groche
Test por , creado hace más de 1 año

(Chapter 3 - Computer assembly) Cisco IIT essentials Test sobre Quiz chapter 3 - Raheem, creado por groche el 27/03/2014.

378
0
0
groche
Creado por groche hace más de 10 años
Cerrar

Quiz chapter 3 - Raheem

Quiz chapter 3 - Raheem

Pregunta 1 de 9

1

A technician is troubleshooting a PC that will not boot. When the PC is powered on, it emits a series of beeps and indicates that the BIOS settings have changed and need to be reconfigured. The technician reconfigures the BIOS settings, saves them, and the computer boots. Later when the PC is powered off and back on again, the same error message appears, and all the BIOS changes are gone. What should the technician do to fix the problem?

Selecciona una de las siguientes respuestas posibles:

  • Reseat the RAM

  • Replace the motherboard

  • Replace the CMOS battery

  • Upgrade the BIOS firmware

Explicación

Pregunta 2 de 9

1

What is an important step when installing a second PATA hard drive in a computer?

Selecciona una de las siguientes respuestas posibles:

  • Set the swap file size on the new drive

  • Set the drive ID number with the correct jumper

  • Configure the BIOS settings to auto-detect the master drive

  • Ensure that pin one of the PATA data cable is correctly aligned with the connector

Explicación

Pregunta 3 de 9

1

What number of disks is the required minimum to implement RAID 0?

Selecciona una de las siguientes respuestas posibles:

  • 1

  • 2

  • 3

  • 4

Explicación

Pregunta 4 de 9

1

A technician is installing additional memory in a computer. How can the technician guarantee that the memory is correctly aligned?

Selecciona una de las siguientes respuestas posibles:

  • The label on the memory module should always face the CPU

  • A notch in the memory module should be aligned with a notch in the memory slot

  • The arrows on the memory module should be aligned with the arrows on the motherboard slot

  • Memory slots are color coded, with one end red and one end blue

Explicación

Pregunta 5 de 9

1

What is an advantage of using signed drivers?

Selecciona una de las siguientes respuestas posibles:

  • They are free of errors

  • They never need upgrading

  • They are guaranteed to work with all operating systems

  • They are verified to be compatible with the operating system

  • They are guaranteed by the manufacturer to work with any hardware

Explicación

Pregunta 6 de 9

1

Where is the saved BIOS configuration data stored?

Selecciona una de las siguientes respuestas posibles:

  • RAM

  • CMOS

  • cache

  • hard drive

Explicación

Pregunta 7 de 9

1

What are two examples of settings that can be changed in the CMOS settings? (Choose two.)

Selecciona una o más de las siguientes respuestas posibles:

  • drive partition size

  • device drivers

  • swap file size

  • enabling and disabling devices

  • boot order

Explicación

Pregunta 8 de 9

1

What are three important considerations when installing a CPU on a motherboard? (Choose three.)

Selecciona una o más de las siguientes respuestas posibles:

  • Antistatic precautions are taken.

  • The CPU is correctly aligned and placed in the socket.

  • The CPU contacts are first cleaned with isopropyl alcohol.

  • The CPU heat sink and fan assembly are correctly installed.

  • The CMOS EPROM battery is removed prior to installing the CPU.

  • Maximum insertion force is applied to the load lever so the CPU is locked in place.

Explicación

Pregunta 9 de 9

1

A technician has been asked to install a second optical drive in a computer. The technician will need to configure the drive as slave. How can the technician accomplish this desired configuration?

Selecciona una de las siguientes respuestas posibles:

  • Use jumpers on the motherboard to configure the drive as slave.

  • List the drive as slave in the CMOS.

  • Connect the drive after the twist in the PATA cable.

  • Use jumpers on the drive to configure the drive as slave.

Explicación

Anterior
Siguiente