70 - 410 QUIZ 1 - VOLUME 2

Por favor espera - en proceso…

Pregunta 1 de 47

You have a server named Server1 that runs Windows Server 2012 R2.
You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
Provide fault tolerance if a single disk fails.
Maximize the amount of files that can be stored in the storage space.
What should you create?

Selecciona una de las siguientes respuestas posibles:

A simple space
A spanned volume
A mirrored space
A parity space

Explicación

Pregunta 2 de 47

You have a server named Corel that has a Server Core Installation of Windows Server
2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different
third-party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network
adapter fails.
What should you use?

Selecciona una de las siguientes respuestas posibles:

New-NetSwitchTeam
Install-Feature
Add-NetSwitchTeamMember
Netsh.exe

Explicación

Pregunta 3 de 47

Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines
named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.

You need to configure VM4 to track the CPU, memory, and network usage.
What should you configure?

Selecciona una de las siguientes respuestas posibles:

NUMA topology
Resource control
Resource metering
Virtual Machine Chimney
The VLAN ID
Processor Compatibility
The startup order
Automatic Start Action
Integration Services

Explicación

Pregunta 4 de 47

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has
the virtual switches listed in the following table.

You create a virtual machine named VM1. VM1 has two network adapters. One network
adapter connects to vSwitch1. The other network adapter connects to vSwitch2. You
configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the
network.
What should you do on Server1?

Selecciona una de las siguientes respuestas posibles:

Run the Set-VmNetworkAdapter cmdlet.
Create a new virtual switch on Server1
Modify the properties of vSwitch1 and vSwitch2
Add a new network adapter to VM1.

Explicación

Pregunta 5 de 47

You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10
shared printers. You need to change the location of the spool folder.
What should you modify?

Selecciona una de las siguientes respuestas posibles:

The properties of the Print Spooler service
The Print Server Properties
The user environment variables
The PrintQueue.inf file

Explicación

Pregunta 6 de 47

Your network contains an Active Directory domain named contoso.com. All servers run
Windows Server 2012 R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard,
and then you click View script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?

Selecciona una de las siguientes respuestas posibles:

.bat
.cmd
.ps1
.xml

Explicación

Pregunta 7 de 47

The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit.
(Click the Exhibit button.)

The settings for Disk1.vhdx are configured as shown in the Disk1.vhdx exhibit. (Click the
Exhibit button.)

The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the
Exhibit button.)

Select Yes if the statement can be shown to be true based on the available information;
otherwise select No. Each correct selection is worth one point.

Selecciona una de las siguientes respuestas posibles:

a
b
see image for ans for answer

Explicación

Pregunta 8 de 47

You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB
disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Create a storage pool.
Convert the disk to a dynamic disk
Create a VHD, and then attach the VHD.
Convert the disk to a GPT disk.

Explicación

Pregunta 9 de 47

Your network contains an Active Directory domain named contoso.com. All domain
controllers run Windows Server 2012 R2.
You create and enforce the default AppLocker executable rules.
Users report that they can no longer execute a legacy application installed in the root of
drive C.
You need to ensure that the users can execute the legacy application.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Create a new rule
Delete an existing rule.
Modify the action of the existing rules.
Add an exception to the existing rules

Explicación

Pregunta 10 de 47

You have a server named Print1 that runs Windows Server 2012 R2.
On Print1, you share a printer named Printer1.
You need to ensure that only the members of the Server Operators group, the
Administrators group, and the Print Operators group can send print jobs to Printer1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Remove the permissions for the Creator Owner group.
Assign the Print permission to the Server Operators group.
Remove the permissions for the Everyone group.
Assign the Print permission to the Administrators group.

Explicación

Pregunta 11 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit. (Click the Exhibit button.)

You need to ensure that Server2 can be managed remotely by using Server Manager.
What should you do?

Selecciona una de las siguientes respuestas posibles:

On DC1, run the Enable-PSSessionConfiguration cmdlet.
On Server2, run the Add-Computer cmdlet.
On Server2 modify the membership of the Remote Management Users group
From Active Directory Users and Computers, add a computer account named Server2,
and then restart Server2.

Explicación

Pregunta 12 de 47

Your network contains a server named Server1 and 10 Web servers. All servers run
Windows Server 2012 R2.
You create a Windows PowerShell Desired State Configuration (DSC) to push the settings
from Server1 to all of the Web servers.
On Server1, you modify the file set for the Web servers.
You need to ensure that all of the Web servers have the latest configurations.
Which cmdlet should you run on Server1?

Selecciona una de las siguientes respuestas posibles:

Get-DcsConfiguration
Restore-DcsConfiguration
Set-DcsLocalConfigurationManager
Start-DcsConfiguration

Explicación

Pregunta 13 de 47

You are configuring a test network. The test network contains a subnet named LAN1. LAN1
uses the network ID of 10.10.1.0/27.
You plan to add a new subnet named LAN2 to the test network.
LAN1 and LAN2 will be connected by a router.
You need to identify a valid network ID for LAN2 that meets the following requirements:
Ensures that hosts on LAN2 can communicate with hosts on LAN1.
Supports at least 100 IPv4 hosts.
Uses only private IP addresses.
Which network ID should you use?
To answer, drag the appropriate network ID and subnet mask to the correct location in the
answer area.

Selecciona una o más de las siguientes respuestas posibles:

10.10.1.128
255.255.255.128
255.255.0.0
255.255.255.0
255.255.255.192
10.10.1.0
10.10.1.16
10.10.1.192

Explicación

Pregunta 14 de 47

Your network contains an Active Directory domain named contoso.com. The network
contains 500 client computers that run Windows 8. All of the client computers connect to
the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the
DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client
computers.
What should you do on Server1?

Selecciona una de las siguientes respuestas posibles:

Create a primary zone named “root”.
Create a primary zone named "GlobalNames".
Create a forwarder that points to 169.254.0.1.
Create a primary zone named “.”.

Explicación

Pregunta 15 de 47

Your network contains an Active Directory forest named contoso.com. The forest contains
five domains. All domain controllers run Windows Server 2012 R2.
The contoso.com domain contains two user accounts named Admin1 and Admin2.
You need to ensure that Admin1 and Admin2 can configure hardware and services on all of
the member servers in the forest. The solution must minimize the number of privileges
granted to Admin1 and Admin2.
Which built-in groups should you use?

Selecciona una de las siguientes respuestas posibles:

Administrators local groups
Administrators domain local groups
Domain Admins global groups
Server Operators global groups

Explicación

Pregunta 16 de 47

You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the
Print and Document Services server role installed.
Server1 is connected to two identical print devices.
The solution must ensure that if one print device fails, the print jobs will print automatically
on the other print device.
What should you do on Server1?

Selecciona una de las siguientes respuestas posibles:

Add two printers and configure the priority of each printer.
Add one printer and configure printer pooling.
Install the Network Load Balancing (NLB) feature, and then add one printer
Install the Failover Clustering feature, and then add one printer

Explicación

Pregunta 17 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the
Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1. You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?

Selecciona una de las siguientes respuestas posibles:

BIOS
Network Adapter
COM 1
Processor

Explicación

Pregunta 18 de 47

You have a server named Server 1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters and is located in a perimeter network. You need to
install a DHCP Relay Agent on Server1.

Which node should you use to add the DHCP Relay Agent? To answer, select the
appropriate node in the answer area.

Selecciona una de las siguientes respuestas posibles:

General
Static Routes
NAT

Explicación

Pregunta 19 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains 25 servers. All servers run Windows Server 2012 R2.
You need to create a Windows Firewall rule to prevent administrators from using Internet
Explorer to access the Internet while they are logged on interactively to the servers. The
solution must not prevent administrators from accessing websites on the internal network.
How should you configure the rule?
To answer, select the appropriate options in the answer area.

Selecciona una o más de las siguientes respuestas posibles:

Inbound
Outbound
Port
Program
Domain
Private
Public

Explicación

Pregunta 20 de 47

Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1. You verify
that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk
file.
The solution must minimize the amount of downtime on VM1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From a command prompt, run dism.exe and specify the /delete-image parameter.
From a command prompt, run dism.exe and specify the /commit-image parameter
From Hyper-V Manager, delete the checkpoint
From Hyper-V Manager, inspect the virtual hard disk.

Explicación

Pregunta 21 de 47

You have a file server named Server1 that runs Windows Server 2012 R2. Server1
contains a folder named Folder1

A user named User1 is a member of Group1 and Group2. A user named User2 is a
member of Group2 and Group3.
You need to identify which actions the users can perform when they access the files in
Share1.
What should you identify?
To answer, select the appropriate actions for each user in the answer area.

Selecciona una de las siguientes respuestas posibles:

answer above
see image

Explicación

Pregunta 22 de 47

Your network contains a subnet named Subnet1. Subnet1 contains a DHCP server named
Server1.
You deploy a new subnet named Subnet2. On Subnet2, you deploy a new server named
Server2 that runs Windows Server 2012 R2.
You need to configure Server2 to route DHCP broadcast from Subnet2 to Server1.
Which server role should you install on Server2?
To answer, select the appropriate role in the answer area.

Selecciona una de las siguientes respuestas posibles:

Remote Desktop Services
Remote Access
Network Policy and Access services
Web Server IIS

Explicación

Pregunta 23 de 47

Your company has a main office and four branch offices. The main office contains a server
named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.

You need to add a single static route on Server1 to ensure that Server1 can communicate
with the hosts on all of the subnets.
Which command should you run?

Selecciona una de las siguientes respuestas posibles:

route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
answer explained

Explicación

Pregunta 24 de 47

You are configuring the IPv6 network infrastructure for a branch office.
The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for
use in the branch office.
You need to identify the maximum number of IPv6 subnets you can create.
How many IPv6 subnets should you identify?

Selecciona una de las siguientes respuestas posibles:

32
64
128
1024

Explicación

Pregunta 25 de 47

Your network contains several servers that run Windows Server 2012 R2 and client
computers that run Windows 8.1.
You download several signed Windows PowerShell scripts from the Internet.
You need to run the PowerShell scripts on all of the servers and all of the client computers.
What should you modify first?

Selecciona una de las siguientes respuestas posibles:

The environment variables on all of the servers
The execution policy on all of the servers
The execution policy on all of the client computers
The environment variables on all client computers

Explicación

Pregunta 26 de 47

You have a server named Server1 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server1 and creates a new volume. The
properties of the new volume are shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can enable NTFS disk quotas for volume D.
What should you do first?

Selecciona una de las siguientes respuestas posibles:

Install the File Server Resource Manager role service
Format volume D.
Run the convert.exe command
Convert the disk to a dynamic disk.

Explicación

Pregunta 27 de 47

Your network contains an Active Directory domain named adatum.com. The domain
contains a member server named Server1 and a domain controller named DC2.All servers
run Windows Server 2012 R2.
On DC2, you open Server Manager and you add Server1 as another server to manage.
From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the
Exhibit button.)

You need to ensure that when you right-click Server1, you see the option to run the DHCP
console.
What should you do?

Selecciona una de las siguientes respuestas posibles:

In the domain, add DC2 to the DHCP Administrators group
On Server1, install the Feature Administration Tools
On DC2 and Server1, run winrmquickconfig.
On DC2, install the Role Administration Tools.

Explicación

Pregunta 28 de 47

Your network contains three servers that run Windows Server 2012 R2. The servers are
configured as shown in the following table.

Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?

Selecciona una de las siguientes respuestas posibles:

A reservation
A filter
A scope option
An exclusion

Explicación

Pregunta 29 de 47

Your network contains an Active Directory domain named adatum.com. The domain
contains a member server named L0N-DC1. L0N-DC1 runs Windows Server 2012 R2 and
has the DHCP Server server role installed.
The network contains 100 client computers and 50 IP phones. The computers and the
phones are from the same vendor.
You create an IPv4 scope that contains addresses from 172.16.0.1 to 172.16.1.254.
You need to ensure that the IP phones receive IP addresses in the range of 172.16.1.100
to 172.16.1.200. The solution must minimize administrative effort.
What should you create?

Selecciona una de las siguientes respuestas posibles:

Server level policies
Reservations
Filters
Scope level policies

Explicación

Pregunta 30 de 47

Your network contains an Active Directory domain named contoso.com.
You need to identify whether the Company attribute replicates to the global catalog.
Which part of the Active Directory partition should you view?
To answer, select the appropriate Active Directory object in the answer area.

Selecciona una de las siguientes respuestas posibles:

RootDSE
Schema
ForestDNS Zones
DomainDNS Zones
Configuration
Default naming Content

Explicación

Pregunta 31 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share
– Advanced option.
You need to ensure that you can use SMB Share – Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?

Selecciona una de las siguientes respuestas posibles:

Configure the Advanced system settings
Run the Install-WindowsFeature cmdlet
Run the Set-SmbShare cmdlet
Install the Share and Storage Management tool.

Explicación

Pregunta 32 de 47

Your network contains an Active Directory domain named contoso.com.
An organizational unit (OU) named OU1 contains user accounts and computer accounts.
A Group Policy object (GPO) named GP1 is linked to the domain.GP1 contains Computer
Configuration settings and User Configuration settings.

You need to prevent the User Configuration settings in GP1 from being applied to users.
The solution must ensure that the Computer Configuration settings in GP1 are applied to all
client computers.
What should you configure?

Selecciona una de las siguientes respuestas posibles:

The GPO Status
The Block Inheritance feature
The Group Policy loopback processing mode
The Enforced setting

Explicación

Pregunta 33 de 47

Your network contains an Active Directory domain named contoso.com.
All of the AppLocker policy settings for the member servers are configured in a Group
Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer
policy.
You need to merge the local AppLocker policy settings from Server1 into the AppLocker
policy settings of GPO1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by
using Group Policy Management Editor.
From Server1, run the Set-ApplockerPolicy cmdlet
From Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by
using Group Policy Management Editor.
From Server1, run the New-ApplockerPolicy cmdlet.

Explicación

Pregunta 34 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2 and a server named
Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are
member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed
remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the
solution.Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

Run the systempropertiesremote. execommand
Run the Fnable-PsRemoting cmdlet.
Run the Enable-PsSessionConfigurationcmdlet
Run the Confiqure-SMRemoting.ps1script.
Run the Set-ExecutionPolicycmdlet.

Explicación

Pregunta 35 de 47

You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail.
The solution must minimize the number of disks used to create the volume.
Which three actions should you perform in sequence?

Selecciona una o más de las siguientes respuestas posibles:

Add five physical disks
Create a storage space and set the disk allocation of one of the disks to "Hot Spare"
Create a virtual disk
Create a storage space by using the default disk allocation
Add three physical disks

Explicación

Pregunta 36 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. The domain contains a standalone server named
Server2 that is located in a perimeter network. Both servers run Windows Server 2012 R2.
You need to manage Server2 remotely from Server1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Server1, run the Enable-PsRemotingcmdlet
From Server2, run the winrm command.
From Server2/ run the Enable-PsRemotingcmdlet
From Server1, run the winrm command.

Explicación

Pregunta 37 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a windows PowerShell script named Scriptl.psl that contains the following
configuration:

You need to apply the configuration to Server1. The solution must ensure that the
configuration on Server1 can be updated by modifying a MOF file on Server2.
Which actions should you perform on each server?
To answer, select the appropriate server on which to perform each action in the answer
area.

Selecciona una de las siguientes respuestas posibles:

answer above
a

Explicación

Pregunta 38 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains 20 computer accounts that reside in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to assign
several user rights to a user named User1.

In the Users container, you create a new user named User2.
You need to ensure that User2 is assigned the same user rights as User1 on all of the
client computers in OU1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

Modify the settings in GPO1.
Modify the link of GPO1.
Link a WMI filter to GPO1
Move User2 to OU1.

Explicación

Pregunta 39 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs a Server Core installation of Windows
Server 2012 R2.
You install the DNS Server server role on Server1.
You need to perform the following configurations on Server1:
Create an Active Directory-integrated zone named adatum.com.
Send unresolved DNS client queries for other domain suffixes to the DNS server of
your company's Internet Service Provider (ISP).
Which Windows PowerShell cmdlets should you use?
To answer, drag the appropriate cmdlet to the correct configuration in the answer area.
Each cmdlet may be used once, more than once, or not at all. You may need to drag the
split bar between panes or scroll to view content.

Selecciona una o más de las siguientes respuestas posibles:

Add-DNS Server Directory Partition
Add-DNS Server Primary Zone
Set - DNS Server
Set - DNS Server Forwarder
Set - DNS Server DS Setting
Set - DNS Server Setting

Explicación

Pregunta 40 de 47

You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the
Windows Deployment Services (WDS) server role installed.
You install the DHCP Server server role on Server1.
You need to ensure that Server1 can respond to DHCP clients and WDS clients.
What should you configure for the DHCP service and the WDS service?
To answer, configure the appropriate options in the answer area.

Selecciona una o más de las siguientes respuestas posibles:

Enable Option 60 PXEClient
Enable Option 067 Bootfile name
Enable Option 082 Relay Agent Information
Enable the Do not Listen on DHCP options
Disable the Do not Listen on DHCP options

Explicación

Pregunta 41 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec
connection.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Windows Firewall with Advanced Security, view the quick mode security
association
From Event Viewer, search the Application Log for events that have an ID of 1704.
From Event Viewer, search the Security Log for events that have an ID of 4672.
From Windows Firewall with Advanced Security, view the main mode security
association

Explicación

Pregunta 42 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully
from Computer1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Server Manager, review the properties of Computer1.
From Windows PowerShell, run the Get-SyncUserSettingscmdlet
From Windows PowerShell, run the Get-SyncSharecmdlet
From Server Manager, review the properties of User1.

Explicación

Pregunta 43 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains hundreds of groups, many of which are nested in other groups.
The domain contains a user account named user1.User1 is a direct member of 15 groups.
You need to identify of which Active Directory groups User1 is a member, including the
nested groups. The solution must minimize administrative effort.
Which tool should you use?

Selecciona una de las siguientes respuestas posibles:

Active Directory Users and Computers
ADSI Edit
Get-ADUser
Dsget

Explicación

Pregunta 44 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1
in Active Directory.
You need to provide a group named Group1 with the ability to manage Printer1.
What should you do?

Selecciona una de las siguientes respuestas posibles:

From Print Management, configure the Sharing settings of Printer1.
From Active Directory Users and Computers, configure the Security settings of Server1-
Printer1.
From Print Management, configure the Security settings of Printer1
From Print Management, configure the Advanced settings of Printer1.

Explicación

Pregunta 45 de 47

Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1
to the domain.
You need to ensure that you can view processor usage and memory usage information in
Server Manager.

What should you do?

Selecciona una de las siguientes respuestas posibles:

From Server Manager, click Configure Performance Alerts.
From Performance Monitor, create a Data Collector Set (DCS).
From Performance Monitor, start the System Performance Data Collector Set (DCS).
From Server Manager, click Start Performance Counters.

Explicación

Pregunta 46 de 47

Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a
virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The
solution must minimize the number of permissions assigned to User1.
To which group should you add User1?

Selecciona una de las siguientes respuestas posibles:

Hyper-V Administrators on Server1
Administrators on VM1
Server Operators on Server1
Power Users on VM1

Explicación

Pregunta 47 de 47

You have a server named Data1 that runs a Server Core Installation of Windows Server
2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2
Enterprise. You want to achieve this goal by using the minimum amount of administrative
effort.
What should you perform?

Selecciona una de las siguientes respuestas posibles:

a clean installation of Windows Server 2012
an offline servicing by using Dism
an online servicing by using Dism
an upgrade installation of Windows Server 2012

Explicación

Revisar respuesta

["https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441189/desktop_7e6fd258-0317-4e7a-951b-e35bd75c4752.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441195/desktop_cbbe5388-74e0-492b-b2de-3b930249ca9d.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441221/desktop_2ec9691f-980e-48bc-8c90-29e6b77f9454.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441263/desktop_b3d061ad-5a9a-4016-bd05-940a424afc20.png","https://cdn.goconqr.com/uploads/checkbox_question/image/2441287/desktop_dddada58-99c3-41d1-8bd1-8033018a8ab0.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441588/desktop_7181751e-4104-48cc-b8e6-10cd03662909.png","https://cdn.goconqr.com/uploads/checkbox_question/image/2441604/desktop_0affa96f-9480-4bf0-805e-912804f1e371.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2441645/desktop_95ae3d34-d4d2-4ebc-a1d5-40e8086c985e.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2442270/desktop_cec9bf7e-9447-4aa5-a324-8aa7a2ba7f9f.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2442312/desktop_8bdca44c-d885-4666-bb39-1a47f2aa5963.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2446535/desktop_cefdb681-6a38-4470-9266-cfedef942103.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2446536/desktop_59820bc1-0fed-4154-b2bd-f2e0487deadc.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2446539/desktop_0ee2f7f2-27b6-4c4a-8336-d1af22eef65f.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2446543/desktop_04c5bd07-b08e-433b-bd1c-d9e43fd5ceb5.png","https://cdn.goconqr.com/uploads/multiple_choice_question/image/2446553/desktop_0e91cb46-b545-4ee9-972e-760512809dc0.png","https://cdn.goconqr.com/uploads/checkbox_question/image/2446564/desktop_104beefb-dd27-4681-907c-bde38dc9677a.png","https://cdn.goconqr.com/uploads/checkbox_question/image/2446619/desktop_69d40606-4ecb-43a6-9cb3-3bfa7a74aed8.png","https://cdn.goconqr.com/uploads/quiz_answer/image/6272398/desktop_7b93d4fe-e2c5-4393-936d-5997c92ad853.png","https://cdn.goconqr.com/uploads/quiz_answer/image/6272399/desktop_b0c5be33-323d-4846-9e23-b9504a668528.png","https://cdn.goconqr.com/uploads/quiz_answer/image/6276255/desktop_909dd949-ab55-49a1-858d-e9b19eae78b9.png"]

	Creado por saheed Tijani hace casi 9 años

70-410 70-410 Test sobre 70 - 410 QUIZ 1 - VOLUME 2, creado por saheed Tijani el 27/01/2016.

70 - 410 QUIZ 1 - VOLUME 2

Pregunta 1 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 2 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 3 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 4 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 5 de 47

You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10 shared printers. You need to change the location of the spool folder. What should you modify?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 6 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 7 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 8 de 47

You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1. You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 9 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 10 de 47

You have a server named Print1 that runs Windows Server 2012 R2. On Print1, you share a printer named Printer1. You need to ensure that only the members of the Server Operators group, the Administrators group, and the Print Operators group can send print jobs to Printer1. What should you do?

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 11 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 12 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 13 de 47

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 14 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 15 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 16 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 17 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 18 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 19 de 47

Selecciona una o más de las siguientes respuestas posibles:

Explicación

Pregunta 20 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 21 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 22 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 23 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 24 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

Pregunta 25 de 47

Selecciona una de las siguientes respuestas posibles:

Explicación

You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10
shared printers. You need to change the location of the spool folder.
What should you modify?

You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB
disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?

You have a server named Print1 that runs Windows Server 2012 R2.
On Print1, you share a printer named Printer1.
You need to ensure that only the members of the Server Operators group, the
Administrators group, and the Print Operators group can send print jobs to Printer1.
What should you do?

Your network contains three servers that run Windows Server 2012 R2. The servers are
configured as shown in the following table.

Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1.
What should you create on Server1?

Your network contains an Active Directory domain named contoso.com.
You need to identify whether the Company attribute replicates to the global catalog.
Which part of the Active Directory partition should you view?
To answer, select the appropriate Active Directory object in the answer area.

You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail.
The solution must minimize the number of disks used to create the volume.
Which three actions should you perform in sequence?