NSE 4

Pregunta 1 de 110

1

Which of the following regular expression patterns make the terms "confidential data" case
insensitive?

Selecciona una de las siguientes respuestas posibles:

[confidential data]
/confidential data/i
i/confidential data/
"confidential data"/

Explicación

Pregunta 2 de 110

1

Which statements are correct regarding virtual domains (VDOMs)? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

VDOMs divide a single FortiGate unit into two or more virtual units that each have dedicated
memory and CPUs.
A management VDOM handles SNMP, logging, alert email, and FDN-based updates.)
VDOMs share firmware versions, as well as antivirus and IPS databases.
Different time zones can be configured in each VDOM.

Explicación

Pregunta 3 de 110

1

Which statements are true regarding IPv6 anycast addresses? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Multiple interfaces can share the same anycast address.
They are allocated from the multicast address space.ss.
Different nodes cannot share the same anycast address.
An anycast packet is routed to the nearest interface.

Explicación

Pregunta 4 de 110

1

In HA, the option Reserve Management Port for Cluster Member is selected as shown in the
exhibit below.

Which statements are correct regarding this setting? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Interface settings on port7 will not be synchronized with other cluster members.
The IP address assigned to this interface must not overlap with the IP address subnet assigned to
another interface.
When connecting to port7 you always connect to the master device.
A gateway address may be configured for port7.

Explicación

Pregunta 5 de 110

1

Which tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection?
(Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The web client SSL handshake.
The web server SSL handshake.
File buffering.
Communication with the URL filter process.

Explicación

Pregunta 6 de 110

1

Which statements are true regarding traffic shaping that is applied in an application sensor, and
associated with a firewall policy? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Shared traffic shaping cannot be used.
Only traffic matching the application control signature is shaped.
Can limit the bandwidth usage of heavy traffic applications.
Per-IP traffic shaping cannot be used.

Explicación

Pregunta 7 de 110

1

The FortiGate port1 is connected to the Internet. The FortiGate port2 is connected to the internal network. Examine the firewall configuration shown in the exhibit; then answer the question below.

Based on the firewall configuration illustrated in the exhibit, which statement is correct?

Selecciona una de las siguientes respuestas posibles:

A user that has not authenticated can access the Internet using any protocol that does not trigger
an authentication challenge.
A user that has not authenticated can access the Internet using any protocol except HTTP, HTTPS,
Telnet, and FTP.
A user must authenticate using the HTTP, HTTPS, SSH, FTP, or Telnet protocol before they can
access all Internet services.
DNS Internet access is always allowed, even for users that has not authenticated.

Explicación

Pregunta 8 de 110

1

Review the IPsec phase 2 configuration shown in the exhibit; then answer the question below.

Which statements are correct regarding this configuration? (Choose two.).

Selecciona una o más de las siguientes respuestas posibles:

The Phase 2 will re-key even if there is no traffic.
There will be a DH exchange for each re-key.
The sequence number of ESP packets received from the peer will not be checked.
Quick mode selectors will default to those used in the firewall policy.

Explicación

Pregunta 9 de 110

1

Which of the following statements are correct about the HA command diagnose sys ha resetuptime?
(Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The device this command is executed on is likely to switch from master to slave status if override is
disabled.
The device this command is executed on is likely to switch from master to slave status if override is
enabled.
This command has no impact on the HA algorithm.
This command resets the uptime variable used in the HA algorithm so it may cause a
new master to become elected.

Explicación

Pregunta 10 de 110

1

When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP
address is used as the source of the HTTP request?

Selecciona una de las siguientes respuestas posibles:

The remote user's virtual IP address.
The FortiGate unit's internal IP address.
The remote user's public IP address.
The FortiGate unit's external IP address.rithm.

Explicación

Pregunta 11 de 110

1

Which two web filtering inspection modes inspect the full URL? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

DNS-based.
Proxy-based.
Flow-based.
URL-based.

Explicación

Pregunta 12 de 110

1

Which statement correctly describes the output of the command diagnose ips anomaly list?

Selecciona una de las siguientes respuestas posibles:

Lists the configured DoS policy.
List the real-time counters for the configured DoS policy.
Lists the errors captured when compiling the DoS policy.
Lists the IPS signature matches.

Explicación

Pregunta 13 de 110

1

Review the IPsec diagnostics output of the command diagnose vpn tunnel list shown in the exhibit.

Which statements is correct regarding this output? (Select one answer).

Selecciona una de las siguientes respuestas posibles:

One tunnel is rekeying.
Two tunnels are rekeying.
Two tunnels are up.
One tunnel is up.

Explicación

Pregunta 14 de 110

1

Which statement describes what the CLI command diagnose debug authd fsso list is used for?

Selecciona una de las siguientes respuestas posibles:

Monitors communications between the FSSO collector agent and FortiGate unit.
Displays which users are currently logged on using FSSO.
Displays a listing of all connected FSSO collector agents.
Lists all DC Agents installed on all domain controllers.

Explicación

Pregunta 15 de 110

1

Which statements are correct properties of a partial mesh VPN deployment. (Choose two.

Selecciona una o más de las siguientes respuestas posibles:

VPN tunnels interconnect between every single location.
VPN tunnels are not configured between every single location.
Some locations are reached via a hub location.
There are no hub locations in a partial mesh.

Explicación

Pregunta 16 de 110

1

Examine the exhibit below; then answer the question following it.
In this scenario, the FortiGate unit in Ottawa has the following routing table:
S* 0.0.0.0/0 [10/0] via 172.20.170.254, port2
C 172.20.167.0/24 is directly connected, port1
C 172.20.170.0/24 is directly connected, port2

Sniffer tests show that packets sent from the source IP address 172.20.168.2 to the destination IP
address 172.20.169.2 are being dropped by the FortiGate located in Ottawa. Which of the following correctly describes the cause for the dropped packets?

Selecciona una de las siguientes respuestas posibles:

The forward policy check
The reverse path forwarding check.
The subnet 172.20.169.0/24 is NOT in the Ottawa FortiGate's routing table.
The destination workstation 172.20.169.2 does NOT have the subnet 172.20.168.0/24 in its routing table.

Explicación

Pregunta 17 de 110

1

Which statements are correct regarding application control? (Choose two.).

Selecciona una o más de las siguientes respuestas posibles:

It is based on the IPS engine.
It is based on the AV engine.
It can be applied to SSL encrypted traffic.
Application control cannot be applied to SSL encrypted traffic.

Explicación

Pregunta 18 de 110

1

Which statement regarding the firewall policy authentication timeout is true?

Selecciona una de las siguientes respuestas posibles:

It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets
coming from the user's source IP.
It is a hard timeout. The FortiGate removes the temporary policy for a user's source IP address
after this timer has expired.
It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets
coming from the user's source MAC.
It is a hard timeout. The FortiGate removes the temporary policy for a user's source MAC address
after this timer has expired.

Explicación

Pregunta 19 de 110

1

An administrator wants to create an IPsec VPN tunnel between two FortiGate devices.
Which three configuration steps must be performed on both units to support this scenario? (Choose
three.)

Selecciona una o más de las siguientes respuestas posibles:

Create firewall policies to allow and control traffic between the source and destination IP
addresses.)
Configure the appropriate user groups to allow users access to the tunnel.
Set the operating mode to IPsec VPN mode.
Define the phase 2 parameters.
Define the Phase 1 parameters.

Explicación

Pregunta 20 de 110

1

Which statements are correct regarding an IPv6 over IPv4 IPsec configuration? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The source quick mode selector must be an IPv4 address.
The destination quick mode selector must be an IPv6 address.
The Local Gateway IP must be an IPv4 address.
The remote gateway IP must be an IPv6 address.

Explicación

Pregunta 21 de 110

1

Examine the static route configuration shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.1.0 255.255.255.0
set device port1 set gateway 172.11.12.1
set distance 10
set weight 5
next
edit 2
set dst 172.20.1.0 255.255.255.0
set blackhole enable
set distance 5
set weight 10
next
end
Which of the following statements correctly describes the static routing configuration provided? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

All traffic to 172.20.1.0/24 is dropped by the FortiGate.
As long as port1 is up, all traffic to 172.20.1.0/24 is routed by the static route number 1. If the interface port1 is down, the traffic is routed using the blackhole route.
The FortiGate unit does NOT create a session entry in the session table when the traffic is being routed by the blackhole route.
The FortiGate unit creates a session entry in the session table when the traffic is being routed by the blackhole route.

Explicación

Pregunta 22 de 110

1

Which network protocols are supported for administrative access to a FortiGate unit? (Choose
three.)

Selecciona una o más de las siguientes respuestas posibles:

SNMP
WINS
HTTP
Telnet
SSH

Explicación

Pregunta 23 de 110

1

Which header field can be used in a firewall policy for traffic matching?

Selecciona una de las siguientes respuestas posibles:

ICMP type and code.
DSCP.
TCP window size.
TCP sequence number.

Explicación

Pregunta 24 de 110

1

Which statements are correct for port pairing and forwarding domains? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

They both create separate broadcast domains.
Port Pairing works only for physical interfaces.
Forwarding Domain only applies to virtual interfaces.
They may contain physical and/or virtual interfaces.

Explicación

Pregunta 25 de 110

1

An administrator has formed a high availability cluster involving two FortiGate units.
[ Multiple upstream Layer 2 switches] -- [ FortiGate HA Cluster ] -- [ Multiple downstream Layer2 switches ]
The administrator wishes to ensure that a single link failure will have minimal impact upon the overall throughput of traffic through this cluster.
Which of the following options describes the best step the administrator can take?
The administrator should _____________________.

Selecciona una de las siguientes respuestas posibles:

Increase the number of FortiGate units in the cluster and configure HA in active-active mode.
Enable monitoring of all active interfaces.
Set up a full-mesh design which uses redundant interfaces.
Configure the HA ping server feature to allow for HA failover in the event that a path is disrupted.

Explicación

Pregunta 26 de 110

1

When the SSL proxy is NOT doing man-in-the-middle interception of SSL traffic, which certificate field can be used to determine the rating of a website?

Selecciona una de las siguientes respuestas posibles:

Organizational Unit.
Common Name.
Serial Number.
Validity.

Explicación

Pregunta 27 de 110

1

A user logs into a SSL VPN portal and activates the tunnel mode. The administrator has enabled split tunneling. The exhibit shows the firewall policy configuration:
Which static route is automatically added to the client's routing table when the tunnel mode is activated?

Selecciona una de las siguientes respuestas posibles:

A route to a destination subnet matching the Internal_Servers address object.
A route to the destination subnet configured in the tunnel mode widget.
A default route.
A route to the destination subnet configured in the SSL VPN global settings.

Explicación

Pregunta 28 de 110

1

Examine the following output from the diagnose sys session list command:
session info: proto=6 proto_state=65 duration=3 expire=9 timeout=3600
flags=00000000 sockflag=00000000 sockport=443 av_idx=9 use=5
origin-shaper=guarantee-100kbps prio=2 guarantee 12800Bps max 134217728Bps traffic13895Bps
reply-shaper=guarantee-100kbps prio=2 guarantee 12800Bps max 134217728Bps traffic 13895Bps
state=redir local may_dirty ndr npu nlb os rs
statistic(bytes/packets/allow_err): org=864/8/1 reply=2384/7/1 tuples=3
orgin->sink: org pre->post, reply pre->post dev=7->6/6->7 gwy=172.17.87.3/10.1.10.1
hook=post dir=org act=snat 192.168.1.110:57999->74.201.86.29:443(172.17.87.16:57999)
hook=pre dir=reply act=dnat 74.201.86.29:443->172.17.87.16:57999(192.168.1.110:57999)
hook=post dir=reply act=noop 74.201.86.29:443->192.168.1.110:57999(0.0.0.0:0)
misc=0 policy_id=1 id_policy_id=0 auth_info=0 chk_client_info=0 vd=0
npu info: flag=0x00/0x00, offload=0/0, ips_offload=0/0, epid=0/0, ipid=0/0, vlan=0/0

Which statements are true regarding the session above? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Session Time-To-Live (TTL) was configured to 9 seconds.
FortiGate is doing NAT of both the source and destination IP addresses on all packets coming from
the 192.168.1.110 address.
The IP address 192.168.1.110 is being translated to 172.17.87.16.
The FortiGate is not translating the TCP port numbers of the packets in this session.

Explicación

Pregunta 29 de 110

1

Review the static route configuration for IPsec shown in the exhibit; then answer the question below.
Which statements are correct regarding this configuration? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Interface remote is an IPsec interface.
A gateway address is not required because the interface is a point-to-point connection.
A gateway address is not required because the default route is used.
Interface remote is a zone.

Explicación

Pregunta 30 de 110

1

Two FortiGate units with NP6 processors form an active-active cluster. The cluster is doing
security profile (UTM) inspection over all the user traffic. What statements are true regarding the
sessions that the master unit is offloading to the slave unit for inspection? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

They are accelerated by hardware in the master unit.nit.
They are not accelerated by hardware in the master unit.
They are accelerated by hardware in the slave unit.unit.
They are not accelerated by hardware in the slave unit.

Explicación

Pregunta 31 de 110

1

In the case of TCP traffic, which of the following correctly describes the routing table lookups performed by a FortiGate operating in NAT/Route mode, when searching for a suitable gateway?)

Selecciona una de las siguientes respuestas posibles:

A lookup is done only when the first packet coming from the client (SYN) arrives.
A lookup is done when the first packet coming from the client (SYN) arrives, and a second one is
performed when the first packet coming from the server (SYN/ACK) arrives.
Three lookups are done during the TCP 3-way handshake (SYN, SYN/ACK, ACK).
A lookup is always done each time a packet arrives, from either the server or the client side.

Explicación

Pregunta 32 de 110

1

In which process states is it impossible to interrupt/kill a process? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

S - Sleep
R - Running
D - Uninterruptable Sleep
Z - Zombie

Explicación

Pregunta 33 de 110

1

The order of the firewall policies is important. Policies can be re-ordered from either the GUI or the CLI.
Which CLI command is used to perform this function?

Selecciona una de las siguientes respuestas posibles:

set order
edit policy
reorder
move

Explicación

Pregunta 34 de 110

1

Which statements are correct regarding URL filtering on a FortiGate unit? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The allowed actions for URL filtering include allow, block, monitor and exempt.
The allowed actions for URL filtering are Allow and Block only.
URL filters may be based on patterns using simple text, wildcards and regular expressions.
URL filters are based on simple text only and require an exact match.

Explicación

Pregunta 35 de 110

1

Regarding the header and body sections in raw log messages, which statement is correct?

Selecciona una de las siguientes respuestas posibles:

The header and body section layouts change depending on the log type.
The header section layout is always the same regardless of the log type. The body section layout
changes depending on the log type.
Some log types include multiple body sections.
Some log types do not include a body section.

Explicación

Pregunta 36 de 110

1

Which statements correctly describe transparent mode operation? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

The FortiGate acts as transparent bridge and forwards traffic at Layer-2.
Ethernet packets are forwarded based on destination MAC addresses, NOT IP addresses.
The transparent FortiGate is clearly visible to network hosts in an IP trace route.
Permits inline traffic inspection and firewalling without changing the IP scheme of the network.
All interfaces of the transparent mode FortiGate device must be on different IP subnets.

Explicación

Pregunta 37 de 110

1

Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 10
set device port1
next
edit 2
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 20
set device port2
next
end
Which of the following statements correctly describes the static routing configuration provided above?

Selecciona una de las siguientes respuestas posibles:

The FortiGate evenly shares the traffic to 172.20.168.0/24 through both routes.
The FortiGate shares the traffic to 172.20.168.0/24 through both routes, but the port2 route will carry approximately twice as much of the traffic.
The FortiGate sends all the traffic to 172.20.168.0/24 through port1.
Only the route that is using port1 will show up in the routing table.

Explicación

Pregunta 38 de 110

1

When creating FortiGate administrative users, which configuration objects specify the account rights??

Selecciona una de las siguientes respuestas posibles:

Remote access profiles.
User groups.
Administrator profiles.
Local-in policies.iles.

Explicación

Pregunta 39 de 110

1

FSSO provides a single sign on solution to authenticate users transparently to a FortiGate unit using credentials stored in Windows active directory.
Which of the following statements are correct regarding FSSO in a Windows domain environment when agent mode is used? (Choose two.))

Selecciona una o más de las siguientes respuestas posibles:

An FSSO collector agent must be installed on every domain controller.
An FSSO domain controller agent must be installed on every domain controller.
The FSSO domain controller agent will regularly update user logon information on the FortiGate
unit.
The FSSO collector agent will receive user logon information from the domain controller agent and
will send it to the FortiGate unit.

Explicación

Pregunta 40 de 110

1

A FortiGate is configured with multiple VDOMs. An administrative account on the device has been assigned a Scope value of VDOM:root.
Which of the following settings will this administrator be able to configure? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Firewall addresses.
DHCP servers.
FortiGuard Distribution Network configuration.
System hostname.

Explicación

Pregunta 41 de 110

1

Which statement is an advantage of using a hub and spoke IPsec VPN configuration instead of a fully-meshed set of IPsec tunnels?

Selecciona una de las siguientes respuestas posibles:

Using a hub and spoke topology provides full redundancy.
Using a hub and spoke topology requires fewer tunnels.
Using a hub and spoke topology uses stronger encryption protocols.
Using a hub and spoke topology requires more routes.

Explicación

Pregunta 42 de 110

1

Bob wants to send Alice a file that is encrypted using public key cryptography.
Which of the following statements is correct regarding the use of public key cryptography in this scenario?

Selecciona una de las siguientes respuestas posibles:

Bob will use his private key to encrypt the file and Alice will use her private key to decrypt the file.
Bob will use his public key to encrypt the file and Alice will use Bob's private key to decrypt the file.
Bob will use Alice's public key to encrypt the file and Alice will use her private key to decrypt the file.
Bob will use his public key to encrypt the file and Alice will use her private key to decrypt the file.

Explicación

Pregunta 43 de 110

1

What is a valid reason for using session based authentication instead of IP based authentication in a FortiGate web proxy solution?

Selecciona una de las siguientes respuestas posibles:

Users are required to manually enter their credentials each time they connect to a different web site.
Proxy users are authenticated via FSSO.
There are multiple users sharing the same IP address.
Proxy users are authenticated via RADIUS.

Explicación

Pregunta 44 de 110

1

Which two methods are supported by the web proxy auto-discovery protocol (WPAD) to automatically learn the URL where a PAC file is located? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

DHCP
BOOTP
DNS
IPv6 autoconfiguration

Explicación

Pregunta 45 de 110

1

The exhibit shows the Disconnect Cluster Member command in a FortiGate unit that is part of a HA cluster with two HA members.
What is the effect of the Disconnect Cluster Member command as given in the exhibit. (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Port3 is configured with an IP address for management access.
The firewall rules are purged on the disconnected unit.
The HA mode changes to standalone.FSSO.
The system hostname is set to the unit serial number.

Explicación

Pregunta 46 de 110

1

What capabilities can a FortiGate provide? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Mail relay.
Email filtering.
Firewall.
VPN gateway.
Mail server.

Explicación

Pregunta 47 de 110

1

With FSSO, a domain user could authenticate either against the domain controller running the collector agent and domain controller agent, or a domain controller running only the domain controller agent.

Selecciona una o más de las siguientes respuestas posibles:

The login event is sent to the collector agent.
The FortiGate receives the user information directly from the receiving domain controller agent of the secondary domain controller.
The domain collector agent may perform a DNS lookup for the authenticated client's IP address.
The user cannot be authenticated with the FortiGate in this manner because each domain
controller agent requires a dedicated collector agent.

Explicación

Pregunta 48 de 110

1

What functions can the IPv6 Neighbor Discovery protocol accomplish? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Negotiate the encryption parameters to use.
Auto-adjust the MTU setting.
Autoconfigure addresses and prefixes.
Determine other nodes reachability.

Explicación

Pregunta 49 de 110

1

Review the configuration for FortiClient IPsec shown in the exhibit.
Which statement is correct regarding this configuration?

Selecciona una de las siguientes respuestas posibles:

The connecting VPN client will install a route to a destination corresponding to the student_internal address object.
The connecting VPN client will install a default route.
The connecting VPN client will install a route to the 172.20.1.[1-5] address range.
The connecting VPN client will connect in web portal mode and no route will be installed.

Explicación

Pregunta 50 de 110

1

For data leak prevention, which statement describes the difference between the block and quarantine actions?

Selecciona una de las siguientes respuestas posibles:

A block action prevents the transaction. A quarantine action blocks all future transactions,
regardless of the protocol.
A block action prevents the transaction. A quarantine action archives the data.
A block action has a finite duration. A quarantine action must be removed by an administrator.
A block action is used for known users. A quarantine action is used for unknown users.

Explicación

Pregunta 51 de 110

1

Examine at the output below from the diagnose sys top command:
# diagnose sys top 1
RunTime: 11 days, 3 hours and 29 minutes
0U, 0N, 1S, 99I; 971T, 528F, 160KF
sshd 123 S 1.9 1.2
ipsengine 61 S < 0.0 5.2
miglogd 45 S 0.0 4.9
pyfcgid 75 S 0.0 4.5
pyfcgid 73 S 0.0 3.9
Which statements are true regarding the output above?

Selecciona una o más de las siguientes respuestas posibles:

The sshd process is the one consuming most CPU.
The sshd process is using 123 pages of memory.
The command diagnose sys kill miglogd will restart the miglogd process.
All the processes listed are in sleeping state.

Explicación

Pregunta 52 de 110

1

A static route is configured for a FortiGate unit from the CLI using the following commands:
config router static
edit 1
set device "wan1"
set distance 20
set gateway 192.168.100.1
next
end

Which of the following conditions are required for this static default route to be displayed in
the FortiGate unit's routing table?

Selecciona una o más de las siguientes respuestas posibles:

The administrative status of the wan1 interface is displayed as down.
The link status of the wan1 interface is displayed as up.
All other default routes should have a lower distance.
The wan1 interface address and gateway address are on the same subnet.

Explicación

Pregunta 53 de 110

1

Which IPsec mode includes the peer id information in the first packet?

Selecciona una de las siguientes respuestas posibles:

Main mode.
Quick mode.
Aggressive mode.
IKEv2 mode.mode.

Explicación

Pregunta 54 de 110

1

Review the IPsec phase 1 configuration in the exhibit; then answer the question below.

Which statements are correct regarding this configuration? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The remote gateway address on 10.200.3.1
The local IPsec interface address is 10.200.3.1
The local gateway IP is the address assigned to port1.
The local gateway IP address is 10.200.3.1

Explicación

Pregunta 55 de 110

1

Data leak prevention archiving gives the ability to store files and message data onto a FortiAnalyzer unit for which of the following types of network traffic? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

POP3
SNMP
IPsec
SMTP
HTTP

Explicación

Pregunta 56 de 110

1

Review the IPS sensor filter configuration shown in the exhibit

Based on the information in the exhibit, which statements are correct regarding the filter? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

It does not log attacks targeting Linux servers.
It matches all traffic to Linux servers.
Its action will block traffic matching these signatures.
It only takes effect when the sensor is applied to a policy.

Explicación

Pregunta 57 de 110

1

How is the FortiGate password recovery process?

Selecciona una de las siguientes respuestas posibles:

Interrupt boot sequence, modify the boot registry and reboot. After changing the password, reset the boot registry.
Log in through the console port using the "maintainer" account within several seconds of physically
power cycling the FortiGate.
Hold down the CTRL + Esc (Escape) keys during reboot, then reset the admin password.
Interrupt the boot sequence and restore a configuration file for which the password has been modified.

Explicación

Pregunta 58 de 110

1

Review the IPsec diagnostics output of the command diagnose vpn tunnel list shown in the exhibit below.
Which statements are correct regarding this output? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The connecting client has been allocated address 172.20.1.1
In the Phase 1 settings, dead peer detection is enabled.
The tunnel is idle.
The connecting client has been allocated address 10.200.3.1.

Explicación

Pregunta 59 de 110

1

Which firewall objects can be included in the Destination Address field of a firewall policy? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

IP address pool.
Virtual IP address.
IP address
IP address group.
MAC address.

Explicación

Pregunta 60 de 110

1

A FortiGate is configured to receive push updates from the FortiGuard Distribution Network, however, updates are not being received.
Which are two reasons for this problem? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The FortiGate is connected to multiple ISPs.
There is a NAT device between the FortiGate and the FortiGuard Distribution Network.
The FortiGate is in Transparent mode.
The external facing interface of the FortiGate is configured to get the IP address from a DHCP server.

Explicación

Pregunta 61 de 110

1

In transparent mode, forward-domain is an CLI setting associate with ______________.

Selecciona una de las siguientes respuestas posibles:

a static route.
a firewall policy.
an interface.
a virtual domain.

Explicación

Pregunta 62 de 110

1

A FortiGate is configured with three virtual domains (VDOMs).
Which of the following statements is correct regarding multiple VDOMs?

Selecciona una de las siguientes respuestas posibles:

The FortiGate must be a model 1000 or above to support multiple VDOMs.
A license has to be purchased and applied to the FortiGate before VDOM mode could be enabled.
Changing the operational mode of a VDOM requires a reboot of the FortiGate.
The FortiGate supports any combination of VDOMs in NAT/Route and transparent modes.

Explicación

Pregunta 63 de 110

1

How do you configure a FortiGate to apply traffic shaping to P2P traffic, such as BitTorrent?

Selecciona una de las siguientes respuestas posibles:

Apply a traffic shaper to a BitTorrent entry in an application control list, which is then applied to a
firewall policy.
Enable the shape option in a firewall policy with service set to BitTorrent.
Define a DLP rule to match against BitTorrent traffic and include the rule in a DLP sensor with
traffic shaping enabled.
Apply a traffic shaper to a protocol options profile.

Explicación

Pregunta 64 de 110

1

Review the output of the command get router info routing-table database shown in the
exhibit below; then answer the question following it.
Which two statements are correct regarding this output? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

There will be six routes in the routing table.
There will be seven routes in the routing table.
There will be two default routes in the routing table.
There will be two routes for the 10.0.2.0/24 subnet in the routing table.

Explicación

Pregunta 65 de 110

1

What is the maximum number of FortiAnalyzer/FortiManager devices a FortiGate unit can be
configured to send logs to?

Selecciona una de las siguientes respuestas posibles:

1
2
3
4

Explicación

Pregunta 66 de 110

1

Which antivirus inspection mode must be used to scan SMTP, FTP, POP3 and SMB protocols?

Selecciona una de las siguientes respuestas posibles:

Proxy-based.
DNS-based.
Flow-based.
Man-in-the-middle.

Explicación

Pregunta 67 de 110

1

Which statements are true regarding the factory default configuration? (Choose three.)?

Selecciona una o más de las siguientes respuestas posibles:

The default web filtering profile is applied to the first firewall policy.
The 'Port1' or 'Internal' interface has the IP address 192.168.1.99.
The implicit firewall policy action is ACCEPT.
The 'Port1' or 'Internal' interface has a DHCP server set up and enabled (on device models that
support DHCP servers).
Default login uses the username: admin (all lowercase) and no password.

Explicación

Pregunta 68 de 110

1

Which statement is correct regarding virus scanning on a FortiGate unit?

Selecciona una de las siguientes respuestas posibles:

Virus scanning is enabled by default.
Fortinet customer support enables virus scanning remotely for you. unit?
Virus scanning must be enabled in a security profile, which must be applied to a firewall policy.
Enabling virus scanning in a security profile enables virus protection for all traffic flowing through
the FortiGate.

Explicación

Pregunta 69 de 110

1

Examine the following FortiGate web proxy configuration; then answer the question below:
config web-proxy explicit
set pac-file-server-status enable
set pac-file-server-port 8080
set pac-filename wpad.dat
end
Assuming that the FortiGate proxy IP address is 10.10.1.1, which URL must an Internet browser use to download the PAC file?

Selecciona una de las siguientes respuestas posibles:

https://10.10.1.1:8080
https://10.10.1.1:8080/wpad.dat
http://10.10.1.1:8080/
http://10.10.1.1:8080/wpad.dat

Explicación

Pregunta 70 de 110

1

In a high availability cluster operating in active-active mode, which of the following correctly
describes the path taken by the SYN packet of an HTTP session that is offloaded to a slave unit?

Selecciona una de las siguientes respuestas posibles:

Request: internal host; slave FortiGate; master FortiGate; Internet; web server.
Request: internal host; slave FortiGate; Internet; web server.
Request: internal host; slave FortiGate; master FortiGate; Internet; web server
Request: internal host; master FortiGate; slave FortiGate; Internet; web server.

Explicación

Pregunta 71 de 110

1

For traffic that does match any configured firewall policy, what is the default action taken by the FortiGate?

Selecciona una de las siguientes respuestas posibles:

The traffic is allowed and no log is generated.
The traffic is allowed and logged.
The traffic is blocked and no log is generated.
The traffic is blocked and logged.

Explicación

Pregunta 72 de 110

1

Which are two requirements for DC-agent mode FSSO to work properly in a Windows AD environment? [Choose two.]?

Selecciona una o más de las siguientes respuestas posibles:

DNS server must properly resolve all workstation names.
The remote registry service must be running in all workstations.
The collector agent must be installed in one of the Windows domain controllers.
A same user cannot be logged in into two different workstations at the same time.

Explicación

Pregunta 73 de 110

1

What logging options are supported on a FortiGate unit? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

LDAP
Syslog
FortiAnalyzer
SNMP

Explicación

Pregunta 74 de 110

1

In which order are firewall policies processed on a FortiGate unit?

Selecciona una de las siguientes respuestas posibles:

From top to down, according with their sequence number.
From top to down, according with their policy ID number.
Based on best match.
Based on the priority value.

Explicación

Pregunta 75 de 110

1

Two devices are in an HA cluster, the device hostnames are STUDENT and REMOTE.
Exhibit A shows the command output of diagnose sys session stat for the STUDENT device.
Exhibit B shows the command output of diagnose sys session stat for the REMOTE device.
Exhibit B: Given the information provided in the exhibits, which of the following statements are correct? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

STUDENT is likely to be the master device.
Session-pickup is likely to be enabled.
The cluster mode is active-passive.
There is not enough information to determine the cluster mode.

Explicación

Pregunta 76 de 110

1

What are the requirements for a HA cluster to maintain TCP connections after device or link failover? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Enable session pick-up.
Enable override.
Connections must be UDP or ICMP.
Connections must not be handled by a proxy.

Explicación

Pregunta 77 de 110

1

Examine the following CLI configuration:
config system session-ttl
set default 1800
end
What statement is true about the effect of the above configuration line?

Selecciona una de las siguientes respuestas posibles:

Sessions can be idle for no more than 1800 seconds.
The maximum length of time a session can be open is 1800 seconds.
After 1800 seconds, the end user must re-authenticate.
After a session has been open for 1800 seconds, the FortiGate sends a keepalive packet to both
client and server.

Explicación

Pregunta 78 de 110

1

Which statements regarding banned words are correct? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Content is automatically blocked if a single instance of a banned word appears.
The FortiGate updates banned words on a periodic basis.
The FortiGate can scan web pages and email messages for instances of banned words.
Banned words can be expressed as simple text, wildcards and regular expressions.

Explicación

Pregunta 79 de 110

1

What methods can be used to access the FortiGate CLI? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Using SNMP.
A direct connection to the serial console port.
Using the CLI console widget in the GUI.
Using RCP.

Explicación

Pregunta 80 de 110

1

When firewall policy authentication is enabled, which protocols can trigger an authentication challenge? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

SMTP
POP3
HTTP
FTP

Explicación

Pregunta 81 de 110

1

A FortiGate is operating in NAT/Route mode and configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface.
Which one of the following statements is correct regarding the VLAN IDs in this scenario?

Selecciona una de las siguientes respuestas posibles:

The two VLAN sub-interfaces can have the same VLAN ID only if they have IP addresses in different
subnets.
The two VLAN sub-interfaces must have different VLAN IDs.
The two VLAN sub-interfaces can have the same VLAN ID only if they belong to different VDOMs.
The two VLAN sub-interfaces can have the same VLAN ID if they are connected to different L2 IEEE
802.1Q compliant switches.

Explicación

Pregunta 82 de 110

1

Which two statements are true regarding firewall policy disclaimers? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

They cannot be used in combination with user authentication.
They can only be applied to wireless interfaces.
Users must accept the disclaimer to continue.
The disclaimer page is customizable.

Explicación

Pregunta 83 de 110

1

Which statements are true regarding local user authentication? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Two-factor authentication can be enabled on a per user basis.
Local users are for administration accounts only and cannot be used to authenticate network
users.
Administrators can create the user accounts is a remote server and store the user passwords
locally in the FortiGate.
Both the usernames and passwords can be stored locally on the FortiGate

Explicación

Pregunta 84 de 110

1

You are the administrator in charge of a FortiGate acting as an IPsec VPN gateway using route-based mode.
Users from either side must be able to initiate new sessions. There is only 1 subnet at either end and the FortiGate already has a default route.
Which two configuration steps are required to achieve these objectives? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Create one firewall policy.
Create two firewall policies.
Add a route to the remote subnet.
Add two IPsec phases 2.

Explicación

Pregunta 85 de 110

1

Examine the exhibit; then answer the question below.
The Vancouver FortiGate initially had the following information in its routing table: S 172.20.0.0/16 [10/0] via 172.21.1.2, port2 C 172.21.0.0/16 is directly connected, port2 C 172.11.11.0/24 is directly connected, port1
Afterwards, the following static route was added:
config router static edit 6
set dst 172.20.1.0 255.255.255.0
set pririoty 0
set device port1
set gateway 172.11.12.1
next
end
Since this change, the new static route is NOT showing up in the routing table.
Given the information provided, which of the following describes the cause of this problem?

Selecciona una de las siguientes respuestas posibles:

The subnet 172.20.1.0/24 is overlapped with the subnet of one static route that is already in the
routing table (172.20.0.0/16), so, we need to enable allow-subnet-overlap first.
The 'gateway' IP address is NOT in the same subnet as the IP address of port1.
The priority is 0, which means that the route will remain inactive.
The static route configuration is missing the distance setting.

Explicación

Pregunta 86 de 110

1

Regarding the use of web-only mode SSL VPN, which statement is correct?

Selecciona una de las siguientes respuestas posibles:

It supports SSL version 3 only.
It requires a Fortinet-supplied plug-in on the web client.
It requires the user to have a web browser that supports 64-bit cipher length.
The JAVA run-time environment must be installed on the client.

Explicación

Pregunta 87 de 110

1

Regarding tunnel-mode SSL VPN, which three statements are correct? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Split tunneling is supported.
It requires the installation of a VPN client.
It requires the use of an Internet browser.
It does not support traffic from third-party network applications.
An SSL VPN IP address is dynamically assigned to the client by the FortiGate unit.

Explicación

Pregunta 88 de 110

1

What are valid options for handling DNS requests sent directly to a FortiGates interface IP? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Conditional-forward.
Forward-only.
Non-recursive.
Iterative.
Recursive.

Explicación

Pregunta 89 de 110

1

Which statements are true regarding the use of a PAC file to configure the web proxy settings in an Internet browser? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Only one proxy is supported.
Can be manually imported to the browser.
The browser can automatically download it from a web server.
Can include a list of destination IP subnets where the browser can connect directly to without
using a proxy.

Explicación

Pregunta 90 de 110

1

Which of the following sequences describes the correct order of criteria used for the selection of a master unit within a FortiGate high availability (HA) cluster when override is disabled?

Selecciona una de las siguientes respuestas posibles:

1. port monitor, 2. unit priority, 3. up time, 4. serial number.
1. port monitor, 2. up time, 3. unit priority, 4. serial number.
1. unit priority, 2. up time, 3. port monitor, 4. serial number.
1. up time, 2. unit priority, 3. port monitor, 4. serial number.

Explicación

Pregunta 91 de 110

1

Which is one of the conditions that must be met for offloading the encryption and decryption of IPsec traffic to an NP6 processor?

Selecciona una de las siguientes respuestas posibles:

No protection profile can be applied over the IPsec traffic.
Phase-2 anti-replay must be disabled.
Both the phase 1 and phases 2 must use encryption algorithms supported by the NP6.
sec traffic must not be inspected by any FortiGate session helper.

Explicación

Pregunta 92 de 110

1

Which is an advantage of using SNMP v3 instead of SNMP v1/v2 when querying a FortiGate unit?

Selecciona una de las siguientes respuestas posibles:

MIB-based report uploads.
SNMP access limited by access lists.
Packet encryption.
Running SNMP service on a non-standard port is possible.

Explicación

Pregunta 93 de 110

1

Examine the following log message for IPS:
2012-07-01 09:54:28 oid=2 log_id=18433 type=ips subtype=anomaly pri=alert vd=root
severity="critical" src="192.168.3.168" dst="192.168.3.170" src_int="port2" serial=0
status="detected" proto=1 service="icmp" count=1 attack_name="icmp_flood" icmp_id="0xa8a4"
icmp_type="0x08" icmp_code="0x00" attack_id=16777316 sensor="1"
ref="http://www.fortinet.com/ids/VID16777316" msg="anomaly: icmp_flood, 51 > threshold 50"
Which statement is correct about the above log? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The target is 192.168.3.168.
The target is 192.168.3.170.
The attack was NOT blocked.
The attack was blocked.

Explicación

Pregunta 94 de 110

1

Which antivirus and attack definition update options are supported by FortiGate units? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Manual update by downloading the signatures from the support site.
Pull updates from the FortiGate.
Push updates from a FortiAnalyzer.
execute fortiguard-AV-AS command from the CLI.

Explicación

Pregunta 95 de 110

1

Review the IKE debug output for IPsec shown in the exhibit below.
Which statements is correct regarding this output?

Selecciona una de las siguientes respuestas posibles:

The output is a phase 1 negotiation.
The output is a phase 2 negotiation.
The output captures the dead peer detection messages.
The output captures the dead gateway detection packets.

Explicación

Pregunta 96 de 110

1

Which IPsec configuration mode can be used for implementing GRE-over-IPsec VPNs?

Selecciona una de las siguientes respuestas posibles:

Policy-based only.
Route-based only.
Either policy-based or route-based VPN.
GRE-based only.

Explicación

Pregunta 97 de 110

1

What is IPsec Perfect Forwarding Secrecy (PFS)?

Selecciona una de las siguientes respuestas posibles:

A phase-1 setting that allows the use of symmetric encryption.
A phase-2 setting that allows the recalculation of a new common secret key each time the session
key expires.
A 'key-agreement' protocol.
A 'security-association-agreement' protocol.

Explicación

Pregunta 98 de 110

1

Which web filtering inspection mode inspects DNS traffic?

Selecciona una de las siguientes respuestas posibles:

DNS-based
FQDN-based
Flow-based
URL-based

Explicación

Pregunta 99 de 110

1

A FortiGate administrator with the super_admin profile configures a virtual domain (VDOM) for a new customer. After creating the VDOM, the administrator is unable to reassign the dmz interface to the new VDOM as the option is greyed out in the GUI in the management VDOM.
What would be a possible cause for this problem?

Selecciona una de las siguientes respuestas posibles:

The administrator does not have the proper permissions to reassign the dmz interface.
The dmz interface is referenced in the configuration of another VDOM.
Non-management VDOMs cannot reference physical interfaces.
The dmz interface is in PPPoE or DHCP mode.

Explicación

Pregunta 100 de 110

1

What methods can be used to deliver the token code to a user that is configured to use two factor authentication? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Browser pop-up window.
FortiToken.
Email.
Code books.
SMS phone message

Explicación

Pregunta 101 de 110

1

Which IP packets can be hardware-accelerated by a NP6 processor? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Fragmented packet.
Multicast packet.
SCTP packet
GRE packet

Explicación

Pregunta 102 de 110

1

When does a FortiGate load-share traffic between two static routes to the same destination subnet?

Selecciona una de las siguientes respuestas posibles:

When they have the same cost and distance.
When they have the same distance and the same weight.
When they have the same distance and different priority.
When they have the same distance and same priority.

Explicación

Pregunta 103 de 110

1

Which statements are true about offloading antivirus inspection to a Security Processor (SP)? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Both proxy-based and flow-based inspection are supported.
A replacement message cannot be presented to users when a virus has been detected.
It saves CPU resources.
The ingress and egress interfaces can be in different SPs

Explicación

Pregunta 104 de 110

1

Examine the exhibit; then answer the question below.
Which statement describes the green status indicators that appear next to the different FortiGuard Distribution Network services as illustrated in the exhibit?

Selecciona una de las siguientes respuestas posibles:

They indicate that the FortiGate has the latest updates available from the FortiGuard Distribution
Network.
They indicate that updates are available and should be downloaded from the FortiGuard
Distribution Network to the FortiGate unit
They indicate that the FortiGate is in the process of downloading updates from the FortiGuard
Distribution Network.
They indicate that the FortiGate is able to connect to the FortiGuard Distribution Network.

Explicación

Pregunta 105 de 110

1

Which statement is one disadvantage of using FSSO NetAPI polling mode over FSSO Security Event Log (WinSecLog) polling mode?

Selecciona una de las siguientes respuestas posibles:

It requires a DC agent installed in some of the Windows DC
It runs slower.
It might miss some logon events
It requires access to a DNS server for workstation name resolution.

Explicación

Pregunta 106 de 110

1

A FortiGate unit is configured with three Virtual Domains (VDOMs) as illustrated in the exhibit.
Which of the following statements are true if the network administrator wants to route traffic between all the VDOMs? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

The administrator can configure inter-VDOM links to avoid using external interfaces and routers.
As with all FortiGate unit interfaces, firewall policies must be in place for traffic to be allowed to
pass through any interface, including inter-VDOM links.
This configuration requires a router to be positioned between the FortiGate unit and the Internet
for proper routing.
Inter-VDOM routing is automatically provided if all the subnets that need to be routed are locally
attached.
As each VDOM has an independent routing table, routing rules need to be set (for example, static
routing, OSPF) in each VDOM to route traffic between VDOMs.

Explicación

Pregunta 107 de 110

1

An administrator has configured a route-based site-to-site IPsec VPN.
Which statement is correct regarding this IPsec VPN configuration?

Selecciona una de las siguientes respuestas posibles:

The IPsec firewall policies must be placed at the top of the list
This VPN cannot be used as part of a hub and spoke topology.
Routes are automatically created based on the quick mode selectors.
A virtual IPsec interface is automatically created after the Phase 1 configuration is completed.

Explicación

Pregunta 108 de 110

1

Which two statements are true about IPsec VPNs and SSL VPNs? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

SSL VPN creates a HTTPS connection. IPsec does not.
Both SSL VPNs and IPsec VPNs are standard protocols.
Either a SSL VPN or an IPsec VPN can be established between two FortiGate devices.
Either a SSL VPN or an IPsec VPN can be established between an end-user workstation and a
FortiGate device.

Explicación

Pregunta 109 de 110

1

Examine the following spanning tree configuration on a FortiGate in transparent mode:
config system interface
edit <interface name>
set stp-forward enable
end

Selecciona una de las siguientes respuestas posibles:

The FortiGate participates in spanning tree.
The FortiGate device forwards received spanning tree messages.
Ethernet layer-2 loops are likely to occur.
The FortiGate generates spanning tree BPDU frames.

Explicación

Pregunta 110 de 110

1

Two FortiGate devices fail to form an HA cluster, the device hostnames are STUDENT and
REMOTE. Exhibit A shows the command output of show system ha for the STUDENT device. Exhibit B
shows the command output of show system ha for the REMOTE device.

Which one of the following is the most likely reason that the cluster fails to form?

Selecciona una de las siguientes respuestas posibles:

Password
HA mode
Hearbeat
Override

	Creado por rhughes07 hace alrededor de 9 años

Test sobre NSE 4, creado por rhughes07 el 15/09/2015.

Pregunta 1 de 110

Which of the following regular expression patterns make the terms "confidential data" case insensitive?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 2 de 110

Which statements are correct regarding virtual domains (VDOMs)? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 110

Which statements are true regarding IPv6 anycast addresses? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 110

In HA, the option Reserve Management Port for Cluster Member is selected as shown in the exhibit below. Which statements are correct regarding this setting? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 110

Which tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 110

Which statements are true regarding traffic shaping that is applied in an application sensor, and associated with a firewall policy? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 110

The FortiGate port1 is connected to the Internet. The FortiGate port2 is connected to the internal network. Examine the firewall configuration shown in the exhibit; then answer the question below. Based on the firewall configuration illustrated in the exhibit, which statement is correct?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 110

Review the IPsec phase 2 configuration shown in the exhibit; then answer the question below. Which statements are correct regarding this configuration? (Choose two.).

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 110

Which of the following statements are correct about the HA command diagnose sys ha resetuptime? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 110

When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 110

Which two web filtering inspection modes inspect the full URL? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 110

Which statement correctly describes the output of the command diagnose ips anomaly list?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 110

Review the IPsec diagnostics output of the command diagnose vpn tunnel list shown in the exhibit. Which statements is correct regarding this output? (Select one answer).

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 14 de 110

Which statement describes what the CLI command diagnose debug authd fsso list is used for?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 15 de 110

Which statements are correct properties of a partial mesh VPN deployment. (Choose two.

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 16 de 110

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 17 de 110

Which statements are correct regarding application control? (Choose two.).

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 18 de 110

Which statement regarding the firewall policy authentication timeout is true?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 19 de 110

An administrator wants to create an IPsec VPN tunnel between two FortiGate devices. Which three configuration steps must be performed on both units to support this scenario? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 20 de 110

Which statements are correct regarding an IPv6 over IPv4 IPsec configuration? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Which of the following regular expression patterns make the terms "confidential data" case
insensitive?

In HA, the option Reserve Management Port for Cluster Member is selected as shown in the
exhibit below.

Which statements are correct regarding this setting? (Choose two.)

Which tasks fall under the responsibility of the SSL proxy in a typical HTTPS connection?
(Choose two.)

Which statements are true regarding traffic shaping that is applied in an application sensor, and
associated with a firewall policy? (Choose two.)

The FortiGate port1 is connected to the Internet. The FortiGate port2 is connected to the internal network. Examine the firewall configuration shown in the exhibit; then answer the question below.

Based on the firewall configuration illustrated in the exhibit, which statement is correct?

Review the IPsec phase 2 configuration shown in the exhibit; then answer the question below.

Which statements are correct regarding this configuration? (Choose two.).

Which of the following statements are correct about the HA command diagnose sys ha resetuptime?
(Choose two.)

When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP
address is used as the source of the HTTP request?

Review the IPsec diagnostics output of the command diagnose vpn tunnel list shown in the exhibit.

Which statements is correct regarding this output? (Select one answer).

An administrator wants to create an IPsec VPN tunnel between two FortiGate devices.
Which three configuration steps must be performed on both units to support this scenario? (Choose
three.)

Which network protocols are supported for administrative access to a FortiGate unit? (Choose
three.)

A user logs into a SSL VPN portal and activates the tunnel mode. The administrator has enabled split tunneling. The exhibit shows the firewall policy configuration:
Which static route is automatically added to the client's routing table when the tunnel mode is activated?

Review the static route configuration for IPsec shown in the exhibit; then answer the question below.
Which statements are correct regarding this configuration? (Choose two.)

Two FortiGate units with NP6 processors form an active-active cluster. The cluster is doing
security profile (UTM) inspection over all the user traffic. What statements are true regarding the
sessions that the master unit is offloading to the slave unit for inspection? (Choose two.)

The order of the firewall policies is important. Policies can be re-ordered from either the GUI or the CLI.
Which CLI command is used to perform this function?