Manufacting processes that relate to surface treatments such as polishin, painting, heat treating and joining are...
primary
secondary
tertiary
initial
Manufacturing processes that are used to add or to remove geometric features from the basic form are called...
All of the following are examples of bulk deformation except...
forging
rolling
bar drawing
shearing
Changing the shape or form of the bulk from materials is caused by compressive or tensile yielding is called...
casting
machining
deformation
assembly
The process in which molten metal is poured into a cast to solidify is called...
polymer processing
finishing
The process of plasticity compressing material between two halves of die set by hydraulic pressue or the stroke of a hammer is called...
deforming
The process of solidifing molten metal in a ceramic cast made with wax patterns is called...
investment casting
die casting
sand casting
polymter casting
Which of the following polymer molding methods is used to produce hollow parts with thin walls?
blow casting
injection
compression
transfer
Charge of thermoset or elastometric is formed between heated mold halves under pressure while polymer cure is called...
extrusion
injection molding
compression molding
Manufacturing very complex shapes including internal and external undercuts is possible using...
transfer molding
Cutting or seporating sheet metal along a straight line is called...
blanking
drawing
bending
Forming plastic indentations to form ribs, beads, or lettering on surface of metal is called...
punching
embosing
Plastic deformation of sheet metal using matched punch and die set is...
Which of the following processes is used to produce products such as soda cans, catridge casings, and pots and pans?
Which of the following processes is used to size sheets for subsequent operations...
Removing material from the workpiece by using a sharp cutting tool that shears away chips of material to create desired form or features is called...
anodizing
Which of the following is often used as a secondary process to true up critical dimensions or surfaces or to smooth the surface finish?
polymer process
Removal of material from flat surface by using a rotatng cutting tool is called...
planning
sawing
milling
grinding
Removing material using a translating cutter as a workpiece fieds is called...
Removing material from a translating workpiece and a stationary cutter is called...
shaping
Increasing the diameter of an existing hole with a cutting tool by rotating the workpiece is called
drilling
boring
reaming
facing
The removal of material from a surface using an abrasive spinning wheel is called...
turning
Which machining process produces a smoother surface?
Handling actions, during assembly, include all of the following except...
moving
orienting
placing
shipping
Manufacturing costs include all of the following except...
materials
processing
tooling
Structural steel shapes result from rolling...
blooms
slabs
sheets
billets
Bar and rod shapes result from rolling...
sheet
Processing costs per part is proportional to...
tooling costs
material costs
cycle time
recycle time
Tooling costs per part is reduced by...
increasing the cycle time
increasing the run quantity
decreasing the material wastes
Manufacturing costs shuold be minimized by reducing...
processing costs
total costs
