create one NIC team.
On Server1, create one NIC team. On VM1, create one NIC team.
On Server1, create one virtual switch that has embedded teaming. On VM1, create two NIC teams.

Explicación

Pregunta 33 de 50

Question #33

You have a server named Server1 that runs Windows Server 2016.
Server1 is a Docker host.
You are creating a Dockerfile to build a Docker image.
You need to add a file named File1.txt from Server1 to C:\Folder1\ in the Docker image.
What are two possible commands that you can use to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

Selecciona una o más de las siguientes respuestas posibles:

COPY file1.txt c:/folder1/
copy-item file1.txt folder1\file1.txt
ROBOCOPY file.txt \folder1\
XCOPY file1.txt c:\folder1\
ADD file1.txt /folder1/

Explicación

Pregunta 34 de 50

Question #34

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host1 and Host3.
Does this meet the goal?

Selecciona uno de los siguientes:

VERDADERO
FALSO

Explicación

Pregunta 35 de 50

Question #35

HOTSPOT -
You have a server named VM1. VM1 is a virtual machine on a Hyper-V host that runs Windows Server 2016.
You need to create a checkpoint that includes the virtual machine memory state of VM1.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 36 de 50

Question #36

You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table.

You need to ensure that you can use all of the available space on each disk.
What is one of the disks that you must initialize as a GPT disk?

Selecciona una de las siguientes respuestas posibles:

Disk2 on Server1
Disk1 on Server2
Disk1 on Server1
Disk3 on Server3
Disk2 on Server2
Disk2 on Server3

Explicación

Pregunta 37 de 50

Question #37

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

Selecciona una de las siguientes respuestas posibles:

the dnscmd.exe command
the Enable-WindowsOptionalFeature cmdlet
the dns.exe command
the setup.exe command
the Install-Package cmdlet
the optionalfeatures.exe command

Explicación

Pregunta 38 de 50

Question #38

Your network contains an Active Directory domain named adatum.com. The domain contains a Network Load Balancing (NLB) cluster as shown in the exhibit.
(Click the Exhibit button.)

Which hosts will respond to requests sent to nlb.adatum.com?

Selecciona una de las siguientes respuestas posibles:

Server1 only
Server2 only
Server1 and Server2 only
Server1, Server2, and Server3

Explicación

Pregunta 39 de 50

Question #39

You have a server named Server1 that runs Windows Server 2016.
The server has an application named App1. App1 writes entries to the Application event log when errors are encountered. The events have IDs of either 111 or
112.
You need to restart the service whenever either of these events is logged.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Windows PowerShell, run the Get-SMServerEvent cmdlet and pipe the output to the Start-NetEventSession cmdlet.
From Event Viewer, create a subscription that has a filter for the event IDs.
From Event Viewer, use the Create Basic Task Wizard for each event ID.
From Windows PowerShell, run the Get-Event cmdlet and pipe the output to the cmdlet. Start-NetEventSession parameter.
From Event Viewer, create a custom view that has a filter for the event IDs.
From Performance Monitor, add an Event Trace Session data collector that uses the Microsoft-Windows-Eventlog provider.

Explicación

Pregunta 40 de 50

Question #40

You have a Network Load Balancing (NLB) cluster that contains two nodes named Server1 and Server2. The nodes run Windows Server 2016.
The NLB cluster has the following configuration.

You deploy the Web Server (IIS) server role identically to both servers.
You need to configure NLB to load balance requests between the web servers. HTTP requests must be stateless. HTTPS requests must be stateful.
What should you do? Each correct answer presents part of the solution

Selecciona una o más de las siguientes respuestas posibles:

Modify the Cluster operation mode.
Suspend the cluster.
Drainstop the cluster.
Add a new port rule.
Edit the existing port rule.

Explicación

Pregunta 41 de 50

Question #41

DRAG DROP -
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server
2016. Server1 and Server2 have multiple local disks attached.
You need to create a storage pool by using Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 42 de 50

Question #42

You have a server named Server1 that runs Windows Server 2016. Windows Defender is enabled on Server1.
Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint
Online. App1 also interacts with several local services.
You need to prevent Windows Defender from scanning any files opened by App1.
What should you do on Server1?

Selecciona una de las siguientes respuestas posibles:

Run the Set-ExecutionPolicy cmdlet.
Run the New-AppLockerPolicy cmdlet.
Modify the real-time protection settings in Windows Defender.
Run the Add-MpPreference cmdlet.
Modify the cloud-based protection settings in Windows Defender.
Run the New-CiPolicy cmdlet.

Explicación

Pregunta 43 de 50

Question #43

You have a server named Server1. Server1 contains a drive named D hat has Data Deduplication enabled.
You delete 1 TB of files from drive D.
You need to ensure that you can use all the disk space that was used by the deleted files as soon as possible.
What should you run?

Selecciona una de las siguientes respuestas posibles:

the Update-DedupStatus cmdlet
the ThroughputOptimization task from the Task Scheduler
the WeeklyGarbageCollection task from the Task Scheduler
the Set-DedupVolume cmdlet

Explicación

Pregunta 44 de 50

Question #44

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?

Selecciona una de las siguientes respuestas posibles:

the Add-WindowsPackage cmdlet
the dnscmd.exe command
the optionalfeatures.exe command
the Add-WindowsFeature cmdlet
the dnscmd command
the dns.exe command

Explicación

Pregunta 45 de 50

Question #45

You have a Windows Server 2016 Server Core named Server1.
Server1 is configured to perform real-time protection scans by using Windows Defender.
You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Run the Set-MpPreference cmdlet and specify the –ExclusionPath
Run the Get-ChildItem cmdlet and specify the –Exclude
From the properties of the D:\App1\Data folder, modify the permissions
From a command prompt, run the attrib command and specify the –s
From the properties D:\App1\Data folder, enable the Hidden attribute.
Run the Import-ShieldingDataFile cmdlet and specify the parameter
Run the Protect-ShieldingDataFile cmdlet and specify the parameter.

Explicación

Pregunta 46 de 50

Question #46

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012. VM1 has the following configuration.

You discover that when you back up Server1, VM1 temporarily pauses.
You need to ensure that you can back up Server1 without causing downtime on VM1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Increase the memory on VM1
Connect the hard disk drive of VM1 to an SCSI controller
Update the virtual machine version of VM1
Upgrade VM1 to Windows Server 2016
Enable the VSS integration service on VM1

Explicación

Pregunta 47 de 50

Question #47

You have a server named Server1 that runs Windows Server 2016. The Docker daemon runs on Server1. You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Modify the routing table on Server1
Run the Set-Service Windows PowerShell cmdlet
Edit the configuration.json file
Run the sc config command
Run the Set-NetFirewallPortFilter cmdlet
Run the New-NetFirewallRule cmdlet
Run the sc control command

Explicación

Pregunta 48 de 50

Question #48

You have two servers named Server1 and Server2 that run Windows Server 2016.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.
You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

Selecciona una de las siguientes respuestas posibles:

New-NetQosPolicy
Set-StorageQosPolicy
Set-NetTCPSetting
Set-NetUDPSetting

Explicación

Pregunta 49 de 50

Question #49

You have a server named Server1. Server1 contains a drive named D hat has Data Deduplication enabled.
You delete 1 TB of files from drive D.
You need to ensure that you can use all the disk space that was used by the deleted files as soon as possible.
What should you run?

Selecciona una de las siguientes respuestas posibles:

the BackgroundOptimization task from the Task Scheduler
the WeeklyScrubbing task from the Task Scheduler parameter
the Start-DedupJob cmdlet and the –Type GarbageCollection
the Set-DedupVolume cmdlet parameter
the Start-DedupJob cmdlet and the –Type Optimization

Explicación

Pregunta 50 de 50

Question #50

Your network contains an on-premises Active Directory domain. The domain contains 25 servers that run Windows Server 2016.
You have a hybrid deployment of Microsoft Azure Active Directory (Azure AD).
You plan to manage the servers by using Windows Admin Center.
You install Windows Admin Center on one of the servers.
You need to ensure that connections to Windows Admin Center are authenticated by using multi-factor authentication (MFA).
What should you do first?

Selecciona una de las siguientes respuestas posibles:

Install an extension to Windows Admin Center
Configure Allowed groups
Register the gateway to Azure AD
Import a certificate by using Windows Admin Cent

Explicación

Revisar respuesta

["https://cdn.goconqr.com/uploads/media/image/26136020/desktop_4b5113f4-a782-499b-bbe7-875c0da95ff8.png","https://cdn.goconqr.com/uploads/media/image/26139122/desktop_620a21f7-10d3-4678-b67b-74c6a4f518de.png","https://cdn.goconqr.com/uploads/media/image/26156287/desktop_c90188fe-592c-4898-b760-ef76a28dfef0.png","https://cdn.goconqr.com/uploads/media/image/26157648/desktop_df92dc8c-4185-4c3d-9153-8ebf4a6576b7.png","https://cdn.goconqr.com/uploads/media/image/26158204/desktop_95888e62-b6f6-4a7e-8e2f-19848d084ad7.jpg","https://cdn.goconqr.com/uploads/media/image/26158472/desktop_6a49face-c930-4eb6-b818-9b2fedce39b4.png","https://cdn.goconqr.com/uploads/media/image/26159068/desktop_3c5ece8d-e517-41f1-8f28-cb988104333b.png","https://cdn.goconqr.com/uploads/media/image/26136022/desktop_659cb691-f367-4f39-bb00-7d6f9ea598f8.png","https://cdn.goconqr.com/uploads/media/image/26136021/desktop_a459c434-e379-4041-865d-730b653773e5.png","https://cdn.goconqr.com/uploads/media/image/26138200/desktop_dddd3281-5288-44b6-8af7-80c0b95d188d.png","https://cdn.goconqr.com/uploads/media/image/26138199/desktop_be8cfe2b-c9b6-4da5-bf55-4d13fd109630.png","https://cdn.goconqr.com/uploads/media/image/26138402/desktop_9d2f5daa-39e2-4af1-8aeb-573a72853eb5.jpg","https://cdn.goconqr.com/uploads/media/image/26138404/desktop_3b04dd37-10d8-4b9a-819f-0986c241d232.jpg","https://cdn.goconqr.com/uploads/media/image/26141034/desktop_17de44a8-2172-4467-80ab-22256612126d.png","https://cdn.goconqr.com/uploads/media/image/26141033/desktop_25d53911-ada7-4f24-a2cc-c60e58c8d312.png","https://cdn.goconqr.com/uploads/media/image/26152656/desktop_74131776-e54c-41c6-becc-5900f7e132c9.jpg","https://cdn.goconqr.com/uploads/media/image/26152657/desktop_f4f81dbd-bcd2-41de-9195-5b5dfd272af7.jpg","https://cdn.goconqr.com/uploads/media/image/26156182/desktop_4b783629-1b49-4a53-a033-8e4584afc9f5.png","https://cdn.goconqr.com/uploads/media/image/26156181/desktop_70f600b4-5ba2-40cd-8f2e-18ab6a473f61.jpg","https://cdn.goconqr.com/uploads/media/image/26157890/desktop_d47386f0-5f9f-4d1f-bfe5-3672d535ff71.png","https://cdn.goconqr.com/uploads/media/image/26157889/desktop_6fb8a456-3763-418b-9f2d-e22fc23ac64c.png","https://cdn.goconqr.com/uploads/media/image/26158271/desktop_c6e34f69-e8b4-4076-aac3-13092741d2b8.png","https://cdn.goconqr.com/uploads/media/image/26158270/desktop_1b23202a-a079-4b07-b4ef-7d2c7682c59f.png","https://cdn.goconqr.com/uploads/media/image/26158724/desktop_d880407f-a2c7-425a-bcaf-826b53dbd43e.jpg","https://cdn.goconqr.com/uploads/media/image/26158723/desktop_62387c02-d63f-4dcb-b819-6b76b3dfab53.jpg"]

	Creado por gabriel ribeiro hace más de 4 años

Simulado do exame em ingles para realização da certificação do windows server 2016 MCSA e MCSE.

Windows Server 2016 70-740 - Simulado V

Pregunta 1 de 50

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 2 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 50

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 50

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 14 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 15 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 16 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 17 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 18 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 19 de 50

Question #19 You have a server that runs Windows Server 2016 Standard. You create a new three-way mirror storage space. You format the storage space by using ReFS. Which two features can you use on the new storage space? Each correct answer presents a complete solution.

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 20 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 21 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 22 de 50

Selecciona uno de los siguientes:

Explicación

Pregunta 23 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 24 de 50

Question #24 You have a Nano Server named Nano1. Nano1 is configured to perform real-time protection scans by using Windows Defender. You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans. What should you do?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 25 de 50

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 26 de 50

Question #19

You have a server that runs Windows Server 2016 Standard.
You create a new three-way mirror storage space. You format the storage space by using ReFS.
Which two features can you use on the new storage space? Each correct answer presents a complete solution.

Question #24

You have a Nano Server named Nano1.
Nano1 is configured to perform real-time protection scans by using Windows Defender.
You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans.
What should you do?

Question #26

You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table.

You need to ensure that you can use all of the available space on each disk.
What is one of the disks that you must initialize as a GPT disk?

Question #36

You plan to deploy three servers that will run Windows Server 2016. The servers will be configured as shown in the following table.

You need to ensure that you can use all of the available space on each disk.
What is one of the disks that you must initialize as a GPT disk?

Question #37

You have a server named Server1 that runs Windows Server 2016.
You need to install the DNS Server role on Server1.
What should you run?