Ali Sahar
Test por , creado hace más de 1 año

CH4

203
0
0
Ali Sahar
Creado por Ali Sahar hace alrededor de 9 años
Cerrar

CCNP CH4

Pregunta 1 de 9

1

What is the final step when configuring policy-based routing?

Selecciona una de las siguientes respuestas posibles:

  • Define access lists.

  • Configure policy with the use of the route-map command.

  • Apply policy to an interface using ip policy route-map command.

  • Apply match commands.

Explicación

Pregunta 2 de 9

1

Which prefix-list entry will be used when multiple entries in a prefix list match a given prefix?

Selecciona una de las siguientes respuestas posibles:

  • all matching entries

  • entry with the lowest sequence number

  • entry with the largest sequence number

  • entry with the longest prefix mask length

Explicación

Pregunta 3 de 9

1

Which method of redistribution is least likely to introduce a routing loop into a network?

Selecciona una de las siguientes respuestas posibles:

  • one-way

  • two-way

  • one-point

  • multipoint

Explicación

Pregunta 4 de 9

1

Which command would allow advertising only an aggregate address of 192.168.0.0/16 when applied by using a neighbor statement that contains prefix-list [prefix-list name] out?

Selecciona una de las siguientes respuestas posibles:

  • permit 192.168.0.0/0 le 16

  • permit 192.168.0.0/16

  • permit 192.168.0.0/16 ge 16

  • permit 192.168.0.0/16 eq 16

Explicación

Pregunta 5 de 9

1

Which is the default seed metric for an OSPF route that is redistributed into an EIGRP autonomous system?

Selecciona una de las siguientes respuestas posibles:

  • infinity

  • 1

  • 20

  • 90

  • 110

  • 170

Explicación

Pregunta 6 de 9

1

Which command would deploy a prefix list in a BGP environment?

Selecciona una de las siguientes respuestas posibles:

  • ip prefix-list distribute

  • ip bgp prefix-list distribute

  • neighbor [ip address] prefix-list prefix-list-name [in/out]

  • neighbor [ip address] prefix-list-name [in/out]

Explicación

Pregunta 7 de 9

1

A router has learned the route 192.168.254.0 /24 from multiple sources.
These sources are as follows:

- RIPv1 route with a metric of 12
- EIGRP with a metric of 125689
- OSPF E2 route with a metric of 125
- EIGRP external route with a metric of 3489
- OSPF type 1 route with a metric of 632
- OSPF route with a metric of 4

What route will be injected into the routing table?

Selecciona una de las siguientes respuestas posibles:

  • D with metric of 125689

  • E1 with a metric of 632

  • E2 with a metric of 125

  • EX with a metric of 3489

  • O with a metric of 4

  • R with metric of 12

Explicación

Pregunta 8 de 9

1

Which criterion must be met before a route can be redistributed into another routing protocol?

Selecciona una de las siguientes respuestas posibles:

  • be directly connected

  • be learned through a dynamic routing protocol

  • exist in the routing table

  • be learned from a different routing protocol than the protocol into which it is redistributed

  • have an administrative distance that is greater than that of the routing protocol into which it is being
    redistributed

Explicación

Pregunta 9 de 9

1

Which statement best describes the route tag in a RIPv2 packet?

Selecciona una de las siguientes respuestas posibles:

  • The route tag contains a 32-bit mask that identifies the network and subnet portion of the IP address.

  • It contains the IP address of the next hop that is listed in the IP Address field.

  • It differentiates between a request for a full routing table or a partial routing update due to a topology

  • It indicates how many internetwork hops or routers have been traversed in the trip to the destination.

  • It differentiates between routes that are learned within the autonomous system and those that were redistributed into the routing process.

Explicación

Anterior
Siguiente