d.syla
Test por , creado hace más de 1 año

Cisco 500-007 Part 1

62
0
0
d.syla
Creado por d.syla hace casi 9 años
Cerrar

Cisco 500-007

Pregunta 1 de 64

1

You have configured your Cisco TelePresence Codec C90 but discover unwated noise during use. What best practice will help avoid this problem.

Selecciona una de las siguientes respuestas posibles:

  • Connect only one device at a time ot an input and avoid daisy -chaining

  • Recycle the power on your system after adding each additional input

  • If you are not using an input, turn it off.

  • Daisy-chain additional devices using a serial cable to provide separate power supplies

Explicación

Pregunta 2 de 64

1

Which two letters represent input connections on the Cisco Telepresence codec c90

Selecciona una o más de las siguientes respuestas posibles:

  • A

  • B

  • C

  • D

Explicación

Pregunta 3 de 64

1

You want to reconfigure the H.323 and Sip settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this?

Selecciona una de las siguientes respuestas posibles:

  • Audio input levels

  • IP Settings

  • Advanced Configuration

  • protocol configuration

Explicación

Pregunta 4 de 64

1

What do you need to do before an endpoint can place or receive H.323 calls using a URL address

Selecciona una de las siguientes respuestas posibles:

  • Register the endpoint to the SIP server

  • Register the endpoints to the gatekeeper

  • Register the endpoint to the gatway

  • Register the endpoint to the Cisco TelePresence MCU

Explicación

Pregunta 5 de 64

1

You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use.

Selecciona una de las siguientes respuestas posibles:

  • A or B

  • A or D

  • A or E

  • B or C

  • D or E

Explicación

Pregunta 6 de 64

1

While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint?

Selecciona una de las siguientes respuestas posibles:

  • Press the home button to return to the menu, and select the add participant button

  • Press and hold the End Call key to bring up the dialing menu.

  • Press and hold the Call key to bring up the dialing menu

  • Press the Call key, and choose or dail the number of the additional participant

Explicación

Pregunta 7 de 64

1

Which three are true statements regarding the Cisco TelePresence endpoint product set? (Choose 3)

Selecciona una o más de las siguientes respuestas posibles:

  • The MX200 and MX300 are all-inclusive systems and do not require additional AV components

  • The MX200 and MX300 are integrator codec systems and require additional AV components

  • The EX60 and EX90 are room-based TelePresence systems intended for use in board rooms

  • The C90 is a high end integrator codec

  • The EX90 is an integrator codec

  • The C40 is a basic integrator codec supporting dual monitors

Explicación

Pregunta 8 de 64

1

What are the two methods for pairing an 8-inch Cisco Telepresence touch panel to a Codec C90? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • Plug the cable that is attached to the Touch panel directly into the back of the Codec C90

  • Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90

  • Plug the provided Ethernet cable from the Touch panel power supply into the Lan and pair over the network.

  • Use the built-in wireless on the Touch panel to pair over the network

Explicación

Pregunta 9 de 64

1

Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series or SX20 device?

Selecciona una de las siguientes respuestas posibles:

  • The device ships from factory with the admin account enabled, with no password

  • The device ships from factory with the admin account enabled, with a default password of Cisco.

  • The device ships from factoractory with admin account enabled, with a default password of tandberg

  • The devices ships from factory with the root account enabled, with no password

Explicación

Pregunta 10 de 64

1

When configuring a Cisco TelePresence EX, MX, or C Series devices, which two statements are true? (Chose two)

Selecciona una o más de las siguientes respuestas posibles:

  • The unit can be completely configured from the web interface.

  • If available, the TRC5 remote control can be used to completely configure the unit

  • The API must be used in order to configure the unit

  • The Touch panel can be used to completely configure the unit.

Explicación

Pregunta 11 de 64

1

If the user purchases the Cisco TelePresence touch panel, which two statements are true? (Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • Both the TRC5 remote and the Touch panel can be used simultaneously.

  • Either the TRC5 remote control or the Touch panel can be used, but not both simultaneously

  • The Touch panel should be used to make calls, but the TRC5 remote control should be used to configure the unit.

  • The web interface can be used to configure the unit

Explicación

Pregunta 12 de 64

1

If you do not have the Premium Resolution option installed on a Cisco TelePresence endpoint, what is the maximum resolution that you can transmit and receive?

Selecciona una o más de las siguientes respuestas posibles:

  • 1080p30

  • 720p60

  • 720p30

  • Standard definition resolutions only

Explicación

Pregunta 13 de 64

1

When using the Cisco TelePresence Touch panel with a Codec C90, which administrator setting can you access?

Selecciona una o más de las siguientes respuestas posibles:

  • all of the same administrator settings as when using the TRC5 remote.

  • a limited subset of the administrator settings compared with using the TRC5 remote

  • none of the Administrator settings

  • only the custom video layout settings

Explicación

Pregunta 14 de 64

1

What can you see on the Status > Registrations > by device page?

Selecciona una o más de las siguientes respuestas posibles:

  • currently registered SIP and H.323 devices

  • all devices that were registered for SIP or H.323 since the last reboot

  • currently registered H.323 devices only

  • Currently registered SIP devices only

Explicación

Pregunta 15 de 64

1

Which two settings can be configured using the serial connection when you are running the TelePresence VCS install wizard? (Choose 2)

Selecciona una o más de las siguientes respuestas posibles:

  • Device name

  • device ID number

  • IP address

  • password

  • default video codec

Explicación

Pregunta 16 de 64

1

Which feature or features will work on a new Cisco telePresence VCS as soon as the ip configuration is done.

Selecciona una de las siguientes respuestas posibles:

  • H.323

  • H.323 and SIP

  • H323, SIP, and interworking

  • H.323, SIP, Interworking, and firewall traversal

Explicación

Pregunta 17 de 64

1

Which of these options shows the methods that are available to configure a Cisco VCS appliance at initial installation

Selecciona una de las siguientes respuestas posibles:

  • CLI over serial port, web interface keyboard and monitor

  • CLI over serial port, web interface, LCD panel

  • CLI over serial port, web interface, boot disk

  • Using the Cissco Prime Collaboration Manager, after running System Discovery, to discovery the newly added Cisco VCS

Explicación

Pregunta 18 de 64

1

The Cisco VCS Starter Pack Express supports which two features that are not found in a Cisco VCS Control? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • jabber for Ipad support

  • Expressway server

  • local device authentication

  • built-in provision

Explicación

Pregunta 19 de 64

1

In the SIP configuration, which two items need to match in the Cisco TelePresence VCS configuration and the endpoint configuration? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • Service Prefix

  • Cisco VCS IP address

  • DNS Server

  • SIP domain

Explicación

Pregunta 20 de 64

1

Which two inter-working functions are supported on the Cisco VCS (Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • SIP-to-H.323

  • IPv4-to-IPv6

  • H.323-to-H.320

  • firewall traversal

Explicación

Pregunta 21 de 64

1

Which statement is true when the H.323 and SIP inter working is set to on in the Cisco TelePresence VCS?

Selecciona una de las siguientes respuestas posibles:

  • The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the end points is locally registered.

  • The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway only if one of the endpoints is locally registered.

  • The Cisco TelePresence VCS will not act as a SIP-to-H.323 gateway.

  • The Cisco TelePresence VCS will permit all traffic from any H.323 or SIP endpoint that is registered locally

Explicación

Pregunta 22 de 64

1

Which type of account needs to be set up to create a Csico TelePresence soft client (such as Cisco Jabber or Movi)user if you are using the Cisco TelePresence VCS Expressway Starter Pack?

Selecciona una de las siguientes respuestas posibles:

  • a local FindMe account on the Cisco VCS

  • a local admin account on the Cisco VCS

  • an LDAP user account on Active Directory

  • an LDAP FindMe account on Active Directory

Explicación

Pregunta 23 de 64

1

Which of these must be enabled to set up a Cisco TelePresence soft client (such Cisco Jabber or Movi) on a Cisco TelePresence VCS Expressway Starter Pack?

Selecciona una de las siguientes respuestas posibles:

  • SIP

  • H.323

  • Interworking

  • Multiway

Explicación

Pregunta 24 de 64

1

Which two of these are required for restoring a backup to another Cisco VCS? (Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • The same version of software of as the original Cisco VCS

  • the same basic IP address settings

  • an empty configuration on the Cisco vcs

  • the same option keys

Explicación

Pregunta 25 de 64

1

How are firewall traversal connections established between the Cisco TelePresence VCS expressway and Control?

Selecciona una de las siguientes respuestas posibles:

  • The traversal client establishes connections outbound to the traversal server

  • The traversal server establishes connections inbound to the traversal client

  • Connections are established in both directions from the traversal server to the traversal client

  • The traversal server nogotiaties acceptable connection prots with the firewall

Explicación

Pregunta 26 de 64

1

Which command is used to set the IP configuration for a Cisco TelePresence MCU 5300

Selecciona una o más de las siguientes respuestas posibles:

  • Status IP address netmask default GW

  • xconfigure IP addresss netmask default GW

  • static A IP address netmask default GW

  • set IP address netmask default GW DNS server address

Explicación

Pregunta 27 de 64

1

If the zone is a VCS firewall traversal solution are established, what else is needed before connections can be established in both directions?

Selecciona una de las siguientes respuestas posibles:

  • A call policy must be established

  • VCS serach rules must be created for each zone

  • The VCS control and the VCS expressway must be neightbored

  • Transforms must be created in the VCS traversal server zone

Explicación

Pregunta 28 de 64

1

What does an endpoint sysrtem user to navigate the Auto Attendant menu on the Cisco TelePresence MCU?

Selecciona una de las siguientes respuestas posibles:

  • FECC or DTMF navigation

  • a special remote that came with the Cisco TelePresence MCU

  • Only FECC; DTMF is not supported

  • web interafce of the endpoint

Explicación

Pregunta 29 de 64

1

If an auto attendant has a numeric id of 543 and the Cisco TelePresence MCU has a prefix of 62 and a domain of cisco.demo, which two of these will be registered on the Cisco TelePresence VCS, assuming that SIP and H.323 registration have been selected? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • 62543

  • 543@cisco.demo

  • 543

  • 62543@cisco.demo

  • 543@62.cisco.demo

Explicación

Pregunta 30 de 64

1

How can you register a prefix to route all SIP calls beginning with that prefix to the Cisco TelePresence MCU?

Selecciona una o más de las siguientes respuestas posibles:

  • You cannot; all SIP addresses must be registered individually

  • The H.323 prefix is automatically used

  • You cannot; you need to use a suffix in the form of a domain.

  • The username is used as the suffix

Explicación

Pregunta 31 de 64

1

What does the Cisco Telepresence MCU service prefix do?

Selecciona una de las siguientes respuestas posibles:

  • Ensures that all H.323 calls beginning with perfix are routed to the Cisco TelePresence MCU

  • is added to all aliases before registration

  • diverts calls to the default auto attendant

  • identifies which serves the Cisco TelePresence MCU will offer in each configured meeting room

Explicación

Pregunta 32 de 64

1

How does an administrator move an endpoint efficiently from one conference to another Cisco TelePresence MCU ?

Selecciona una o más de las siguientes respuestas posibles:

  • From the Move Participants screen, right-click the participant and select the new conference from the drop-down list

  • From the Move Participants screen, drag and drop a participant from once conference to another

  • From the Conference menu, select the participant, and then select the new conference

  • From the web interace, disconnect the participant, and then reconnect to the new conference.

Explicación

Pregunta 33 de 64

1

By which two ways can an endpoint join a conference on the Cisco TelePresence MCU ? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • dialing a registered alias for the conference

  • dialing the auto attendant and navigating to the conference

  • dialing an endpoint that is already in the conference

  • dialing all endpoints that are required in the conference

  • dialing the PIn number of the conference

Explicación

Pregunta 34 de 64

1

What effect does the 'Prefix for MCU Registration' have on Cisco TelePresence MCU registration?

Selecciona una o más de las siguientes respuestas posibles:

  • The prefix replaces the domain if the prefix is dialed

  • The prefix is placed in front of all SIP URI's

  • Anything that is dialed with the perfix will be routed to the Cisco TelePresence MCU

  • The prefix is placed in front of all E.164 aliases

Explicación

Pregunta 35 de 64

1

What is the maximum port capacity of the 5320 MCU?

Selecciona una de las siguientes respuestas posibles:

  • 5HD+ OR 10HD OR 20SD OR 24nhd

  • 1HD+ or 2HD or 4SD or 8nHD

  • 10HD+ or 20HD or 40SD or 48nHD

  • 20HD+ or 40HD or 80SD or 96nHD

Explicación

Pregunta 36 de 64

1

How many rack units does a Cisco TelePresence MCU 5300 occupy in a standard data center

Selecciona una de las siguientes respuestas posibles:

  • 1

  • 2

  • 3

  • 4

Explicación

Pregunta 37 de 64

1

Using the web interface, where can you verify the licensing on a Cisco TelePresence MCU 5300?

Selecciona una de las siguientes respuestas posibles:

  • Settings > Upgrade

  • Settings > Conference

  • Settings > Content

  • Status > Help

Explicación

Pregunta 38 de 64

1

How many endpoints can register to the built-in H.323 gatekeeper of a Cisco TelePresence MCU 5300 series device.

Selecciona una de las siguientes respuestas posibles:

  • none; there is no built-in gatekeeper

  • 25

  • 100

  • 300

Explicación

Pregunta 39 de 64

1

How should you configure the IP address and default gateway on a Cisco TelePresence MCU 53000 Series device during setup

Selecciona una o más de las siguientes respuestas posibles:

  • Conenct an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2

  • Console into the serial port in the front panel, and use the static command

  • Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway

  • change it from the Cisco VCS

Explicación

Pregunta 40 de 64

1

How do you upgrade the software of an exisiting installtion with a Cisco TelePresence MCU 5300?

Selecciona una o más de las siguientes respuestas posibles:

  • Download the new software, navigate to Maintenance > Upgrade Software, and upload the software

  • Use FTP to access the MCU, browse to the etc/software/upgrade directory, put the new load in and reboot the MCU

  • Navigate to Settings > Upgrade, then follow instructions under Main Software Image.

  • Use an SFTP client to log into the MCU, and place the software in the etc/software/upgrade directory

Explicación

Pregunta 41 de 64

1

How to you obtain a SIP log from the Cisco TelePresence MCU 5300 to send to Cisco TAC for futher analysis?

Selecciona una o más de las siguientes respuestas posibles:

  • Navigate to Maintenance > Logs, and the download the log

  • Navigate to Logs > Event Log > SIP Details, and the download the log

  • Navigate to Logs > H.323/SIP Log, click Enable H.323/SIP Logging, and then download the log.

  • Use FTP to access the MCU, go to the directory /etc/logs/sip, and get all of the files in the directory.

Explicación

Pregunta 42 de 64

1

What is one way that a conference participants screen layout be changed without affecting other participants

Selecciona una o más de las siguientes respuestas posibles:

  • Via the participant settings in the MCU 5300 web interface

  • via the conference settings in the MCU 5300 web interface

  • by the nominated chair endpoint using FECC

  • by moving the participant into a different meeting using the MCU 5300 web interface

Explicación

Pregunta 43 de 64

1

What are two ways that a conference participant can be disconnected from a conference? (Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • by using the MCU 5300 web interface

  • will be automatically disconnected at the end of the allotted time

  • by the auto attendant

  • will be disconnected when the conference exceeds its maximum capacity.

Explicación

Pregunta 44 de 64

1

Before you upgrade your Cisco TelePresence Management Suite, what should you do with your SQL database?

Selecciona una de las siguientes respuestas posibles:

  • Save a backup

  • Restore a previous version

  • Set a new username and password

  • Create a second copy

Explicación

Pregunta 45 de 64

1

Which installation option should you choose if you wish to use an external SQL database?

Selecciona una de las siguientes respuestas posibles:

  • Complete

  • Custom

  • Advanced

  • Basic

Explicación

Pregunta 46 de 64

1

If you do not have a valid release key, what restrictions will be applied?

Selecciona una de las siguientes respuestas posibles:

  • The Cisco TelePresence Management Suite will only manage three systems

  • Installation will fail and the Cisco TelePresence Management Suite will not be installed

  • The Cisco TelePresence Management Suite will only operate for 30 days

  • The SQL database will be purged every 30 days.

Explicación

Pregunta 47 de 64

1

Where would you enter release and option keys into the Cisco TelePresence Management Suite

Selecciona una de las siguientes respuestas posibles:

  • in Configuration>General Settings

  • On the portal page

  • through the release key generator in a terminal session on the server

  • on the Cisco TelePresence Manager Suite server maintenance page

Explicación

Pregunta 48 de 64

1

When a new conference is booked on the Cisco TelePresence Management Suite, which setting instructs the endpoint or Cisco TelePresence MCU to call a participant at the time of a conference

Selecciona una de las siguientes respuestas posibles:

  • Manual

  • Call-in Only

  • Reverse Call

  • Automatic

Explicación

Pregunta 49 de 64

1

By which three ways can systems be added in the Cisco TelePresence Management Suite? (Choose three)

Selecciona una o más de las siguientes respuestas posibles:

  • by preregistering systems

  • from a .csv file

  • by importing from a Cisco TelePresence VCS

  • by user-configured name

  • by dialing an endpoint

  • by IP address.

  • from a list of previously discovered systems

Explicación

Pregunta 50 de 64

1

You want to obtain specific configuration details from each of the systems that are regisitered to your Cisco TelePresence Management Suite. Where can you do this ?

Selecciona una o más de las siguientes respuestas posibles:

  • Choose Navigator from the Systems menu

  • Choose System Overview from the System menu

  • Run System tracking from the systems menu

  • Connect to the Cisco TelePresence Management Suite via a console connection and use show commands

Explicación

Pregunta 51 de 64

1

After you create a phone book in the Cisco TelePresence Management Suite, which method should you use to populate it with entries

Selecciona una de las siguientes respuestas posibles:

  • Connect the phone book to a phone book source

  • Manually type entries into the phone book.

  • Connect the phone book to a gatekeeper

  • Upload a file in .mdf format

Explicación

Pregunta 52 de 64

1

The Cisco TCS provides which two functions ? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • records and standards-based video conferencing session

  • records video from IP-based encoders

  • can stream out live TelePresence sessions over IP networks

  • allows users to upload video for conversion into H.264 or MP4

Explicación

Pregunta 53 de 64

1

Which two statements about the Cisco TCS are correct? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • It contains an internal gatekeeper

  • it allows creators to edit videos

  • it runs on the window operating system

  • it runs on the linux operating systems

Explicación

Pregunta 54 de 64

1

What are two ways to set the IP netowrk information on the CIsco TCS? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • DHCP

  • statically set on its windows operating system

  • statically set on its linux operating system

  • automatically assigned by the cisco telepresence managment server

Explicación

Pregunta 55 de 64

1

What is the effect of registering the Cisco TCS with the Cisco VCs using H.323 gateway mode?

Selecciona una de las siguientes respuestas posibles:

  • The Cisco TCS does not support this type of registration.

  • An unlimited number of recording aliases can be assigned

  • The cisco tcs is prevent from making an outbound call to a Cisco MCU

  • The Cisco TCS can reaverse calls between SIP and H.323

Explicación

Pregunta 56 de 64

1

Which two statments about Cisco TCS recording aliases are true? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • System recording aliases can only be dialed by the site manager (administrator)

  • Any recording alias can be triggered by dialing its assigned URI or E.164 number

  • Recordings resulting from a personal recording alias can only be managed by their creator.

  • final recordings made from a recording alias cannot be modified

Explicación

Pregunta 57 de 64

1

Which of these constitutes a Cisco TCS recording alias?

Selecciona una de las siguientes respuestas posibles:

  • A recording template, a media server configuration, and a call configuration.

  • a media server configuration and a call configuration

  • a recording template and a media server configuration

  • a recording template and a call configuration

Explicación

Pregunta 58 de 64

1

Which two statements about Cisco TCS users are true? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • Users with the creator role can create their won recording aliases

  • Local users have only limited Cisco TCS permissions

  • Users can be assigned to the Cisco TCS through an Active Directory LDAP server

  • User permissions are based on one of three assignable roles

Explicación

Pregunta 59 de 64

1

Which two statements about Cisco TCS recording templates are true? (Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • Every recording alias contains one recording template

  • They provide a way to produce recordings without a recording alias

  • They must always contain a media server configuration

  • There can only be one system recording template

Explicación

Pregunta 60 de 64

1

Which statement about playing back Cisco TCS recording is true ?

Selecciona una o más de las siguientes respuestas posibles:

  • It is not possible to play back Cisco TCS recordings from a video enpoint

  • The Cisco TCS must register to the Cisco VCS as an H.323 gateway in order to play back recordings on video endpoints

  • The Cisco TCS will automatically assign an E.164 playback number to recordings if it is registered as an H.323 terminal

  • The Cisco TCS must register to the Cisco VCS using SIP in order to play back on any video endpoint

Explicación

Pregunta 61 de 64

1

In which two locations can Cisco TCS recordings be view? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • directly on the cisco TCS web portal

  • in the Cisco TelePresence Managements server

  • on a video endpoint

  • on the Codec C90 touch panel

Explicación

Pregunta 62 de 64

1

Which two pieces of troubleshooting information does the Cisco TCS provide? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • log messages that can be accessed by the site manager through the CLI

  • recording alias processing progress

  • error logs that only Cisco TAC can access

  • log messages that can be accessed by the site manager through the web interface

Explicación

Pregunta 63 de 64

1

Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the cisco TCS web interface? ( Choose Two)

Selecciona una o más de las siguientes respuestas posibles:

  • option key information

  • recording port activity status

  • Cisco VCS registration status

  • which cisco tms is managing the TCS

Explicación

Pregunta 64 de 64

1

Cisco TCS recordings can be encoded into which two video formats? ( Choose two)

Selecciona una o más de las siguientes respuestas posibles:

  • MPEG-4 for flash and QuickTime

  • WMV

  • H.262

  • Sorensen VP8 for flash

Explicación

Anterior
Revisar respuesta
Siguiente