Simulado NSE 4 (7.2)

Por favor espera - en proceso…

Pregunta 1 de 64

An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway
What must the administrator do to achieve this objective?

Selecciona una de las siguientes respuestas posibles:

The administrator must use a FortiAuthenticator device
The administrator must use a third-party RADIUS OTP server
The administrator must use the user self-registration server
The administrator must register the same FortiToken on more than one FortiGate device

Explicación

Pregunta 2 de 64

What is a reason for triggering IPS fail open?

Selecciona una de las siguientes respuestas posibles:

The IPS socket buffer 1s full and the IPS engine cannot process additional packets.
The IPS engine cannot decode a packet.
The administrator enabled NTurbo acceleration
The IPS engine is upgraded.

Explicación

Pregunta 3 de 64

An organization requires remote users to send external application data running on their PCs and access FTP resources through an SSL/TLS connection

Which FortiGate configuration can achieve this goal?

Selecciona una de las siguientes respuestas posibles:

SSL VPN quick connection
SSL VPN bookmark
SSL VPN tunnel
Zero trust network access

Explicación

Pregunta 4 de 64

Refer to the exhibit
The exhibit shows the FortiGuard Category Based Filter section of a corporate web
filter profile
An administrator must block access to download.com, which belongs to the Freeware
and Software Downloads category The administrator must also allow other websites in
the same category
What are two solutions for satisfying the requirement? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Configure a separate firewall policy with action Deny and an FQDN address object for
*, download.com as destination address
Set the Freeware and Software Downloads category Action to Warning
Configure a static URL filter entry for download.com with Type and Action set to
Wildcard and Block, respectively
Configure a web override rating for downlead. com and select Malicious Websites
as the subcategory.

Explicación

Pregunta 5 de 64

What are two features of collector agent advanced mode? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Advanced mode supports nested or inherited groups
In advanced mode, FortiGate can be configured as an LDAP client and group filters can be configured on FortiGate
Advanced mode uses the Windows convention—NetBios: Domain\Username
In advanced mode, security profiles can be applied only to user groups, not individual users.

Explicación

Pregunta 6 de 64

Refer to the exhibits
Exhibit A shows a network diagram. Exhibit B
shows the firewall policy configuration and a VIP ”
object configuration
|
The WAN (port1) interface has the IP address
10.200.1.1/24
The LAN (port3) interface has the IP address
10.0.1.254/24. 10.200.1.1/24
The administrator disabled the WebServer firewall policy.
Which IP address will be used to source NAT the traffic, if a user with address 10.0.1.10 connects over SSH to the host with address 10.200.3.17

Selecciona una de las siguientes respuestas posibles:

10.200.3.1
10.200.1.10
10.200.1.1
10.0.1.254

Explicación

Pregunta 7 de 64

A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors.
What is the reason for the certificate warning errors?

Selecciona una de las siguientes respuestas posibles:

The certificate used by FortiGate for SSL inspection does not contain the required certificate extensions
The full SSL inspection feature does not have a valid license.
The matching firewall policy is set to proxy inspection mode
The browser does not trust the certificate used by FortiGate for SSL inspection

Explicación

Pregunta 8 de 64

Which three methods are used by the collector agent for AD polling? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

FortiGate polling
NetAPI
WinSeclLog
FSSO RESTAPI
WMl

Explicación

Pregunta 9 de 64

Refer to the exhibit
Based on the administrator profile settings. what permissions must the administrator set
torun the diagnose firewall auth list CLI command on FortiGate?

Selecciona una de las siguientes respuestas posibles:

Read/Write permission for Firewall
Custom permission for Network
CLI diagnostics commands permission
Read/Write permission for Log & Report

Explicación

Pregunta 10 de 64

Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Extended authentication (XAuth) to request the remote peer to provide a username and password
No certificate is required on the remote peer when you set the certificate signature as the authentication method
Extended authentication (XAuth) for faster authentication because fewer packets are exchanged
Pre-shared key and certificate signature as authentication methods

Explicación

Pregunta 11 de 64

What is the primary FortiGate election process when the HA override setting is disabled?

Selecciona una de las siguientes respuestas posibles:

Connected monitored ports > HA uptime > Priority > FortiGate serial number
Connected monitored ports > System uptime > Priority > FortiGate serial number
Connected monitored ports > Priority > System uptime > FortiGate serial number
Connected monitored ports > Priority > HA uptime > FortiGate serial number

Explicación

Pregunta 12 de 64

Refer to the exhibit, which contains a static route configuration
An administrator created a static route for Amazon Web Services.
Which CLI command must the administrator use to view the route?

Selecciona una de las siguientes respuestas posibles:

get internet-service route list
get router info routing-table database
get router info routing-table all
diagnose firewall proute list

Explicación

Pregunta 13 de 64

Refer to the exhibit
The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local
VDOMs are configured in transparent mode
The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users
to access the internet. The To_Internet VDOM is the only VDOM with internet access
and is directly connected to the ISP modem
What can you conclude about this configuration?

Selecciona una de las siguientes respuestas posibles:

default static route is not required on the To_lnternet VDOM to allow LAN users to
access the intemet.
Inter-VDOM links are required to allow traffic between the Local and Root VDOMs
Inter-VDOM links are not required between the Root and To_Internet VDOMs
because the Root VDOM is used only as a management VDOM
Inter-VDOM links are required to allow traffic between the Local and DMZ VDOMs

Explicación

Pregunta 14 de 64

How can you disable RPF checking?

Selecciona una de las siguientes respuestas posibles:

Unset fail-alert-interfaces on the interface level settings
Disable src-check on the interface level settings
Disable strict-sre-check under system settings
Disable fail-detect on the interface level settings

Explicación

Pregunta 15 de 64

You have enabled logging on a FortiGate device for event logs and all security logs, and you have set up logging to use the FortiGate local disk
What is the default behavior when the local disk is full?

Selecciona una de las siguientes respuestas posibles:

No new log is recorded until you manually clear logs from the local disk
Logs are overwritten and the only warning is issued when log disk use reaches the threshold of 95%
Logs are overwritten and the first warning is issued when log disk use reaches the threshold of 75%
No new log is recorded after the warning is issued when log disk use reaches the threshold of 95%

Explicación

Pregunta 16 de 64

Which timeout setting can be responsible for deleting SSL VPN associated sessions?

Selecciona una de las siguientes respuestas posibles:

SSLVPN dtls-helle-timeout
SSLVPN idle-timeocut
SSLVPN http-request-body-timecut
SSLVPN login-timsout

Explicación

Pregunta 17 de 64

An administrator wants to simplify remote access without asking users to provide user credentials
Which access control method provides this solution?

Selecciona una de las siguientes respuestas posibles:

L2TP
ZTNA IP/MAC filtering mode
SSL VPN
ZTNA access proxy

Explicación

Pregunta 18 de 64

Refer to the exhibits
The exhibits show a firewall policy (ExhibitA ) and an antivirus profile (Exhibit B)
Why is the user unable to receive a block replacement message when downloading an
infected file for the first time?

Selecciona una de las siguientes respuestas posibles:

The volume of traffic being inspected is too high for this model of FortiGate
The intrusion prevention security profile must be enabled when using flow-based
inspection mode.
Flow-based inspection is used, which resets the last packet to the user
The firewall policy performs a full content inspection on the file

Explicación

Pregunta 19 de 64

Refer to the exhibits
The exhibits contain a network interface configuration, firewall policies, and a CLI :
console configuration
How will the FortiGate device handle user authentication for traffic that arrives on the LAN interface?

Selecciona una de las siguientes respuestas posibles:

All users will be prompted for authentication; users from the sales group can
authenticate successfully with the correct credentials.
Authentication is enforced only at a policy level, all users will be prompted for
authentication.
If there is a fall-through policy in place, users will not be prompted for authentication.
All users will be prompted for authentication; users from the HR group can
authenticate successfully with the correct credentials

Explicación

Pregunta 20 de 64

Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

FortiGuard update servers
NGFW mode
System time
Operating mode

Explicación

Pregunta 21 de 64

Which three CLI commands can you use to troubleshoot Layer 3 issues, if the issue is in neither the physical layer nor the link layer? (Choose three)

Selecciona una o más de las siguientes respuestas posibles:

O diagnose sys top
Diagnose sniffer packet any
get system arp
execute ping
execute traceroute

Explicación

Pregunta 22 de 64

Refer to the exhibits
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in
the security fabric. After synchronization, this object is not available on the downstream & Qs
FortiGate (ISFW)
What must the administrator do to synchronize the address object?

Selecciona una de las siguientes respuestas posibles:

Change the csf setting on ISFW (downstream)to set authorization-request-type certificate
Change the csf setting on ISFW (downstream)to set configuraticn-sync
local
Change the csf setting on both devices to set downstream-access enable.
Change the csf setting on Local-FortiGate (root) to set fabric-object-unification default.

Explicación

Pregunta 23 de 64

Refer to the exhibit
The exhibit shows a diagram of a FortiGate device connected to the network and the
firewall policy and IP pool configuration on the FortiGate device
Which two actions does FortiGate take on internet traffic sourced from the subscribers?(Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

FortiGate allocates port blocks per user, based on the configured range of internal IP addresses
FortiGate allocates 128 port blocks per user
FortiGate generates a system event log for every port block allocation made per user.
FortiGate allocates port blocks on a first-come, first-served basis

Explicación

Pregunta 24 de 64

Refer to the exhibit
The exhibit shows a diagram of a FortiGate device connected to the network and the
firewall policy and IP pool configuration on the FortiGate device
Two PCs, PC1 and PC2, are connected behind FortiGate and can access the internet
successfully However, when the administrator adds a third PC to the network (PC3), the
PC cannot connect to the internet.
Based on the information shown in the exhibit, which three configuration changes should
the administrator make to fix the connectivity issue for PC3? (Choose three )

Selecciona una o más de las siguientes respuestas posibles:

Configure 192.2.0.12/24 as the secondary IP address on port1 .
In the IP pool configuration, set type to overload
Configure another firewall policy that matches only the address of PC3 as source, and then place the policy on top of the list
In the firewall policy disable ippool.
In the IP pool configuration, set endip to 192.2.0.12

Explicación

Pregunta 25 de 64

Which statement about the deployment of the Security Fabric in a multi-VDOM environment is true?

Selecciona una de las siguientes respuestas posibles:

Each VDOM in the environment can be part of a different Security Fabric.
Downstream devices can connect to the upstream device from any of their VDOMs
Security rating reports can be run individually for each configured VDOM
VDOMSs without ports with connected devices are not displayed in the topology.

Explicación

Pregunta 26 de 64

FortiGate is integrated with FortiAnalyzer and FortiManager
When a firewall policy is created, which attribute is added to the policy to improve functionality and to support recording logs to FortiAnalyzer or FortiManager?

Selecciona una de las siguientes respuestas posibles:

Log ID
Sequence ID
Universally Unique Identifier
Policy ID

Explicación

Pregunta 27 de 64

Refer to the exhibit
Based on the raw log, what can you
conclude from the output? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Log severity is set to error on
FortiGate
Traffic belongs to the root VDOM
This is a security log.
Traffic is blocked because Action is set
to DENY in the firewall policy.

Explicación

Pregunta 28 de 64

What are two functions of the ZTNA rule? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

It defines the access proxy.
It applies security profiles to protect traffic
It enforces access control
It redirects the client request to the access proxy.

Explicación

Pregunta 29 de 64

Refer to the exhibit
Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit
What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?

Selecciona una de las siguientes respuestas posibles:

Traffic matching the signature will be silently dropped and logged.
The signature setting includes a group of other signatures
Traffic matching the signature will be allowed and logged
The signature setting uses a custom rating threshold.

Explicación

Pregunta 30 de 64

Refer to the exhibit to view the firewall policy
Why would the firewall policy not block a well-known virus. for example eicar?

Selecciona una de las siguientes respuestas posibles:

The firewall policy is not configured in proxy-based inspection mode
The firewall policy does not apply deep content inspection
Web filter is not enabled on the firewall policy to complement the antivirus profile.
The action on the firewall policy is not set to deny

Explicación

Pregunta 31 de 64

Refer to the exhibits
Exhibit A shows a topology for a FortiGate HA cluster that performs proxy-based inspection on traffic. Exhibit B shows the HA configuration and the partial output of the get system ha status command.
Based on the exhibits, which two statements about the traffic passing through the cluster are true? (Choose two.

Selecciona una o más de las siguientes respuestas posibles:

For load balanced connections, the primary encapsulates TCP SYN packets before forwarding them to the secondary.
The traffic sourced from the client and destined to the
server is sent to FGT-1.
The cluster can load balance ICMP connections to the
secondary
For non-load balanced connections, packets forwarded by cluster to the server contain the virtual MAC address of port2 as source

Explicación

Pregunta 32 de 64

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

Selecciona una o más de las siguientes respuestas posibles:

It uses UDP 53
It uses DNS over HTTPS
It uses UDP 8888
It uses DNS over TLS

Explicación

Pregunta 33 de 64

If Internet Service is already selected as Destination in a firewall policy, which other configuration object can be selected for the Destination field of a firewall policy?

Selecciona una o más de las siguientes respuestas posibles:

User or User Group
FQDN address
No other object can be added
IP address

Explicación

Pregunta 34 de 64

Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

Selecciona una o más de las siguientes respuestas posibles:

The collector agent must search Windows application event logs.
NetAPI polling can increase bandwidth usage in large networks.
The NetSessionEnum function is used to track user logouts
The collector agent uses a Windows API to query DCs for user logins.

Explicación

Pregunta 35 de 64

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

Selecciona una o más de las siguientes respuestas posibles:

lt uses UDP 53
It uses DNS over HTTPS
It uses UDP 8888
It uses DNS over TLS

Explicación

Pregunta 36 de 64

What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel?

Selecciona una o más de las siguientes respuestas posibles:

FortiGate automatically negotiates a new security association after the existing security association expires
FortiGate automatically negotiates different encryption and authentication algorithms with the remote peer.
FortiGate automatically negotiates different local and remote addresses with the remote peer
FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec tunnel

Explicación

Pregunta 37 de 64

The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile
Which order must FortiGate use when the web filter profile has features such as safe search enabled?

Selecciona una o más de las siguientes respuestas posibles:

DNS-based web filter and proxy-based web filter
FortiGuard category filter and rating filter
Static domain filter, SSL inspection filter, and external connectors filters
Static URL filter, FortiGuard category filter, and advanced filters

Explicación

Pregunta 38 de 64

The IPS engine is used by which three security features? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

DNS filter
Application control
Web filter in flow-based inspection
Web application firewall
Antivirus in flow-based inspection

Explicación

Pregunta 39 de 64

Refer to the exhibit showing a FortiGuard connection debug output
Based on the output, which two facts does the administrator know about the FortiGuard
connection? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

One server was contacted to retrieve the contract information
There is at least one server that lost packets consecutively.
FortiGate is using default FortiGuard communication settings
A local FortiManager is one of the servers FortiGate communicates with

Explicación

Pregunta 40 de 64

What are two benefits of flow-based inspection compared to proxy-based inspection? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

FortiGate allocates two sessions per connection
FortiGate uses fewer resources
FortiGate performs a more exhaustive inspection on traffic
FortiGate adds less latency to traffic.

Explicación

Pregunta 41 de 64

What is the imitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?

Selecciona una o más de las siguientes respuestas posibles:

It limits the scanning of application traffic to use parent signatures only
It limits the scanning of application traffic to the DNS protocol only
It limits the scanning of application traffic to the application category only
It limits the scanning of application traffic to the browser-based technology category only.

Explicación

Pregunta 42 de 64

What are two scanning techniques supported by FortiGate? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Trojan scan
Machine learning scan
Ransomware scan
Antivirus scan

Explicación

Pregunta 43 de 64

An employee needs to connect to the office through a high-latency internet connection
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

Selecciona una de las siguientes respuestas posibles:

udp-idle-timer
sessiocn=-ttl
idle-timeout
login-timeout

Explicación

Pregunta 44 de 64

Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

The subject alternative name (SAN) field in the server certificate
The server name indication (SNI) extension in the client hello message
The subject field in the server certificate
The serial number in the server certificate
The host field in the HTTP header

Explicación

Pregunta 45 de 64

Refer to the exhibits
Exhibit A shows a network diagram. Exhibit B shows the central SNAT policy and IP pool
configuration
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP 10.0.1.254/24.
A firewall policy is configured to allow all destinations from LAN (port3) to WAN (port1)
Central NAT is enabled, so NAT settings from matching central SNAT policies will be
applied.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on LocalClient (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?

Selecciona una de las siguientes respuestas posibles:

10.200.1.99
10.200.1.1
10.200.1.49
10.200.1.149

Explicación

Pregunta 46 de 64

Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate
devices The administrator has determined that phase 1 status is up, but phase 2 fails to
come up.
Based on the phase 2 configuration shown in the exhibit, which configuration change will
bring phase 2 up?

Selecciona una o más de las siguientes respuestas posibles:

On HQ-FortiGate, set Encryption to AES256.
On HQ-FortiGate, enable Auto-negotiate.
On Remote-FortiGate, set Seconds to 43200.
On HQ-FortiGate, enable Diffie-Hellman Group 2.

Explicación

Pregunta 47 de 64

Which two statements describe how the RPF check is used? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

The RPF check is run on the first reply packet of any new session.
The RPF check is run on the first sent packet of any new session
The RPF check is a mechanism that protects FortiGate and the network from IP spoofing attacks
The RPF check is run on the first sent and reply packet of any new session.

Explicación

Pregunta 48 de 64

n administrator needs to increase network bandwidth and provide redundancy.
Which interface type must the administrator select to bind multiple FortiGate interfaces?

Selecciona una o más de las siguientes respuestas posibles:

Software switch interface
VLAN interface
Aggregate interface
Redundant interface

Explicación

Pregunta 49 de 64

Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate
devices. The administrator has determined that phase 1 failed to come up. The administrator has also re-entered the pre-shared key on both FortiGate devices to make
sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two
configuration changes can the administrator make to bring phase 1 up? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

On HQ-FortiGate, set IKE mode to Main (ID protection).
On HQ-FortiGate, disable Diffie-Helman group 2.
On Remote-FortiGate, set port2 as Interface.
On both FortiGate devices, set Dead Peer Detection to On Demand. i)

Explicación

Pregunta 50 de 64

A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes
All traffic must be routed through the primary tunnel when both tunnels are up. The secondary tunnel must be used only if the primary tunnel goes down. In addition, FortiGate should be
able to detect a dead tunnel to speed up tunnel failover
Which two key configuration changes must the administrator make on FortiGate to meet the requirements? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Configure a lower distance on the static route for the primary tunnel. and a higher distance on the static route for the secondary tunnel
Configure a higher distance on the static route for the primary tunnel, and a lower distance on the static route for the secondary tunnel.
Enable Dead Peer Detection
Enable Auto-negotiate and Autokey Keep Alive on the phase 2 configuration of both tunnels

Explicación

Pregunta 51 de 64

Which inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)?

Selecciona una o más de las siguientes respuestas posibles:

Full content inspection
Certificate inspection
Flow-based inspection
Proxy-based inspection

Explicación

Pregunta 52 de 64

Refer to the exhibit
Why did FortiGate drop the packet?

Selecciona una o más de las siguientes respuestas posibles:

It matched an explicitly configured firewall policy with the action DENY
It matched the default implicit firewall policy.
It failed the RPF check
The next-hop IP address is unreachable

Explicación

Pregunta 53 de 64

Refer to the exhibit
Why did Fortigate drop the packet?

Selecciona una o más de las siguientes respuestas posibles:

It matched an explicity configured firewall policy with the action DENY
It matched the default
implicit firewall policy
It failed the RPF
check
The next-hop IP
address is
unreachable

Explicación

Pregunta 54 de 64

Which statement about video filtering on FortiGate is true?

Selecciona una o más de las siguientes respuestas posibles:

It does not require a separate FortiGuard license.
It is available only on a proxy-based firewall policy
Full SSL inspection is not required
Video filtering FortiGuard categories are based on web filter FortiGuard categories.

Explicación

Pregunta 55 de 64

An administrator configures outgoing interface any in a firewall policy
What is the result of the policy list view?

Selecciona una o más de las siguientes respuestas posibles:

Search option is disabled
Policy lookup is disabled
Interface Pair view is disabled.
By Sequence view is disabled

Explicación

Pregunta 56 de 64

What are two characteristics of FortiGate HA cluster virtual IP addresses? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

A change in the virtual IP address happens when a FortiGate device joins or leaves the cluster.
Heartbeat interfaces have virtual IP addresses that are manually assigned
The primary device in the cluster is alwa ed IP address 16%.254.0.1
Virtual IP addresses are used to distingui een cluster members

Explicación

Pregunta 57 de 64

Refer to the exhibits
The exhibits show a network diagram and firewall configurations
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
Remote-User1 must be able to access the Webserver. Remote-User2 must not be able fo access the Webserver.
In this scenario, which two changes can th ator make to deny Webserver access for Remote-User2? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Enable match-vip in the Deny policy
Set the Destination address as Webserver in the Deny policy.
Disable match-vip in the Deny policy
Set the Destination address as Deny_IP in the Allow_access policy

Explicación

Pregunta 58 de 64

Refer to the exhibits
The exhibits show a network diagram and firewall
configurations
An administrator created a Deny policy with
default settings to deny Webserver access for
Remote-User2
Remote-User1 must be able to access the
Webserver. Remote-User2 must not be able to
access the Webserver.
In this scenario, which two changes can the
administrator make to deny Webserver access for
Remote-User2? (Choose two )

Selecciona una o más de las siguientes respuestas posibles:

Enable match-vip in the Deny policy
Set the Destination address as Webserver in
the Deny policy
Disable match-vip in the Deny policy.
Set the destination address as DENY_IP in the Allow_access policy

Explicación

Pregunta 59 de 64

What are two features of the NGFW policy-based mode? (Choose two)

Selecciona una o más de las siguientes respuestas posibles:

NGFW policy-based mode policies support only flow inspection
NGFW policy-based mode supports creating applications and web filtering categories directly in a firewall policy
NGFW policy-based mode does not require the use of central source NAT policy
NGFW policy-based mode can only be applied globally and not on individual VDOMs

Explicación

Pregunta 60 de 64

Refer to the exhibits
Exhibit A shows a network diagram. Exhibit B shows the firewall policy configuration and a VIP object configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24
The LAN (port3) interface has the IP address 10.0.1.254/24
The administrator disabled the WebServer firewall policy.
Which IP address will be used to source NAT the traffic, if a user with address 10.0.1.10 connects over SSH to the host with address 10.200.3.1?

Selecciona una o más de las siguientes respuestas posibles:

10.200.1.10
10.0.1.254
10.200.1.1
10.200.3.1

Explicación

Pregunta 61 de 64

Refer to the exhibits
Exhibit A shows the application sensor configuration. Exhibit B shows the Excessive Bandwidth and Apple filter details
Based on the configuration, what will happen to Apple FaceTime if there are only a few
calls originating or incoming?

Selecciona una de las siguientes respuestas posibles:

Apple FaceTime will be allowed, based on the Apple filter configuration.
Apple FaceTime will be allowed, based on the Categories configuration.
Apple FaceTime will be blocked, based on the Excessive-Bandwidth filter
configuration.
Apple FaceTime will be allowed only if the Apple filter in Application and Filter
Overrides is set to Allow.

Explicación

Pregunta 62 de 64

Which statement is correct regarding the security fabric?

Selecciona una de las siguientes respuestas posibles:

FortiGate devices must be operating in NAT mode
FortiGate Cloud cannot be used for logging purposes.
FortiManager is one of the required member devices
A minimum of two Fortinet devices is required.

Explicación

Pregunta 63 de 64

Refer to the exhibit
In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output shown in the exhibit.

Selecciona una de las siguientes respuestas posibles:

Run a sniffer on the web server
Capture the traffic using an external sniffer connected to port1.
Execute another sniffer on FortiGate, this time with the filter "host 10.0.1.10" .
Execute a debug flow

Explicación

Pregunta 64 de 64

Refer to the exhibits Exhibit A
The exhibits show the firewall policies and the objects used in the firewall policies.
The administrator is using the Policy Lookup feature and has entered the search criteria shown in the exhibit.
Which policy will be highlighted, based on the input criteria?

Selecciona una de las siguientes respuestas posibles:

Policies with ID 2 and 3.
Policy with ID 1.
Policy with ID 4.
Policy with ID 5.

Explicación

Revisar respuesta

["https://cdn.goconqr.com/uploads/media/image/50653039/desktop_3772869b-8269-4d5f-a019-918dde182ae8.png","https://cdn.goconqr.com/uploads/media/image/50653090/desktop_23851695-3b55-4a27-905e-af106a9ba625.png","https://cdn.goconqr.com/uploads/media/image/50653092/desktop_1635f21a-a457-4aa6-a72c-d4b425b5c484.png","https://cdn.goconqr.com/uploads/media/image/50653100/desktop_423c3646-3076-40ad-8c50-8817cbf90808.png","https://cdn.goconqr.com/uploads/media/image/50654016/desktop_f246a362-97e2-4781-9fe8-90c4d2e5c69d.png","https://cdn.goconqr.com/uploads/media/image/50653132/desktop_0069be04-856e-4aef-83ff-04231071125d.png","https://cdn.goconqr.com/uploads/media/image/50653136/desktop_5702d794-2f67-47d6-8667-572ee16cd73d.png","https://cdn.goconqr.com/uploads/media/image/50653179/desktop_c9210f54-4d94-4e1c-8f78-685b688eed3c.png","https://cdn.goconqr.com/uploads/media/image/50653199/desktop_0623ab79-f7c0-4117-898f-36e512e6c7b8.png","https://cdn.goconqr.com/uploads/media/image/50653215/desktop_5aaafa33-a17f-43f1-a4f6-b0a38bd06729.png","https://cdn.goconqr.com/uploads/media/image/50654040/desktop_14b7b4f9-b0a8-40c4-9ce2-970162a94c97.png","https://cdn.goconqr.com/uploads/media/image/50653242/desktop_07b4a64c-3b2f-4035-a30d-c45f782ab7f6.png","https://cdn.goconqr.com/uploads/media/image/50653249/desktop_9799be23-984a-454f-9d17-3c29747be278.png","https://cdn.goconqr.com/uploads/media/image/50653805/desktop_6c3b7870-c7c7-4c0c-8ae6-d169d4a3d7d6.png","https://cdn.goconqr.com/uploads/media/image/50654053/desktop_00b22241-92da-405c-a389-2ad1db298e32.png","https://cdn.goconqr.com/uploads/media/image/50654058/desktop_21b710b9-1c27-49ea-b21c-41c2ae9ddc19.png","https://cdn.goconqr.com/uploads/media/image/50653858/desktop_f4560b93-81de-44ed-ac8c-4a067ea8e0a3.png","https://cdn.goconqr.com/uploads/media/image/50654068/desktop_cfc2beeb-2961-4346-a7fa-66790d1df0d7.png","https://cdn.goconqr.com/uploads/media/image/50654071/desktop_44cddf2b-4ad9-4c43-bdce-9fead1d9d67e.png","https://cdn.goconqr.com/uploads/media/image/50654079/desktop_11b27bcd-23e6-4cfc-98b4-f0b9c18b2d27.png","https://cdn.goconqr.com/uploads/media/image/50654084/desktop_d34ac431-20b8-4e76-834f-52f3c5e1d54c.png","https://cdn.goconqr.com/uploads/media/image/50653898/desktop_68a70e60-252c-460d-99e9-0707c960d6e8.png","https://cdn.goconqr.com/uploads/media/image/50653909/desktop_f8e8e0ea-7674-4d03-8abd-a8df6ef1b2b2.png","https://cdn.goconqr.com/uploads/media/image/50654098/desktop_a0dd71f4-a622-4ae2-9ca2-ba0bf7fa5098.png"]

	Creado por Lucas Roveda hace 9 meses

Treinamento prova NSE 4 (7.2)

Simulado NSE 4 (7.2)

Pregunta 1 de 64

An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway What must the administrator do to achieve this objective?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 2 de 64

What is a reason for triggering IPS fail open?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 64

An organization requires remote users to send external application data running on their PCs and access FTP resources through an SSL/TLS connection Which FortiGate configuration can achieve this goal?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 64

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 64

What are two features of collector agent advanced mode? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 64

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 64

A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors. What is the reason for the certificate warning errors?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 64

Which three methods are used by the collector agent for AD polling? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 64

Refer to the exhibit Based on the administrator profile settings. what permissions must the administrator set torun the diagnose firewall auth list CLI command on FortiGate?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 64

Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 64

What is the primary FortiGate election process when the HA override setting is disabled?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 64

Refer to the exhibit, which contains a static route configuration An administrator created a static route for Amazon Web Services. Which CLI command must the administrator use to view the route?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 64

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 14 de 64

How can you disable RPF checking?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 15 de 64

You have enabled logging on a FortiGate device for event logs and all security logs, and you have set up logging to use the FortiGate local disk What is the default behavior when the local disk is full?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 16 de 64

Which timeout setting can be responsible for deleting SSL VPN associated sessions?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 17 de 64

An administrator wants to simplify remote access without asking users to provide user credentials Which access control method provides this solution?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 18 de 64

Refer to the exhibits The exhibits show a firewall policy (ExhibitA ) and an antivirus profile (Exhibit B) Why is the user unable to receive a block replacement message when downloading an infected file for the first time?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 19 de 64

Refer to the exhibits The exhibits contain a network interface configuration, firewall policies, and a CLI : console configuration How will the FortiGate device handle user authentication for traffic that arrives on the LAN interface?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 20 de 64

Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 21 de 64

An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway
What must the administrator do to achieve this objective?

An organization requires remote users to send external application data running on their PCs and access FTP resources through an SSL/TLS connection

Which FortiGate configuration can achieve this goal?

A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors.
What is the reason for the certificate warning errors?

Refer to the exhibit
Based on the administrator profile settings. what permissions must the administrator set
torun the diagnose firewall auth list CLI command on FortiGate?

Refer to the exhibit, which contains a static route configuration
An administrator created a static route for Amazon Web Services.
Which CLI command must the administrator use to view the route?

You have enabled logging on a FortiGate device for event logs and all security logs, and you have set up logging to use the FortiGate local disk
What is the default behavior when the local disk is full?

An administrator wants to simplify remote access without asking users to provide user credentials
Which access control method provides this solution?

Refer to the exhibits
The exhibits show a firewall policy (ExhibitA ) and an antivirus profile (Exhibit B)
Why is the user unable to receive a block replacement message when downloading an
infected file for the first time?

Refer to the exhibits
The exhibits contain a network interface configuration, firewall policies, and a CLI :
console configuration
How will the FortiGate device handle user authentication for traffic that arrives on the LAN interface?

Refer to the exhibits
An administrator creates a new address object on the root FortiGate (Local-FortiGate) in
the security fabric. After synchronization, this object is not available on the downstream & Qs
FortiGate (ISFW)
What must the administrator do to synchronize the address object?

Refer to the exhibit
The exhibit shows a diagram of a FortiGate device connected to the network and the
firewall policy and IP pool configuration on the FortiGate device
Which two actions does FortiGate take on internet traffic sourced from the subscribers?(Choose two.)

FortiGate is integrated with FortiAnalyzer and FortiManager
When a firewall policy is created, which attribute is added to the policy to improve functionality and to support recording logs to FortiAnalyzer or FortiManager?

Refer to the exhibit
Based on the raw log, what can you
conclude from the output? (Choose two.)

Refer to the exhibit
Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit
What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?

Refer to the exhibit to view the firewall policy
Why would the firewall policy not block a well-known virus. for example eicar?

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile
Which order must FortiGate use when the web filter profile has features such as safe search enabled?